**All Machines Available By Type**
Machine Tools
24/7 is your one stop
location source for used machinery.

"MachineID","TypeMachine","Year","Manufacturer","Model","Control","Condition","UnderPower","ShortSpecs","List","Code","Quote","Featured","Photos","Key1","Key2","Key3","Key4","Key5","Kdesc1","Kdesc2","Kdesc3","Kdesc4","Kdesc5"

9078,"AUTO CHUCKERS, SINGLE SPINDLE","1965","Warner and Swasey","2AB
3380",,"Good","Yes",,"1965 Warner and Swasey 2AB 3380
","A7113",$12500.00,"0","Yes","6""",,,,,"Swing","Turret Stoke","Slide
Stroke","Max. Length","HP"

9121,"AUTO CHUCKERS, SINGLE SPINDLE",,"Warner and Swasey","2AC
M-3200",,"Fair","No",," Warner and Swasey 2AC M-3200
","A7113",,"0","Yes","19 1/4""",,,"18""","25","Swing","Turret
Stoke","Slide Stroke","Max. Length","HP"

7989,"AUTO CHUCKERS, SINGLE SPINDLE",,"Warner and Swasey","2AC
M-3920",,"Very Good","Yes",," Warner and Swasey 2AC M-3920
","A7113",$9500.00,"0","Yes","19 1/4""",,,"18""","25","Swing","Turret
Stoke","Slide Stroke","Max. Length","HP"

8762,"AUTO SCREW MACHINES, MULTI.
SPINDLE","1966","Acme-Gridley","RB-8",,"Good","Yes",,"1966 Acme-Gridley
RB-8 ","A8006",$49500.00,"0","Yes","2 5/8""","8""","982","40","8","Max.
Dia.","Length","RPM","HP","Spindles"

8916,"AUTO SCREW MACHINES, MULTI.
SPINDLE",,"Acme-Gridley","RB-6",,"Good","Yes",," Acme-Gridley RB-6
","A8006",$14500.00,"0","Yes","2 5/8""","11""","1,065","40","6","Max.
Dia.","Length","RPM","HP","Spindles"

8769,"AUTO SCREW MACHINES, MULTI. SPINDLE","1967","Conomatic","Model
CS",,"Good","Yes",,"1967 Conomatic Model CS
","A8006",$24500.00,"0","Yes","3 1/4""","8""","982","40","8","Max.
Dia.","Length","RPM","HP","Spindles"

8197,"AUTO SCREW MACHINES, SINGLE SPINDLE","1972","Brown and
Sharpe","#2",,"Very Good","Yes","1 1/4"" Capacity, 3.5"" Chucking
Length, 3,503 RPM, 7.5 HP, 8 Position Turret, Change Gears, Coolant,
Vertical Cross Slide","1972 Brown and Sharpe #2
","A8125",$4500.00,"-1","Yes","1",,,,,"Max.
Dia.","Length","RPM","Tools","HP"

9352,"AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB
SPDL","1993","Citizen","E-32 Type IV","Mitsubishi Meldas 330
HLC","Good","Yes","Max. Dia. 1.26"", Max Length 12.6"", 130 - 6,000 RPM,
9.8 HP, Sub Spindle, Live Tool Machine, Iemica Boss 542/37 Barfeed, Many
Extras","1993 Citizen E-32 Type IV Mitsubishi Meldas 330
HLC","A8175MS",$38500.00,"0","Yes","1.26""","12.6""","6,000","7.5","20","Max.
Dia.","Length","RPM","HP","Tools"

9942,"AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB
SPDL","1999","Citizen","L-20 Type VII","Cincom System
L","Good","Yes","Max. Work Dia., 0.787"", Max. Length 7.87"", 8,000 RPM,
2 HP, Live Tooling, Sub-Spindle, FMB Barfeed, NOTE: Machine Ran for Two
(2) Days Only. (lost contract for job)","1999 Citizen L-20 Type VII
Cincom System
L","A8175MS",$79900.00,"0",,"0.787""","8.1""","10,000","2","22","Max.
Dia.","Length","RPM","HP","Tools"

10100,"AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB
SPDL","2000","Hardinge","Conquest ST-225 B","Fanuc 18iT","Very
Good","Yes",,"2000 Hardinge Conquest ST-225 B Fanuc
18iT","A8175MS",$52500.00,"0","Yes","1""","9.65""","8,000","7.3","16","Max.
Dia.","Length","RPM","HP","Tools"

9754,"AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB
SPDL","1984","Star","VNC-20","Fanuc 3T",,"Yes",,"1984 Star VNC-20 Fanuc
3T","A8175MS",,"-1","On Way","3/4""","6""","7,500","5","18","Max.
Dia.","Length","RPM","HP","Tools"

9789,"AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB
SPDL","2000","Star","SV-32J","Fanuc 18iT","Very Good","Yes",,"2000 Star
SV-32J Fanuc
18iT","A8175MS",$105000.00,"0","Yes","1.25""","12.203""","7,000","10","12","Max.
Dia.","Length","RPM","HP","Tools"

10268,"AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB
SPDL","2005","Tsugami","BE-19B III","Fanuc 32iA","Excellent","Yes","Work
Diameter 0.118"" - 0.748"", 200 - 12,000 RPM, 5 HP Main 2.95 HP Sub,
Nice Tooling Package, 6,000 Run Time Hours","2005 Tsugami BE-19B III
Fanuc
32iA","A8175MS",$86500.00,"0","Yes","0.118""","6.69""","12,000","5","23","Max.
Dia.","Length","RPM","HP","Tools"

9201,"AUTO SCREW MACHINES, SWISS, CNC-SUB
SPINDLE","1988","Tsugami","NP-11","Fanuc 0T","Good","Yes",,"1988 Tsugami
NP-11 Fanuc
0T","A8175S",$14500.00,"0","Yes","0.475""","4.724""","12,000",,,"Max.
Dia.","Length","RPM",,

8636,"AUTOMATIC SCREW MACHS., MULT. SPDL., NC and
CNC","1997","Mitsubishi","M-T42E","Fanuc 15TTF","Very Good","Yes",,"1997
Mitsubishi M-T42E Fanuc 15TTF","A8050",$115000.00,"0","Yes","3
1/4""","4.7""","2,800","3""","6","Max. Dia.","Length","RPM","Spindle
Bore","Spindles"

8635,"AUTOMATIC SCREW MACHS., MULT. SPDL., NC and
CNC","1996","Mitsubishi","M-T35E","Fanuc 15TTF","Very Good","Yes",,"1996
Mitsubishi M-T35E Fanuc
15TTF","A8050",$115000.00,"0","Yes","3""","4.7""","2,800","3""","6","Max.
Dia.","Length","RPM","Spindle Bore","Spindles"

9070,"BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and
MECHANICAL","2003","Haas","Servo Bar 300",,"Very Good","No",,"2003 Haas
Servo Bar 300 ","B1120",$4950.00,"0","Yes","3 1/8""","60""","1",,,"Max.
Bar","Length","Tubes",,

6416,"BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and
MECHANICAL","2004","Haas","Servo Bar 300",,"Excellent","Yes","Bar
Capacity 1/4"" to 3-1/8"", Maximum Bar Length 60"", Barfeed in Very Good
Condition","2004 Haas Servo Bar 300 ","B1120",$6500.00,"-1","Yes","3
1/8""","60""","1",,,"Max. Bar","Length","Tubes",,

9806,"BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and
MECHANICAL","2003","Iemca","Prodigy 547/21",,"Excellent","No",,"2003
Iemca Prodigy 547/21
","B1120",$8500.00,"-1","Yes","1.85039""","6'","1",,,"Max.
Bar","Length","Tubes",,

8195,"BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and
MECHANICAL","2002","Iemca","AS 325 Type 52",,"Excellent","Yes","0.118""
to 0.98425"" Capacity, 205"" Bar Length","2002 Iemca AS 325 Type 52
","B1120",$14000.00,"-1","Yes","0.98425""","205""","1",,,"Max.
Bar","Length","Tubes",,

10167,"BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and
MECHANICAL","200?","LNS","Quick Load Servo S3",,"Very Good","No",,"200?
LNS Quick Load Servo S3 ","B1120",,"-1","On
Way","4""","63""","1",,,"Max. Bar","Length","Tubes",,

9985,"BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and
MECHANICAL","1996","LNS","Sprint S2",,"Good","Yes",,"1996 LNS Sprint S2
","B1120",$8200.00,"0","Yes","3 1/8""","73""","1",,,"Max.
Bar","Length","Tubes",,

9338,"BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and
MECHANICAL","1992","LNS","Sprint 2 HydroBar",,"Good","Yes","1/2"" to 3
1/8"" Capacity, 12' Bar Length, Bar Storage Rack, Auto Load, PLC
Interface, Extra Push Rods, Bar Blocks, Complete Hydraulics","1992 LNS
Sprint 2 HydroBar ","B1120",$6800.00,"0","Yes","3
1/8""","12'","1",,,"Max. Bar","Length","Tubes",,

8310,"BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and
MECHANICAL","2001","LNS","Quick Load Servo S2",,"Like New",,,"2001 LNS
Quick Load Servo S2 ","B1120",$12500.00,"-1","Yes","2
1/2""","55""","1",,,"Max. Bar","Length","Tubes",,

9491,"BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and
MECHANICAL","1992","LNS","Sprint 2 HydroBar",,"Good","No","1/2"" to 3
1/8"" Capacity, 12' Bar Length, Bar Storage Rack, Auto Load, PLC
Interface, Extra Push Rods, Bar Blocks, Complete Hydraulics","1992 LNS
Sprint 2 HydroBar ","B1120",$7500.00,"-1","Yes","3
1/8""","12'","1",,,"Max. Bar","Length","Tubes",,

6939,"BENDERS, PIPE and TUBE","1999","Addison","DB-120",,"Very
Good","Yes",,"1999 Addison DB-120 ","B1804",$149500.00,"0","No","4
1/2""","40""","157.6""","40",,"Capacity","Max. Radius","Max.
Length","HP",

8145,"BORING MILLS, HORIZ, FLOOR TYPE CNC and
NC","1980/2000","Lucas","6""","Delta Dynapath
50","Good","Yes",,"1980/2000 Lucas 6"" Delta Dynapath
50","B5420",$189500.00,"0","Yes","6""","50","1,152","40",,"Spindle","Taper","RPM","HP","Table"

8082,"BORING MILLS, HORIZ, FLOOR TYPE CNC and
NC","1981/2004","Mitsubishi","MAF-150RS","Fanuc
16M","Good","No",,"1981/2004 Mitsubishi MAF-150RS Fanuc
16M","B5420",$410000.00,"0","Yes","5.9""","50","1,450","40","62.99"" x
62.99""","Spindle","Taper","RPM","HP","Table"

10089,"BORING MILLS, HORIZ, FLOOR TYPE CNC and
NC","1964/2007","Scharmann","WF-132","Heidenhain
TNC-320","Excellent","Yes",,"1964/2007 Scharmann WF-132 Heidenhain
TNC-320","B5420",$265000.00,"-1","Yes","5
1/4""","50","1,000","60","300"" x
96""","Spindle","Taper","RPM","HP","Table"

7677,"BORING MILLS, HORIZ, FLOOR TYPE CNC W-ATC","1981","Giddings and
Lewis","G-50-TX","Giddings & Lewis 800B","Good","Yes","5"" Spindle, 50
Taper, 1,400 RPM, 30 HP, 96"" x 72"" 36"" x 56"" Travels, Two (2) 48"" x
72"" Pallet Shuttle Tables, Full Forth Rotary Table, 100 ATC, Steel Way
Covers, Chip Conveyor","1981 Giddings and Lewis G-50-TX Giddings & Lewis
800B","B5420A",$225000.00,"-1","Yes","5""","50","1,400","30","48"" x
72""","Spindle","Taper","RPM","HP","Table"

7393,"BORING MILLS, HORIZ, FLOOR TYPE CNC
W-ATC","1981","Mitsubishi","MQF-150","Allen Bradley 7320","Neds
Repair","No","5.905"" Spindle, 50 Taper, 2,000 RPM, 50 HP, 137.79"" x
86.61"" x 13.77"" x 27.55"" Travels, 42"" x 140"" Table, Hydrostatic
Bearings All Axes, Full Three Axis NC Control, Chip Conveyor","1981
Mitsubishi MQF-150 Allen Bradley
7320","B5420A",$95000.00,"-1","Yes","5.905""","50","2,000","50","42"" x
140""","Spindle","Taper","RPM","HP","Table"

9286,"BORING MILLS, HORIZ, TABLE TYPE","1964","Bullard","Model
75",,"Very Good","Yes",,"1964 Bullard Model 75
","B5500",$26500.00,"0","Yes","5""","50","1,800","50","84"" x
48""","Spindle","Taper","RPM","HP","Table"

9883,"BORING MILLS, HORIZ, TABLE
TYPE","1986/2010","Cincinnati-Gilbert","Model D",,"Re-Built To
New","Yes",,"1986/2010 Cincinnati-Gilbert Model D
","B5500",$149000.00,"0","Yes","6""","50","1,130","40","60"" x
120""","Spindle","Taper","RPM","HP","Table"

8337,"BORING MILLS, HORIZ, TABLE TYPE",,"Giddings and
Lewis","300-T",,"Very Good","Yes",," Giddings and Lewis 300-T
","B5500",$36500.00,"0","Yes","3""","5 MT","1,600","10","72"" x
36""","Spindle","Taper","RPM","HP","Table"

9886,"BORING MILLS, HORIZ, TABLE TYPE","1978","Giddings and
Lewis","H-5-T",,"Very Good","Yes",,"1978 Giddings and Lewis H-5-T
","B5500",$139500.00,"0","Yes","5""","50","1,020","40","48"" x
122""","Spindle","Taper","RPM","HP","Table"

9136,"BORING MILLS, HORIZ, TABLE TYPE","1975","Giddings and
Lewis","70A-G5-T",,"Very Good","Yes",,"1975 Giddings and Lewis 70A-G5-T
","B5500",$64500.00,"0","Yes","5""","50","975","40","96"" x
48""","Spindle","Taper","RPM","HP","Table"

9660,"BORING MILLS, HORIZ, TABLE TYPE","1967","Giddings and
Lewis","70-D4-7",,"Good","Yes",,"1967 Giddings and Lewis 70-D4-7
","B5500",$34500.00,"0","Yes","4""","50","1,300","20","78"" x
48""","Spindle","Taper","RPM","HP","Table"

6636,"BORING MILLS, HORIZ, TABLE TYPE","1967","Giddings and
Lewis","330-T",,"Good","Yes",,"1967 Giddings and Lewis 330-T
","B5500",$15000.00,"-1","Yes","3""","5","500","10","62"" x
30""","Spindle","Taper","RPM","HP","Table"

9444,"BORING MILLS, HORIZ, TABLE TYPE","1974","Giddings and
Lewis","75-H6-T",,"Good","Yes",,"1974 Giddings and Lewis 75-H6-T
","B5500",$99500.00,"0","Yes","6""","50","1,020","40","120"" x
60""","Spindle","Taper","RPM","HP","Table"

7751,"BORING MILLS, HORIZ, TABLE TYPE",,"Giddings and
Lewis","560T",,"Good","Yes",," Giddings and Lewis 560T
","B5500",$50000.00,"0","Yes","5""","7 MT","1,500","40","164"" x
72""","Spindle","Taper","RPM","HP","Table"

6635,"BORING MILLS, HORIZ, TABLE TYPE","1952","Giddings and
Lewis","350-T",,"Good","No","5"" Spindle, # 6 Morse, 375 RPM, 15 HP,
60"" x 120 Table, 108"" x 60"" x 36"" x 96"" Travels, Three (3) Axis
DRO's, Outrigger Support","1952 Giddings and Lewis 350-T
","B5500",$25000.00,"-1","Yes","5""","6 MT","375","15","60"" x
120""","Spindle","Taper","RPM","HP","Table"

8234,"BORING MILLS, HORIZ, TABLE TYPE","1965","Giddings and
Lewis","65-H-6T",,"Good","Yes",,"1965 Giddings and Lewis 65-H-6T
","B5500",$148000.00,"0","Yes","6""","50","1,020","30","60"" x
144""","Spindle","Taper","RPM","HP","Table"

8231,"BORING MILLS, HORIZ, TABLE TYPE","1969","Giddings and
Lewis","DA5-T5",,"Good","Yes",,"1969 Giddings and Lewis DA5-T5
","B5500",$59500.00,"0","Yes","5""","6 MT","1,000","15","98"" x
48""","Spindle","Taper","RPM","HP","Table"

8227,"BORING MILLS, HORIZ, TABLE TYPE",,"Giddings and
Lewis","570-T",,"Good","Yes",," Giddings and Lewis 570-T
","B5500",$26000.00,"0","Yes","7""","7 MT","300",,"140"" x
60""","Spindle","Taper","RPM","HP","Table"

6637,"BORING MILLS, HORIZ, TABLE TYPE","1948","Giddings and
Lewis","330",,"Good","Yes",,"1948 Giddings and Lewis 330
","B5500",$15000.00,"-1","Yes","3""","5","500","10","62"" x
30""","Spindle","Taper","RPM","HP","Table"

7600,"BORING MILLS, HORIZ, TABLE TYPE","1962","Giddings and
Lewis","340-T",,"Good","Yes",,"1962 Giddings and Lewis 340-T
","B5500",$59500.00,"0","No","4""","5 MT","600","25","48"" x
98""","Spindle","Taper","RPM","HP","Table"

8235,"BORING MILLS, HORIZ, TABLE TYPE","1994","Giddings and
Lewis","70A-DP5-T",,"Very Good",,,"1994 Giddings and Lewis 70A-DP5-T
","B5500",$139500.00,"0",,"5""","50","975","25","60"" x
144""","Spindle","Taper","RPM","HP","Table"

9443,"BORING MILLS, HORIZ, TABLE TYPE","1967","Lucas","542B-120",,"Very
Good","Yes",,"1967 Lucas 542B-120
","B5500",$114500.00,"0","Yes","5""","50","1,200","25","48"" x
122""","Spindle","Taper","RPM","HP","Table"

9922,"BORING MILLS, HORIZ, TABLE TYPE","19??","Lucas","441B72",,"Very
Good","Yes",,"19?? Lucas 441B72
","B5500",,"-1","Yes","4""","50","1,550","15","74"" x
42""","Spindle","Taper","RPM","HP","Table"

10496,"BORING MILLS, HORIZ, TABLE TYPE",,"Lucas","Model 30DC",,"Very
Good","Yes",," Lucas Model 30DC
","B5500",$89500.00,"0","Yes","5""","50","1,200","30","60"" x
122""","Spindle","Taper","RPM","HP","Table"

9656,"BORING MILLS, HORIZ, TABLE
TYPE","1969","Lucas","441B72",,"Good","Yes",,"1969 Lucas 441B72
","B5500",$39500.00,"0","Yes","4""","50","1,550","15","74"" x
42""","Spindle","Taper","RPM","HP","Table"

9658,"BORING MILLS, HORIZ, TABLE
TYPE","1978","Nomura","B-100LP",,"Good","Yes","2804 1981 - Nomura -
B-100LP - ","1978 Nomura B-100LP
","B5500",$29500.00,"0","Yes","3.94""","50","1,200","15","55"" x
40""","Spindle","Taper","RPM","HP","Table"

8933,"BORING MILLS, HORIZ, TABLE TYPE","1967","PBR","AF-90",,"Very
Good","Yes","3 1/2"" Spindle, BT 45 Taper, 1,500 RPM, 15 HP, 58"" x 48""
x 22"" x 60"" Travels, 47"" x 37"" Rotary Table, Tailstock, 11"" Spindle
Support, Accurite III 2-Axis DRO, Coolant System, Pendant Control, Quick
Change Spindle, Outer Bearing Column, Power Draw Bar, Facing Head
Available","1967 PBR AF-90 ","B5500",,"-1","Yes","3
1/2""","45","1,500","15","47"" x
37""","Spindle","Taper","RPM","HP","Table"

10395,"BORING MILLS, HORIZ, TABLE
TYPE","19??","Scharmann","FB-100",,"Very Good","Yes",,"19?? Scharmann
FB-100 ","B5500",,"-1","Yes","4 3/4""","50","900","20","79"" x
60""","Spindle","Taper","RPM","HP","Table"

9477,"BORING MILLS, HORIZ, TABLE
TYPE",,"Scharmann","FB-132",,"Good","Yes",," Scharmann FB-132
","B5500",$39500.00,"0","Yes","4 3/4""","50","900","20","79"" x
60""","Spindle","Taper","RPM","HP","Table"

9440,"BORING MILLS, HORIZ, TABLE
TYPE","1972","Scharmann","FB-100",,"Good","Yes",,"1972 Scharmann FB-100
","B5500",$34500.00,"0","Yes","4 3/4""","50","1,000","20","51 1/2"" x 37
1/2""","Spindle","Taper","RPM","HP","Table"

8236,"BORING MILLS, HORIZ, TABLE
TYPE","1963","Skoda","W-160A",,"Good","Yes",,"1963 Skoda W-160A
","B5500",$149500.00,"0","Yes","6.29""","100
Metric","800","47.5","108.26"" x
78.74""","Spindle","Taper","RPM","HP","Table"

10535,"BORING MILLS, HORIZ, TABLE TYPE","1996","Summit","4 1/8""",,"Very
Good","Yes",,"1996 Summit 4 1/8"" ","B5500",$89500.00,"0","Yes","4
1/8""","50","1,400","18","60"" x
48""","Spindle","Taper","RPM","HP","Table"

10518,"BORING MILLS, HORIZ, TABLE
TYPE","1994","Summit","HTM-4",,,"Yes",,"1994 Summit HTM-4
","B5500",,"0","Yes","4 1/8""","50","1,600","18","63"" x
55""","Spindle","Taper","RPM","HP","Table"

8576,"BORING MILLS, HORIZ, TABLE
TYPE","1977","Tos","W-100A",,"Good","Yes",,"1977 Tos W-100A
","B5500",$35000.00,"0","Yes","3.94""","50","1,120","20","55"" x
55""","Spindle","Taper","RPM","HP","Table"

9889,"BORING MILLS, HORIZ, TABLE
TYPE","1981","Tos","WHN-138A",,"Good","Yes",,"1981 Tos WHN-138A
","B5500",$79500.00,"0","Yes","5.12""","50","710","40","78"" x
71""","Spindle","Taper","RPM","HP","Table"

9882,"BORING MILLS, HORIZ, TABLE TYPE","1981","Tos","WHN-138A",,"Very
Good","Yes",,"1981 Tos WHN-138A
","B5500",$132500.00,"0","Yes","5.12""","50","800","50","70.86"" x
62.99""","Spindle","Taper","RPM","HP","Table"

9688,"BORING MILLS, HORIZ, TABLE TYPE","1980","Toshiba
(Shibaura)","BT-10BR3",,"Very Good","Yes",,"1980 Toshiba (Shibaura)
BT-10BR3 ","B5500",$63900.00,"0","Yes","3.94""","50","1,000","15","63""
x 55""","Spindle","Taper","RPM","HP","Table"

9657,"BORING MILLS, HORIZ, TABLE TYPE","1981","Toshiba
(Shibaura)","BT-10B",,"Good","Yes",,"1981 Toshiba (Shibaura) BT-10B
","B5500",$39500.00,"0","Yes","3.94""","50","1,000","15","49.2"" x
44.1""","Spindle","Taper","RPM","HP","Table"

9661,"BORING MILLS, HORIZ, TABLE
TYPE","1978","Union","BFT-110",,"Good","Yes","Spindle 4.33"", 50 Taper,
63"" X 52"" Indexing Table, 5.6 - 1,120 RPM, 20 HP, Power Draw Bar,
Pendant Control, 3-Axis DRO's, Hardend & Ground Ways, Power Draw Bar,
Way Covers, Tailstock","1978 Union BFT-110
","B5500",$42500.00,"0","Yes","4.33""","50","1,120","20","60"" x
52""","Spindle","Taper","RPM","HP","Table"

9693,"BORING MILLS, HORIZ, TABLE
TYPE","1978","Union","BFT-110/II",,"Good","Yes",,"1978 Union BFT-110/II
","B5500",$29500.00,"0","Yes","4.33""","50","1,120","20","60"" x
52""","Spindle","Taper","RPM","HP","Table"

9399,"BORING MILLS, HORIZ, TABLE
TYPE","1974","Wotan","B-130-R",,"Good","Yes",,"1974 Wotan B-130-R
","B5500",$79500.00,"0","Yes","5.11""","50","1,000","25","82"" x
72""","Spindle","Taper","RPM","HP","Table"

9400,"BORING MILLS, HORIZ, TABLE
TYPE","1973","Wotan","B-105-M",,"Good","Yes",,"1973 Wotan B-105-M
","B5500",$45900.00,"0","Yes","5.11""","50","1,600","25","55"" x
44""","Spindle","Taper","RPM","HP","Table"

9690,"BORING MILLS, HORIZ, TABLE TYPE","1972","Wotan","B-100-M",,"Very
Good","Yes",,"1972 Wotan B-100-M
","B5500",$54500.00,"0","Yes","4""","50","1,000","20","44"" x
55""","Spindle","Taper","RPM","HP","Table"

8547,"BORING MILLS, HORIZ, TABLE
TYPE","1975","Wotan","B-130-S",,"Good","Yes",,"1975 Wotan B-130-S
","B5500",$58000.00,"0","Yes","5.11""","50","1,000","15","66.9"" x
59.8""","Spindle","Taper","RPM","HP","Table"

8427,"BORING MILLS, HORIZ, TABLE
TYPE","1965","Wotan","B-130",,"Good","Yes",,"1965 Wotan B-130
","B5500",$39500.00,"0","Yes","5.11","50","1,000","15","66.9"" x
59.8""","Spindle","Taper","RPM","HP","Table"

10521,"BORING MILLS, HORIZ, TABLE
TYPE","1984","Wotan","B-150-S",,"Good","Yes",,"1984 Wotan B-150-S
","B5500",$94000.00,"0","Yes","5.9""","50","1,000","15","79"" x
71""","Spindle","Taper","RPM","HP","Table"

10520,"BORING MILLS, HORIZ, TABLE
TYPE","1984","Wotan","B-130-S",,"Good","Yes",,"1984 Wotan B-130-S
","B5500",$72000.00,"0","Yes","5.11""","50","1,000","15","66.9"" x
59.8""","Spindle","Taper","RPM","HP","Table"

10140,"BORING MILLS, HORIZ, TABLE TYPE CNC and
NC","1961/1984","DeVlieg","JMC-4360","Centroid M 400","Good","Yes","4""
Spindle, 30 HP, 3,000 RPM, 50 Taper, 60"" x 48"" x 16"" x 14"" Travels,
48"" x 60"" Table, Centroid M 400, Remote Jog Handle, Steel Way Covers,
Coolant Chiller, Probe System, Tapered and Straight Thread Milling,
Coordinate System Rotation","1961/1984 DeVlieg JMC-4360 Centroid M
400","B5751",$24500.00,"-1","Yes","4""","50","3,000","30","48"" x
60""","Spindle","Taper","RPM","HP","Table"

9928,"BORING MILLS, HORIZ, TABLE TYPE CNC and NC","2009","Fermat
(TOS)","WHN-13.8","Heidenhain i530","New","No",,"2009 Fermat (TOS)
WHN-13.8 Heidenhain
i530","B5751",$522000.00,"0","Yes","5.11""","50","1,800","49","87"" x
71""","Spindle","Taper","RPM","HP","Table"

7473,"BORING MILLS, HORIZ, TABLE TYPE CNC and NC","1980","Giddings and
Lewis","PC50-TX","G&L 800","Good","Yes",,"1980 Giddings and Lewis
PC50-TX G&L
800","B5751",$139900.00,"0","Yes","5""","50","1,120","30","96"" x
48""","Spindle","Taper","RPM","HP","Table"

8232,"BORING MILLS, HORIZ, TABLE TYPE CNC and NC","1970/96","Giddings
and Lewis","70-H5-T","Heidenhain TNC-406","Good","Yes",,"1970/96
Giddings and Lewis 70-H5-T Heidenhain
TNC-406","B5751",$189500.00,"0","Yes","5""","50","1,000","40","72"" x
144""","Spindle","Taper","RPM","HP","Table"

8338,"BORING MILLS, HORIZ, TABLE TYPE CNC and NC","1954/89","Giddings
and Lewis","350-T","Allen Bradley 8400","Good","Yes",,"1954/89 Giddings
and Lewis 350-T Allen Bradley 8400","B5751",$46000.00,"0","Yes","5""","6
MT","975","15","60"" x 120""","Spindle","Taper","RPM","HP","Table"

10396,"BORING MILLS, HORIZ, TABLE TYPE CNC and
NC","1994","Kuraki","KBM-11A","Fanuc 16M","Excellent","Yes",,"1994
Kuraki KBM-11A Fanuc
16M","B5751",$179500.00,"-1","Yes","4.33""","50","1,500","25","41""x
37""","Spindle","Taper","RPM","HP","Table"

8652,"BORING MILLS, HORIZ, TABLE TYPE CNC and
NC","1983","Kuraki","KBT-1105","Fanuc 6M","Good","Yes",,"1983 Kuraki
KBT-1105 Fanuc
6M","B5751",$120000.00,"0","Yes","4.33""","50","1,200","20","55.18"" x
62.99""","Spindle","Taper","RPM","HP","Table"

7622,"BORING MILLS, HORIZ, TABLE TYPE CNC and
NC","1994","Kuraki","KBT-11","Fanuc 16M","Very Good","Yes",,"1994 Kuraki
KBT-11 Fanuc
16M","B5751",$199500.00,"0","Yes","4.33""","50","1,500","25","37"" x
41""","Spindle","Taper","RPM","HP","Table"

7482,"BORING MILLS, HORIZ, TABLE TYPE CNC and NC","1987","Lucas","30D
CS","GE Mark Centruy 2000","Needs Retrofitting","Yes",,"1987 Lucas 30D
CS GE Mark Centruy
2000","B5751",$60000.00,"0","Yes","5""","50","1,200","30","60"" x
100""","Spindle","Taper","RPM","HP","Table"

10519,"BORING MILLS, HORIZ, TABLE TYPE CNC and
NC","1999","Stanko","2B622","Fanuc 16MB","Very Good","Yes",,"1999 Stanko
2B622 Fanuc
16MB","B5751",$129500.00,"0","Yes","5""","50","2,500","50","62.9"" x
49.21","Spindle","Taper","RPM","HP","Table"

8248,"BORING MILLS, HORIZ, TABLE TYPE CNC and
NC","1999","Toshiba","BP-110-P20","Tosnuc 888","Very Good","Yes",,"1999
Toshiba BP-110-P20 Tosnuc
888","B5751",$269500.00,"0","Yes","4.33""","50","3,000","30","55"" x
80""","Spindle","Taper","RPM","HP","Table"

8320,"BORING MILLS, HORIZ, TABLE TYPE CNC and
NC","1982/05","Toshiba","BP-13P5","Fanuc 16MB","Very
Good","Yes",,"1982/05 Toshiba BP-13P5 Fanuc
16MB","B5751",$165000.00,"0","Yes","5.19""","7 MT","1,000","30","59"" x
118""","Spindle","Taper","RPM","HP","Table"

9398,"BORING MILLS, HORIZ, TABLE TYPE CNC and
NC","1989","Union","BFT-105","Heidenhain TNC-355","Good","Yes",,"1989
Union BFT-105 Heidenhain
TNC-355","B5751",$129500.00,"0","Yes","4""","50","2,500","34","54"" x
48""","Spindle","Taper","RPM","HP","Table"

10561,"BORING MILLS, HORIZ, TABLE TYPE CNC and
NC","1995","Union","BFT-13/6","Fanuc 16iM","Very Good","Yes",,"1995
Union BFT-13/6 Fanuc
16iM","B5751",$89500.00,"0","Yes","5""","50","930","50","55.11"" x
62.99""","Spindle","Taper","RPM","HP","Table"

9919,"BORING MILLS, HORIZ, TABLE TYPE CNC
W-ATC","19??","Burgmaster","HTC-330 L","GE 550","Good","Yes",,"19??
Burgmaster HTC-330 L GE
550","B5751A",,"-1","Yes","5""","50","1,200","20","36"" x
60""","Spindle","Taper","RPM","HP","Table"

9921,"BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC","19??","Cincinnati","10
HC-1500","Acramatic 2.1 Big Blue","Good",,,"19?? Cincinnati 10 HC-1500
Acramatic 2.1 Big
Blue","B5751A",,"-1","Yes","5.11""","50","4,000","60","31.25"" x
64""","Spindle","Taper","RPM","HP","Table"

9920,"BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC","19??","Cincinnati","10
HC-1500","Acramatic 2.1 Big Blue","Good","Yes",,"19?? Cincinnati 10
HC-1500 Acramatic 2.1 Big
Blue","B5751A",,"-1","Yes","5.11""","50","4,000","60","31.25"" x
64""","Spindle","Taper","RPM","HP","Table"

10437,"BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC","1999","Daewoo","Ace
B-130","Fanuc 16M","Very Good","Yes",,"1999 Daewoo Ace B-130 Fanuc
16M","B5751A",$285000.00,"0","Yes","5""","50","2,000","30","71"" x
63""","Spindle","Taper","RPM","HP","Table"

9642,"BORING MILLS, HORIZ, TABLE TYPE CNC
W-ATC","1997","Defum","DBM-100N","Fanuc OMC","Good","Yes",,"1997 Defum
DBM-100N Fanuc
OMC","B5751A",$99500.00,"0","Yes","4""","50","2,000","40","55"" x
43""","Spindle","Taper","RPM","HP","Table"

10359,"BORING MILLS, HORIZ, TABLE TYPE CNC
W-ATC","2005","Doosan","DB-130C","Fanuc 18iMB","Very Good","Yes",,"2005
Doosan DB-130C Fanuc
18iMB","B5751A",$412000.00,"0","Yes","5.13""","50","2,500","35","62.99""
x 70.86""","Spindle","Taper","RPM","HP","Table"

10258,"BORING MILLS, HORIZ, TABLE TYPE CNC
W-ATC","2008","Femco","BMC-110 R2","Fanuc
21iMB","Excellent","Yes",,"2008 Femco BMC-110 R2 Fanuc
21iMB","B5751A",$320000.00,"0","Yes","4.33""","50","2,500","35","62.99""
x 56.69""","Spindle","Taper","RPM","HP","Table"

10067,"BORING MILLS, HORIZ, TABLE TYPE CNC
W-ATC","2009","Femco","BMC-110 R2","Fanuc 21i","Like New","Yes",,"2009
Femco BMC-110 R2 Fanuc
21i","B5751A",$299000.00,"0","Yes","4.33""","50","2,500","35","62.99"" x
56.69""","Spindle","Taper","RPM","HP","Table"

10361,"BORING MILLS, HORIZ, TABLE TYPE CNC
W-ATC","1996","Kuraki","KBT-13DXA","Fanuc 15M","Very Good","Yes",,"1996
Kuraki KBT-13DXA Fanuc
15M","B5751A",$525000.00,"0","Yes","5.125""","50","2,500","35","62.99""
x 70.87""","Spindle","Taper","RPM","HP","Table"

10372,"BORING MILLS, HORIZ, TABLE TYPE CNC
W-ATC","1994","Kuraki","KBM-11A","Fanuc 16M","Very Good","Yes",,"1994
Kuraki KBM-11A Fanuc
16M","B5751A",$175000.00,"0","Yes","4.33""","50","1,500","25","41.25"" x
37.25""","Spindle","Taper","RPM","HP","Table"

10081,"BORING MILLS, HORIZ, TABLE TYPE CNC
W-ATC","1988","Kuraki","KH-63","Fanuc 11M","Good","Yes",,"1988 Kuraki
KH-63 Fanuc
11M","B5751A",$35000.00,"0","Yes","3.94""","50","1,200","15","24"" x
24""","Spindle","Taper","RPM","HP","Table"

6957,"BORING MILLS, HORIZ, TABLE TYPE CNC
W-ATC","1997","Mitsubishi","MHT 11/1416","Mitsubishi 520M","Very
Good","Yes",,"1997 Mitsubishi MHT 11/1416 Mitsubishi
520M","B5751A",$325000.00,"0","Yes","4.33""","50","2,500","30","63"" x
51""","Spindle","Taper","RPM","HP","Table"

10069,"BORING MILLS, HORIZ, TABLE TYPE CNC
W-ATC","2009","Poreba","HBM-4","Fanuc 18iMB","New","Yes",,"2009 Poreba
HBM-4 Fanuc
18iMB","B5751A",$264500.00,"0","Yes","4.33""","50","3,500","25","60"" x
48""","Spindle","Taper","RPM","HP","Table"

10563,"BORING MILLS, HORIZ, TABLE TYPE CNC
W-ATC","2000","Toshiba","BTD-13.R22","Tosnuc 888","Very
Good","Yes",,"2000 Toshiba BTD-13.R22 Tosnuc
888","B5751A",$469500.00,"0","Yes","5.12","50","2,500","40","70.8"" x
86.66""","Spindle","Taper","RPM","HP","Table"

8662,"BORING MILLS, HORIZ, TABLE TYPE CNC
W-ATC","2000","Toshiba","BP-130-P40","Tosnuc 888","Very
Good","Yes",,"2000 Toshiba BP-130-P40 Tosnuc
888","B5751A",$459900.00,"0","Yes","5.12""","50","2,500","40","70"" x
155""","Spindle","Taper","RPM","HP","Table"

10586,"BORING MILLS, HORIZ, TABLE TYPE CNC
W-ATC","2002","Union","KC-130","Heidenhain TNC-426","Very
Good","Yes",,"2002 Union KC-130 Heidenhain
TNC-426","B5751A",$715000.00,"0","Yes","5.11","50","6,000","60","100"" x
80""","Spindle","Taper","RPM","HP","Table"

7569,"BORING MILLS, VERTICAL and
VTL","1956","Bertram","60""",,"Good","Yes",,"1956 Bertram 60""
","B6006",$59500.00,"0","Yes","60""","64""","48""","75","30","Table","Swing","U/R","RPM","HP"

10625,"BORING MILLS, VERTICAL and
VTL","1950's","Betts","144""",,"Good","Yes",,"1950's Betts 144""
","B6006",$155900.00,"0","Yes","144""","150.78""","108""","20","75","Table","Swing","U/R","RPM","HP"

8063,"BORING MILLS, VERTICAL and VTL",,"Betts","112""",,"Good","Yes",,"
Betts 112""
","B6006",$119500.00,"0","Yes","112""","116""","54""","100","50","Table","Swing","U/R","RPM","HP"

8392,"BORING MILLS, VERTICAL and VTL","1976","Bullard","86""
Dynatrol",,"Very Good","Yes",,"1976 Bullard 86"" Dynatrol
","B6006",$499500.00,"0","Yes","86""","98""","132""","120","75","Table","Swing","U/R","RPM","HP"

8413,"BORING MILLS, VERTICAL and VTL",,"Bullard","36"" Spiral
Drive",,"Godd","Yes",," Bullard 36"" Spiral Drive
","B6006",,"-1","Yes","36""","39""","24""","140","25","Table","Swing","U/R","RPM","HP"

8420,"BORING MILLS, VERTICAL and VTL",,"Bullard","36"" Spiral
Drive",,"Good","Yes",," Bullard 36"" Spiral Drive
","B6006",$12500.00,"0","Yes","36""","39""","24""","140","25","Table","Swing","U/R","RPM","HP"

8479,"BORING MILLS, VERTICAL and VTL","1942","Bullard","36"" Spiral
Drive",,"Very Good","Yes",,"1942 Bullard 36"" Spiral Drive
","B6006",$15500.00,"0","Yes","36""","39""","24""","200","25","Table","Swing","U/R","RPM","HP"

8564,"BORING MILLS, VERTICAL and VTL",,"Bullard","42"" Spiral
Drive",,"Good","Yes",," Bullard 42"" Spiral Drive
","B6006",$26500.00,"0","Yes","42""","54""","57""","100","25","Table","Swing","U/R","RPM","HP"

8687,"BORING MILLS, VERTICAL and VTL","1952","Bullard","54""
Cutmaster",,"Good","Yes",,"1952 Bullard 54"" Cutmaster
","B6006",$49500.00,"0","Yes","54""","62""","44""","120","30","Table","Swing","U/R","RPM","HP"

9761,"BORING MILLS, VERTICAL and VTL",,"Bullard","42"" Spiral
Drive",,"Good","Yes",," Bullard 42"" Spiral Drive
","B6006",$18500.00,"0","Yes","42""","54""","57""","100","25","Table","Swing","U/R","RPM","HP"

9156,"BORING MILLS, VERTICAL and VTL","1952","Bullard","36""
Man-Au-Trol",,"Fair","No",,"1952 Bullard 36"" Man-Au-Trol
","B6006",$15000.00,"0","Yes","36""","46""","50""","300","30","Table","Swing","U/R","RPM","HP"

10191,"BORING MILLS, VERTICAL and VTL","1954","Bullard","42""
Cutmaster",,"Very Good","Yes",,"1954 Bullard 42"" Cutmaster
","B6006",$26500.00,"0","Yes","42""","48""","37""","200","20","Table","Swing","U/R","RPM","HP"

9726,"BORING MILLS, VERTICAL and VTL","1954","Bullard","36""
Cutmaster",,"Good","Yes",,"1954 Bullard 36"" Cutmaster
","B6006",$42500.00,"0","Yes","36""","45""","30""","180","25","Table","Swing","U/R","RPM","HP"

10235,"BORING MILLS, VERTICAL and VTL","1962","Bullard","56""
Dynatrol",,"Good","Yes",,"1962 Bullard 56"" Dynatrol
","B6006",$59500.00,"0","Yes","56""","62""","40""","200","50","Table","Swing","U/R","RPM","HP"

8124,"BORING MILLS, VERTICAL and VTL","1958","Bullard","36""
Cutmaster",,"Very Good","Yes",,"1958 Bullard 36"" Cutmaster
","B6006",$42000.00,"0","Yes","36""","45""","30""","180","30","Table","Swing","U/R","RPM","HP"

9773,"BORING MILLS, VERTICAL and VTL","1952","Bullard","42""
Cutmaster",,"Good","Yes",,"1952 Bullard 42"" Cutmaster
","B6006",$34500.00,"0","Yes","42""","54""","37""","150","30","Table","Swing","U/R","RPM","HP"

10190,"BORING MILLS, VERTICAL and VTL","1966","Bullard","46""
Dynatrol",,"Good","Yes",,"1966 Bullard 46"" Dynatrol
","B6006",$49500.00,"0","Yes","46""","58""","54""","250","50","Table","Swing","U/R","RPM","HP"

10195,"BORING MILLS, VERTICAL and VTL","1953","Bullard","42""
Cutmaster",,"Good","Yes",,"1953 Bullard 42"" Cutmaster
","B6006",$79500.00,"0","Yes","42""","54""","37""","200","30","Table","Swing","U/R","RPM","HP"

10222,"BORING MILLS, VERTICAL and VTL","1953","Bullard","42""
Cutmaster",,"Good","Yes",,"1953 Bullard 42"" Cutmaster
","B6006",$32500.00,"0","Yes","42""","54""","37""","200","50","Table","Swing","U/R","RPM","HP"

9723,"BORING MILLS, VERTICAL and VTL","1943","Bullard","36""
Cutmaster",,"Good","Yes",,"1943 Bullard 36"" Cutmaster
","B6006",$29900.00,"0","Yes","36""","45""","30""","180","30","Table","Swing","U/R","RPM","HP"

8067,"BORING MILLS, VERTICAL and VTL","1946","Bullard","42"" Spiral
Drive",,"Good","Yes","42"" 4-Jaw Chuck, 45"" Swing - Side Up, 54"" Swing
Side Down, 37"" Under Rail, 120 RPM, 30 HP, One (1) Five Sided Turret
Head, One (1) Side Head","1946 Bullard 42"" Spiral Drive
","B6006",$17500.00,"0","Yes","42""","54""","33""","120","30","Table","Swing","U/R","RPM","HP"

6223,"BORING MILLS, VERTICAL and VTL","1954","Bullard","42""
Cutmaster",,"Good","No",,"1954 Bullard 42"" Cutmaster
","B6006",$59500.00,"-1","Yes","42""","54""","37""","150","30","Table","Swing","U/R","RPM","HP"

5869,"BORING MILLS, VERTICAL and VTL","1973","Bullard","46""
Dynatrol",,"Very Good","Yes",,"1973 Bullard 46"" Dynatrol
","B6006",$105900.00,"0","Yes","46""","58""","64""","333","50","Table","Swing","U/R","RPM","HP"

6549,"BORING MILLS, VERTICAL and VTL","1967","Bullard","36""
Dynatrol",,"Very Good","Yes",,"1967 Bullard 36"" Dynatrol
","B6006",$59500.00,"0","Yes","36""","48""","54""","585","50","Table","Swing","U/R","RPM","HP"

5860,"BORING MILLS, VERTICAL and VTL","1967","Bullard","52""
Dynatrol",,"Good","Yes",,"1967 Bullard 52"" Dynatrol
","B6006",$59500.00,"0","Yes","52""","58""","50
3/8""","250","50","Table","Swing","U/R","RPM","HP"

7889,"BORING MILLS, VERTICAL and VTL","1964","Bullard","36""
Dynatrol",,"Good","Yes","36"" 3-Jaw Chuck, 48"" Swing, 30"" Under Rail,
3008 RPM, 50 HP, 4-Pos. Turret Head, Power Rapid Traverse All
Directions, Full Pendant Control, Hardened and Ground Ways","1964
Bullard 36"" Dynatrol
","B6006",$19000.00,"-1","Yes","36""","48""","30""","300","50","Table","Swing","U/R","RPM","HP"

8064,"BORING MILLS, VERTICAL and VTL","1942","Bullard","36"" Spiral
Drive",,"Good","Yes",,"1942 Bullard 36"" Spiral Drive
","B6006",$14500.00,"0","Yes","34""","39""","24""","200","30","Table","Swing","U/R","RPM","HP"

8066,"BORING MILLS, VERTICAL and VTL",,"Bullard","36"" Spiral
Drive",,"Good","Yes",," Bullard 36"" Spiral Drive
","B6006",$10500.00,"0","Yes","34""","39""","24""","200","30","Table","Swing","U/R","RPM","HP"

8103,"BORING MILLS, VERTICAL and VTL","1962","Bullard","64""
Cutmaster",,"Good","Yes",,"1962 Bullard 64"" Cutmaster
","B6006",$95000.00,"0","Yes","64""","72""","54""","100","50","Table","Swing","U/R","RPM","HP"

9574,"BORING MILLS, VERTICAL and VTL",,"Cincinnati","84""
Hypro",,"Good",,"84"" 4-Jaw Chuck, 89"" Swing, 70"" Under Rail, 70 RPM,
30 HP, Two (2) Swivel Type Ram Heads, Pendant Controls, Table Guarding,
Power Rail Elevation, Anti-Friction Table Track, Coolant System, Floor
Standing - No Pit Required"," Cincinnati 84"" Hypro
","B6006",$79500.00,"0","Yes","84""","89""","70""","70","30","Table","Swing","U/R","RPM","HP"

8388,"BORING MILLS, VERTICAL and VTL",,"Cincinnati","92""
Hypro",,"Good","No","92"" 4-Jaw Chuck, 102"" Swing, 64"" Under Rail, 43
RPM, 40 HP, Two (2) Ram Head(s), One (1) Side Head, Pendant Controls, No
Pit Required"," Cincinnati 92"" Hypro
","B6006",$79500.00,"0","Yes","92""","102""","64""","43","40","Table","Swing","U/R","RPM","HP"

8443,"BORING MILLS, VERTICAL and VTL","1977","Dorries","40""",,"Very
Good","Yes",,"1977 Dorries 40""
","B6006",$34500.00,"0","Yes","39.4""","51""","60""","355","30","Table","Swing","U/R","RPM","HP"

8200,"BORING MILLS, VERTICAL and VTL","1970","Froriep","6KE
260/610-120",,"Very Good","No",,"1970 Froriep 6KE 260/610-120
","B6006",$299500.00,"0","Yes","102""","240""","53","38","75","Table","Swing","U/R","RPM","HP"

9826,"BORING MILLS, VERTICAL and VTL","1947","Giddings and Lewis","52""
Hypro",,"Good","Yes",,"1947 Giddings and Lewis 52"" Hypro
","B6006",$52500.00,"0","Yes","52""","57""","46""","72","40","Table","Swing","U/R","RPM","HP"

8114,"BORING MILLS, VERTICAL and VTL","1954","Giddings and Lewis","Model
61",,"Very Good","Yes",,"1954 Giddings and Lewis Model 61
","B6006",$125000.00,"0","Yes","52""","54""","52""","300","30","Table","Swing","U/R","RPM","HP"

9514,"BORING MILLS, VERTICAL and VTL","1955","Giddings and Lewis","72""
Hypro",,"Good","No",,"1955 Giddings and Lewis 72"" Hypro
","B6006",$229500.00,"0","Yes","72""","75","120","100","40","Table","Swing","U/R","RPM","HP"

8198,"BORING MILLS, VERTICAL and
VTL","1955","King","42""",,"Good","Yes",,"1955 King 42""
","B6006",$40000.00,"0","Yes","42""","54""","37""","200","30","Table","Swing","U/R","RPM","HP"

8575,"BORING MILLS, VERTICAL and VTL",,"King","64""",,"Good","Yes",,"
King 64""
","B6006",$45000.00,"0","Yes","64""","72""","57""","45.","50","Table","Swing","U/R","RPM","HP"

8418,"BORING MILLS, VERTICAL and VTL",,"King","84""",,"Good","Yes",,"
King 84""
","B6006",$65000.00,"0","Yes","84""","90""","70""","30","4","Table","Swing","U/R","RPM","HP"

8106,"BORING MILLS, VERTICAL and VTL","1950","King","V-7 -
100""",,"Fair","Yes",,"1950 King V-7 - 100""
","B6006",$99900.00,"0","Yes","100""","103""","82""","45.1","40","Table","Swing","U/R","RPM","HP"

8285,"BORING MILLS, VERTICAL and
VTL","1948","King","62""",,"Good","Yes","62"" Table, 72"" Swing, 62""
Under Rail, 103 RPM, 50 HP, Two Ram Head(s), One Side Head, 66"" 4-Jaw
Manual Chuck, Pendant Control","1948 King 62""
","B6006",$45000.00,"-1","Yes","62""","72""","62""","103""","50","Table","Swing","U/R","RPM","HP"

10090,"BORING MILLS, VERTICAL and VTL",,"King","62""",,"Good","Yes",,"
King 62"" ","B6006",$38000.00,"0","Yes","62""","72""","53
1/2""","44","40","Table","Swing","U/R","RPM","HP"

8391,"BORING MILLS, VERTICAL and VTL",,"King","96""",,"Very Good",,,"
King 96""
","B6006",$169500.00,"0","No","96""","103.5""","70""","60","50","Table","Swing","U/R","RPM","HP"

8390,"BORING MILLS, VERTICAL and VTL",,"King","84""",,"Very
Good","No",," King 84""
","B6006",$99500.00,"0","Yes","84""","90""","70""","55","40","Table","Swing","U/R","RPM","HP"

8201,"BORING MILLS, VERTICAL and VTL",,"Niles","144""",,"Good","Yes",,"
Niles 144""
","B6006",$175000.00,"0","Yes","144""","157""","120","19","75","Table","Swing","U/R","RPM","HP"

8975,"BORING MILLS, VERTICAL and VTL","1971/1980","O-M
Ltd.","TMO-20",,"Good","Yes",,"1971/1980 O-M Ltd. TMO-20
","B6006",$89500.00,"0","Yes","78""","90""","63""","80","40","Table","Swing","U/R","RPM","HP"

9103,"BORING MILLS, VERTICAL and VTL","1968","Pensotti","KN-950",,"Very
Good","Yes","34"" 4-Jaw Chuck, 36"" Swing, 35.43"" Under Rail, 200 RPM,
25 HP, Turret Head, Side Head, Threading, Power Rapids, Floor
Mount","1968 Pensotti KN-950
","B6006",$22500.00,"-1","Yes","33.9""","36""","35.433""","200","25","Table","Swing","U/R","RPM","HP"

9032,"BORING MILLS, VERTICAL and VTL","1975","Rafamet","KCF-400",,"Very
Good","Yes",,"1975 Rafamet KCF-400
","B6006",$349500.00,"0","Yes","145""","162""","120""","40","75","Table","Swing","U/R","RPM","HP"

8277,"BORING MILLS, VERTICAL and
VTL","1976/95","Schiess","KE-100",,"Very Good","Yes",,"1976/95 Schiess
KE-100
","B6006",$29500.00,"0","Yes","39""","45""","52""","310","25","Table","Swing","U/R","RPM","HP"

7336,"BORING MILLS, VERTICAL and
VTL","1952","Schiess","KE-125",,"Good","Yes",,"1952 Schiess KE-125
","B6006",$49500.00,"0","Yes","49.2""","55.1""","52.6""","237","30","Table","Swing","U/R","RPM","HP"

8100,"BORING MILLS, VERTICAL and
VTL","2008","Vulcan","C5116A",,"Excellent","Yes",,"2008 Vulcan C5116A
","B6006",$69500.00,"0","Yes","55.12""","63""","39.37""","160","40","Table","Swing","U/R","RPM","HP"

10393,"BORING MILLS, VERTICAL and VTL","19??","Webster and
Bennett","36""",,"Very Good","Yes",,"19?? Webster and Bennett 36""
","B6006",,"-1","Yes","36""","42""","30""","200","15","Table","Swing","U/R","RPM","HP"

8490,"BORING MILLS, VERTICAL and VTL","1960","Webster and
Bennett","48""",,"Good","Yes",,"1960 Webster and Bennett 48""
","B6006",$18500.00,"0","Yes","48""","57""","32""","100","30","Table","Swing","U/R","RPM","HP"

10392,"BORING MILLS, VERTICAL and VTL","19??","Webster and
Bennett","36""",,"Very Good","Yes",,"19?? Webster and Bennett 36""
","B6006",,"-1","Yes","36""","42""","30""","200","15","Table","Swing","U/R","RPM","HP"

10391,"BORING MILLS, VERTICAL and VTL","19??","Webster and
Bennett","48""",,"Very Good","Yes",,"19?? Webster and Bennett 48""
","B6006",,"-1","Yes","48""","52""","44""","100","25","Table","Swing","U/R","RPM","HP"

9024,"BORING MILLS, VERTICAL and VTL",,"Webster and
Bennett","60""",,"Good","Yes",," Webster and Bennett 60""
","B6006",$76000.00,"0","Yes","60""","64""","35""","83","30""","Table","Swing","U/R","RPM","HP"

9861,"BORING MILLS, VERTICAL and VTL, CNC and
NC","2008","Amera-Seiki","VT-1000T","Fanuc OiTC","Like New","Yes",,"2008
Amera-Seiki VT-1000T Fanuc
OiTC","B6200",$299990.00,"-1","Yes","39.4""","47.42""","27.5","1,200","50","Table","Swing","U/R","RPM","HP"

10117,"BORING MILLS, VERTICAL and VTL, CNC and
NC","2010","Amera-Seiki","VT-800","Fanuc OiTD","New","Yes",,"2010
Amera-Seiki VT-800 Fanuc
OiTD","B6200",$259200.00,"-1","Yes","24""","31.5""","31.5","2,000","60","Table","Swing","U/R","RPM","HP"

9684,"BORING MILLS, VERTICAL and VTL, CNC and
NC","2008","Amera-Seiki","VT-600","Fanuc OiTC","Very Good","Yes",,"2008
Amera-Seiki VT-600 Fanuc
OiTC","B6200",$178900.00,"-1","Yes","24""","29.43""","23.62""","2,000","40","Table","Swing","U/R","RPM","HP"

10053,"BORING MILLS, VERTICAL and VTL, CNC and NC",,"Bullard","66""
Dynatrol","Fanuc OT","Good","Yes",," Bullard 66"" Dynatrol Fanuc
OT","B6200",$150000.00,"0","Yes","66""","79""","58""","160","100","Table","Swing","U/R","RPM","HP"

8262,"BORING MILLS, VERTICAL and VTL, CNC and NC","1986","Bullard","76""
Dynatrol","Allen Bradley 8200","Very Good","Yes",,"1986 Bullard 76""
Dynatrol Allen Bradley
8200","B6200",$249500.00,"0","Yes","76""","88""","76""","210","100","Table","Swing","U/R","RPM","HP"

10220,"BORING MILLS, VERTICAL and VTL, CNC and NC",,"Bullard","76""
Dyn-Au-Tape","Allen Bradley 8200","Good","Yes",," Bullard 76""
Dyn-Au-Tape Allen Bradley
8200","B6200",$165000.00,"0","Yes","76""","88""","78""","186","75","Table","Swing","U/R","RPM","HP"

9939,"BORING MILLS, VERTICAL and VTL, CNC and NC","1968","Bullard","36""
Dynatrol","Fanuc OT","Good","Yes","36"" 4-Jaw Manual Chuck, 39"" Maximum
Swing Side Head Up, 46"" Maximum Swing Side Head Down, 30"" Under Rail,
468 RPM, Turret Head, Side Head, Pendant Control, Power Indexing Turret
Head, Power Indexing Turret Side Head, Variable Rapid Traverse","1968
Bullard 36"" Dynatrol Fanuc
OT","B6200",$58000.00,"-1","Yes","36""","46""","30""","500","50","Table","Swing","U/R","RPM","HP"

8140,"BORING MILLS, VERTICAL and VTL, CNC and
NC","1968","Froriep","10KZ300","Allen Bradley 550","Good","Yes",,"1968
Froriep 10KZ300 Allen Bradley
550","B6200",$395000.00,"0","Yes","120""","132""","72""","56","70","Table","Swing","U/R","RPM","HP"

10056,"BORING MILLS, VERTICAL and VTL, CNC and NC",,"Giddings and
Lewis","Series 70","Machine Mate","Very Good","Yes",," Giddings and
Lewis Series 70 Machine
Mate","B6200",$84500.00,"0","Yes","48""","60""","48""","2,000","50","Table","Swing","U/R","RPM","HP"

10189,"BORING MILLS, VERTICAL and VTL, CNC and NC","1978","Giddings and
Lewis","48""","Giddings & Lewis 800","Good","Yes",,"1978 Giddings and
Lewis 48"" Giddings & Lewis
800","B6200",$129500.00,"0","Yes","48""","60""","48""","333","40","Table","Swing","U/R","RPM","HP"

8448,"BORING MILLS, VERTICAL and VTL, CNC and NC","1971/2008","Giddings
and Lewis","48""","Fagor 8055","Excellent","Yes","48"" Table, 60""
Swing, 60"" Under Rail, 320 RPM, 50 HP, Turret Head, 180 IPM Rapids,
Heidenhain Glass Scales on All Axis, Chip Enclosure Gaurds, New Bellows
Covers, Re-Conditioned Ballscrews, All Ways Re-Ground and Fitted,
Coolant System, Programmable Rail Head Elevation, Toolholders, CNC
Controlled Turret Head With Heidenhain Rotary Encoder Feedback,
Hydraulic Clamping on Rail Head","1971/2008 Giddings and Lewis 48""
Fagor
8055","B6200",$155000.00,"-1","Yes","48""","64""","60""","320","50","Table","Swing","U/R","RPM","HP"

9864,"BORING MILLS, VERTICAL and VTL, CNC and NC","1968/1990","Giddings
and Lewis","48""","Fanuc OT","Good","Yes",,"1968/1990 Giddings and Lewis
48"" Fanuc
OT","B6200",$56900.00,"0","Yes","48""","60""","48""","400","75","Table","Swing","U/R","RPM","HP"

8210,"BORING MILLS, VERTICAL and VTL, CNC and NC","1982","Giddings and
Lewis","Model 512","Giddings & Lewis 800","Good","Yes",,"1982 Giddings
and Lewis Model 512 Giddings & Lewis
800","B6200",$156900.00,"0","Yes","48""","60""","48""","400","75","Table","Swing","U/R","RPM","HP"

8571,"BORING MILLS, VERTICAL and VTL, CNC and NC",,"Giddings and
Lewis","VTL-60","GE Mark Centruy 2000","Good","Yes",," Giddings and
Lewis VTL-60 GE Mark Centruy
2000","B6200",$135000.00,"0","Yes","60""","72""","68""","272","125","Table","Swing","U/R","RPM","HP"

5997,"BORING MILLS, VERTICAL and VTL, CNC and NC","1986","Gray","48""
Ringmaster","Fanuc 15T","Very Good","No",,"1986 Gray 48"" Ringmaster
Fanuc
15T","B6200",$109500.00,"0","Yes","48""","61.75""","48""","290","50","Table","Swing","U/R","RPM","HP"

8222,"BORING MILLS, VERTICAL and VTL, CNC and NC","1980/08","Gray","RM
66","Fanuc OiT","Rebuilt","Yes","66"" Table, 72"" Swing, 66"" Under
Rail, 272 RPM, 50 HP, Single Turret Head, 66"" 4-Jaw Manual Chuck, Chip
Conveyor, Full Enclosure, Heidenhain Scales, New Control, AC Servos, 50
HP AC Spindle Motor","1980/08 Gray RM 66 Fanuc
OiT","B6200",$300000.00,"-1","Yes","66""","72""","66""","272","50","Table","Swing","U/R","RPM","HP"

9902,"BORING MILLS, VERTICAL and VTL, CNC and
NC","1953/1990","King","56""","Centroid T 400","Very Good","Yes","56""
Table, 64"" Swing, 42"" UR, 100 RPM, 50 HP, 56"" 4-Jaw Chuck, One
Overhead Loading Winch, Set of Four (4) Table Jaws, Roll Around Control,
Coolant System, Power Indexing Turret, Centroid T-400 Conversational
Control Same As GE Fanuc","1953/1990 King 56"" Centroid T
400","B6200",$70000.00,"0","Yes","56""","62""","42""","100","50","Table","Swing","U/R","RPM","HP"

8954,"BORING MILLS, VERTICAL and VTL, CNC and NC","2009","New
Century","VTC 64","Fanuc OiTC","Like New","Yes",,"2009 New Century VTC
64 Fanuc
OiTC","B6200",$368000.00,"0","Yes","64""","72""","52""","200","60","Table","Swing","U/R","RPM","HP"

10528,"BORING MILLS, VERTICAL and VTL, CNC and NC","1989","O-M
Ltd.","VT-5 20N","Fanuc 15TF","Good","Yes",,"1989 O-M Ltd. VT-5 20N
Fanuc
15TF","B6200",$249500.00,"0","Yes","78.74""","98.42""","80.75""","200","75","Table","Swing","U/R","RPM","HP"

10269,"BORING MILLS, VERTICAL and VTL, CNC and
NC","1981","Rafamet","KCH-250","GE 1050","Good","Yes",,"1981 Rafamet
KCH-250 GE
1050","B6200",$145000.00,"0","Yes","98.43""","116""","110""","140","25","Table","Swing","U/R","RPM","HP"

9862,"BORING MILLS, VERTICAL and VTL, CNC
W-ATC","2009","Amera-Seiki","VT-1000 ATC","Fanuc OiTC","Like
New","Yes",,"2009 Amera-Seiki VT-1000 ATC Fanuc
OiTC","B6200A",$385000.00,"-1","Yes","39.4""","47.42""","27.5","600","60","Table","Swing","U/R","RPM","HP"

9863,"BORING MILLS, VERTICAL and VTL, CNC
W-ATC","2010","Amera-Seiki","VT-1600 ATC","Fanuc
18iTB","New","No",,"2010 Amera-Seiki VT-1600 ATC Fanuc
18iTB","B6200A",$625000.00,"-1","Yes","63""","78.74""","78.74""","256""","100","Table","Swing","U/R","RPM","HP"

9810,"BORING MILLS, VERTICAL and VTL, CNC
W-ATC","2010","Amera-Seiki","VT-1200 ATC","Fanuc
OiTD","New","Yes",,"2010 Amera-Seiki VT-1200 ATC Fanuc
OiTD","B6200A",$522000.00,"-1","Yes","49.2""","63""","47.5""","312","60","Table","Swing","U/R","RPM","HP"

10080,"BORING MILLS, VERTICAL and VTL, CNC
W-ATC","1975","Berthiez","TFM-200N","Fanuc 21iT","Very
Good","Yes",,"1975 Berthiez TFM-200N Fanuc
21iT","B6200A",$325000.00,"0","Yes","81""","90""","69""","200","74","Table","Swing","U/R","RPM","HP"

9824,"BORING MILLS, VERTICAL and VTL, CNC
W-ATC","1996","Bullard","66""","Fanuc 15T","Good","Yes",,"1996 Bullard
66"" Fanuc
15T","B6200A",$155000.00,"0","Yes","66""","79""","76""","278","100","Table","Swing","U/R","RPM","HP"

10420,"BORING MILLS, VERTICAL and VTL, CNC
W-ATC","2002","Century","110""","Fanuc 18iTA","Very Good","Yes",,"2002
Century 110"" Fanuc
18iTA","B6200A",$415000.00,"0","Yes","110""","126""","65""","65","60","Table","Swing","U/R","RPM","HP"

10362,"BORING MILLS, VERTICAL and VTL, CNC
W-ATC","2003","Femco","VL-12","Fanuc 18T","Very Good","Yes",,"2003 Femco
VL-12 Fanuc
18T","B6200A",$185000.00,"0","Yes","49.21""","62.99""","49.61""","280","60","Table","Swing","U/R","RPM","HP"

10583,"BORING MILLS, VERTICAL and VTL, CNC W-ATC","1991","Giddings and
Lewis","Series 512","Giddings & Lewis 8000","Good","Yes",,"1991 Giddings
and Lewis Series 512 Giddings & Lewis
8000","B6200A",$325000.00,"0","Yes","48""","58""","42""","483","75","Table","Swing","U/R","RPM","HP"

10266,"BORING MILLS, VERTICAL and VTL, CNC W-ATC","1991","Giddings and
Lewis","42""","Giddings & Lewis 8000","Good","No",,"1991 Giddings and
Lewis 42"" Giddings & Lewis
8000","B6200A",$115000.00,"0","Yes","42""","48""","42""","480","60","Table","Swing","U/R","RPM","HP"

10055,"BORING MILLS, VERTICAL and VTL, CNC W-ATC","1978/2005","Giddings
and Lewis","Series 512","Fanuc 21iT","Good","Yes",,"1978/2005 Giddings
and Lewis Series 512 Fanuc
21iT","B6200A",$125000.00,"0","Yes","48""","60""","48""","327","50","Table","Swing","U/R","RPM","HP"

9821,"BORING MILLS, VERTICAL and VTL, CNC W-ATC","1985","Mazak","A-12
Megaturn","Mazatrol T-3","Good","Yes",,"1985 Mazak A-12 Megaturn
Mazatrol
T-3","B6200A",$158000.00,"0","Yes","49.2""","57""","51""","350","45","Table","Swing","U/R","RPM","HP"

8781,"BORING MILLS, VERTICAL and VTL, CNC W-ATC","1990","Mazak","A-12
Megaturn","Fanuc 15T","Good","Yes",,"1990 Mazak A-12 Megaturn Fanuc
15T","B6200A",$358900.00,"0","Yes","49.2""","57""","51""","350","80","Table","Swing","U/R","RPM","HP"

9054,"BORING MILLS, VERTICAL and VTL, CNC
W-ATC","1997","Monarch","VLN14","Fanuc 15TTA","Very Good","Yes",,"1997
Monarch VLN14 Fanuc
15TTA","B6200A",$329000.00,"0","Yes","60""","67""","44""","235","50","Table","Swing","U/R","RPM","HP"

10234,"BORING MILLS, VERTICAL and VTL, CNC W-ATC","1995","O-M
Ltd.","VT-5 16N","Fanuc 15T","Very Good","Yes",,"1995 O-M Ltd. VT-5 16N
Fanuc
15T","B6200A",$435000.00,"0","Yes","66""","78""","78.75""","250","60","Table","Swing","U/R","RPM","HP"

9421,"BORING MILLS, VERTICAL and VTL, CNC W-ATC","1985/1995","O-M
Ltd.","TDC-12N","Fanuc 15T","Very Good","Yes",,"1985/1995 O-M Ltd.
TDC-12N Fanuc 15T","B6200A",$295000.00,"0","Yes","49.25""","63""","49
1/4""","350","50","Table","Swing","U/R","RPM","HP"

8883,"BORING MILLS, VERTICAL and VTL, CNC W-ATC","1986","O-M
Ltd.","TDC-12N","Fanuc 11T","Very Good","Yes",,"1986 O-M Ltd. TDC-12N
Fanuc
11T","B6200A",$249000.00,"0","Yes","49.25""","63""","39.37""","350","50","Table","Swing","U/R","RPM","HP"

9298,"BORING MILLS, VERTICAL and VTL, CNC W-ATC","2002","O-M
Ltd.","Omega 80","Fanuc 18iT","Very Good","Yes",,"2002 O-M Ltd. Omega 80
Fanuc
18iT","B6200A",$295000.00,"0","Yes","63""","78.75""","63""","320","75","Table","Swing","U/R","RPM","HP"

10546,"BORING MILLS, VERTICAL and VTL, CNC
W-ATC","1981","Schiess","16DS-125","Fanuc 8T","Good","Yes",,"1981
Schiess 16DS-125 Fanuc
8T","B6200A",$99500.00,"0","Yes","49.21""","62.99""","49.21""","315","40","Table","Swing","U/R","RPM","HP"

8339,"BORING MILLS, VERTICAL and VTL, CNC
W-ATC","2008","Takang","VL-100CM","Fanuc 18iT","New","No",,"2008 Takang
VL-100CM Fanuc
18iT","B6200A",$422000.00,"0","Yes","39.3""","47.2""","36.4""","40","30","Table","Swing","U/R","RPM","HP"

10239,"BORING MILLS, VERTICAL and VTL, CNC
W-ATC","2008","Titan","57/65","Fanuc OiTC","Excellent","Yes",,"2008
Titan 57/65 Fanuc
OiTC","B6200A",$300000.00,"0","Yes","57.08""","65""","39.37""","250","60","Table","Swing","U/R","RPM","HP"

10046,"BORING MILLS, VERTICAL and VTL, CNC
W-ATC","2007","Topper","TVL-10DC",,"Very Good","Yes",,"2007 Topper
TVL-10DC
","B6200A",$220000.00,"0","Yes","40""","47.2","25.5""","350","30","Table","Swing","U/R","RPM","HP"

10423,"BORING MILLS, VERTICAL and VTL, CNC
W-ATC","2005","Toshiba","TUE-20","Fanuc 18iT","Good","Yes",,"2005
Toshiba TUE-20 Fanuc
18iT","B6200A",,"0","Yes","78.7""","90.5""","67.7""","200","60","Table","Swing","U/R","RPM","HP"

10580,"BORING MILLS, VERTICAL and VTL, CNC
W-ATC","1996","Toshiba","TUD-20","Fanuc 15TA","Very Good","Yes",,"1996
Toshiba TUD-20 Fanuc
15TA","B6200A",$510000.00,"0","Yes","78.74""","98.42""","81""","200","60","Table","Swing","U/R","RPM","HP"

9417,"BORING MILLS, VERTICAL and VTL, CNC
W-ATC","2001","Toshiba","TUE-15","Fanuc 18T","Very Good","Yes",,"2001
Toshiba TUE-15 Fanuc
18T","B6200A",$359000.00,"0","Yes","59""","70.86""","67.75""","250","50","Table","Swing","U/R","RPM","HP"

8342,"BORING MILLS, VERTICAL and VTL, CNC
W-ATC","2008","Toshiba","TUE-20","Fanuc OiTC","Like New","Yes",,"2008
Toshiba TUE-20 Fanuc
OiTC","B6200A",$565000.00,"0","Yes","78.7""","90.5""","67.7""","200","60","Table","Swing","U/R","RPM","HP"

8385,"BORING MILLS, VERTICAL and VTL, CNC
W-ATC","1982/2009","Toshiba","TMC-16A","Fanuc
18T","Rebuilt","Yes",,"1982/2009 Toshiba TMC-16A Fanuc
18T","B6200A",$430000.00,"0","Yes","71""","78.7""","63""","250","73""","Table","Swing","U/R","RPM","HP"

10422,"BORING MILLS, VERTICAL and VTL, CNC W-MILLING and
ATC","1996","Toshiba","TMD-16 2-APC","Fanuc 15TC","Good","Yes",,"1996
Toshiba TMD-16 2-APC Fanuc
15TC","B6175A",$384500.00,"0","Yes","63""","78.7""","61""","280","60","Table","Swing","U/R","RPM","HP"

7100,"BRAKES, PRESS,
HYDRAULIC","1985","Pacific","100-10",,"Good","Yes",,"1985 Pacific 100-10
","B7015",$24000.00,"-1","Yes","100","10'","7.5""","10""","15","Ton","Bed","Stoke","Throat","HP"

7099,"BRAKES, PRESS,
HYDRAULIC","1966","Pacific","200-10",,"Good","Yes","200 Tons, 10' Bed,
8' 4"" Between Housings, 7.5"" Stroke, 25 HP, Hurco AutoBend 5 Back
Gauge","1966 Pacific 200-10
","B7015",$29900.00,"-1","Yes","200","10'","7.5""","10""","25","Ton","Bed","Stoke","Throat","HP"

8384,"BRAKES, PRESS,
HYDRAULIC","1974","Promecam","RG-75-35",,"Good","Yes","80 Tons, 122'
Bed, 105"" Between housings, 4"" Stroke, 12"" Open Height, 136 IPM
Approach, 65 IPM Working, 127 IPM Return, 7.5 HP, Variable Stroke
Adjustment, Adjustable Punch Holders, Full Length Treadle","1974
Promecam RG-75-35
","B7015",$11500.00,"0","Yes","80","122'","4""","16""","7.5","Ton","Bed","Stoke","Throat","HP"

8454,"BRAKES, PRESS,
HYDRAULIC","1981","Promecam","RG-65-25",,"Good","Yes","120 Tons, 1/4""
Mild Steel Capacity, 8' Bed, 90"" Between housings, 8"" Stroke, 15""
Open Height, 136 IPM Approach, 65 IPM Working, 127 IPM Return, 25 HP,
Manual Back Operated Back Gauge, Upper & Lower Die Holders, Overload
Protection, Flush Mount Frame, Bed Tilt For Off-Set Bending, Off / Set/
Jog / Run / Single Modes, Large Selection of Tooling","1981 Promecam
RG-65-25
","B7015",$10500.00,"0","Yes","65","8'","8""","16""","10","Ton","Bed","Stoke","Throat","HP"

9134,"BRAKES, PRESS, HYDRAULIC","1996","Wysong","PH-6096","Wysong GC
6000","Very Good","Yes","60 Tons, 1/4"" Mild Steel Capacity, 8' Bed,
104"" Between housings, 6"" Stroke, 15"" Open Height, 300 IPM Approach,
22 IPM Working, 225 IPM Return, 15 HP, 24"" Two (2) Axis CNC Back Gauge,
Operator Control Pedestal, Flush Mount Frame","1996 Wysong PH-6096
Wysong GC
6000","B7015",$16500.00,"-1","Yes","60","96""","6""","10""","15","Ton","Bed","Stoke","Throat","HP"

8449,"BRAKES, PRESS, MECHANICAL","1978","Chicago","Model
68-B",,"Good","Yes",,"1978 Chicago Model 68-B
","B7020",$14000.00,"-1","Yes","55","8'","3""","8""","3","Ton","Bed","Stoke","Throat","HP"

8433,"BRAKES, PRESS, MECHANICAL","1956","Dreis and
Krump","5510D",,"Good","Yes",,"1956 Dreis and Krump 5510D
","B7020",$16500.00,"0","Yes","200","12'
6""","4""","8""","20","Ton","Bed","Stoke","Throat","HP"

8626,"BRAKES, PRESS, MECHANICAL",,"Milwaukee","3045-5",,"Good","Yes",,"
Milwaukee 3045-5
","B7020",$7500.00,"-1","Yes","40","6'","3""","8""",,"Ton","Bed","Stoke","Throat","HP"

8365,"BROACHES, HORIZONTAL SURFACE","1985","US
Broach","4T-36VHP",,,,,"1985 US Broach 4T-36VHP
","B7870",,"0",,"4",,"36""",,"30","Ton","Bed","Stoke","Throat","HP"

8900,"COMPARATORS",,"Jones and Lamson","FC-14",,"Very Good","Yes",,"
Jones and Lamson FC-14 ","C3806",$7500.00,"-1","Yes","Free
Standing","14""","8"" x 6""","30"" x
6""",".0005","Style","Screen","Range","Stage","Reolution"

9028,"COMPARATORS",,"Optical Gaging Products","Model Q30S",,"Very
Good","Yes",," Optical Gaging Products Model Q30S
","C3806",$14900.00,"0","Yes","Free Standing","30""","12"" x 10"" x
3""","32"" x 8""",".0005","Style","Screen","Range","Stage","Reolution"

9115,"COMPARATORS","1990","Optical Gaging
Products","QL-30",,"Refurbished","Yes",,"1990 Optical Gaging Products
QL-30 ","C3806",$19900.00,"0","Yes","Free Standing","30""","12"" x
6""","27"" x 6
1/2""",".0005","Style","Screen","Range","Stage","Reolution"

8305,"COOLANT FILTERING SYSTEMS","2005","Knoll","SF
2000/F60-4",,"Excellent","Yes",,"2005 Knoll SF 2000/F60-4
","C5761",,"-1","Yes","360 Liters Per Min",,,,,"Flow Rate","Max
PSI","Filtration","HP",

8304,"COOLANT FILTERING SYSTEMS","2006","Knoll","VRF
450/550",,"Excellent","Yes",,"2006 Knoll VRF 450/550
","C5761",,"-1","Yes","450 Liters per Min",,,,,"Flow Rate","Max
PSI","Filtration","HP",

8907,"COOLANT FILTERING SYSTEMS","2004","Transor","FWC-110-TRP",,"Very
Good","Yes",,"2004 Transor FWC-110-TRP
","C5761",$48000.00,"-1","Yes","1",,"1 Milcron",,,"Flow Rate","Max
PSI","Filtration","HP",

9958,"COOLANT PUMP
SYSTEM","2002","ChipBlaster","1513V",,"Good","No",,"2002 ChipBlaster
1513V ","C5760",$2800.00,"-1","Yes","1,500 PSI","13 GPM","55
Gallons","10",,"Max. Presuure","Max. CFM","Tank Capacity","HP",

8327,"COORDINATE MEASURING MACHINES","1997","Brown and
Sharpe","Micro-Xcel PFX 4-5-4 DCC",,"Very Good","Yes","22"" x 30"" x
17"" Table, 18"" x 20"" x 16"" Travels, Computer With MM4 Software,
Digitizing and Scanning Capabilities, B & S Controller, Computer,
Joystick Control","1997 Brown and Sharpe Micro-Xcel PFX 4-5-4 DCC
","C5901",$18000.00,"-1","Yes","Gantry","18"" x 20"" x 16""","22"" x
30"" x 17""","500 lbs",,"Style","Travels","Work Area","Work Load",

8765,"COORDINATE MEASURING MACHINES","1986","Brown and
Sharpe","Validator",,"Good","Yes",,"1986 Brown and Sharpe Validator
","C5901",,"-1","Yes","Gantry","24"" x 24"" x 10""","26"" x 24"" x
29""","1,500 lbs",,"Style","Travels","Work Area","Work Load",

8372,"COORDINATE MEASURING MACHINES","1989","Brown and Sharpe","Xcel
7-10-7",,"Very Good","Yes",,"1989 Brown and Sharpe Xcel 7-10-7
","C5901",$26000.00,"-1","Yes","Gantry","26"" x 40"" x 26""","26"" x
42"" x 111""","1,500 lbs",,"Style","Travels","Work Area","Work Load",

10387,"COORDINATE MEASURING MACHINES","1985","Numerex","2428-18",,"Very
Good","Yes",,"1985 Numerex 2428-18
","C5901",$10500.00,"-1","Yes","Gantry","27.559"" x 23.622"" x
16""","36"" x 25"" x 10""","450 lbs",,"Style","Travels","Work
Area","Work Load",

8184,"COORDINATE MEASURING MACHINES","2000","Optical Gaging
Products","Smartscope Avant ZIP 300",,"Very Good","Yes",,"2000 Optical
Gaging Products Smartscope Avant ZIP 300
","C5901",$45000.00,"0","Yes","Bench","12"" x 12"" x 8""","14"" x
12""","85 lbs",,"Style","Travels","Work Area","Work Load",

8183,"COORDINATE MEASURING MACHINES","1996","Optical Gaging
Products","Smartscope 200 MVP",,"Very Good","Yes",,"1996 Optical Gaging
Products Smartscope 200 MVP ","C5901",$14000.00,"0","Yes","Bench","8"" x
6"" x 6""","10"" x 8""","55 lbs",,"Style","Travels","Work Area","Work
Load",

8185,"COORDINATE MEASURING MACHINES",,"Optical Gaging
Products","Smartscope 200 MVP",,"Very Good","Yes",," Optical Gaging
Products Smartscope 200 MVP ","C5901",$23000.00,"0","Yes","Bench","8"" x
6"" x 6""","10"" x 8""","55 lbs",,"Style","Travels","Work Area","Work
Load",

8174,"COORDINATE MEASURING MACHINES","1999","Renishaw","Cyclone
Digitizer",,"Very Good","Yes","26"" x 25"" x 18"" Table, 23.6"" x 19.7""
x 15.7"" Travels, Computer With Software, Extra Fixtures, Full
Digitizing Capabilities","1999 Renishaw Cyclone Digitizer
","C5901",$21000.00,"-1","Yes","Gantry","23.6"" x 19.7"" x 15.7""","26""
x 25"" x 18""","440 lbs",,"Style","Travels","Work Area","Work Load",

9772,"COORDINATE MEASURING MACHINES","2007","Sheffield","Discovery II
D-8",,"Good","No",,"2007 Sheffield Discovery II D-8
","C5901",$32500.00,"0","No","Gantry","20"" x 24"" x 16""",,"250
lbs",,"Style","Travels","Work Area","Work Load",

10118,"DRILLING and TAPPING MACHINES
CNC","1996","Amera-Seiki","DTM-40","Mitsubishi 520M","Good","Yes",,"1996
Amera-Seiki DTM-40 Mitsubishi 520M","D3797",$9800.00,"-1","Yes","23.5""
x 13.75""","20"" x 13.75"" x
18""","6,000","10","10","Table","Travels","RPM","HP","ATC"

8684,"DRILLING and TAPPING MACHINES CNC","2007","Ares
Seiki","R-560-14","Mitsubishi 64SM","Very Good","Yes",,"2007 Ares Seiki
R-560-14 Mitsubishi 64SM","D3797",$61000.00,"0","Yes","25.6"" x
16.1""","22"" x 15.7"" x
11.8""","12,000","10","14","Table","Travels","RPM","HP","ATC"

9058,"DRILLING and TAPPING MACHINES
CNC","2006","Bridgeport","DT-480-DT-APC","Fanuc OiMC","Very
Good","Yes",,"2006 Bridgeport DT-480-DT-APC Fanuc
OiMC","D3797",$35500.00,"0","Yes","33.1"" x 19.7""","18.89"" x 12.6"" x
16.9""","15,000","6","10","Table","Travels","RPM","HP","ATC"

10303,"DRILLING and TAPPING MACHINES
CNC","1995","Brother","TC-323","Brother CNC 730","Good","Yes","33.1"" x
19.7"" Table, 16.5"" x 12.6"" x 10.2"" Travels, 10,000 RPM, 30 Taper, 6
HP, 10 ATC, Quick Table Two Surface Pallet Changer","1995 Brother TC-323
Brother CNC 730","D3797",$17000.00,"-1","Yes","33.1"" x 19.7""","16.54""
x 11.81"" x
9.84""","10,000","4.6","10","Table","Travels","RPM","HP","ATC"

9981,"DRILLING and TAPPING MACHINES
CNC","1994","Brother","TC-221","Brother CNC 400","Good","Yes",,"1994
Brother TC-221 Brother CNC 400","D3797",$15000.00,"-1","Yes","23.6"" x
11.8""","16.5"" x 11.8"" x
9.8""","6,000","2","10","Table","Travels","RPM","HP","ATC"

10293,"DRILLING and TAPPING MACHINES
CNC","2001","Brother","TC-22A","Brother CNC AOO","Very
Good","Yes",,"2001 Brother TC-22A Brother CNC
AOO","D3797",$39500.00,"0","Yes","25.59"" x 15.7""","19.68"" x 15.7"" x
16""","12,000","9.6","26","Table","Travels","RPM","HP","ATC"

10304,"DRILLING and TAPPING MACHINES
CNC","1995","Brother","TC-323","Brother CNC 730","Good","Yes",,"1995
Brother TC-323 Brother CNC 730","D3797",$18500.00,"-1","Yes","33.1"" x
19.7""","16.54"" x 11.81"" x
9.84""","10,000","4.6","10","Table","Travels","RPM","HP","ATC"

9840,"DRILLING and TAPPING MACHINES
CNC","2003","Brother","TC-S2A-0","Brother CNC AOO","Very
Good","Yes",,"2003 Brother TC-S2A-0 Brother CNC
AOO","D3797",$44500.00,"0","Yes","31.5"" x 12.6""","27.6"" x 14.2"" x
10.6""","10,000","8.4","14","Table","Travels","RPM","HP","ATC"

9850,"DRILLING and TAPPING MACHINES
CNC","2003","Brother","TC-22A-0","Brother CNC AOO","Very
Good","Yes",,"2003 Brother TC-22A-0 Brother CNC
AOO","D3797",$60000.00,"0","Yes","31.5"" x 15.7""","27.5"" x 15.7"" x
16""","12,000","9.6","26","Table","Travels","RPM","HP","ATC"

8642,"DRILLING and TAPPING MACHINES
CNC","1998","Brother","TC-324","Brother CNC 630","Good","Yes",,"1998
Brother TC-324 Brother CNC 630","D3797",$29500.00,"0","Yes","33.1"" x
19.7""","16.5"" x 11.8"" x
9.8""","10,000","6","10","Table","Travels","RPM","HP","ATC"

9841,"DRILLING and TAPPING MACHINES
CNC","2003","Brother","TC-S2B-0","Brother CNC AOO","Very
Good","Yes",,"2003 Brother TC-S2B-0 Brother CNC
AOO","D3797",$42500.00,"0","Yes","31.5"" x 12.6""","27.5"" x 14.17"" x
12.6""","10,000","13","21","Table","Travels","RPM","HP","ATC"

9901,"DRILLING and TAPPING MACHINES
CNC","2006","Brother","TC-S2C","Brother CNC AOO","Very
Good","Yes",,"2006 Brother TC-S2C Brother CNC
AOO","D3797",$59900.00,"0","Yes","31.5"" x 12.6""","27.6"" x 15.7"" x
11.8""","10,000","13","14","Table","Travels","RPM","HP","ATC"

10285,"DRILLING and TAPPING MACHINES CNC","1995","Enshu","DTCL
APC","Fanuc OM","Good","Yes",,"1995 Enshu DTCL APC Fanuc
OM","D3797",$19500.00,"-1","Yes","23"" x 11 3/4""","19.7"" x 15.7"" x
11.8""","10,000","7.4","16","Table","Travels","RPM","HP","ATC"

9483,"DRILLING and TAPPING MACHINES CNC","2008","Fanuc","Robodrill
A-T14iD","Fanuc 31iA5","Excellent","Yes",,"2008 Fanuc Robodrill A-T14iD
Fanuc 31iA5","D3797",$129900.00,"0","Yes","25.6"" x 16""","19.68"" x
15.75"" x
12.99""","24,000","7.5","14","Table","Travels","RPM","HP","ATC"

10267,"DRILLING and TAPPING MACHINES CNC","2009","Fanuc","Robodrill
A-T21iFL","Fanuc 31iA5","Very Good","Yes",,"2009 Fanuc Robodrill
A-T21iFL Fanuc 31iA5","D3797",$96500.00,"0","Yes","33.46"" x
16.14""","27"" x 15.75"" x
12.99""","10,000","14","21","Table","Travels","RPM","HP","ATC"

10480,"DRILLING and TAPPING MACHINES CNC","2000","Fanuc","Robodrill
A-T14iBL APC","Fanuc 16iMA","Very Good","Yes",,"2000 Fanuc Robodrill
A-T14iBL APC Fanuc 16iMA","D3797",$54500.00,"0","Yes","27.56"" x
15.35""","27.56"" x 15.75"" x
13""","15,000","7.5","14","Table","Travels","RPM","HP","ATC"

10481,"DRILLING and TAPPING MACHINES CNC","2007","Fanuc","Robodrill
A-T14iE","Fanuc 31iA5","Very Good","Yes","33.46"" x 16.14"" Table,
27.56"" x 15.75"" x 12.99"" Travels, 10,000 RPM, 30 Taper, 7.5 HP, 21
ATC, DDR Rotary Table, Rigid Tapping","2007 Fanuc Robodrill A-T14iE
Fanuc 31iA5","D3797",$105000.00,"0","Yes","25.6"" x 15.74""","19.68"" x
15.74"" x
12.99""","10,000","7.5","14","Table","Travels","RPM","HP","ATC"

9552,"DRILLING and TAPPING MACHINES CNC","2000","Fanuc","Robodrill
A-T14iA APC","Fanuc 16iM","Very Good","Yes",,"2000 Fanuc Robodrill
A-T14iA APC Fanuc 16iM","D3797",$46500.00,"0","Yes","19.5"" x
14.9""","19.7"" x 14.98"" x
11.8""","15,000","10.3","14","Table","Travels","RPM","HP","ATC"

10564,"DRILLING and TAPPING MACHINES CNC","2001","Fanuc","Robodrill
A-T14iB","Fanuc16iM","Very Good","Yes",,"2001 Fanuc Robodrill A-T14iB
Fanuc16iM","D3797",$49500.00,"0","Yes","25.6"" x 15.74""","19.68"" x
15.75"" x
12.99""","15,000","7.5","14","Table","Travels","RPM","HP","ATC"

10479,"DRILLING and TAPPING MACHINES CNC","2005","Haas","MDC-500","Haas
32 BIT","Very Good","Yes",,"2005 Haas MDC-500 Haas 32
BIT","D3797",$57500.00,"0","Yes","20"" x 12.75""","20"" x 14"" x
20""","7,500","20","24","Table","Travels","RPM","HP","ATC"

8435,"DRILLING and TAPPING MACHINES
CNC","1999","Hyundai","SPT-V30TD","Yasnac J-50M","Very
Good","Yes","Tables - 23.62"" x 17.7, Travels - 19.68"" x 11.81"" x
11.81"", 8,000 RPM, 7.5 HP, 14 ATC, Spindle Taper Air Blow, EIA / ISO,
RS-232 Port Programming, Splash Guard","1999 Hyundai SPT-V30TD Yasnac
J-50M","D3797",$26500.00,"-1","Yes","23.62"" x 17.7""","19.68"" x
11.81"" x 11.81""","8,000","7.5","14","Table","Travels","RPM","HP","ATC"

8739,"DRILLS, GUN","1989","Techni-Drill","BTA",,"Good","Yes",,"1989
Techni-Drill BTA
","D4554",$27500.00,"0","Yes","1""","18""",,"10","2","Max.
Cap.","Stoke","RPM","HP","Spindles"

9887,"DRILLS, H.D. and SENSITIVE, MULTI
SPINDLE",,"Natco","F3B",,"Good","No",," Natco F3B
","D4803",,"-1","Yes","1",,"2,030","10","16","Max.
Cap.","Stoke","RPM","HP","Spindles"

9869,"DRILLS, H.D. and SENSITIVE, MULTI
SPINDLE","1981","Natco",,,"Good","No",,"1981 Natco
","D4803",,"-1","Yes","1",,,"25","16","Max.
Cap.","Stoke","RPM","HP","Spindles"

10182,"DRILLS, HEAVY DUTY and SENSITIVE, SGL. VERT.
SPDL.","1967","Giddings and Lewis","Model 28",,"Good","Yes",,"1967
Giddings and Lewis Model 28
","D4810",$6800.00,"-1","Yes","14""",,"1,200","10","1","Max.
Cap.","Stoke","RPM","HP","Spindles"

10394,"DRILLS, RADIAL","19??","Carlton","5' x 17""",,"Very
Good","Yes",,"19?? Carlton 5' x 17""
","D5700",,"-1","Yes","5'","17""","65"" x
50""","1,000","15","Arm","Column","Table","RPM","HP"

9269,"DRILLS, RADIAL","1954","Carlton","4A",,"Very Good","Yes","6' Arm,
19"" Column, 72"" Under Spindle, 15 HP, 1,500 RPM, Power Clamping, Power
Elevation, Box Table","1954 Carlton 4A
","D5700",$8000.00,"-1","Yes","6'","19""","83"" x
50""","1,500","15","Arm","Column","Table","RPM","HP"

7552,"DRILLS, RADIAL","1980","Cegielski (Polamco)","GRV-554",,"Very
Good","Yes","8' Arm, 18"" Column, 68.9"" Under Spindle, 20 HP, 1,600
RPM, Drilling Capacity Mild Steel 2.5"", Drilling Capacity Mild Cast
3.1"", Box Table, Power Clamping, Power Elevation","1980 Cegielski
(Polamco) GRV-554 ","D5700",$23000.00,"-1","Yes","8'","18""","94"" x
50""","1,600","20","Arm","Column","Table","RPM","HP"

9027,"DRILLS, RADIAL","1969","Giddings and
Lewis","Chipmaster",,"Good","Yes",,"1969 Giddings and Lewis Chipmaster
","D5700",$14500.00,"0","Yes","63 3/4""","16""","71"" x
42""","1,750","15","Arm","Column","Table","RPM","HP"

9938,"DRILLS, RADIAL","1962","Giddings and Lewis","6' x 15""",,"Very
Good","Yes","15"" Column, 6' Arm, 25 HP, # 6 Taper, Power Clamping to
Arm and Head, Power Elevation of Arm, Power Rapid Head Traverse, Box
Table","1962 Giddings and Lewis 6' x 15""
","D5700",$10000.00,"-1","Yes","6'","17""","83"" x
50""","1,500","25","Arm","Column","Table","RPM","HP"

9026,"DRILLS, RADIAL","1978","Ooya","RE3-1600",,"Good","Yes",,"1978 Ooya
RE3-1600 ","D5700",$17500.00,"0","Yes","63 3/4""","16""","83"" x
45""","2,180","10","Arm","Column","Table","RPM","HP"

10337,"EDM - RAM, CNC","1999","Agie","Mondo 2","Agie Futura IV","Very
Good","Yes",,"1999 Agie Mondo 2 Agie Futura
IV","E2425",$15000.00,"0","Yes","11.81"" x 15.75""","11.8"" x 15"" x
12""","28"" x 21"" x 14""","40
Amp",,"Table","Travel","Tank","Power","ATC"

9382,"EDM - RAM, CNC","1991","Charmilles","Roboform
20","Charmilles","Good","Yes","15.62"" x 11.8"" Table, 11.81"" x 9.8"" x
9.8"" Travels, 16 ATC, 32 Amps, 3-R Tooling, RS-232 Port, Transformer,
Rustlick EDM Fluid, New Filters, 10,583 Cutting Hours","1991 Charmilles
Roboform 20 Charmilles","E2425",$11500.00,"-1","Yes","15.62"" x
11.8""","11.81"" x 9.8"" x 9.8""","29.1"" x 20.5"" x 13.6""","32
Amp","16","Table","Travel","Tank","Power","ATC"

9767,"EDM - RAM, CNC","1998","Hansvedt","MS- 4 3050 Foreman",,"Very
Good","Yes",,"1998 Hansvedt MS- 4 3050 Foreman
","E2425",$16000.00,"-1","Yes","15"" x 9""","12"" x 7"" x 8""","24"" x
11"" x 16""","30 / 50 Amp","6","Table","Travel","Tank","Power","ATC"

8625,"EDM - RAM, CNC","1993","Mitsubishi","M-25-J","Mitsubishi
Control","Very Good","Yes","19.6"" x 13.7"" Table, 9.8"" x 7.8"" x 9.8""
Travels, 29.53"" x 13"" x 20"" Maximum Workpiece, 55 Amp, System 3-R
Tooling, 1 Meg of Memory, 14"" Color CRT, Programmable C-Axis, Fire
Extinguisher, Filtration Unit, 3.5"" Floppy Drive","1993 Mitsubishi
M-25-J Mitsubishi Control","E2425",$25000.00,"-1","Yes","19.6"" x
13.7""","9.8"" x 7.8"" x 9.8'","32"" x 14"" x 23""","55
Amp",,"Table","Travel","Tank","Power","ATC"

9429,"EDM - RAM, CNC","1993","Mitsubishi","M-25-J","Mitsubishi
Control","Very","Yes","19.6"" x 13.7"" Table, 9.8"" x 7.8"" x 9.8""
Travels, 29.53"" x 13"" x 20"" Maximum Workpiece, 35 Amp, System 3-R
Tooling, 14"" Color CRT, Programmable C-Axis, Fire Extinguisher,
Transformer, Flexible Automatic Programming (FAP)","1993 Mitsubishi
M-25-J Mitsubishi Control","E2425",$28000.00,"-1","Yes","19.6"" x
13.7""","9.8"" x 7.8"" x 9.8""","32"" x 14"" x 23""","35
Amp",,"Table","Travel","Tank","Power","ATC"

8512,"EDM - RAM, CNC","1997","Pacific","PC-50 EX",,"Good","Yes",,"1997
Pacific PC-50 EX ","E2425",$16500.00,"0","Yes","19"" x 10""","10"" x 6""
x 6""","26"" x 16"" x 11""","55
Amp","16","Table","Travel","Tank","Power","ATC"

10457,"EDM - RAM, CNC","2006","Sodick","AQ-55L","Sodick","Like
New","Yes",,"2006 Sodick AQ-55L
Sodick","E2425",$82000.00,"0","Yes","30"" x 22""","22"" x 16"" x
13.7""","37” x 16” x 29”","40
Amp","6","Table","Travel","Tank","Power","ATC"

9188,"LATHES, CNC, 2-AXIS, UNIVERSAL","1980","Mori-Seiki","SL-6","Fanuc
6T","Good","Yes",,"1980 Mori-Seiki SL-6 Fanuc
6T","L2150",$29000.00,"0","Yes","35""","13.77"" x
33.86""","1,800","3.5""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

9017,"LATHES, CNC, 2-AXIS, UNIVERSAL","2004","Mori-Seiki","CL-2000
BT","Mori-Seiki MSG-805","Very Good","Yes",,"2004 Mori-Seiki CL-2000 BT
Mori-Seiki MSG-805","L2150",$62000.00,"0","Yes","20.1""","9.6"" x
24""","3,500","2.5""","10","Swing","Travels","RPM","Bar Cap.","Stations"

9691,"LATHES, CNC, 2-AXIS,
UNIVERSAL","1996","Mori-Seiki","SL-75B","Fanuc 18T","Very
Good","Yes",,"1996 Mori-Seiki SL-75B Fanuc
18T","L2150",$209900.00,"0","Yes","35.8""","15.75"" x
61""","1,010","5.6""","12","Swing","Travels","RPM","Bar Cap.","Stations"

9682,"LATHES, CNC, 2-AXIS, UNIVERSAL","1981","Mori-Seiki","LL-7B
2500","Fanuc OT","Good","Yes",,"1981 Mori-Seiki LL-7B 2500 Fanuc
OT","L2150",$84500.00,"0","Yes","42.9""","26.5"" x
98""","1,150","4.1""","8","Swing","Travels","RPM","Bar Cap.","Stations"

9681,"LATHES, CNC, 2-AXIS, UNIVERSAL","1986","Mori-Seiki","LL-8B
1500","Fanuc 11T","Very Good","Yes",,"1986 Mori-Seiki LL-8B 1500 Fanuc
11T","L2150",$186500.00,"0","Yes","54""","28.1"" x
64""","550","14.5""","8","Swing","Travels","RPM","Bar Cap.","Stations"

9613,"LATHES, CNC, 2-AXIS, UNIVERSAL","2002","Mori-Seiki","CL-2000
B","Mori-Seiki MSG-805","Very Good","Yes",,"2002 Mori-Seiki CL-2000 B
Mori-Seiki MSG-805","L2150",$49500.00,"0","Yes","20.1""","9.6"" x
14.6""","3,500","2.5""","10","Swing","Travels","RPM","Bar
Cap.","Stations"

10566,"LATHES, CNC, 2-AXIS, UNIVERSAL","2007","Okuma","ES-L8
II","OSP-U10L","Very Good","Yes","Swing 21.65"", Swing Over C.S.
20.47"", Maximum Turning Diameter 12.20"", Length 19.68"", 3,500 RPM, 20
HP, 12 Sta. Turret, 10"" 3-Jaw Hydraulic Chuck, Chip Conveyor, Some
Turret Tooling, S30 Collet Chuck, Part Catcher, Hydraulic Tailstock, One
Touch IGF","2007 Okuma ES-L8 II
OSP-U10L","L2150",$62000.00,"0","Yes","21.65""","8.10"" x
20.47""","3,000","2.75""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10019,"LATHES, CNC, 2-AXIS, UNIVERSAL","1993","Okuma","Cadet
LNC-8","OSP-5020L","Good","Yes",,"1993 Okuma Cadet LNC-8
OSP-5020L","L2150",$18500.00,"0","Yes","15.75""","6.87"" x
20.47""","4,200","1.77""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10559,"LATHES, CNC, 2-AXIS, UNIVERSAL","1982","Okuma","LC-30 1SC /
1000","OSP-3000L","Good","Yes","19.69"" Swing, 16.14 SOC, 17.72 Max.
Dia., 38.58 Length, 2.5"" Bar Cap., 30 HP, 12 Sta. Turret, Tailstock,
12"" 3-Jaw Chuck, Miscellaneous Tool Holders, Chip Conveyor, Coolant
System, RS-232 Port","1982 Okuma LC-30 1SC / 1000
OSP-3000L","L2150",$8000.00,"-1","Yes","19.69""","11.42"" x
40.16""","3,000","2.5","12","Swing","Travels","RPM","Bar
Cap.","Stations"

8261,"LATHES, CNC, 2-AXIS, UNIVERSAL","1989","Okuma","LC-30 1SC /
1000","OSP-5000LG","Fair","Yes",,"1989 Okuma LC-30 1SC / 1000
OSP-5000LG","L2150",$22500.00,"-1","Yes","19.69""","11.42"" x
40.16""","3,000","2.5""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10560,"LATHES, CNC, 2-AXIS, UNIVERSAL","1988","Okuma","LC-40 1SC /
750","OSP-5000L","Good","Yes",,"1988 Okuma LC-40 1SC / 750
OSP-5000L","L2150",$18000.00,"-1","Yes","23.62""","11.22"" x
28.74""","2,500","3""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10622,"LATHES, CNC, 2-AXIS, UNIVERSAL","2000","Okuma","Crown L-1060
SB","OSP-700L","Very Good","Yes",,"2000 Okuma Crown L-1060 SB
OSP-700L","L2150",$39900.00,"0","Yes","21.65""","7.28"" x
20.47""","4,200","2.2","12","Swing","Travels","RPM","Bar
Cap.","Stations"

7362,"LATHES, CNC, 2-AXIS, UNIVERSAL","2000","Okuma","Crown L-1420 / 650
BB","OSP-U10L","Good","Yes","24.41 Swing, 18.90"" S.O.C. , 14.17""
Turning Dia., 27"" Centers, 2,800 RPM, 30 HP, 4.72 Spindle Bore, 12 Sta.
Turret, 15"" 3-Jaw Kitagawa Hydraulic Chuck, Tow Along Tailstock, IGF,
Lap 4, Auto Chamfering, MAC Man, Nose Radius 2B","2000 Okuma Crown
L-1420 / 650 BB OSP-U10L","L2150",$59900.00,"-1","Yes","24.41""","9.05""
x 26.38""","2,800","3.62""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10365,"LATHES, CNC, 2-AXIS, UNIVERSAL","1995","Okuma","Crown L-1420 /
650 BB","OSP-5020L","Very Good","Yes",,"1995 Okuma Crown L-1420 / 650 BB
OSP-5020L","L2150",$34500.00,"0","Yes","24.41""","9.05"" x
26.38""","2,800","3.62""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10400,"LATHES, CNC, 2-AXIS, UNIVERSAL","2002","Okuma","ES-L10
III","OSP-U10L","Good","Yes","Swing 21.65"", Swing Over Cross Slide
20.47"", Maximum Turning Diameter 12.20"", Length 19.68"", 3,000 RPM, 15
HP, 12 Sta. Turret, Tailstock, 10"" 3-Jaw Chuck, Chip Conveyor","2002
Okuma ES-L10 III OSP-U10L","L2150",$42500.00,"0","Yes","21.65""","8.10""
x 20.47""","3,800","2.75""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10160,"LATHES, CNC, 2-AXIS, UNIVERSAL","1997","Okuma","Crown 762
BB","OSP-700L","Very Good","Yes",,"1997 Okuma Crown 762 BB
OSP-700L","L2150",$39500.00,"0","Yes","21.65""","7.28"" x
20.47""","3,500","2.75""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10593,"LATHES, CNC, 2-AXIS, UNIVERSAL","2001","Okuma","LB-45
II-3000","OSP-7000L","Very Good","Yes",,"2001 Okuma LB-45 II-3000
OSP-7000L","L2150",$249500.00,"0","Yes","33.7""","17.32"" x
81.1""","2,800","3.75""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10161,"LATHES, CNC, 2-AXIS, UNIVERSAL","1999","Okuma","Crown 762
BB","OSP-U10L","Good","Yes",,"1999 Okuma Crown 762 BB
OSP-U10L","L2150",$24500.00,"0","Yes","21.65""","7.28"" x
20.47""","3,500","2.75""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10595,"LATHES, CNC, 2-AXIS,
UNIVERSAL","1993","Okuma","LB-15","OSP-5020L","Good","Yes",,"1993 Okuma
LB-15 OSP-5020L","L2150",$16500.00,"0","Yes","15.75""","6.89"" x
20.47""","4,200","1.75""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

9935,"LATHES, CNC, 2-AXIS, UNIVERSAL","1984","Okuma","LH-50NBD
2000","OSP-3000L","Very Good","Yes",,"1984 Okuma LH-50NBD 2000
OSP-3000L","L2150",$26500.00,"0","Yes","36.02""","16"" x
59""","1,000","6.89""","8 / 8","Swing","Travels","RPM","Bar
Cap.","Stations"

9355,"EDM - RAM, CNC","1986","Sodick","A3C","Sodick Mark
VII","Good","Yes",,"1986 Sodick A3C Sodick Mark
VII","E2425",$4500.00,"-1","Yes","30"" x 20""","12"" x 8"" x 10""","36""
x 16"" x 22""","40 Amp",,"Table","Travel","Tank","Power","ATC"

9749,"EDM - WIRE, CNC","1991","Agie","Agitron 50","Agiematic
D",,"Yes",,"1991 Agie Agitron 50 Agiematic D","E2475",,"-1","On Way","21
1/2"" x 17 1/2""","23"" x 19"" x 10""","317 Gallons","30
Amp",,"Table","Travel","Tank","Power",

10241,"EDM - WIRE, CNC","2001","Agie","Classic 2","Agievision
2","Excellent","Yes","Maximum Workpiece Size - 29.5"" x 21.6"" x 9.8"",
Travels - 13.8"" x 9.8"" x 10.1"" x 2.8"" x 2.8"", AWT, Dial Arm and
Indicator, Affinity Chiller, Manual Pulse Generator, Full Five Axis
Control, High Speed Super Surface (HSSC) Generator, Wire Extraction and
Chopping System, Alignment Device","2001 Agie Classic 2 Agievision
2","E2475",$62500.00,"-1","Yes","31"" x 22""","13.7795"" x 9.8425"" x
10.07872""","34"" x 24"" x 12""",,,"Table","Travel","Tank","Power",

9508,"EDM - WIRE, CNC","2002","Charmilles","Robofil
690","Charmilles","Very Good","Yes",,"2002 Charmilles Robofil 690
Charmilles","E2475",$85900.00,"0","Yes","48.3"" x 36.4""","31.5"" x
23.6"" x 15.75""","317 Gallons","50
Amp",,"Table","Travel","Tank","Power",

7035,"EDM - WIRE, CNC","2001","Charmilles","Robofil
240","Charmilles","Very Good","Yes",,"2001 Charmilles Robofil 240
Charmilles","E2475",$62000.00,"-1","Yes","26.77"" x 17.72""","13.77"" x
8.66"" x 8.66""","201 Gallons","40
Amp",,"Table","Travel","Tank","Power",

10504,"EDM - WIRE, CNC","1990","Leblond-Makino","Model
EE3",,"Good","Yes",,"1990 Leblond-Makino Model EE3
","E2475",$10500.00,"-1","Yes","19.5"" x 14.5""","14.2"" x 9.8"" x
9""","64",,,"Table","Travel","Tank","Power",

10175,"EDM - WIRE, CNC","2007","Makino","SP-43","Makino
WireWIZARD","Excellent","Yes",,"2007 Makino SP-43 Makino
WireWIZARD","E2475",$80000.00,"-1","Yes","28.7"" x 22.8""","17.8"" x
11.8"" x 12.6""","105 Gallons","50
Amp",,"Table","Travel","Tank","Power",

10008,"EDM - WIRE, CNC","1999","Mitsubishi","FX-10 K","Mitsubishi","Very
Good","Yes",,"1999 Mitsubishi FX-10 K
Mitsubishi","E2475",$40000.00,"0","Yes","24.80"" x 20.86""","13.77"" x
9.84"" x 8.66""","105 Gallons","50
Amp",,"Table","Travel","Tank","Power",

10018,"EDM - WIRE, CNC","1998","Mitsubishi","FX-10
K","Mitsubishi","Needs Repair","Yes",,"1998 Mitsubishi FX-10 K
Mitsubishi","E2475",$39000.00,"0","Yes","24.80"" x 20.86""","13.79"" x
9.84"" x 8.66""","105 Gallons","50
Amp",,"Table","Travel","Tank","Power",

10017,"EDM - WIRE, CNC","1999","Mitsubishi","FX-10 K","Mitsubishi","Very
Good","Yes",,"1999 Mitsubishi FX-10 K
Mitsubishi","E2475",$40000.00,"0","Yes","24.80"" x 20.86""","13.79"" x
9.84"" x 8.66""","105 Gallons","50
Amp",,"Table","Travel","Tank","Power",

9800,"EDM - WIRE, CNC","2000","Mitsubishi","FX-20K",,"Very
Good","Yes",,"2000 Mitsubishi FX-20K
","E2475",$42500.00,"0","Yes","30.7"" x 24.8""","19.69"" x 13.77"" x
11.81""","210 Gallons","50 Amp",,"Table","Travel","Tank","Power",

9053,"EDM - WIRE,
CNC","1996/2007","Mitsubishi","FX-10","Mitsubishi","Very
Good","Yes",,"1996/2007 Mitsubishi FX-10
Mitsubishi","E2475",$39900.00,"0","Yes","24.80"" x 20.86""","13.77"" x
9.84"" x 8.66""","105 Gallons","50
Amp",,"Table","Travel","Tank","Power",

10020,"EDM - WIRE, CNC","1996/2007","Mitsubishi","FX-10
K","Mitsubishi","Very Good","Yes",,"1996/2007 Mitsubishi FX-10 K
Mitsubishi","E2475",$44000.00,"0","Yes","24.80"" x 20.86""","13.79"" x
9.84"" x 8.66""","105 Gallons","50
Amp",,"Table","Travel","Tank","Power",

9357,"EDM - WIRE, CNC","1996/2005","Sodick","A-500 WP","Sodick
Mark-21","Excellent","Yes","Tank - 30"" x 18"" x 12"", Travels -
19.685"" x 13.8"" x 10.63"", 50 Amp, Floppy Drive, Simultaneous U-V
Taper Control, Chiller, APT Programmer, Automatic Wire Threading,
Machine Refurbished in 2005, Very Little Use Since","1996/2005 Sodick
A-500 WP Sodick Mark-21","E2475",$30000.00,"-1","Yes","30"" x
20""","19.85"" x 13.8"" x 10.63""","105 Gallons","50
Amp",,"Table","Travel","Tank","Power",

8980,"END FINISHING MACHINES (Including NC and
CNC)",,"Vaill","6A",,"Good","Yes",," Vaill 6A
","E5650",$4955.00,"0","Yes","1 1/2""","3""",,"1 1/2""","7,800
Lbs","Diameter","Work Stroke","Work Speed","Clamp Stroke","Work
Pressure"

8981,"END FINISHING MACHINES (Including NC and
CNC)",,"Vaill","7A",,"Good","Yes",," Vaill 7A
","E5650",$7950.00,"0","Yes","3 1/2""","6""","2 1/2"" per
sec","2""","42,000 Lbs","Diameter","Work Stroke","Work Speed","Clamp
Stroke","Work Pressure"

9190,"FLAME CUTTER, CNC","2008","Torchmate","Torchmate
3","Torchmate","Like New","Yes","48"" x 96"" Cutting Capacity, 1/4"" - 1
1/2"" Plasma Cutting Capacity, Hypertherm 1650 Head, Automatic Height
Control Sensing On Plasma Head To Prevent Warping","2008 Torchmate
Torchmate 3 Torchmate","F1925",$9900.00,"-1","Yes","1",,,,,"Cut
Cap.","Rail","Style","# Head",

10501,"GRINDERS, BELT","1994","Timesaver","137-1HDMW",,"Very
Good","Yes","37"" Wide Belt, 36"" x 8"" Part Cap., 20 HP, Wet Base,
Fully Equipped, Many Extra Grinding Belts","1994 Timesaver 137-1HDMW
","G3975",$15000.00,"-1","Yes","37""","36""","8""","20","Wet","Conveyor
Width","Max. Part Width","Max. Part Height","HP","Collector System"

8999,"GRINDERS, CRANKSHAFT",,"Landis","22"" x 76""",,"Good","Yes",,"
Landis 22"" x 76""
","G4526",$37500.00,"0","Yes","1",,,,,"Swing","Centers","Wheel","HP","Stoke"

9001,"GRINDERS, CRANKSHAFT",,"Landis","22"" x 76""",,"Good","Yes",,"
Landis 22"" x 76""
","G4526",$26500.00,"0","Yes","1",,,,,"Swing","Centers","Wheel","HP","Stoke"

8995,"GRINDERS, CRANKSHAFT",,"Schou","1500/270",,"Good","Yes",," Schou
1500/270
","G4526",$19500.00,"0","Yes","1",,,,,"Swing","Centers","Wheel","HP","Stoke"

8996,"GRINDERS, CRANKSHAFT",,"Schou","1600/260P",,"Good","Yes",," Schou
1600/260P
","G4526",$19500.00,"0","Yes","1",,,,,"Swing","Centers","Wheel","HP","Stoke"

8994,"GRINDERS,
CRANKSHAFT","1983","Schou","2000/340",,"Good","Yes",,"1983 Schou
2000/340
","G4526",$19500.00,"0","Yes","1",,,,,"Swing","Centers","Wheel","HP","Stoke"

8484,"GRINDERS, CYLINDRICAL
UNIVERSAL","19??","Cincinnati","DE",,"Fair","Yes",,"19?? Cincinnati DE
","G4800",,"-1","Yes","1",,,,,"Swing","Centers","Table","Grind
Wheel","Work Wheel"

8711,"GRINDERS, CYLINDRICAL UNIVERSAL","1975","Heald","273A",,"Very
Good","Yes",,"1975 Heald 273A
","G4800",$27500.00,"0","Yes","1",,,,,"Swing","Centers","Table","Grind
Wheel","Work Wheel"

8353,"GRINDERS, CYLINDRICAL UNIVERSAL","1975","Karsten","KC-AS
1600",,"Good","Yes","14.17"" Work Dia., 63"" Length, 14.74"" x 4"" x 5""
Wheel, Internal Spindle, Pendant Control, Wheel Dresser, Barnes Coolant
Filtration System, Holding Tight Tolerances of +/- .00025","1975 Karsten
KC-AS 1600
","G4800",$22500.00,"-1","Yes","1",,,,,"Swing","Centers","Table","Grind
Wheel","Work Wheel"

8992,"GRINDERS, CYLINDRICAL UNIVERSAL","1995/2002","Landis","1R","Fanuc
18GCA","Very Good","Yes",,"1995/2002 Landis 1R Fanuc
18GCA","G4800",$19500.00,"0","Yes","1",,,,,"Swing","Centers","Table","Grind
Wheel","Work Wheel"

8193,"GRINDERS, CYLINDRICAL UNIVERSAL",,"Landis","Type
F",,"Good","Yes",," Landis Type F
","G4800",$139500.00,"0","Yes","1",,,,,"Swing","Centers","Table","Grind
Wheel","Work Wheel"

8192,"GRINDERS, CYLINDRICAL UNIVERSAL","2000","SMTW","H147",,"Very
Good","Yes",,"2000 SMTW H147
","G4800",$139500.00,"0","Yes","1",,,,,"Swing","Centers","Table","Grind
Wheel","Work Wheel"

8247,"GRINDERS, CYLINDRICAL UNIVERSAL","1983","Tos","BU 28-1000",,"Very
Good","Yes",,"1983 Tos BU 28-1000
","G4800",$26500.00,"0","Yes","1",,,,,"Swing","Centers","Table","Grind
Wheel","Work Wheel"

9732,"GRINDERS, CYLINDRICAL UNIVERSAL",,"Tos","BUH 5A /
2000",,"Good","Yes",," Tos BUH 5A / 2000
","G4800",,"0","Yes","19.6""","78.6""",,"19.6"" x 2.35"" x
12""",,"Swing","Centers","Table","Grind Wheel","Work Wheel"

8190,"GRINDERS, CYLINDRICAL UNIVERSAL","1988","Tos","BUT 63 /
3000",,"Good","Yes",,"1988 Tos BUT 63 / 3000
","G4800",$83000.00,"0","Yes","1",,,,,"Swing","Centers","Table","Grind
Wheel","Work Wheel"

10548,"GRINDERS, CYLINDRICAL UNIVERSAL","1997","Toyoda","GUP32",,"Very
Good","Yes","12.6"" Swg., 39.37"" BC, 14"" x 2"" x 5"" Wheel, 5 HP, 8""
6-Jaw Chuck, Transformer, Wheel Dresser","1997 Toyoda GUP32
","G4800",$22500.00,"0","Yes","12.59""","100""","9"" x 100""","14"" x
2"" x 5""",,"Swing","Centers","Table","Grind Wheel","Work Wheel"

8191,"GRINDERS, CYLINDRICAL UNIVERSAL","1988","WMW","SA6 x
3000",,"Good","Yes",,"1988 WMW SA6 x 3000
","G4800",$89500.00,"0","Yes","1",,,,,"Swing","Centers","Table","Grind
Wheel","Work Wheel"

9050,"GRINDERS, CYLINDRICAL, NC and
CNC","1992","Okuma","GA-44","OSP-5020G","Good","No",,"1992 Okuma GA-44
OSP-5020G","G4601",$52000.00,"-1","Yes","1",,,,,"Max.
Dia.","Length","Travels","RPM","HP"

10031,"GRINDERS, CYLINDRICAL, PLAIN (Angle head)
CNC","1999","Mitsubishi","RD-32B 50P","Fanuc 18T","Good","Yes",,"1999
Mitsubishi RD-32B 50P Fanuc
18T","G4765",$39500.00,"0","Yes","1",,,,,"Swing","Max.
Length","Wheel","Wheelhead Speed","Workhead Speed"

9884,"GRINDERS, CYLINDRICAL, PLAIN (Angle head)
CNC","2003","Mitsubishi","PD-32B 50A","Fanuc 21iT","Very
Good","Yes",,"2003 Mitsubishi PD-32B 50A Fanuc
21iT","G4765",$82500.00,"0","Yes","1",,,,,"Swing","Max.
Length","Wheel","Wheelhead Speed","Workhead Speed"

9885,"GRINDERS, CYLINDRICAL, PLAIN (Angle head)
CNC","2002","Mitsubishi","RB-32B 50A","Fanuc 16G","Good","Yes",,"2002
Mitsubishi RB-32B 50A Fanuc
16G","G4765",$43000.00,"0","Yes","1",,,,,"Swing","Max.
Length","Wheel","Wheelhead Speed","Workhead Speed"

10609,"GRINDERS, CYLINDRICAL_UNIVERSAL, NC and
CNC","2006","Okamoto","OGM-12 60 PB","Fanuc
Powermate-G","Excellent","Yes",,"2006 Okamoto OGM-12 60 PB Fanuc
Powermate-G","G4820",$79500.00,"0","Yes","12.59""","60""","18"" x
84""","16"" x 2"" x 5""","500","Swing","Centers","Table","Wheel","Work
Head Speed"

9004,"GRINDERS, CYLINDRICAL_UNIVERSAL, NC and
CNC","1999","Toyoda","GU4-100","Toyoda","Good","Yes",,"1999 Toyoda
GU4-100
Toyoda","G4820",$79500.00,"0","Yes","1",,,,,"Swing","Centers","Table","Wheel","Work
Head Speed"

10349,"GRINDERS, JIG, NC and CNC","2000","Hauser","S55-400","Fanuc
16M","Very Good","Yes",,"2000 Hauser S55-400 Fanuc
16M","G6720",$625000.00,"0","Yes","1",,,,,"Table","Travels","Max.
Dia.","RPM","HP"

9812,"GRINDERS, JIG, NC and
CNC","19??","Moore","#1",,"Good","Yes",,"19?? Moore #1
","G6720",$3000.00,"-1","Yes","1",,,,,"Table","Travels","Max.
Dia.","RPM","HP"

9008,"GRINDERS, JIG, NC and CNC","1997","Moore","#3","Fagor 8030","Very
Good","Yes",,"1997 Moore #3 Fagor
8030","G6720",$56500.00,"0","Yes","1",,,,,"Table","Travels","Max.
Dia.","RPM","HP"

8803,"GRINDERS, ROLL",,"Cincinnati","36"" x 240""",,"Good","Yes",,"
Cincinnati 36"" x 240""
","G7426",$150000.00,"0","Yes","1",,,,,"Dia.","Grind Wheel","Bed","HP",

8224,"GRINDERS, SURFACE, RECIP. TABLE, (Horizontal Spdl), NC and
CNC","2000","K.O. Lee","S1024523","Leematic","Very Good","No","24"" x
10"" Table, 28"" x 11 3/4"" Travels, 5 HP, 1,900 RPM, Leematic
Programmable Control, Table Speed Flow Control Valves, Spindle RPM and
Load Indicator, Separate Coolant Tank and Pump, Magnetic Chuck","2000
K.O. Lee S1024523 Leematic","G8030",$14000.00,"-1","Yes","1",,,,,"Length
x Width","Under Wheel","Travels","Wheel Dia.","HP"

7837,"GRINDERS, SURFACE, RECIP. TABLE, (Horizontal Spdl), NC and
CNC","2003","Tru Tech","TT-8000","Tru Tech","Like New","Yes","18"" x 6""
Chuck, 12"" x 6"" Travels, 3 HP, Pentium IV Computer, Pick-N-Place
Talking Software With Built-In Program Self-Training, Fully Programmable
Variable Speed Workhead, Diamond Grinding Wheel, Mounted and Balanced on
Flange, Wheel Dressing Attachment, Balancing Arbor, Coolant Tank With
Filter System and Hoses, 3"" Ultra-Precision Grinding Unit, Through Feed
Attachment For Centerless Grinding Work, Multiple Plunge, OD, ID, And
Contour Grinding Capabilities, Mist Buster 500","2003 Tru Tech TT-8000
Tru Tech","G8030",$58000.00,"-1","Yes","1",,,,,"Length x Width","Under
Wheel","Travels","Wheel Dia.","HP"

9718,"GRINDERS, SURFACE, RECIPROCATING TABLE,
HORZ.","2004","Chevalier","24"" x 60""",,"Very Good",,,"2004 Chevalier
24"" x 60"" ","G8025",$59500.00,"0","Yes","24"" x 60""","24""","60"" x
24""","16""","15","Table","U/W","Travels","Grind Wheel","HP"

9961,"GRINDERS, SURFACE, RECIPROCATING TABLE,
HORZ.","1995","Chevalier","Super 818",,"Very Good","Yes",,"1995
Chevalier Super 818 ","G8025",$7000.00,"-1","Yes","8"" x
18""","12""","18"" x 8""","8""","2","Table","U/W","Travels","Grind
Wheel","HP"

9719,"GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ.","1945","Gallmeyer
and Livingston","Model F",,"Good","Yes",,"1945 Gallmeyer and Livingston
Model F ","G8025",$26500.00,"0","Yes","24"" x 96""","25""","96"" x
30""","20""","30","Table","U/W","Travels","Grind Wheel","HP"

9766,"GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ.","1977","Harig","612
Super",,"Very Good","Ye","12"" x 6"" Chuck, 13 1/2"" X Travel, 7"" Y
Travel, 1 1/2 HP, 3,450 RPM, Power Longitudinal & Cross Feed, Coolant
System, Walker Elector Magnetic Chuck, Fine Feed Adjust For Cross and
Down Feed, New Crossfeed Screw","1977 Harig 612 Super
","G8025",$2400.00,"-1","Yes","1","10""","13 1/2"" x 7""","7""","1
1/2","Table","U/W","Travels","Grind Wheel","HP"

9717,"GRINDERS, SURFACE, RECIPROCATING TABLE,
HORZ.","1974","Mattison","24"" x 72""",,"Very Good","Yes",,"1974
Mattison 24"" x 72"" ","G8025",$39500.00,"0","Yes","24""x
72""","20""","84"" x 36""","20""","30","Table","U/W","Travels","Grind
Wheel","HP"

9720,"GRINDERS, SURFACE, RECIPROCATING TABLE,
HORZ.","1980","Mattison","Model 24",,"Good",,,"1980 Mattison Model 24
","G8025",,"0","Yes","24"" x 48""","18""","48"" x
24""","28""","15","Table","U/W","Travels","Grind Wheel","HP"

8963,"GRINDERS, SURFACE, RECIPROCATING TABLE,
HORZ.","2000","Okamoto","ACC-1632 ST",,"Good","Yes","32"" x 16"" Chuck,
37.5"" x 17.5"" Travels, 3 HP, Hydraulic Over The Wheel Dresser,
Incremental Downfeed, Walker Fine Line Chuck, Many Extras","2000 Okamoto
ACC-1632 ST ","G8025",$22500.00,"0","Yes","1","21.5""","37.4"" x
17.3""","12""","5","Table","U/W","Travels","Grind Wheel","HP"

8602,"GRINDERS, SURFACE, RECIPROCATING TABLE,
HORZ.","1992","Okamoto","ACC-124N",,"Good","Yes",,"1992 Okamoto ACC-124N
","G8025",$12000.00,"0","Yes","1","13""","29.5"" x
13.6""","12""","5","Table","U/W","Travels","Grind Wheel","HP"

9270,"GRINDERS, SURFACE, RECIPROCATING TABLE,
HORZ.","1999","Okamoto","820A",,"Very Good","Yes","18"" x 8"" Walker
Magnetic Chuck, 18"" Under Wheel, 20"" x 8"" Travels, 1 1/3 HP, Two (2)
Axis DRO, Fine Cross and Vertical Feeds, Power Elevation, External
Coolant Pump and Tank","1999 Okamoto 820A
","G8025",$12000.00,"-1","Yes","1","18""","23"" x 13""","8""","1
1/3","Table","U/W","Travels","Grind Wheel","HP"

9007,"GRINDERS, SURFACE, RECIPROCATING TABLE,
HORZ.","1995","Okamoto","2040 EX",,"Good","Yes",,"1995 Okamoto 2040 EX
","G8025",$54000.00,"0","Yes","1","21.5""","45.3"" x
18.2""","12""","5","Table","U/W","Travels","Grind Wheel","HP"

9831,"LATHES, CNC, 4-AXIS, UNIVERSAL","1982","Okuma","LC-40 2ST /
250","OSP-3000L","Good","Yes",,"1982 Okuma LC-40 2ST / 250
OSP-3000L","L21504",$14500.00,"0","Yes","23.62""","11.80"" x
21.65""","2,500","3""","20","Swing","Travels","RPM","Bar
Cap.","Stations"

9798,"LATHES, CNC, 4-AXIS,
UNIVERSAL","1991","Okuma","LR-15","OSP-5020L","Very Good","Yes",,"1991
Okuma LR-15 OSP-5020L","L21504",$15500.00,"0","Yes","17.72""","8.5"" x
23.62""","3,800","2.75""","18","Swing","Travels","RPM","Bar
Cap.","Stations"

9743,"LATHES, CNC, 4-AXIS,
UNIVERSAL","1990","Okuma","LR-15","OSP-5020L","Good","No",,"1990 Okuma
LR-15 OSP-5020L","L21504",,"-1","On Way","17.72""","8.5"" x
23.62""","3,800","2.75""","18","Swing","Travels","RPM","Bar
Cap.","Stations"

8633,"LATHES, CNC, 4-AXIS, W-MILLING","2006","Amera-Seiki","TS-52
MC","Mitsubishi 64S","Demo","Yes",,"2006 Amera-Seiki TS-52 MC Mitsubishi
64S","L21254M",$75500.00,"-1","Yes","12.59""","5.65"" x
14.3""","4,000","2.05""","13","Swing","Travels","RPM","Bar
Cap.","Stations"

9737,"LATHES, CNC, 4-AXIS, W-MILLING","1997","Mori-Seiki","ZL-25 MC /
1000","Fanuc MSG-501","Good","Yes",,"1997 Mori-Seiki ZL-25 MC / 1000
Fanuc MSG-501","L21254M",$73000.00,"0","Yes","20.47""","11.3"" x
42.9""","3,500","2.8""","20","Swing","Travels","RPM","Bar
Cap.","Stations"

9677,"LATHES, CNC, 4-AXIS, W-MILLING","1991","Okuma","LC-40M
Simulturn","OSP-5020L","Very Good","Yes",,"1991 Okuma LC-40M Simulturn
OSP-5020L","L21254M",$24000.00,"0","Yes","23.62""","11.22"" x
21.65""","2,500","2.75""","20","Swing","Travels","RPM","Bar
Cap.","Stations"

8561,"LATHES, CNC, 4-AXIS, W-MILLING","1988","Okuma","LC-40M
Simulturn","OSP-5000LG","Very Good","Yes",,"1988 Okuma LC-40M Simulturn
OSP-5000LG","L21254M",$22500.00,"0","Yes","23.62""","11.22"" x
41.34""","2,500","2.87""","20","Swing","Travels","RPM","Bar
Cap.","Stations"

10130,"LATHES, CNC, 4-AXIS, W-MILLING and
SUB-SPINDLE","2005","Daewoo","Puma-TT-2000 SY","Fanuc 18iTB","Very
Good","Yes",,"2005 Daewoo Puma-TT-2000 SY Fanuc
18iTB","L21254MS",$189000.00,"0","Yes","31.5""","10"" x
31.5""","5,000","2.6""","24","Swing","Travels","RPM","Bar
Cap.","Stations"

10573,"LATHES, CNC, 4-AXIS, W-MILLING and
SUB-SPINDLE","2004","Daewoo","Puma-TT-2000 SY","Fanuc
18iT","Good","Yes",,"2004 Daewoo Puma-TT-2000 SY Fanuc
18iT","L21254MS",$138500.00,"0","Yes","31.5""","10"" x
31.5""","5,000","2.6""","24","Swing","Travels","RPM","Bar
Cap.","Stations"

10537,"LATHES, CNC, 4-AXIS, W-MILLING and
SUB-SPINDLE","2010","Doosan","Puma-TT-1800 SY","Fanuc 31iT","Very
Good","Yes",,"2010 Doosan Puma-TT-1800 SY Fanuc
31iT","L21254MS",$269900.00,"0","Yes","20.6""","6.5"" x 27.5"" x
3.9""","4,000","2.6""","24","Swing","Travels","RPM","Bar
Cap.","Stations"

8266,"LATHES, CNC, 4-AXIS, W-MILLING and
SUB-SPINDLE","2002","Doosan","Z340SM","Fanuc 18iTB","Like
New","Yes",,"2002 Doosan Z340SM Fanuc
18iTB","L21254MS",$125000.00,"-1","Yes","26.77""","7.28"" x
25.59""","5,000","2.44""","24","Swing","Travels","RPM","Bar
Cap.","Stations"

9450,"LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE","2000","Emco
Maier","Emco-Turn 332","Siemens 840D","Very Good","No","16.92"" Swing,
11.42"" SOC, 8.66"" Max. Cut Dia., 18.99"" Max. Cut Length, 8,000 RPM, 2
- 12 Sta. Turrets, 17 HP Main, 13 HP Sub., 16C Collet Chuck on Main and
Sub Spindle, Coolant Through Sub-Spindle, Parts Catcher, Bar Feed
Interface, Live Tooling, LNS Quick Load Servo 2 Bar Feed, Parts Ejector
on Sub-Spindle, Mist / Oil Collector, High Pressure Coolant, Live and
Standard Tool Holders","2000 Emco Maier Emco-Turn 332 Siemens
840D","L21254MS",$60000.00,"-1","Yes","16.92""","6.299"" x
20.07""","8,000","1.25""","24","Swing","Travels","RPM","Bar
Cap.","Stations"

8521,"LATHES, CNC, 4-AXIS, W-MILLING and
SUB-SPINDLE","2001","Graziano","Twin 70Y","Fanuc 18iT","Very
Good","Yes",,"2001 Graziano Twin 70Y Fanuc
18iT","L21254MS",$159900.00,"0","Yes","18.9""","20.66"" x 7.086"" x
2.5""","5,000","2.5""","24","Swing","Travels","RPM","Bar
Cap.","Stations"

10425,"LATHES, CNC, 4-AXIS, W-MILLING and
SUB-SPINDLE","2000","Mori-Seiki","ZL-200 SMC","Mitsubishi MSC-501
(18iTA)","Good","Yes","26.8"" Swing, 20.1"" SOC, 16.7"" Turning Length,
4,000 RPM, 20 HP, Sub-Spindle, Two Turrets, Live Tooling, Full C-Axis
for Main and Sub-Spindle, Overhead in Machine Auto Parts Catcher, Chip
Conveyor","2000 Mori-Seiki ZL-200 SMC Mitsubishi MSC-501
(18iTA)","L21254MS",$139500.00,"0","Yes","26.77""","9.3"" x
20.5""","4,000","2.56","20","Swing","Travels","RPM","Bar
Cap.","Stations"

9746,"LATHES, CNC, 4-AXIS, W-MILLING and
SUB-SPINDLE","2006","Mori-Seiki","NT-3150 / 1000 SZ DCG","Mori-Seiki
MSX-711 T3","Very Good","Yes",,"2006 Mori-Seiki NT-3150 / 1000 SZ DCG
Mori-Seiki MSX-711 T3","L21254MS",$275000.00,"0","On
Way","23.60""","27"" x
42.3""","6,000","2""","40","Swing","Travels","RPM","Bar Cap.","Stations"

10552,"LATHES, CNC, 4-AXIS, W-MILLING and
SUB-SPINDLE","2001","Nakamura-Tome","WT-150 MMY","Fanuc 18iT","Very
Good","Yes","Swing 10"", Swing Over C.S. 7.48"", Maximum Turning
Diameter 7.48"", Length 15.7"", Y-Axis, 5,000 RPM, 14 HP, 2 - 12 Sta.
Turrets, Sub Spindle, Full C-Axis, Collet Chuck Main Spindle, 6"" 3-Jaw
Sub Spindle, Chip Conveyor, Parts Catcher, LNS 550 Sprigazine Bar Feed,
High Pressure Coolant","2001 Nakamura-Tome WT-150 MMY Fanuc
18iT","L21254MS",$279500.00,"0","Yes","10""","6.2"" x
18.3""","5,000","2.5""","12 / 12","Swing","Travels","RPM","Bar
Cap.","Stations"

10544,"LATHES, CNC, 4-AXIS, W-SUB-SPINDLE","1996","Okuma","LR-15
W","OSP-5020L","Good","Yes",,"1996 Okuma LR-15 W
OSP-5020L","L21254S",$28000.00,"0","Yes","17.72""","8.5"" x
23.62""","3,800","2.56""","10 / 8","Swing","Travels","RPM","Bar
Cap.","Stations"

10042,"LATHES, CNC, 6-AXIS, W-MILLING and
SUB-SPINDLE","2005","Daewoo","Puma-2000 SLYGL","Fanuc 18iT","Very
Good","Yes",,"2005 Daewoo Puma-2000 SLYGL Fanuc
18iT","L21256MS",$140000.00,"0","Yes","23.622""","10"" x 32.6"" x
3.94""","4,500","2.625""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10612,"LATHES, CNC, 6-AXIS, W-MILLING and
SUB-SPINDLE","2005","Doosan","Puma MX-2500 ST","Fanuc 18iTB","Very
Good","Yes",,"2005 Doosan Puma MX-2500 ST Fanuc
18iTB","L21256MS",$179900.00,"0","On Way","29.5""","21.85"" x 43.1"" x
6.3""","5,000","3.5""","40 ATC / 12","Swing","Travels","RPM","Bar
Cap.","Stations"

8890,"LATHES, CNC, 6-AXIS, W-MILLING and
SUB-SPINDLE","1998","Mori-Seiki","SL-250 B SMC / 1000","Mitsubishi
MSC-501 (Fanuc 18T)","Very Good","Yes",,"1998 Mori-Seiki SL-250 B SMC /
1000 Mitsubishi MSC-501 (Fanuc
18T)","L21256MS",$64500.00,"0","Yes","26.8""","9.3"" x
39.37""","3,500","2.87""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

9485,"LATHES, CNC, 6-AXIS, W-MILLING and
SUB-SPINDLE","1995","Okuma","LT-15 M","OSP-7000L","Very
Good","Yes",,"1995 Okuma LT-15 M
OSP-7000L","L21256MS",$59500.00,"0","Yes","21.65""","7.1"" x
18.1""","3,800","2.75""","24","Swing","Travels","RPM","Bar
Cap.","Stations"

10451,"LATHES, CNC, 6-AXIS, W-MILLING and
SUB-SPINDLE","1999","Okuma","LT-15 M BB","OSP U100L","Very
Good","Yes",,"1999 Okuma LT-15 M BB OSP
U100L","L21256MS",$89900.00,"0","Yes","21.65""","7.56"" x 27.56""
x","6,000","1""","24","Swing","Travels","RPM","Bar Cap.","Stations"

9664,"LATHES, CNC, 6-AXIS, W-MILLING and
SUB-SPINDLE","1996","Okuma","LT-15 M BB","OSP-7000L","Good","Yes",,"1996
Okuma LT-15 M BB
OSP-7000L","L21256MS",$62500.00,"0","Yes","21.65""","7.56"" x
27.56""","3,800","2.75""","24","Swing","Travels","RPM","Bar
Cap.","Stations"

8436,"LATHES, CNC, GANG STYLE","1996","Amera-Seiki","GT-32","Fanuc
OTC","Good","Yes","14.3"" Swing, 10.8"" OCS, 4"" Turning Dia., 11.8""
Turn Length, 1.57"" Spindle Bore, 10 HP, 12"" x 20.8"" Gang Slide, 16C
Collet Closure","1996 Amera-Seiki GT-32 Fanuc
OTC","L2125G",$18500.00,"-1","Yes","14.3""","11.81"" x
9.45""","6,000","1.26""",,"Swing","Travels","RPM","Bar Cap.","Stations"

7297,"LATHES, CNC, GANG STYLE","1997","Mazak","Quick
Turn-6G",,"Good","Yes",,"1997 Mazak Quick Turn-6G
","l2125g",$26000.00,"-1","Yes","18.5""","11.81"" x
9.45""","7,000","1.26""","6","Swing","Travels","RPM","Bar
Cap.","Stations"

8694,"LATHES, CNC, GANG STYLE","1999","Wasino","G-6","Fanuc
21iT","Good","Yes","15.75"" Swing, 6,000 RPM, 5.5 HP, 8 Sta. Slide,
Tailstock, 5C Collet Chuck, Intergrated Robot Load / Unload Gantry
System, Tool Setter, Parts Stacker","1999 Wasino G-6 Fanuc
21iT","L2125G",$26000.00,"-1","Yes","15.75""","11.81"" x
11.25""","6,000","1.5""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

10318,"LATHES, CNC, OPPOSING SPINDLES
W-MILLING","1995","Mazak","Multiplex 630 M","Mazatrol T-Plus","Very
Good","Yes",,"1995 Mazak Multiplex 630 M Mazatrol
T-Plus","L2125TM",$89500.00,"0","Yes","22.04""","12.20"" x
23.80""","3,500","2""","24","Swing","Travels","RPM","Bar
Cap.","Stations"

9795,"LATHES, CNC, OPPOSING SPINDLES
W-MILLING","1996","Okuma","LT-25","OSP-7000L","Good","Yes",,"1996 Okuma
LT-25 OSP-7000L","L2125TM",$62500.00,"0","Yes","19.67""","10.24"" x
22.05""","3,500","2.75""","24","Swing","Travels","RPM","Bar
Cap.","Stations"

10371,"LATHES, ENGINE","1968","American","Maxi-Swing
70/50",,"Good","Yes",,"1968 American Maxi-Swing 70/50
","L3000",$159500.00,"0","Yes","74.5""","239""","250","2
7/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

10171,"LATHES, ENGINE","1987","American","64"" x
498""",,"Good","Yes",,"1987 American 64"" x 498""
","L3000",$132500.00,"0","Yes","64""","498""","157","2
1/2""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

10198,"LATHES, ENGINE","1953","American","64"" x
498""",,"Good","Yes",,"1953 American 64"" x 498""
","L3000",$129500.00,"0","Yes","64""","498""","157","2
1/2""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

7590,"LATHES, ENGINE",,"American","44"" x 276""",,"Good","Yes",,"
American 44"" x 276""
","L3000",$32000.00,"0","Yes","44.5""","56""","157",,"Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

9870,"LATHES, ENGINE",,"American","44"" x 156""",,"Good","Yes",,"
American 44"" x 156""
","L3000",$24500.00,"0","Yes","44""","156""","260","2
7/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

9189,"LATHES, ENGINE",,"Axelson","18"" x 30""",,"Very Good","Yes",,"
Axelson 18"" x 30""
","L3000",$8600.00,"0","Yes","18.5""","30""","1,127","1
9/16""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

10199,"LATHES, ENGINE",,"Bertram","75"" x 360""",,"Good","Yes",,"
Bertram 75"" x 360""
","L3000",$149500.00,"0","Yes","75""","360""","101","1
3/4""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

9879,"LATHES, ENGINE",,"Betts","84""x 156""",,"Very Good","Yes",," Betts
84""x 156"" ","L3000",$59500.00,"0","Yes","86""","156""","63","2
1/2""","No","Swing","Centers","RPM","Bar Cap.","Threading"

9165,"LATHES, ENGINE","1964","Cincinnati","19"" x
30""",,"Good","Yes",,"1964 Cincinnati 19"" x 30""
","L3000",$5950.00,"0","Yes","19""","30""","1,500","1
5/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

7383,"LATHES, ENGINE","1996","Clausing-Colchester","Mastiff GH",,"Very
Good","Yes",,"1996 Clausing-Colchester Mastiff GH
","L3000",$21500.00,"0","Yes","21.8""","80""","1,400","3
1/2""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

10290,"LATHES, ENGINE","1979","Clausing-Colchester","21"" x 120""
8100",,"Good","Yes","21"" Swg, 35"" Swg. In Gap, 100"" Centers, 1,400
RPM, 15 HP, 3 & 4 Jaw Chucks, Taper Attachement, Many Extras","1979
Clausing-Colchester 21"" x 120"" 8100
","L3000",$16500.00,"-1","Yes","21""","120""","1,400","3
1/2""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

9161,"LATHES, ENGINE","1987","Clausing-Colchester","15"" x
50""",,"Good","Yes",,"1987 Clausing-Colchester 15"" x 50""
","L3000",$5950.00,"0","Yes","15""","50""","2,000","1
3/4""","No","Swing","Centers","RPM","Bar Cap.","Threading"

7430,"LATHES, ENGINE","1952","Clovis","43"" x
240""",,"Good","Yes",,"1952 Clovis 43"" x 240""
","L3000",$24500.00,"0","Yes","43""","240""","520","3.5""","Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

7980,"LATHES, ENGINE",,"Craven","112"" x 312""",,"Good","Yes",," Craven
112"" x 312"" ","L3000",$225000.00,"0","Yes","112""","312""","36","1
3/4""","No","Swing","Centers","RPM","Bar Cap.","Threading"

10570,"MACHINING CENTERS, VERTICAL, CNC","2000","Haas","VF-3","Haas 32
BIT","Very Good","Yes",,"2000 Haas VF-3 Haas 32
BIT","M0185",$42500.00,"0","Yes","48"" x 18""","40"" x 20"" x
25""","7,500","40","21","Table","Travels","RPM","Taper","ATC"

10578,"MACHINING CENTERS, VERTICAL, CNC","2003","Haas","VF-6/40","Haas
32 BIT","Very Good","Yes",,"2003 Haas VF-6/40 Haas 32
BIT","M0185",$89500.00,"0","Yes","64"" x 38""","64"" x 32"" x
30""","10,000","40","24","Table","Travels","RPM","Taper","ATC"

10591,"MACHINING CENTERS, VERTICAL, CNC","2005","Haas","VF-5/40","Haas
32 BIT","Very Good","Yes",,"2005 Haas VF-5/40 Haas 32
BIT","M0185",$89900.00,"0","Yes","52"" x 23""","50"" x 26"" x
25""","10,000","40","40","Table","Travels","RPM","Taper","ATC"

10619,"MACHINING CENTERS, VERTICAL, CNC","2005","Haas","VF-1","Haas 32
BIT","Very Good","Yes",,"2005 Haas VF-1 Haas 32
BIT","M0185",$52000.00,"0","Yes","26"" x 14""","20"" x 16"" x
20""","7,500","40","20","Table","Travels","RPM","Taper","ATC"

9039,"MACHINING CENTERS, VERTICAL, CNC","2003","Haas","VF-4","Haas 32
BIT","Good","Yes",,"2003 Haas VF-4 Haas 32
BIT","M0185",$48900.00,"0","Yes","52"" x 18""","50"" x 20"" x
25""","7,500","40","25","Table","Travels","RPM","Taper","ATC"

10590,"MACHINING CENTERS, VERTICAL, CNC","2003","Haas","Mini-Mill","Haas
32 BIT","Very Good","Yes",,"2003 Haas Mini-Mill Haas 32
BIT","M0185",$23500.00,"0","Yes"," 28.75"" x 12""","16"" x 12"" x
10""","6,000","40","10","Table","Travels","RPM","Taper","ATC"

9061,"MACHINING CENTERS, VERTICAL, CNC","2001","Haas","VF-4","Haas 32
BIT","Very Good","Yes","52"" x 18"" Table, 50"" x 20"" x 25"" Travels,
7,500 RPM, 20 HP, 24 ATC, 4th Axis Interface, Remote Jog Handle, 3.5""
Floppy Drive, Programmable Coolant, Remote Jog Handle, 1 MB Memory,
Spindle Orientation, Coordinate Rotation and Scaling","2001 Haas VF-4
Haas 32 BIT","M0185",$39900.00,"0","Yes","52"" x 18""","50"" x 20"" x
25""","7,500","40","21","Table","Travels","RPM","Taper","ATC"

10600,"MACHINING CENTERS, VERTICAL, CNC","2004","Haas","TM-2","Haas 32
BIT","Very Good","Yes",,"2004 Haas TM-2 Haas 32
BIT","M0185",$29500.00,"0","Yes","57.75"" x 10.5""","40"" x 16"" x
16""","4,000","40","10","Table","Travels","RPM","Taper","ATC"

10540,"MACHINING CENTERS, VERTICAL, CNC","2005","Haas","VF-3 SS
YT","Haas 32 BIT","Very Good","Yes","54"" x 25"" Table, 40"" x 26"" x
25"" Travels, 12,000 RPM, 40 Tpaer 30 HP, 24 ATC, 1,400 IPM, Chip Auger,
Programmable Coolant Nozzle, 4th Axis Ready, 16MB Expanded Memory,
Visual Quick Code, High Speed Machining Look Ahead, Coolant Through
Spindle (300 psi) With Auxiliary Coolant Filter System, Renishaw
Wireless Intuitive Probing and Toolpresetting System, Remote Jog
Handle","2005 Haas VF-3 SS YT Haas 32
BIT","M0185",$84500.00,"0","Yes","54"" x 25""","40"" x 26"" x
25""","12,000","40","24","Table","Travels","RPM","Taper","ATC"

10322,"MACHINING CENTERS, VERTICAL,
CNC","2006","Hardinge","VMC-1000XP-3","Fanuc
18iMB","Exceelent","Yes",,"2006 Hardinge VMC-1000XP-3 Fanuc
18iMB","M0185",$95000.00,"0","Yes","47"" x 24""","40"" x 24"" x
24""","12,000","40","30","Table","Travels","RPM","Taper","ATC"

10242,"MACHINING CENTERS, VERTICAL, CNC","2004","Hardinge","VMC-1000
II","Fanuc OMD","Very Good","Yes",,"2004 Hardinge VMC-1000 II Fanuc
OMD","M0185",$42000.00,"0","Yes","44"" x 20""","40.16"" x 20.08"" x
20.08""","8,000","40","20","Table","Travels","RPM","Taper","ATC"

10243,"MACHINING CENTERS, VERTICAL, CNC","2000","Hardinge","VMC-1000
II","Fanuc OMD","Very Good","Yes",,"2000 Hardinge VMC-1000 II Fanuc
OMD","M0185",$29500.00,"0","Yes","44"" x 20""","40.16"" x 20.08"" x
20.08""","8,000","40","20","Table","Travels","RPM","Taper","ATC"

10244,"MACHINING CENTERS, VERTICAL,
CNC","1998","Hardinge","VMC-1000","Fanuc OMD","Very Good","Yes",,"1998
Hardinge VMC-1000 Fanuc OMD","M0185",$29500.00,"0","Yes","44"" x
20""","40.16"" x 20.08"" x
20.08""","8,000","40","20","Table","Travels","RPM","Taper","ATC"

9434,"MACHINING CENTERS, VERTICAL,
CNC","2001","Hurco","VMX-50","Ultramax IV/Dual CRT","Very
Good","Yes","59"" x 26"" Table, 50"" x 26"" x 24"" Travels, 12,000
RPM's, 50 Taper, 30 HP, 30 ATC, Conversational Programming, Dual Screen
Control, Chip Conveyor","2001 Hurco VMX-50 Ultramax IV/Dual
CRT","M0185",$59900.00,"-1","Yes","59"" x 26""","50"" x 26"" x
24""","12,000","50","30","Table","Travels","RPM","Taper","ATC"

10164,"MACHINING CENTERS, VERTICAL, CNC","1993","Hurco","Spirit 40
SLV","Fidia PC Base","Good","Yes","47.2"" x 19.7"" Table, 6,000 RPM, 15
HP, 24 ATC, Linear Guides, Full Enclosure","1993 Hurco Spirit 40 SLV
Fidia PC Base","M0185",$12000.00,"-1","Yes","47.2"" x 19.7""","40"" x
20"" x 25""","6,000","40","24","Table","Travels","RPM","Taper","ATC"

9435,"MACHINING CENTERS, VERTICAL, CNC","1998","Hurco","BMC-4020
HT","Ultramax SSM","Very Good","Yes","47"" x 19.7"" Table, 40"" x 20"" x
24"" Travels, 8,000 RPM's, 40 Taper, 20 HP, 24 ATC, Rigid Tapping,
RS-232 Port","1998 Hurco BMC-4020 HT Ultramax
SSM","M0185",$32000.00,"-1","Yes","47"" x 19.7""","40"" x 20"" x
24""","8,000","40","24","Table","Travels","RPM","Taper","ATC"

10114,"MACHINING CENTERS, VERTICAL, CNC","1994","Hurco","BMC-30","Delta
Dynapath 10","Very Good","Yes","47.2"" x 25.2"" Table, 30"" x 18"" x
20"" Travels, 8,000 RPM, 40 Taper, 15 HP, 24 ATC, RS-232 Port, 3D Eprom
Software, Coolant System, Rigid Tapping","1994 Hurco BMC-30 Delta
Dynapath 10","M0185",$32500.00,"-1","Yes","47.2"" x 25.2""","30"" x 18""
x 20""","8,000","40","24","Table","Travels","RPM","Taper","ATC"

9809,"MACHINING CENTERS, VERTICAL,
CNC","1994","Hurco","BMC-30","Ultramax II/Dual CRT","Needs
Repair","Yes",,"1994 Hurco BMC-30 Ultramax II/Dual
CRT","M0185",$16500.00,"-1","Yes","47.2"" x 25.2""","30"" x 20"" x
20""","8,000","40","24","Table","Travels","RPM","Taper","ATC"

9151,"MACHINING CENTERS, VERTICAL, CNC","1991","Ikegai","TV-4","Fanuc
OM","Good","Yes",,"1991 Ikegai TV-4 Fanuc
OM","M0185",$12000.00,"-1","Yes","27.5"" x 16.5""","22"" x 16.125"" x
15.75""","6,000","40","20","Table","Travels","RPM","Taper","ATC"

10611,"MACHINING CENTERS, VERTICAL,
CNC","1997","Johnford","VMC-2024","Fanuc OM","Very Good","Yes",,"1997
Johnford VMC-2024 Fanuc OM","M0185",$69500.00,"0","Yes","82.9"" x
34""","80.7"" x 35.4"" x
28""","6,000","40","24","Table","Travels","RPM","Taper","ATC"

10025,"MACHINING CENTERS, VERTICAL,
CNC","1996","Johnford","VMC-2020","Fanuc OM","Good","Yes",,"1996
Johnford VMC-2020 Fanuc OM","M0185",$79500.00,"0","Yes","82.9"" x
34""","80.7"" x 35.4"" x
28""","6,000","50","20","Table","Travels","RPM","Taper","ATC"

10547,"MACHINING CENTERS, VERTICAL, CNC","1990","Kia","VA-50","Fanuc
10M","Very Good","Yes",,"1990 Kia VA-50 Fanuc
10M","M0185",$33000.00,"0","Yes","62"" x 19.5""","40"" x 20"" x
20""","3,700","50","25","Table","Travels","RPM","Taper","ATC"

7618,"MACHINING CENTERS, VERTICAL,
CNC","2001","Kingsbury","VMC-600","Fanuc 15iM","Good","Yes",,"2001
Kingsbury VMC-600 Fanuc 15iM","M0185",$72000.00,"0","Yes","60"" x
52""","60"" x 50"" x
18""","8,000","50","30","Table","Travels","RPM","Taper","ATC"

10445,"MACHINING CENTERS, VERTICAL, CNC","1998","Kitamura","Bridge
Center 8","Fanuc 15M","Good","Yes",,"1998 Kitamura Bridge Center 8 Fanuc
15M","M0185",$139500.00,"0","Yes","98.4"" x 35.4""","80"" x 42.7"" x
27.9""","6,000","50","30","Table","Travels","RPM","Taper","ATC"

9807,"MACHINING CENTERS, VERTICAL,
CNC","1989","Kitamura","Mycenter-2","Fanuc OM","Good","Yes",,"1989
Kitamura Mycenter-2 Fanuc OM","M0185",,"-1","Yes","35.4"" x
16.1""","23"" x 16.9"" x
18""","7,000","40","20","Table","Travels","RPM","Taper","ATC"

7619,"MACHINING CENTERS, VERTICAL, CNC","1998","Kitamura","Mycenter-7X /
50","Yasnac I80","Good","Yes",,"1998 Kitamura Mycenter-7X / 50 Yasnac
I80","M0185",$119750.00,"0","Yes","66.9"" x 25.6""","60.2"" x 25.6"" x
27""","5,000","50","30","Table","Travels","RPM","Taper","ATC"

9808,"MACHINING CENTERS, VERTICAL, CNC","1992","Kitamura","Mycenter-3
APC","Yasnac I80M","Good","Yes",,"1992 Kitamura Mycenter-3 APC Yasnac
I80M","M0185",$17500.00,"-1","Yes","39.37"" x 15.6""","32.90"" x 18.70""
x 18""","6,000","40","60","Table","Travels","RPM","Taper","ATC"

10219,"MACHINING CENTERS, VERTICAL,
CNC","1999","Komo","VMC-40/240","Fanuc 16MB","Very Good","Yes",,"1999
Komo VMC-40/240 Fanuc 16MB","M0185",$175000.00,"-1","On Way","280"" x
24""","242"" x 24"" x
24""","10,000","40","47","Table","Travels","RPM","Taper","ATC"

9015,"MACHINING CENTERS, VERTICAL,
CNC","1998","Leblond-Makino","SNC-64","Fanuc Pro 3 CNC","Very
Good","Yes","29.5"" x 15.7"" Table, 15,000 RPM, 40 Taper, 7.5 HP, 15
ATC, Graphite Package","1998 Leblond-Makino SNC-64 Fanuc Pro 3
CNC","M0185",$29500.00,"0","Yes","29.5"" x 15.7""","23.622"" x 15.748""
x 15.748""","15,000","40","16","Table","Travels","RPM","Taper","ATC"

9415,"MACHINING CENTERS, VERTICAL,
CNC","1993","Leblond-Makino","SNC-64","Fanuc Pro 3
CNC","Good","Yes",,"1993 Leblond-Makino SNC-64 Fanuc Pro 3
CNC","M0185",,"-1","On Way","29.5"" x 15.7""","23.622"" x 15.748"" x
15.748""","15,000","40","15","Table","Travels","RPM","Taper","ATC"

10615,"MACHINING CENTERS, VERTICAL, CNC","2005","Makino","V56","Makino
Pro 5","Excellent","Yes",,"2005 Makino V56 Makino Pro
5","M0185",$179500.00,"0","Yes","41.3"" x 21.6""","35.4"" x 21.7"" x
17.7""","30,000","HSK 63","25","Table","Travels","RPM","Taper","ATC"

9721,"GRINDERS, SURFACE, RECIPROCATING TABLE,
HORZ.","1985","Okamoto","PSG-208B",,"Very Good",,,"1985 Okamoto PSG-208B
","G8025",$57500.00,"0","Yes","32"" x 80""","29""","84.64"" x
32.67""","20""","30","Table","U/W","Travels","Grind Wheel","HP"

8854,"GRINDERS, SURFACE, ROTARY TYPE, HORIZ.
SPDL",,"Arter","A3-16",,"Good","Yes",," Arter A3-16
","G8080",$6800.00,"0","Yes","1",,,,,"Chuck Diameter","Under
Wheel","Wheel","RPM","HP"

8868,"GRINDERS, SURFACE, ROTARY TYPE, HORIZ.
SPDL","1953","Arter","D-16",,"Good","Yes",,"1953 Arter D-16
","G8080",$6500.00,"0","Yes","1",,,,,"Chuck Diameter","Under
Wheel","Wheel","RPM","HP"

8853,"GRINDERS, SURFACE, ROTARY TYPE, HORIZ.
SPDL","1967","Sundstrand","Model H",,"Good","Yes",,"1967 Sundstrand
Model H ","G8080",$18000.00,"0","Yes","1",,,,,"Chuck Diameter","Under
Wheel","Wheel","RPM","HP"

8666,"GRINDERS, SURFACE, ROTARY TYPE, VERT.
SPDL",,"Blanchard","20-36",,"Good","Yes",," Blanchard 20-36
","G8100",$14500.00,"0","Yes","1",,,,,"Table","Swing","U/W","Grind
Wheel","HP"

8670,"GRINDERS, SURFACE, ROTARY TYPE, VERT.
SPDL",,"Blanchard","18",,"Good","Yes",," Blanchard 18
","G8100",$17500.00,"0","Yes","1",,,,,"Table","Swing","U/W","Grind
Wheel","HP"

7060,"GRINDERS, SURFACE, ROTARY TYPE, VERT.
SPDL","1967","Blanchard","22K-42",,"Very Good","Yes",,"1967 Blanchard
22K-42
","G8100",$36550.00,"0","Yes","1",,,,,"Table","Swing","U/W","Grind
Wheel","HP"

8671,"GRINDERS, SURFACE, ROTARY TYPE, VERT.
SPDL",,"Blanchard","18-36",,"Good","Yes",," Blanchard 18-36
","G8100",$12500.00,"0","Yes","1",,,,,"Table","Swing","U/W","Grind
Wheel","HP"

9937,"GRINDERS, SURFACE, ROTARY TYPE, VERT.
SPDL","1954","Blanchard","20K-36",,"Good","Yes","36"" Chuck, 38"" Swing,
12 Under Wheel, 20"" Grinding Wheel, 36"" Neutrifier Magnetic Chuck
Control, Coolant System, Splash Guards","1954 Blanchard 20K-36
","G8100",$18000.00,"-1","Yes","1",,,,,"Table","Swing","U/W","Grind
Wheel","HP"

9679,"GRINDERS, SURFACE, ROTARY TYPE, VERT.
SPDL",,"Blanchard","18-36",,"Very Good","Yes",," Blanchard 18-36
","G8100",,"0","Yes","36""","39""","20""","18""","25","Table","Swing","U/W","Grind
Wheel","HP"

8667,"GRINDERS, SURFACE, ROTARY TYPE, VERT.
SPDL","1988","Elgin","36",,"Good","Yes",,"1988 Elgin 36
","G8100",$17500.00,"0","Yes","1",,,,,"Table","Swing","U/W","Grind
Wheel","HP"

8680,"GRINDERS, SURFACE, ROTARY TYPE, VERT.
SPDL",,"Lansing","32""",,"Like New","Yes",," Lansing 32""
","G8100",$38000.00,"0","Yes","1",,,,,"Table","Swing","U/W","Grind
Wheel","HP"

10159,"GRINDERS, TOOL and CUTTER, NC-CNC","2004","Anca","RGX","Anca
3DX-NT","Very Good","Yes","Max. Tool Dia. / Length - 9.8"" / 6"",
Travels - 15"" x 15.4"" x 15.4"" x 9.449"", A-Axis Length / Rotation /
Taper - 5.9"" / 180° / ISO 30, C-Axis - +/- 270°, 20,000 RPM, 11 HP,
Color Monitor with Graphics, Ethernet Port, Dual Bi-Directional
Spindles, Very Large Software Package, Forty (40) Tool Auto Loader,
Approximately One Hundred Seventy Five (175) Collets For Auto
Loader","2004 Anca RGX Anca
3DX-NT","G8507",$72000.00,"0","Yes","1",,,,,"Dia.","Length","Travels","RPM","HP"

8841,"GRINDERS, TOOL and CUTTER, NC-CNC","1998","Anca","RG-7","Anca
System 32","Very Good","Yes","Min. - Max. Tool Dia. / Length - .079 -
6"" / 13"", Travels - 13.386"" x 9.449"" x 9.449"" x 9.449"", A-Axis
Length / Rotation / Taper - 5.9"" / 360° / ISO 50, Hoffman 600 CFM Mist
Collector, PROjection Fluting, Large Selection of Tooling Including
Mandrels, Collets, Wheels, Etc, Step Tool Package, Many Other Options,
Machine Rebuilt by Anca in 2004, Not Used Since","1998 Anca RG-7 Anca
System
32","G8507",$86000.00,"-1","Yes","1",,,,,"Dia.","Length","Travels","RPM","HP"

8164,"GRINDERS, TOOL and CUTTER, NC-CNC","1994","Anca","TG-4
Fastgrind","Anca Series 2000","Good","Yes","Max. Swing 3.15"", Max.
Length 15.86"", 5,167 Spindle, Anca Series 2000 Control, Paper Coolant
Filtration System, RS-232 Port, One (1) 50 Taper Holder with 1/8 - 1""
Collets, Two (2) Wheel Arbors, Operating Only With Oil, High End
Production End Mill Software (all end mills, conical taper,
wordriff)","1994 Anca TG-4 Fastgrind Anca Series
2000","G8507",$42000.00,"-1","Yes","1",,,,,"Dia.","Length","Travels","RPM","HP"

8908,"GRINDERS, TOOL and CUTTER,
NC-CNC","1999","Sentry","TG-410","Autocon CNC","Very Good","Yes",,"1999
Sentry TG-410 Autocon CNC","G8507",$40000.00,"-1","On
Way","1",,,,,"Dia.","Length","Travels","RPM","HP"

8906,"GRINDERS, TOOL and CUTTER, NC-CNC","2005","Star","PTG-512",,"Very
Good","Yes","Max. Tool Dia. / Length - .3.937"" / 21"", Travels - 11.8""
x 8.7"" x 22"", A-Axis Rotation / Taper - 360° / ISO 50, 10,000 RPM, 30
HP, NUMROTOplus Part Probing Software, NUMROTOplus 2D Grinding
Simulation, Closed Loop Chiller on Grinding Spindle & Headstock, Glass
Scales on All Linear Axes, HSK Wheel Mounting - Too Many Option To List
- Check Out The Full Quote","2005 Star PTG-512
","G8507",$285000.00,"-1","Yes","1",,,,,"Dia.","Length","Travels","RPM","HP"

7280,"GRINDERS, TOOL and CUTTER, NC-CNC","1990","Star","ATG-6DC",,"Very
Good","Yes",,"1990 Star ATG-6DC
","G8507",$19500.00,"-1",,"1",,,,,"Dia.","Length","Travels","RPM","HP"

5967,"GRINDERS, TOOL and CUTTER, NC-CNC","1996","Unison","4000 Super
TruFlute",,"Good","No","Max. Swing 14"", Max. Length 12"", 14"" x 8"" x
13.5"" Travels, 10 HP, A & C Axis, Operating Only With Oil, Drill, End
Mill, Step Tool and Burr Software, New Spindle Installed 10/13/06","1996
Unison 4000 Super TruFlute
","G8507",$48000.00,"-1","Yes","1",,,,,"Dia.","Length","Travels","RPM","HP"

7711,"GRINDERS, TOOL and CUTTER, NC-CNC","1997","Walter","Power
Production","Walter HMC 400","Good","Yes","Maximum Tool Diameter /
Length - 12.59"" / 14.46"", Walter HMC 400 Control, Windows DOS Packages
1, Two (2) Wheel Arbors, Operating Only With Oil, Fire Supression
Equipment","1997 Walter Power Production Walter HMC
400","G8507",$70000.00,"-1","Yes","1",,,,,"Dia.","Length","Travels","RPM","HP"

10196,"GRINDERS, TOOL and CUTTER, NC-CNC","1993","Walter","Helitronic
44","Walter HMC 300","Good","Yes",,"1993 Walter Helitronic 44 Walter HMC
300","G8507",$24500.00,"0","Yes","1",,,,,"Dia.","Length","Travels","RPM","HP"

9873,"GRINDERS, TOOL and CUTTER, NC-CNC","1997","Walter","Helitronic
Power","Walter HMC 400","Very Good","Yes",,"1997 Walter Helitronic Power
Walter HMC
400","G8507",$59900.00,"0","Yes","1",,,,,"Dia.","Length","Travels","RPM","HP"

7883,"GRINDERS, TOOL and CUTTER, NC-CNC","1996","Walter","Helitronic
Power","Walter HMC 400","Good","Yes","Maximum Tool Diameter / Length -
10.25"" / 15.75"", Walter HMC 400 Control, Walter HMC 400, Software Pack
(1, 2, 3, and 4), Operating Only With Oil, Tailstock","1996 Walter
Helitronic Power Walter HMC
400","G8507",$82000.00,"-1","Yes","1",,,,,"Dia.","Length","Travels","RPM","HP"

7882,"GRINDERS, TOOL and CUTTER, NC-CNC","1996","Walter","Helitronic
Power","Walter HMC 400","Fair","Yes","Maximum Tool Diameter / Length -
10.25"" / 15.75"", Walter HMC 400 Control, Walter HMC 400, Software Pack
(1, 2, 3, and 4), Operating Only With Oil, Tailstock","1996 Walter
Helitronic Power Walter HMC
400","G8507",$82000.00,"-1","Yes","1",,,,,"Dia.","Length","Travels","RPM","HP"

9304,"INSERTION MACHINES","1992","Haeger","HP6-C",,"Good","Yes",,"1992
Haeger HP6-C
","I4775",$7000.00,"0","Yes","1",,,,,"Tons","Throat","Stroke","Daylight","HP"

8130,"IRONWORKERS","1954","Buffalo","Model 2 1/2",,"Good","Yes",,"1954
Buffalo Model 2 1/2 ","P8915",$10500.00,"0","Yes","125","1 13/16""","6""
x 6 x 1/2""","1 9/16""","10","Tons","Punch","Shear","Bar","HP"

8286,"IRONWORKERS","2009","Lansing","IW-55A",,"New","Yes",,"2009 Lansing
IW-55A ","P8915",$12500.00,"0","Yes","55","3/4""","14"" x 7/16""","1
1/4""","3","Tons","Punch","Shear","Bar","HP"

8434,"IRONWORKERS",,"Mubea","KBL 2.5",,"Good","Yes",," Mubea KBL 2.5
","P8915",$7500.00,"0","Yes","104","13/16""","6
5/8""","2""","7","Tons","Punch","Shear","Bar","HP"

9765,"IRONWORKERS",,"Peddinghaus","210 Super 13",,"Very Good","Yes",,"
Peddinghaus 210 Super 13 ","P8915",$8000.00,"-1","Yes","65","1
1/16""","8"" x 1/2""","1 5/8""","5","Tons","Punch","Shear","Bar","HP"

9076,"IRONWORKERS","2003","Piranha","P-50",,"Very Good","Yes","50 Tons,
60 SPM, 3/4"" Punch Cap., 5"" x 5 x 3/8""Angle Shear Cap., 15"" x 5/8""
Flat Shear Cap., 1/4"" - 1 1/2"" Round Bar Cap., 1/2"" - 1"" Square Bar
Cap., Four (4) Way Press Brake Dies Set, Punch With Dies","2003 Piranha
P-50 ","P8915",$8450.00,"0","Yes","50","13/16""","15"" x 5/8""","1
1/2""","10","Tons","Punch","Shear","Bar","HP"

10626,"IRONWORKERS","2001","Scotchman","4014",,"Excellent","No",,"2001
Scotchman 4014 ","P8915",$6800.00,"-1","Yes","40","1""","6"" x
1/2""","2""","3","Tons","Punch","Shear","Bar","HP"

9351,"IRONWORKERS",,"Uni-Hydro","120-24",,"Good","Yes",," Uni-Hydro
120-24 ","P8915",$8950.00,"0","Yes","120","1 1/2""","24"" x
1/2""","1""","7.5","Tons","Punch","Shear","Bar","HP"

10178,"JIG BORERS, NC and CNC","1992/2002","Sip","740","Fanuc
11MF","Excellent","Yes",,"1992/2002 Sip 740 Fanuc
11MF","J5100",$380000.00,"-1","Yes","1",,,,,"Table","Spindle
Dia.","RPM","HP","Travels"

9825,"KEYSEATER",,"Mitts and Merrill","Model 7B","Allen Bradley","Very
Good","Yes",," Mitts and Merrill Model 7B Allen
Bradley","K3004",$48900.00,"-1","Yes","1",,,,,"Width","Length","Table","Cut
FPM","HP"

9100,"KEYSEATER","1942","Morton","30""",,"Good","Yes",,"1942 Morton 30""
","K3004",$6500.00,"0","Yes","1",,,,,"Width","Length","Table","Cut
FPM","HP"

7631,"LAPPING MACHINES","1995","Speedfam","BTAW-24",,"Good","Yes",,"1995
Speedfam BTAW-24 ","L0754",$11500.00,"0","Yes","1",,,,,"Style","Max.
Part","Max Plate","HP",

8927,"LASERS","1996","Amada","Pulsar LC1212XL","Fanuc
16L","Good","Yes",,"1996 Amada Pulsar LC1212XL Fanuc
16L","L0850",$39500.00,"0","Yes","1",,,,,"Table","Table
Load","Travels","Watts","Cut Rate"

9481,"LASERS","2006","BLM Adige","Lasertube Model LT72D","Siemens
840D","Very Good","Yes",,"2006 BLM Adige Lasertube Model LT72D Siemens
840D","L0850",$599500.00,"0","Yes","1",,,,,"Table","Table
Load","Travels","Watts","Cut Rate"

8525,"LASERS","2003","BLM Adige","Lasertube Model LT70D","Siemens
840D","Very Good","Yes",,"2003 BLM Adige Lasertube Model LT70D Siemens
840D","L0850",$415000.00,"0","Yes","1",,,,,"Table","Table
Load","Travels","Watts","Cut Rate"

9002,"LASERS","1991","Cincinnati","CL5-350","Fanuc","Good","No",,"1991
Cincinnati CL5-350 Fanuc","L0850",$40000.00,"-1","On
Way","1",,,,,"Table","Table Load","Travels","Watts","Cut Rate"

9490,"LASERS","2006","Mazak","Fabri Gear 150 3D","Mazak","Very
Good","Yes",,"2006 Mazak Fabri Gear 150 3D
Mazak","L0850",$779500.00,"0","Yes","1",,,,,"Table","Table
Load","Travels","Watts","Cut Rate"

9482,"LASERS","2005/2007","Trumpf","Tubematic RC","Siemens 840D","Very
Good","Yes",,"2005/2007 Trumpf Tubematic RC Siemens
840D","L0850",$595000.00,"0","Yes","1",,,,,"Table","Table
Load","Travels","Watts","Cut Rate"

9845,"LATHES, CNC, 2-AXIS, CHUCKER","1996","Daewoo","Puma-V-10","Fanuc
OT","Good","Yes",,"1996 Daewoo Puma-V-10 Fanuc
OT","L2125",,"-1","Yes","18.5""","15.4"" x
13""","3,600","1.75""","8","Swing","Travels","RPM","Bar Cap.","Stations"

9846,"LATHES, CNC, 2-AXIS, CHUCKER","1996","Daewoo","Puma-V-10","Fanuc
OT","Need Minor Repairs","Yes",,"1996 Daewoo Puma-V-10 Fanuc
OT","L2125",,"-1","Yes","18.5""","15.4"" x
13""","2,000","1.75""","8","Swing","Travels","RPM","Bar Cap.","Stations"

9894,"LATHES, CNC, 2-AXIS, CHUCKER","2000","Daewoo","Puma-V-300
G",,"Good","Yes",,"2000 Daewoo Puma-V-300 G
","L2125",,"-1","Yes","18.5""","15.4"" x
13""","2,000","1.75""","8","Swing","Travels","RPM","Bar Cap.","Stations"

10584,"LATHES, CNC, 2-AXIS, CHUCKER","2006","Doosan","Puma-V-850","Fanuc
18iT","Very Good","Yes",,"2006 Doosan Puma-V-850 Fanuc
18iT","L2125",$325000.00,"0","Yes","39.37""","17.5"" x
36.5""","1,800","4.33""","12 + 12","Swing","Travels","RPM","Bar
Cap.","Stations"

10526,"LATHES, CNC, 2-AXIS, CHUCKER","2007","Doosan","Lynx-220A","Fanuc
0iTE","Very Good","Yes",,"2007 Doosan Lynx-220A Fanuc
0iTE","L2125",$64500.00,"0","Yes","20.1""","6.3"" x
20.9""","6,000","1.75""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10011,"LATHES, CNC, 2-AXIS, CHUCKER","1999","Haas","SL-20","Haas 32
BIT","Very Good","Yes",,"1999 Haas SL-20 Haas 32
BIT","L2125",$29900.00,"0","Yes","23""","8.45"" x
20""","4,000","2.06""","10","Swing","Travels","RPM","Bar
Cap.","Stations"

9427,"LATHES, CNC, 2-AXIS, CHUCKER","2008","Haas","SL-20 BB APL","Haas
32 BIT","Like New","Yes",,"2008 Haas SL-20 BB APL Haas 32
BIT","L2125",$92500.00,"0","Yes","23""","8.45"" x
20""","3,400","2.5""","10","Swing","Travels","RPM","Bar Cap.","Stations"

7666,"LATHES, CNC, 2-AXIS, CHUCKER","2000","Hardinge","Cobra-65","Fanuc
21iT","Good","Yes",,"2000 Hardinge Cobra-65 Fanuc
21iT","L2125",$29900.00,"0","Yes","21.3""","8.45"" x
20""","4,500","2.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"

10351,"LATHES, CNC, 2-AXIS, CHUCKER","1992","Mazak","Quick
Turn-15N","Mazatrol T-32-2","Good","Yes",,"1992 Mazak Quick Turn-15N
Mazatrol T-32-2","L2125",$17500.00,"0","Yes","17.32""","7.09"" x
20.08""","4,500","1.96""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

9987,"LATHES, CNC, 2-AXIS, CHUCKER","1998","Mazak","Quick
Turn-40N","Mazatrol T-Plus","Good","Yes",,"1998 Mazak Quick Turn-40N
Mazatrol T-Plus","L2125",$62000.00,"-1","On Way","20.08""","9.3"" x
40""","3,000","2.75""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10332,"LATHES, CNC, 2-AXIS, CHUCKER","1998","Mazak","Powermaster
1100","Mazatrol T-Plus","Very Good","Yes",,"1998 Mazak Powermaster 1100
Mazatrol T-Plus","L2125",$199500.00,"0","Yes","36""","24 1/2"" x
44""","500","12.5""","8","Swing","Travels","RPM","Bar Cap.","Stations"

10386,"LATHES, CNC, 2-AXIS, CHUCKER","1980","Mazak","Powermaster
1100","Fanuc 5T","Good","Yes","33"" Swing, 37"" Swing In Gap, 16.5""
Length of Gap, 27"" Swing OCS, 25"" Turning Length, 1,200 RPM, 9.5""
Spindle Bore and Bar Capacity,, 60 HP, 8 Station Turret, 21"" x 29""
Travels, 24"" 3-Jaw Manual Chuck, Turret Tooling, Chip Conveyor, Tape
Reader","1980 Mazak Powermaster 1100 Fanuc
5T","L2125",$69900.00,"-1","Yes","33""","21"" x
29""","1,200","9.5""","8","Swing","Travels","RPM","Bar Cap.","Stations"

9365,"LATHES, CNC, 2-AXIS, CHUCKER","1981/2006","Mazak","Powermaster
1600","Fanuc 18iT","Rebuilt","Yes",,"1981/2006 Mazak Powermaster 1600
Fanuc 18iT","L2125",$165500.00,"0","Yes","42""","22.5"" x
44.88""","500","12.5""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

9364,"LATHES, CNC, 2-AXIS, CHUCKER","1981","Mazak","Powermaster
1600","Fanuc 6T","Very Good","Yes",,"1981 Mazak Powermaster 1600 Fanuc
6T","L2125",$69500.00,"0","Yes","42""","22.5"" x
44.88""","500","9""","8","Swing","Travels","RPM","Bar Cap.","Stations"

9741,"LATHES, CNC, 2-AXIS, CHUCKER","1997","Mazak","Slant
Turn-30","Mazatrol T-Plus","Very Good","Yes","21.25"" Swing, 12.99""
OCS, 63"" Centers, 3,000 RPM, 3.15"" Bore, 30 HP, 12 Station Turret,
Tailstock, 10"" 3-Jaw Chuck, RS-232 Port, Miscellaneous Tooling","1997
Mazak Slant Turn-30 Mazatrol
T-Plus","L2125",$47900.00,"-1","Yes","21.25""","12.99"" x
52.7""","3,000","2.75""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10250,"LATHES, CNC, 2-AXIS, CHUCKER","1992","Miyano","BNC-34","Fanuc
0T","Very Good","Yes","10.5"" Swing, 4 1/16"" Max. Turning Dia., 9""
Turning Length, 5,000 RPM, 7.5 HP, 6 Sta. Turret, Tailstock, Parts
Catcher, RS-232 Port, Tool Holders","1992 Miyano BNC-34 Fanuc
0T","L2125",,"-1","On Way","10 1/2""","4"" x 9 1/4""","5,000","1
1/4""","6","Swing","Travels","RPM","Bar Cap.","Stations"

9966,"LATHES, CNC, 2-AXIS, CHUCKER","1984","Mori-Seiki","SL-8F","Fanuc
6TB","Very Good","Yes",,"1984 Mori-Seiki SL-8F Fanuc
6TB","L2125",$129500.00,"0","Yes","51.1""","16.5"" x
43.3""","143","8""","6","Swing","Travels","RPM","Bar Cap.","Stations"

10288,"LATHES, CNC, 2-AXIS, CHUCKER","1996","Mori-Seiki","CL-25A","Fanuc
21T","Very Good","Yes",,"1996 Mori-Seiki CL-25A Fanuc
21T","L2125",,"-1","On Way","20.5""","10.2"" x
19.7""","3,000","2.6""","10","Swing","Travels","RPM","Bar
Cap.","Stations"

10605,"LATHES, CNC, 2-AXIS, CHUCKER","1982","Mori-Seiki","SL-6B","Fanuc
6TB","Very Good","Yes",,"1982 Mori-Seiki SL-6B Fanuc
6TB","L2125",$144500.00,"0","Yes","27.56""","13.77"" x
33.86""","1,010","6.18""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

8211,"LATHES, CNC, 2-AXIS,
CHUCKER","2000","Mori-Seiki","CL-203B","Mitsubishi MSG-803","Very
Good","Yes",,"2000 Mori-Seiki CL-203B Mitsubishi
MSG-803","L2125",$39500.00,"0","Yes","20.3""","9.25"" x
12.2""","3,500","2.25""","10","Swing","Travels","RPM","Bar
Cap.","Stations"

10556,"LATHES, CNC, 2-AXIS,
CHUCKER","1998","Mori-Seiki","CL-200B","MSC-803L","Fair","Yes","Swing
Over Bed 20.3"", Swing Over Saddle 9.5"", Maximum Turning Diameter
16.14"", Length 14.6"", 4,500 RPM, 15 HP, 10 Sta. Turret, Tailstock,
Parts Catcher, 8"" 3-Jaw Chuck, Chip Conveyor, Iemca TAL 12' Bar Feed,
Oil Mist Extraction Unit, Specialized 12’ Bar Carrier With Crane","1998
Mori-Seiki CL-200B MSC-803L","L2125",$27500.00,"0","Yes","20.3""","7.6""
x 14.6""","3,500","2.55""","10","Swing","Travels","RPM","Bar
Cap.","Stations"

10273,"LATHES, CNC, 2-AXIS, CHUCKER","1998","Mori-Seiki","SL-80A","Fanuc
16T","Good","Yes",,"1998 Mori-Seiki SL-80A Fanuc
16T","L2125",$99500.00,"0","Yes","39.4""","16.5"" x
43.3""","750","8""","6","Swing","Travels","RPM","Bar Cap.","Stations"

10166,"LATHES, CNC, 2-AXIS,
CHUCKER","1982/2003","Mori-Seiki","SL-8F","Fanuc OTC","Very
Good","Yes",,"1982/2003 Mori-Seiki SL-8F Fanuc
OTC","L2125",$105000.00,"0","Yes","51.1""","16.5"" x
41.2""","143","8.5""","6","Swing","Travels","RPM","Bar Cap.","Stations"

10133,"LATHES, CNC, 2-AXIS, CHUCKER","1994","Mori-Seiki","SL-35
B","Fanuc 16T","Needs Repair","Yes",,"1994 Mori-Seiki SL-35 B Fanuc
16T","L2125",$19500.00,"-1","Yes","23.6""","9.4"" x
33.7""","2,500","3.5""","10","Swing","Travels","RPM","Bar
Cap.","Stations"

9225,"LATHES, CNC, 2-AXIS,
CHUCKER","1999","Mori-Seiki","CL-153","Mitsubishi MSG-803","Very
Good","Yes",,"1999 Mori-Seiki CL-153 Mitsubishi
MSG-803","L2125",$27500.00,"0","Yes","20.28""","9.25"" x
12.2""","6,000","1.3""","10","Swing","Travels","RPM","Bar
Cap.","Stations"

7998,"LATHES, CNC, 2-AXIS, CHUCKER","1982","Okuma","LC-30
1C","OSP-3000L","Good","Yes","19.69"" Swing, 17.72"" Turn Dia., 3,000
RPM, 40 HP, 12 Sta. Turret, Autoblok KNCS-NB 315-91 Quick Change Chuck,
Miscellaneous Tool Holders, Chip Conveyor, Coolant System, Miscellaneous
Spare Parts, RS-232 Port","1982 Okuma LC-30 1C
OSP-3000L","L2125",$8500.00,"-1","Yes","19.69""","11.42"" x
40.16""","3,000","2.5""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

9056,"LATHES, CNC, 2-AXIS, CHUCKER","1996","Okuma and
Howa","HL-20","Fanuc 18T","Good","No",,"1996 Okuma and Howa HL-20 Fanuc
18T","L2125",$25000.00,"-1","Yes","22""","7.1"" x
18.1""","4,500","2.07""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

9366,"LATHES, CNC, 2-AXIS, CHUCKER","2010","Willis","5240-10","Fanuc
OiTC","New","Yes",,"2010 Willis 5240-10 Fanuc
OiTC","L2125",$189000.00,"0","Yes","52""","27"" x
43""","550","10""","4","Swing","Travels","RPM","Bar Cap.","Stations"

10402,"LATHES, CNC, 2-AXIS,
UNIVERSAL","2004","Amera-Seiki","GR-2","Fanuc OTC","Very
Good","No",,"2004 Amera-Seiki GR-2 Fanuc OTC","L2150",,"-1","On
Way","21.6""","9.1"" x
21.6""","5,000","2""","12","Swing","Travels","RPM","Bar Cap.","Stations"

10401,"LATHES, CNC, 2-AXIS,
UNIVERSAL","2004","Amera-Seiki","GR-2","Fanuc OTC","Very
Good","No",,"2004 Amera-Seiki GR-2 Fanuc OTC","L2150",,"-1","On
Way","21.6""","9.1"" x
21.6""","5,000","2""","12","Swing","Travels","RPM","Bar Cap.","Stations"

7702,"LATHES, CNC, 2-AXIS, UNIVERSAL","2009","Amera-Seiki","LT-50 /
120""","Fanuc 0iTC","New","Yes",,"2009 Amera-Seiki LT-50 / 120"" Fanuc
0iTC","L2150",$457995.00,"-1","Yes","50""","21"" x
118""","600","8.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"

9878,"LATHES, CNC, 2-AXIS, UNIVERSAL","1981","American","37"" x
96""","GE 2000","Very Good","Yes",,"1981 American 37"" x 96"" GE
2000","L2150",$39500.00,"0","Yes","37""","12.5"" x
98""","675","6.25""","4","Swing","Travels","RPM","Bar Cap.","Stations"

8705,"LATHES, CNC, 2-AXIS, UNIVERSAL","2002","Birmingham","Top-Turn
406","Fagor 8025","Very Good","Yes","16"" Swing, 34"" Centers, 3,000
RPM, 7.5 HP, 4 Turret, Tailstock, 8"" 3-Jaw Chuck, 10"" 4-Jaw Chuck, 15”
Face Plate, Two (2) Ball Bearing Steady Rests, Two (2) Speed Manual
Tailstock, Bison Manual 5C Collets Chuck, Threading","2002 Birmingham
Top-Turn 406 Fagor 8025","L2150",$14000.00,"-1","Yes","16""","8 1/4"" x
30""","3,000","2 1/4""","4","Swing","Travels","RPM","Bar
Cap.","Stations"

9592,"LATHES, CNC, 2-AXIS, UNIVERSAL","1976/96","Cincinnati","18-C","GE
Fanuc 18TB","Very Good","Yes","30.5"" Swing, 2,240 RPM, 50 HP, 22.5 x
34"" Travels, 4"" Bar Cap., 6 I.D. & 6 O.D. Turret, 18"" 3-Jaw Hydraulic
Chuck, Chip Conveyor, Programmable Swing-Down Tailstock,Pendant
Control,Coolant, Hard and Soft Jaws","1976/96 Cincinnati 18-C GE Fanuc
18TB","L2150",$125000.00,"0","Yes","30.5""","18"" x
42.5""","2,240","3.5""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10333,"LATHES, CNC, 2-AXIS,
UNIVERSAL","1995","Daewoo","Puma-12LB","Mitsubishi 520L","Very
Good","Yes",,"1995 Daewoo Puma-12LB Mitsubishi
520L","L2150",$29500.00,"0","Yes","22.4""","10.2"" x
41.3""","2,000","3.75""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

9802,"LATHES, CNC, 2-AXIS, UNIVERSAL","2006","Daewoo","Puma-700L","Fanuc
21iTB","Very Good","Yes",,"2006 Daewoo Puma-700L Fanuc
21iTB","L2150",$275000.00,"0","Yes","40.5""","18.5"" x
127.98""","1,500","6.5""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

8773,"LATHES, CNC, 2-AXIS, UNIVERSAL","1995","Daewoo","Puma-8 S","Fanuc
OTC","Good","Yes","19.7"" Swing, 12.2"" SOC, 18"" Centers, 5,000 RPM,2""
Bar Cap., 20 HP, 12 Sta. Turret, 8"" 3-Jaw Hydraulic Chuck, Programmable
Tailstock, Chip Conveyor, Tool Eye, RS-232 Port","1995 Daewoo Puma-8 S
Fanuc OTC","L2150",$24500.00,"-1","Yes","19.7""","7.9"" x
15""","5,000","2.05""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10614,"LATHES, CNC, 2-AXIS, UNIVERSAL","1997","Daewoo","Proturn 60 x
3000","Fanuc 18TC","Good","Yes",,"1997 Daewoo Proturn 60 x 3000 Fanuc
18TC","L2150",$89000.00,"0","Yes","27.95""","23.8"" x
122""","1,000","6.5""","6 + 8","Swing","Travels","RPM","Bar
Cap.","Stations"

10320,"LATHES, CNC, 2-AXIS,
UNIVERSAL","2001","Daewoo","Lynx-210A","Fanuc OiTA","Very
Good","Yes",,"2001 Daewoo Lynx-210A Fanuc
OiTA","L2150",$24500.00,"0","Yes","20.1""","6.3"" x
13""","6,000","1.75""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10098,"LATHES, CNC, 2-AXIS,
UNIVERSAL","1998","Daewoo","Lynx-200A","Fanuc 21T","Very
Good","Yes",,"1998 Daewoo Lynx-200A Fanuc
21T","L2150",$24500.00,"0","Yes","20.1""","6.3"" x
13""","6,000","1.75""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

7999,"LATHES, CNC, 2-AXIS, UNIVERSAL","1987","Daewoo","Puma-6H S","Fanuc
10T","Good","Yes",,"1987 Daewoo Puma-6H S Fanuc
10T","L2150",$18500.00,"-1","Yes","17.75""","6.3"" x
16.4""","6,000","1.26""","10","Swing","Travels","RPM","Bar
Cap.","Stations"

10373,"LATHES, CNC, 2-AXIS,
UNIVERSAL","1997","Daewoo","Lynx-200A","Mitsubishi Meldas 50L","Very
Good","Yes",,"1997 Daewoo Lynx-200A Mitsubishi Meldas
50L","L2150",$22500.00,"0","Yes","18.11""","6.3"" x
13""","5,000","1.5""","10","Swing","Travels","RPM","Bar Cap.","Stations"

9782,"LATHES, CNC, 2-AXIS, UNIVERSAL","1995","Daewoo","Puma-12LB","Fanuc
15T","Good","Yes",,"1995 Daewoo Puma-12LB Fanuc
15T","L2150",$39900.00,"0","Yes","22.4""","10.2"" x
41.3""","2,000","3.75""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10527,"LATHES, CNC, 2-AXIS, UNIVERSAL","2000","Daewoo","Puma-200
LC","Mitsubishi 520L","Very Good",,,"2000 Daewoo Puma-200 LC Mitsubishi
520L","L2150",$28000.00,"0","Yes","20.1""","9.5"" x
22.83""","4,500","2.56""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

9354,"LATHES, CNC, 2-AXIS,
UNIVERSAL","2008","Doosan","Lynx-200A","Mitsubishi
M50-L","Excellent","Yes",,"2008 Doosan Lynx-200A Mitsubishi
M50-L","L2150",$48000.00,"0","Yes","18.1""","6.3"" x
13""","6,000","1.75""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

9794,"LATHES, CNC, 2-AXIS, UNIVERSAL","1999","Doosan","S390L","Fanuc
18T","Very Good","Yes",,"1999 Doosan S390L Fanuc
18T","L2150",$39000.00,"0","Yes","30.3""","10"" x
39.52""","3,500","3.6""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

9715,"LATHES, CNC, 2-AXIS,
UNIVERSAL","2007","Doosan","Lynx-220LC","Fanuc 21T","Very
Good","Yes",,"2007 Doosan Lynx-220LC Fanuc
21T","L2150",$59500.00,"0","Yes","20.1""","6.3"" x
20.9""","4,000","2.62""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

9941,"LATHES, CNC, 2-AXIS, UNIVERSAL","2006","Doosan","S-400","Fanuc
OiT","Very Good","Yes",,"2006 Doosan S-400 Fanuc
OiT","L2150",$49900.00,"0","Yes","24.02""","8.45"" x
28.1""","3,500","3.01""","10","Swing","Travels","RPM","Bar
Cap.","Stations"

10495,"LATHES, CNC, 2-AXIS,
UNIVERSAL","2008","Doosan","Puma-400B","Fanuc
21iTB","Excellent","Yes",,"2008 Doosan Puma-400B Fanuc
21iTB","L2150",$139000.00,"0","Yes","30.3""","14.3"" x
43.5""","2,000","4.62""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

6559,"LATHES, CNC, 2-AXIS, UNIVERSAL","2001","Doosan","T-210","Fanuc
18T","Good","Yes",,"2001 Doosan T-210 Fanuc
18T","L2150",$79900.00,"0","Yes","14.1""","8.27"" x
7.88""","4,000","2""","10","Swing","Travels","RPM","Bar Cap.","Stations"

10347,"LATHES, CNC, 2-AXIS, UNIVERSAL","2001","Femco","HL-55S","Fanuc
OT","Very Good","Yes",,"2001 Femco HL-55S Fanuc
OT","L2150",$72000.00,"0","Yes","28.62""","13.39"" x
43.31""","2,500","4.53""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10052,"LATHES, CNC, 2-AXIS, UNIVERSAL","2000","Femco","Durga 25","Fanuc
OTC","Good","Yes",,"2000 Femco Durga 25 Fanuc
OTC","L2150",$22500.00,"0","Yes","17.75""","8.45"" x
20""","4,800","2""","10","Swing","Travels","RPM","Bar Cap.","Stations"

10230,"LATHES, CNC, 2-AXIS, UNIVERSAL","2007","Haas","SL-30T","Haas 32
BIT","Very Good","Yes",,"2007 Haas SL-30T Haas 32
BIT","L2150",$62500.00,"0","Yes","30""","11.3"" x
34""","3,400","3""","12","Swing","Travels","RPM","Bar Cap.","Stations"

10577,"LATHES, CNC, 2-AXIS, UNIVERSAL","2005","Haas","SL-30T BB","Haas
32 BIT","Very Good","Yes",,"2005 Haas SL-30T BB Haas 32
BIT","L2150",$63500.00,"0","Yes","30""","11.3"" x
24""","2,800","4""","12","Swing","Travels","RPM","Bar Cap.","Stations"

10414,"LATHES, CNC, 2-AXIS, UNIVERSAL","1999","Haas","SL-30T","Haas 32
BIT","Good","Yes",,"1999 Haas SL-30T Haas 32
BIT","L2150",$39500.00,"0","Yes","30""","11.3"" x
34""","3,400","3""","12","Swing","Travels","RPM","Bar Cap.","Stations"

10370,"LATHES, CNC, 2-AXIS, UNIVERSAL","2007","Haas","TL-3","Haas 32
BIT","Very Good","Yes",,"2007 Haas TL-3 Haas 32
BIT","L2150",$49900.00,"0","Yes","20""","12"" x
60""","1,800","3""","10","Swing","Travels","RPM","Bar Cap.","Stations"

10576,"LATHES, CNC, 2-AXIS, UNIVERSAL","2006","Haas","SL-30T","Haas 32
BIT","Very Good","Yes",,"2006 Haas SL-30T Haas 32
BIT","L2150",$54500.00,"0","Yes","30""","11.3"" x
34""","3,400","3""","12","Swing","Travels","RPM","Bar Cap.","Stations"

10291,"LATHES, CNC, 2-AXIS, UNIVERSAL","1999","Haas","SL-20T BB","Haas
32 BIT","Excellent","Yes",,"1999 Haas SL-20T BB Haas 32
BIT","L2150",$35000.00,"0","Yes","20""","8.45"" x
20""","3,400","2.5""","10","Swing","Travels","RPM","Bar Cap.","Stations"

10301,"LATHES, CNC, 2-AXIS, UNIVERSAL","2005","Haas","SL-30T","Haas 32
BIT","Very Good","Yes","30"" Swing, 14.5"" OCS, 14.5"" Max Mach., 34""
BC, 3,400 RPM, 30 HP, 12 Sta. Turret, 3"" Bar Cap., 10"" 3-Jaw,
Programmable Tailstock, Bar Feed Interface, Two (2) Speed Gear Box,
Rigid Tapping, 1 Meg Memory, Parts Catcher, Spindle Orientation, High
Intensity Lighting, Chip Auger, Under 1,000 Spindle Hours","2005 Haas
SL-30T Haas 32 BIT","L2150",$69900.00,"0","Yes","30""","11.3"" x
34""","3,400","3""","12","Swing","Travels","RPM","Bar Cap.","Stations"

10536,"LATHES, CNC, 2-AXIS, UNIVERSAL","2007","Haas","TL-2","Haas 32
BIT","Excellent","Yes",,"2007 Haas TL-2 Haas 32
BIT","L2150",$42500.00,"0","Yes","20""","12"" x
60""","1,800","3.5""","4","Swing","Travels","RPM","Bar Cap.","Stations"

9503,"LATHES, CNC, 2-AXIS, UNIVERSAL","2007","Haas","SL-30T","Haas 32
BIT","Very Good","Yes",,"2007 Haas SL-30T Haas 32
BIT","L2150",$64000.00,"0","Yes","30""","11.3"" x
34""","2,400","3""","12","Swing","Travels","RPM","Bar Cap.","Stations"

10463,"LATHES, CNC, 2-AXIS, UNIVERSAL","2006","Hankook","ProTurn","Fanuc
21iTB","Good","Yes",,"2006 Hankook ProTurn Fanuc
21iTB","L2150",$199000.00,"0","Yes","42""","18"" x
158""","630","10""","8","Swing","Travels","RPM","Bar Cap.","Stations"

9780,"LATHES, CNC, 2-AXIS, UNIVERSAL","1996","Hardinge","Conquest
T-42","Fanuc 18TC","Good","Yes",,"1996 Hardinge Conquest T-42 Fanuc
18TC","L2150",$29500.00,"0","Yes","21.2""","5.31"" x
13.9""","4,400","2""","15","Swing","Travels","RPM","Bar Cap.","Stations"

9822,"LATHES, CNC, 2-AXIS, UNIVERSAL","1997","Harrison","Alpha
400","Harrison / Fanuc Control","Good","Yes",,"1997 Harrison Alpha 400
Harrison / Fanuc Control","L2150",$17950.00,"0","Yes","16""","8.25"" x
45""","2,500","2""","4","Swing","Travels","RPM","Bar Cap.","Stations"

10613,"LATHES, CNC, 2-AXIS,
UNIVERSAL","1980","Hitachi-Seiki","4NE-600","Fanuc
6T","Good","Yes",,"1980 Hitachi-Seiki 4NE-600 Fanuc
6T","L2150",$10500.00,"-1","Yes","22.75""","7.87"" x
24.4""","3,150","2.25","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10194,"LATHES, CNC, 2-AXIS,
UNIVERSAL","1982","Hitachi-Seiki","4NE-600","Fanuc
6TB","Good","No",,"1982 Hitachi-Seiki 4NE-600 Fanuc
6TB","L2150",$36500.00,"-1","Yes","22.75""","7.87"" x
24.4""","3,150","2.25""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

8043,"LATHES, CNC, 2-AXIS, UNIVERSAL","1986","Hitachi-Seiki","Hitec-Turn
20","Seicos Multi","Good","Yes","17.7"" Swing, 11.2"" OCS, 16"" Centers,
3,600 RPM, 15 HP, 10 Station Turret, 8"" 3-Jaw Hydraulic Chuck,
Hydraulic Tailstock With Programmable Quill, Color CRT, RS-232 Port,
Turret Tooling, Coolant System, Chip Conveyor, Conversational
Control","1986 Hitachi-Seiki Hitec-Turn 20 Seicos
Multi","L2150",$19500.00,"-1","Yes","17.7""","6.7"" x
13.4""","3,600","1.5""","10","Swing","Travels","RPM","Bar
Cap.","Stations"

9923,"LATHES, CNC, 2-AXIS, UNIVERSAL","2002","Hwacheon","Mega 58","Fanuc
21T","Excellent","Yes",,"2002 Hwacheon Mega 58 Fanuc
21T","L2150",$62500.00,"0","Yes","22.8""","6.9"" x
50""","1,500","3""","8","Swing","Travels","RPM","Bar Cap.","Stations"

9940,"LATHES, CNC, 2-AXIS, UNIVERSAL","1982","Ikegai","AX-30N","Fanuc
6TB","Good","Yes",,"1982 Ikegai AX-30N Fanuc
6TB","L2150",,"-1","Yes","23.625""","11.812"" x
60""","2,500","3.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"

9915,"LATHES, CNC, 2-AXIS, UNIVERSAL","2005","Johnford","ST-70C","Fanuc
21i","Very Good","Yes",,"2005 Johnford ST-70C Fanuc
21i","L2150",$129500.00,"0","Yes","31.1""","12.6"" x
63""","1,200","5.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"

10399,"LATHES, CNC, 2-AXIS, UNIVERSAL","2002","Johnford","SL-65B","Fanuc
OiT","Very Good","Yes",,"2002 Johnford SL-65B Fanuc
OiT","L2150",$59900.00,"0","Yes","22.83""","10"" x
59""","3,500","3""","12","Swing","Travels","RPM","Bar Cap.","Stations"

9545,"LATHES, CNC, 2-AXIS, UNIVERSAL","1986","Kuraki","LCN 12-20","Fanuc
3TB","Very Good","Yes","b","1986 Kuraki LCN 12-20 Fanuc
3TB","L2150",$122500.00,"0","Yes","32 1/4""","10"" x 75""","350","12
5/8""","4","Swing","Travels","RPM","Bar Cap.","Stations"

9228,"LATHES, CNC, 2-AXIS, UNIVERSAL","1982","Lodge and
Shipley","1540U","GE 1050","Good","Yes","30"" Swing, 16"" SOC, 17.3 Turn
Dia., 78"" Centers, 2,000 RPM, 50 HP, 12 Station Turret, 15"" 3-Jaw
Chuck, Geared Head, Programmable Tail Stock, Steady Rest, Chip Conveyor,
Coolant Through Turret","1982 Lodge and Shipley 1540U GE
1050","L2150",$19500.00,"-1","Yes","30""","15.2"" x
78""","2,000","4""","12","Swing","Travels","RPM","Bar Cap.","Stations"

9591,"LATHES, CNC, 2-AXIS, UNIVERSAL","1980/95","Lodge and
Shipley","Profiturn","Fanuc GNO","Good","Yes",,"1980/95 Lodge and
Shipley Profiturn Fanuc GNO","L2150",$98000.00,"0","Yes","40""","24
3/4"" x 300""","650","12 1/2""","4","Swing","Travels","RPM","Bar
Cap.","Stations"

9229,"LATHES, CNC, 2-AXIS, UNIVERSAL","1982","Lodge and
Shipley","1225U","GE 1050","Good","Yes","25"" Swing, 12"" SOC, 15.2 Turn
Dia., 78"" Centers, 2,500 RPM, 40 HP, 12 Station Turret, 15"" 3-Jaw
Chuck, Geared Head, Programmable Tail Stock, Steady Rest, Chip Conveyor,
Coolant Through Turret","1982 Lodge and Shipley 1225U GE
1050","L2150",$19500.00,"-1","No","25""","12.2"" x
78""","2,500","3""","16","Swing","Travels","RPM","Bar Cap.","Stations"

9819,"LATHES, CNC, 2-AXIS, UNIVERSAL","1983/97","Lodge and
Shipley","Profiturn 40","Fanuc GNO","Very Good","Yes",,"1983/97 Lodge
and Shipley Profiturn 40 Fanuc
GNO","L2150",$62000.00,"0","Yes","40""","24 3/4"" x 300""","650","12
1/2""","4","Swing","Travels","RPM","Bar Cap.","Stations"

10569,"LATHES, CNC, 2-AXIS, UNIVERSAL","1994","Mazak","Quick
Turn-18N","Mazatrol T-32B","Good","Yes",,"1994 Mazak Quick Turn-18N
Mazatrol T-32B","L2150",$19500.00,"0","Yes","17.32""","7.09"" x
20.08""","3,600","2.75","8","Swing","Travels","RPM","Bar
Cap.","Stations"

7480,"LATHES, CNC, 2-AXIS, UNIVERSAL","1980","Mazak","Powermaster
R3000","Fanuc 20C","Good","No",,"1980 Mazak Powermaster R3000 Fanuc
20C","L2150",$99500.00,"0","Yes","36""","17.2"" x
120""","1,500","5.252""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

10598,"LATHES, CNC, 2-AXIS, UNIVERSAL","1984","Mazak","M-5 /
1500","Fanuc 6TB","Good","Yes",,"1984 Mazak M-5 / 1500 Fanuc
6TB","L2150",$34500.00,"-1","Yes","24""","21.25"" x
60""","1,100","6.5","8 + 6","Swing","Travels","RPM","Bar
Cap.","Stations"

9037,"LATHES, CNC, 2-AXIS, UNIVERSAL","2008","Mazak","Quick Turn
Nexus-250","Mazatrol Matrix","Excellent","Yes",,"2008 Mazak Quick Turn
Nexus-250 Mazatrol Matrix","L2150",$92000.00,"-1","Yes","24.02""","7.5""
x 20.25""","4,000","3""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

9155,"LATHES, CNC, 2-AXIS, UNIVERSAL","1988","Mazak","Quick
Turn-10N","Mazatrol T-2","Very Good","Yes",,"1988 Mazak Quick Turn-10N
Mazatrol T-2","L2150",$18000.00,"0","Yes","17.6""","6.5"" x
21.4""","3,600","1.55""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

10599,"LATHES, CNC, 2-AXIS, UNIVERSAL","1984","Mazak","M-5 /
2000","Fanuc 6TB","Good","Yes",,"1984 Mazak M-5 / 2000 Fanuc
6TB","L2150",$39500.00,"-1","Yes","24""","21.25"" x
80""","1,100","6.5","8 + 6","Swing","Travels","RPM","Bar
Cap.","Stations"

6050,"LATHES, CNC, 2-AXIS, UNIVERSAL","1980","Mazak","M-4 / 1500","Fanuc
6TB","Good","Yes",,"1980 Mazak M-4 / 1500 Fanuc
6TB","L2150",$20000.00,"-1","Yes","22""","21.7"" x
62""","2,200","2.5""","10","Swing","Travels","RPM","Bar Cap.","Stations"

8312,"LATHES, CNC, 2-AXIS, UNIVERSAL","1979","Mazak","M-5","Fanuc
6T","Good","Yes",,"1979 Mazak M-5 Fanuc
6T","L2150",$49500.00,"0","Yes","24""","22"" x
100""","2,300","4.1""","14","Swing","Travels","RPM","Bar
Cap.","Stations"

9250,"LATHES, CNC, 2-AXIS, UNIVERSAL","1995","Mazak","M-5 /
2500","Mazatrol T-Plus","Excellent","Yes",,"1995 Mazak M-5 / 2500
Mazatrol T-Plus","L2150",$89500.00,"0","Yes","24""","21.25"" x
96""","1,800","6.5""","14","Swing","Travels","RPM","Bar Cap.","Stations"

10492,"LATHES, CNC, 2-AXIS, UNIVERSAL","1995","Mazak","Quick
Turn-18N","Mazatrol T-Plus","Good","Yes",,"1995 Mazak Quick Turn-18N
Mazatrol T-Plus","L2150",$31500.00,"0","Yes","17.32""","7.09"" x
20.08""","4,500","2.75","8","Swing","Travels","RPM","Bar
Cap.","Stations"

9505,"LATHES, CNC, 2-AXIS, UNIVERSAL","1992","Mazak","Quick
Turn-28N","Mazatrol T-32-2","Good","Yes",,"1992 Mazak Quick Turn-28N
Mazatrol T-32-2","L2150",$28500.00,"0","Yes","20.6""","7.87"" x
40.16""","2,500","3.5""","16","Swing","Travels","RPM","Bar
Cap.","Stations"

9529,"LATHES, CNC, 2-AXIS, UNIVERSAL","1992","Mazak","Quick
Turn-10N","Mazatrol T-32B","Good","Yes",,"1992 Mazak Quick Turn-10N
Mazatrol T-32B","L2150",$19900.00,"0","Yes","17.32""","7.09"" x
20.08""","4,500","1.75""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

9534,"LATHES, CNC, 2-AXIS, UNIVERSAL","1993","Mazak","Quick
Turn-15N","Mazatrol T-32B","Good","Yes",,"1993 Mazak Quick Turn-15N
Mazatrol T-32B","L2150",$21500.00,"0","Yes","17.32""","7.09"" x
20.08""","4,500","1.96""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

9593,"LATHES, CNC, 2-AXIS, UNIVERSAL","1989","Mazak","Quick
Turn-15","Mazatrol T-2","Very Good","Yes","17.2"" Swing, 3,000 RPM, 20
HP, 20.08"" x 7.09"" Travels, 2.44"" Bar Cap., 8 Position Turret, 8""
3-Jaw Chuck, Tool Presetter, Tailstock,Parts Catcher","1989 Mazak Quick
Turn-15 Mazatrol T-2","L2150",$15500.00,"0","Yes","17.32""","7.09"" x
20.08""","3,000","1.96""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

10128,"LATHES, CNC, 2-AXIS, UNIVERSAL","1986","Mazak","Quick
Turn-10N","Mazatrol T-1","Fair","Yes",,"1986 Mazak Quick Turn-10N
Mazatrol T-1","L2150",,"-1","On Way","17.6""","6.5"" x
21.4""","3,600","1.55""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

10127,"LATHES, CNC, 2-AXIS, UNIVERSAL","1985","Mazak","Quick
Turn-10N","Mazatrol T-1","Fair","Yes",,"1985 Mazak Quick Turn-10N
Mazatrol T-1","L2150",,"-1","On Way","17.6""","6.5"" x
21.4""","3,600","1.55""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

9608,"LATHES, CNC, 2-AXIS, UNIVERSAL","2002","Mazak","Quick
Turn-350","Mazatrol Fusion 640 T","Good","Yes",,"2002 Mazak Quick
Turn-350 Mazatrol Fusion 640
T","L2150",$82500.00,"0","Yes","25.93""","10.63"" x
48.03""","2,500","4""","24","Swing","Travels","RPM","Bar
Cap.","Stations"

10009,"LATHES, CNC, 2-AXIS, UNIVERSAL","1979/1997","Mazak","M-5 /
2500","Mitsubishi Meldas 500","Good","Yes",,"1979/1997 Mazak M-5 / 2500
Mitsubishi Meldas 500","L2150",$59500.00,"0","Yes","24""","21.25' x
101""","1,000","6""","8 / 4","Swing","Travels","RPM","Bar
Cap.","Stations"

10554,"LATHES, CNC, 2-AXIS, UNIVERSAL","2001","Mazak","Quick
Turn-250","Mazatrol Fusion 640 T","Good","Yes",,"2001 Mazak Quick
Turn-250 Mazatrol Fusion 640
T","L2150",$49500.00,"0","Yes","23.65""","8.46"" x
20.1""","5,000","2""","12","Swing","Travels","RPM","Bar Cap.","Stations"

10367,"LATHES, CNC, 2-AXIS, UNIVERSAL","2001","Mazak","Super Quick
Turn-200","Mazatrol Fusion 640 T","Good","Yes",,"2001 Mazak Super Quick
Turn-200 Mazatrol Fusion 640
T","L2150",$27500.00,"0","Yes","20.67""","7.48"" x
22.625""","5,000","2.01""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

9820,"LATHES, CNC, 2-AXIS, UNIVERSAL","2006","Mighty
Viper","VT-40A","Fanuc 21iTB","Excellent","Yes",,"2006 Mighty Viper
VT-40A Fanuc 21iTB","L2150",$79500.00,"0","Yes","39.37""","17.72"" x
39.37""","2,100","4""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10249,"LATHES, CNC, 2-AXIS, UNIVERSAL","1992","Miyano","BNC-34C","Fanuc
0T","Very Good","Yes","10.5"" Swing, 4 1/16"" Max. Turning Dia., 9""
Turning Length, 5,000 RPM, 7.5 HP, 6 Sta. Turret, Tailstock, Parts
Catcher, RS-232 Port, Tool Holders","1992 Miyano BNC-34C Fanuc
0T","L2150",,"-1","On Way","10 1/2""","4"" x 9 1/4""","5,000","1
1/4""","6","Swing","Travels","RPM","Bar Cap.","Stations"

10265,"LATHES, CNC, 2-AXIS,
UNIVERSAL","1997","Mori-Seiki","SL-200","Mitsubishi MSC-501
(18iTA)","Very Good","Yes",,"1997 Mori-Seiki SL-200 Mitsubishi MSC-501
(18iTA)","L2150",$44500.00,"0","Yes","26.8""","9.3"" x
20.5""","4,000","2.56""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10177,"LATHES, CNC, 2-AXIS, UNIVERSAL","1980","Mori-Seiki","TL-5","Fanuc
6TA","Good","Yes",,"1980 Mori-Seiki TL-5 Fanuc
6TA","L2150",$9000.00,"-1","Yes","24.4""","8"" x
39""","2,500","2.5""","8","Swing","Travels","RPM","Bar Cap.","Stations"

10132,"LATHES, CNC, 2-AXIS, UNIVERSAL","1997","Mori-Seiki","SL-300 B /
700","Fanuc 18iTA","Needs Repair","Yes","18"" Swing, 27.9"" B.C., 2,500
RPM, 40 HP, 12 Sta. Turret, 12"" 3-Jaw Hydraulic Chuck,","1997
Mori-Seiki SL-300 B / 700 Fanuc
18iTA","L2150",$19500.00,"-1",,"18""","9.8"" x
27.5""","2,500","3.5""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

9968,"LATHES, CNC, 2-AXIS,
UNIVERSAL","1997","Mori-Seiki","SL-65B","Fanuc 18T","Good","Yes",,"1997
Mori-Seiki SL-65B Fanuc 18T","L2150",$179500.00,"0","Yes","35""","13.8""
x 33.9""","1,010","5.5""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10441,"LATHES, CNC, 2-AXIS,
UNIVERSAL","1998","Mori-Seiki","CL-200B","Mori-Seiki
MSC-803L","Good","Yes",,"1998 Mori-Seiki CL-200B Mori-Seiki
MSC-803L","L2150",$41000.00,"0","Yes","20.8""","9.25"" x
22.4""","3,500","2.5""","10","Swing","Travels","RPM","Bar
Cap.","Stations"

10384,"LATHES, CNC, 2-AXIS,
UNIVERSAL","1990","Mori-Seiki","SL-65B","Fanuc OT","Good","Yes",,"1990
Mori-Seiki SL-65B Fanuc OT","L2150",$89500.00,"0","Yes","35""","13.8"" x
33.9""","1,010","5.5""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

9786,"LATHES, CNC, 2-AXIS, UNIVERSAL","1984","Mori-Seiki","SL-1","Fanuc
6T","Good","No","16.5"" Swing, 6.2"" Max. Turning, 4,500 RPM, 10 HP, 8
Station Turret, Hydraulic Tailstock, 6"" Collet Chuck, RS-232 Port,
Turbo Chip Conveyor","1984 Mori-Seiki SL-1 Fanuc
6T","L2150",$10500.00,"-1","Yes","16.5""","2.7"" x
10.8""","4,500","1.2""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

9594,"LATHES, CNC, 2-AXIS, UNIVERSAL","1980","Mori-Seiki","LL-7B /
3000","Fanuc 6T","Good","Yes",,"1980 Mori-Seiki LL-7B / 3000 Fanuc
6T","L2150",$79500.00,"-1","Yes","42.9""","26.5"" x
120""","750","8""","8","Swing","Travels","RPM","Bar Cap.","Stations"

9381,"LATHES, CNC, 2-AXIS, UNIVERSAL","1986","Mori-Seiki","SL-3H","Fanuc
6T","Need Repair","No",,"1986 Mori-Seiki SL-3H Fanuc
6T","L2150",$8000.00,"-1","Yes","22.4""","8.45"" x
22""","4,000","2.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"

9367,"LATHES, CNC, 2-AXIS, UNIVERSAL","1981","Mori-Seiki","SL-7A","Fanuc
6T","Good","Yes","35.8"" Swing, 22.8"" SOC, 65"" Centers, 1,800 RPM, 12
Sta. Turret, 40 HP, 18"" 3-Jaw Hydraulic Chuck, Tailstock, Flood Coolant
System, Chip Conveyor","1981 Mori-Seiki SL-7A Fanuc
6T","L2150",$69500.00,"0","Yes","35.8""","15.75"" x
61.02""","1,800","4.13""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

9944,"LATHES, CNC, 2-AXIS, UNIVERSAL","2002","Okuma","Captain
L-370","OSP-E100L","Good","Yes","Swing Over Bed 20.8"", Swing Over
Saddle 16.54"", Maximum Turning Diameter 14.56"", Length 20"", 3,800
RPM, 30 HP, 12 Sta. Turret, Tailstock, Tool Presetter, 10"" 3-Jaw Chuck,
Chip Conveyor, One Touch IGF","2002 Okuma Captain L-370
OSP-E100L","L2150",$34500.00,"0","Yes","20.08""","10.23"" x
19.68""","4,500","2""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

8974,"LATHES, CNC, 2-AXIS, UNIVERSAL","1987","Okuma","LC-30 1SC /
1000","OSP-5000L","Good","Yes","19.69"" Swing, 17.72"" Turn Dia., 3,000
RPM, 40 HP, 12 Sta. VDI Turret, 12"" 3-Jaw Kitagawa Chuck, RS-232 Port,
Miscellaneous Tool Holders, Chip Conveyor, Coolant System, Machine
Rebuilt About Four (4) Years Ago - New Control, New Ball Screws, New
Hydraulic Kit In Tailstock, Wipers, Installed New VDI Turret","1987
Okuma LC-30 1SC / 1000
OSP-5000L","L2150",$29000.00,"-1","Yes","19.69""","11.42"" x
40.16""","3,000","2.5""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10339,"LATHES, CNC, 2-AXIS, UNIVERSAL","1993","Okuma","LB-15
II","OSP-5020L","Good","Yes",,"1993 Okuma LB-15 II
OSP-5020L","L2150",$18500.00,"0","Yes","20.87""","8.34"" x
20.47""","4,500","2.44""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

8260,"LATHES, CNC, 2-AXIS,
UNIVERSAL","1993","Okuma","LB-25","OSP-5020LG","Fair","Yes",,"1993 Okuma
LB-25 OSP-5020LG","L2150",$22500.00,"-1","Yes","24.43""","9.05"" x
35.59""","3,500","2.5""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

8325,"LATHES, CNC, 2-AXIS, UNIVERSAL","1993","Okuma and
Howa","ACT-20","Fanuc 18T","Very Good","Yes","20"" Swing, 13.3"" SOC,
11.81"" Turning Dia., 18"" Turning Length, 4,500 RPM, 2"" Bar Cap. 20
HP, 12 Station Turret, Tailstock, 8"" 3-Jaw Hydraulic Chuck, Chip
Conveyor, Parts Catcher, Barfeed Interface","1993 Okuma and Howa ACT-20
Fanuc 18T","L2150",$42000.00,"-1","Yes","19.68""","7.08"" x
18.11""","4,500","2.44""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

8324,"LATHES, CNC, 2-AXIS, UNIVERSAL","1996","Okuma and
Howa","ACT-35L","Fanuc 18T","Very Good","Yes","19.68""Swing, 17.25""SOC,
13.77"" Turning Dia., 48.6 Turning Length, 3,500 RPM, 3.125"" Bar Cap.
25 HP, 12 Station Turret, Programmable Tailstock Body & Quill, 12""
3-Jaw Hydraulic Chuck, Chip Conveyor, New X-Axis Ball Screw","1996 Okuma
and Howa ACT-35L Fanuc
18T","L2150",$62500.00,"-1","Yes","19.68""","7.87"" x
48.6""","3,500","3.125""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

8377,"LATHES, CNC, 2-AXIS, UNIVERSAL","2009","Poreba","PNA 80/4M","Fanuc
OiTC","New","Yes",,"2009 Poreba PNA 80/4M Fanuc
OiTC","L2150",$99500.00,"0","Yes","30""","15.3"" x
158""","1,200","6""","8","Swing","Travels","RPM","Bar Cap.","Stations"

9598,"LATHES, CNC, 2-AXIS, UNIVERSAL","2007","Poreba","BNC 26120
X","Fanuc OiTC","Very Good","Yes","26"" Swing, 2,400 RPM, 30 HP, 120"" x
26"", 4.1"" Spindle Bore, 8 Position Turret, Two (2) Steady Rests,
Tailstock, Coolant System, Guarding, 20"" 4-Jaw Chuck","2007 Poreba BNC
26120 X Fanuc OiTC","L2150",$79500.00,"0","Yes","26""","26"" x
120"":","2,400","4.1""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

8891,"LATHES, CNC, 2-AXIS, UNIVERSAL","2008","Poreba","PNA 60/2M","Fanuc
OiTC","New","Yes",,"2008 Poreba PNA 60/2M Fanuc
OiTC","L2150",$69500.00,"0","Yes","23.4""","8.3"" x
78.74""","2,400","4.1""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

9815,"LATHES, CNC, 2-AXIS, UNIVERSAL","2001","Romi","M-20","Fanuc
21iT","Excellent","Yes",,"2001 Romi M-20 Fanuc
21iT","L2150",$45000.00,"0","Yes","20.5""","11"" x
60""","2,200","3.15""","4","Swing","Travels","RPM","Bar Cap.","Stations"

10113,"LATHES, CNC, 2-AXIS, UNIVERSAL","2003","Romi","M-20","Fanuc
21iT","Very Good","Yes","20.5"" Swing, 17.2"" SOC, 10.2"" Tunr Dia.,
60"" Centers, 3,000 RPM, 2.56"" Spindle Bore, 15 HP, Quick Change Tool
Post, 12.5"" 3-Jaw Chuck, Conversational Program System, Constant
Surface Speed, Under 1,400 Cutting Hours","2003 Romi M-20 Fanuc
21iT","L2150",$39900.00,"-1","Yes","20.5""","11"" x
60""","3,000","2.56""","4","Swing","Travels","RPM","Bar Cap.","Stations"

10483,"LATHES, CNC, 2-AXIS, UNIVERSAL","2005","Romi","M-20","Fanuc
21iT","Like New","Yes",,"2005 Romi M-20 Fanuc
21iT","L2150",$64500.00,"0","Yes","20.47""","11.02"" x
60""","2,200","3.15""","4","Swing","Travels","RPM","Bar Cap.","Stations"

9597,"LATHES, CNC, 2-AXIS, UNIVERSAL",,"Stanko","CAK6163D","Fanuc
0iTC","Very Good","Yes","24.8"" Swing, 1,000 RPM, 5 HP, 112.2"" x 12.6""
Travels, 4.9"" Spindle Bore, 4 Position Turret, Two (2) Steady Rests,
Tailstock, Coolant System"," Stanko CAK6163D Fanuc
0iTC","L2150",$65000.00,"0","Yes","24.8""","12.6"" x
112.2""","1,000","4.9""","4","Swing","Travels","RPM","Bar
Cap.","Stations"

10596,"LATHES, CNC, 2-AXIS, UNIVERSAL","2000","Supermax","TC-36","Fanuc
18T","Very Good","Yes",,"2000 Supermax TC-36 Fanuc
18T","L2150",$39500.00,"0","Yes","27.16""","12.20"" x 49.21""","7 -
2,500","3.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"

5961,"LATHES, CNC, 2-AXIS, UNIVERSAL","1990","Timemaster","350
CNC","Fanuc OTA","Good","Yes",,"1990 Timemaster 350 CNC Fanuc
OTA","L2150",$82000.00,"0","Yes","29.5""","20.866"" x
81.125""","1,255","8.1""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

7750,"LATHES, CNC, 2-AXIS, UNIVERSAL","2008","Toolmex","TUR-930
MN/236","Fanuc 21iT","New","Yes",,"2008 Toolmex TUR-930 MN/236 Fanuc
21iT","L2150",$345000.00,"0","Yes","37.4""","19.3"" x
238""","1,200","5.5""","8","Swing","Travels","RPM","Bar Cap.","Stations"

10060,"LATHES, CNC, 2-AXIS, UNIVERSAL","2010","Willis","3280","Fanuc
OiTD","New","Yes",,"2010 Willis 3280 Fanuc
OiTD","L2150",$201500.00,"0","Yes","31.5""","21"" x
72""","600","10""","8 / 4","Swing","Travels","RPM","Bar Cap.","Stations"

10038,"LATHES, CNC, 2-AXIS, UNIVERSAL","2010","Willis","32120","Fanuc
OiTC","New","Yes",,"2010 Willis 32120 Fanuc
OiTC","L2150",$224900.00,"-1","Yes","31.5""","21"" x
112""","600","12""","8 / 4","Swing","Travels","RPM","Bar
Cap.","Stations"

10012,"LATHES, CNC, 2-AXIS, UNIVERSAL","1997","Yang","SML-20","Fanuc
OiTD","Very Good","Yes",,"1997 Yang SML-20 Fanuc
OiTD","L2150",$27500.00,"0","Yes","18.9""","8.45"" x
20""","4,000","2.4""","8","Swing","Travels","RPM","Bar Cap.","Stations"

9771,"LATHES, CNC, 2-AXIS, W- SUB-SPINDLE","1999","Daewoo","Puma-250
SB","Fanuc 18T","Good","Yes",,"1999 Daewoo Puma-250 SB Fanuc
18T","L2125S",$34500.00,"0","Yes","22.4""","7.87"" x
26.77""","4,000","3.03""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10289,"LATHES, CNC, 2-AXIS, W- SUB-SPINDLE","1999","Daewoo","Puma-250
SB","Fanuc 18T","Very Good","Yes",,"1999 Daewoo Puma-250 SB Fanuc
18T","L2125S",,"-1","On Way","22.4""","7.87"" x
6.99""","4,000","1.5""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

8888,"LATHES, CNC, 2-AXIS, W- SUB-SPINDLE","2000","Mazak","Super Quick
Turn-250S","Mazatrol Fusion 640T","Very Good","Yes",,"2000 Mazak Super
Quick Turn-250S Mazatrol Fusion
640T","L2125S",$79500.00,"0","Yes","20.67""","7.5"" x
20.9""","4,000","2.5""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10529,"LATHES, CNC, 2-AXIS, W- SUB-SPINDLE","2002","Okuma","Captain
L-370 W","OSP-E100L","Very Good","Yes",,"2002 Okuma Captain L-370 W
OSP-E100L","L2125S",$69500.00,"0","Yes","20.08""","10.23"" x
20.47""","4,500","2.5""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10181,"LATHES, CNC, 2-AXIS, W- SUB-SPINDLE","1995","Okuma","Cadet LNC-8
W","OSP-5020L","Good","Yes",,"1995 Okuma Cadet LNC-8 W
OSP-5020L","L2125S",$32500.00,"0","Yes","15.75""","6.89"" x
16.53""","3,500","1.77""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

9666,"LATHES, CNC, 3-AXIS, CHUCKER
W-MILLING","2008","Doosan","Puma-V-550M","Fanuc 21iTB","Like
New","Yes",,"2008 Doosan Puma-V-550M Fanuc
21iTB","L2125M",$225000.00,"0","Yes","31.5""","15.4"" x
31""","2,000","1.75""","10","Swing","Travels","RPM","Bar
Cap.","Stations"

9356,"LATHES, CNC, 3-AXIS, UNIVERSAL
W-MILLING","2002","Akira-Seiki","SLC-35","Fanuc OTC","Very
Good","Yes",,"2002 Akira-Seiki SLC-35 Fanuc
OTC","L2150M",$52000.00,"0","Yes","25""","8"" x
23.2""","4,000","3.03""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

8239,"LATHES, CNC, 3-AXIS, UNIVERSAL
W-MILLING","2008","Amera-Seiki","T-310 MC","Fanuc 0iTC","Like
New","Yes",,"2008 Amera-Seiki T-310 MC Fanuc
0iTC","L2150M",$96000.00,"-1","Yes","23.6""","8.85"" x
30.31""","4,200","3.03""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

9793,"LATHES, CNC, 3-AXIS, UNIVERSAL
W-MILLING","2008","Amera-Seiki","T-312 MC","Fanuc
0iTC","New","Yes",,"2008 Amera-Seiki T-312 MC Fanuc
0iTC","L2150M",$99900.00,"-1","Yes","23.6""","8.85"" x
30""","3,400","3.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"

10284,"LATHES, CNC, 3-AXIS, UNIVERSAL
W-MILLING","2007","Doosan","Puma-280 LM","Fanuc 21iTB","Very
Good","Yes",,"2007 Doosan Puma-280 LM Fanuc
21iTB","L2150M",$80000.00,"0","Yes","23""","11.1"" x
36.8""","2,800","3""","12","Swing","Travels","RPM","Bar Cap.","Stations"

9525,"LATHES, CNC, 3-AXIS, UNIVERSAL
W-MILLING","1995","Hitachi-Seiki","Hi-Cell CA-23","Seicos Sigma
LIII","Good","Yes",,"1995 Hitachi-Seiki Hi-Cell CA-23 Seicos Sigma
LIII","L2150M",$32500.00,"0","Yes","17.3""","8.5"" x
20.9""","4,000","2.5""","16","Swing","Travels","RPM","Bar
Cap.","Stations"

10003,"LATHES, CNC, 3-AXIS, UNIVERSAL
W-MILLING","2001","Mazak","Integrex 400 SYB","Mazatrol Fusion 640
MT","Very Good","Yes",,"2001 Mazak Integrex 400 SYB Mazatrol Fusion 640
MT","L2150M",$198000.00,"0","Yes","24.01""","22.83"" x
43.11""","3,000","3.03""","40","Swing","Travels","RPM","Bar
Cap.","Stations"

9542,"LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING","1985","Mazak","Slant
Turn-60 Mill Center","Mazatrol T-1","Good","Yes",,"1985 Mazak Slant
Turn-60 Mill Center Mazatrol
T-1","L2150M",$69500.00,"0","Yes","36.02""","25.39"" x
80.12""","750","6""","15","Swing","Travels","RPM","Bar Cap.","Stations"

8510,"LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING","1997","Mazak","Super
Quick Turn-15M II","Mazatrol T-PLUS","Need Repiar","Yes",,"1997 Mazak
Super Quick Turn-15M II Mazatrol
T-PLUS","L2150M",$39500.00,"0","Yes","20.91""","7.125"" x
22.75""","4,000","2""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

6234,"LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING","1995","Mazak","Integrex
30 / 1000","Mazatrol T-PLUS","Good","Yes","Swing 20"", Swing Over Cross
Slide 15.75"", Maximum Turning Diameter 20"", Length 40"", 3,500 RPM, 35
HP, 20 Sta. ATC, 40 Taper, 10"" 3-Jaw Chuck, Chip Conveyor, Coolant
Through Milling Head, User Macros, Fully Programmable Tailstock Body and
Quill, Automatic Tool Eye, EIA / ISO Input Function","1995 Mazak
Integrex 30 / 1000 Mazatrol
T-PLUS","L2150M",$72000.00,"-1","Yes","20""","22.83"" x
42""","3,500","3.03""","20","Swing","Travels","RPM","Bar
Cap.","Stations"

10572,"LATHES, CNC, 3-AXIS, UNIVERSAL
W-MILLING","2000","Mazak","Integrex 70YB","Mazatrol Fusion 640 MT","Very
Good","Yes",,"2000 Mazak Integrex 70YB Mazatrol Fusion 640
MT","L2150M",$295000.00,"0","Yes","36""","29.72"" x
122.91","1,300","6.5""","80","Swing","Travels","RPM","Bar
Cap.","Stations"

10608,"LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING","2000","Mazak","Super
Quick Turn-200M","Mazatrol Fusion 640 T","Very Good","Yes",,"2000 Mazak
Super Quick Turn-200M Mazatrol Fusion 640
T","L2150M",$69750.00,"0","Yes","20.67""","7.48"" x
22.64""","5,000","2","12","Swing","Travels","RPM","Bar Cap.","Stations"

10594,"LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING","2007","Mazak","Nexus
Super Quick Turn-250MY","Mazatrol Matrix","Very Good","Yes",,"2007 Mazak
Nexus Super Quick Turn-250MY Mazatrol
Matrix","L2150M",$121500.00,"0","Yes","26.5""","9"" x
21.28""","4,000","3""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10340,"LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING","1989","Mazak","Slant
Turn-40 N ATC M/C","Fanuc 11T","Good","Yes",,"1989 Mazak Slant Turn-40 N
ATC M/C Fanuc 11T","L2150M",$39500.00,"0","Yes","21.25""","21.65"" x
83.4""","2,200","2.5""","80","Swing","Travels","RPM","Bar
Cap.","Stations"

8685,"LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING","1997","Mazak","Integrex
50Y / 1500","Mazatrol T-PLUS","Good","Yes",,"1997 Mazak Integrex 50Y /
1500 Mazatrol T-PLUS","L2150M",$199500.00,"0","Yes","27.95""","25.39"" x
63.46"" x 4.13""","3,000","2.71""","80","Swing","Travels","RPM","Bar
Cap.","Stations"

10152,"LATHES, CNC, 3-AXIS, UNIVERSAL
W-MILLING","2004","Mori-Seiki","Super Hi-Cell CH-250","Seicos
18iTB","Very Good","Yes","Swing 19.68"", Swing Over Cross Slide 19.68"",
Maximum Turning Diameter 19.68"", Length 28.3"", 4,000 RPM, 25 HP, 20
Sta. ATC, 10"" 3-Jaw Chuck & 8""-3-Jaw Chucks, Tool Presetter, Various
Tool Holders","2004 Mori-Seiki Super Hi-Cell CH-250 Seicos
18iTB","L2150M",$125000.00,"-1","Yes","19.68""","23.6"" x 39.3"" x
6""","4,000","2.5""","20","Swing","Travels","RPM","Bar Cap.","Stations"

8263,"LATHES, CNC, 3-AXIS, UNIVERSAL
W-MILLING","1996","Mori-Seiki","MT-25B","Fanuc MF-T6","Very
Good","Yes",,"1996 Mori-Seiki MT-25B Fanuc
MF-T6","L2150M",$119500.00,"0","Yes","46.85""","17.72"" x 45.28"" x
11.81""","3,500","3.5""","30","Swing","Travels","RPM","Bar
Cap.","Stations"

10274,"LATHES, CNC, 3-AXIS, UNIVERSAL
W-MILLING","2005","Mori-Seiki","NL-2500 MC / 700","Mori-Seiki
MSX-850","Good","Yes",,"2005 Mori-Seiki NL-2500 MC / 700 Mori-Seiki
MSX-850","L2150M",$119500.00,"0","Yes","36.37""","10.24"" x
31.3""","4,000","3.1""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

9964,"LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING","2002","Okuma","Captain
L-470M / 650","OSP-E100L","Good","Yes",,"2002 Okuma Captain L-470M / 650
OSP-E100L","L2150M",$89500.00,"0","Yes","24.4""","11.81"" x
26.57""","3,000","3.5""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

7663,"LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING","2000","Okuma and
Howa","HL-35M","Fanuc 18iT","Very Good","Yes",,"2000 Okuma and Howa
HL-35M Fanuc 18iT","L2150M",$42500.00,"0","Yes","19.69""","7.87"" x
24.02""","3,500","3.06""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

8458,"LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING","1999","Tacchi","71"" x
551""","Fanuc 16iT","Very Good","Yes",,"1999 Tacchi 71"" x 551"" Fanuc
16iT","L2150M",$950000.00,"0","Yes","71""","39"" x
551""","600","5.9""","12","Swing","Travels","RPM","Bar Cap.","Stations"

6309,"LATHES, CNC, 3-AXIS, W-MILLING and
SUB-SPINDLE","1999","Daewoo","Puma-200L MSC","Fanuc
18T","Good","Yes",,"1999 Daewoo Puma-200L MSC Fanuc
18T","L2125MS",$79500.00,"0","Yes","20.1""","5.91"" x
22.83""","4,500","2.66""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10436,"LATHES, CNC, 3-AXIS, W-MILLING and
SUB-SPINDLE","2001","Daewoo","Puma-230 MSB","Fanuc 18i","Very
Good","Yes",,"2001 Daewoo Puma-230 MSB Fanuc
18i","L2125MS",$99500.00,"0","Yes","21.65""","8.07"" x
22.83""","6,000","2.56""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

9910,"LATHES, CNC, 3-AXIS, W-MILLING and
SUB-SPINDLE","2005","Doosan","Puma-240 MSC","Fanuc 18iTB","Very
Good","Yes",,"2005 Doosan Puma-240 MSC Fanuc
18iTB","L2125MS",$75000.00,"-1","Yes","21.65""","8.07"" x
22.83""","3,500","2.56""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10621,"LATHES, CNC, 3-AXIS, W-MILLING and
SUB-SPINDLE","1993","Hardinge","Conquest T-42","Fanuc
18T","Good","Yes",,"1993 Hardinge Conquest T-42 Fanuc
18T","L2125MS",$57500.00,"0","Yes","21.2""","5.45"" x
13.65""","5,000","1.625""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10045,"LATHES, CNC, 3-AXIS, W-MILLING and
SUB-SPINDLE","2000","Hwacheon","ECO 21HS-S-MC","Fanuc
18T","Good","Yes",,"2000 Hwacheon ECO 21HS-S-MC Fanuc
18T","L2125MS",$39500.00,"0","Yes","23.6""","6.8"" x
17.9""","4,000","2""","12","Swing","Travels","RPM","Bar Cap.","Stations"

10541,"LATHES, CNC, 3-AXIS, W-MILLING and
SUB-SPINDLE","2007","Kia","Super Kia Turn-21 LMS","Fanuc
OiTB","Excellent","Yes",,"2007 Kia Super Kia Turn-21 LMS Fanuc
OiTB","L2125MS",$99500.00,"0","Yes","21.7""","8.7"" x
21.7""","4,000","2.56""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10355,"LATHES, CNC, 3-AXIS, W-MILLING and
SUB-SPINDLE","1998","Mazak","Super Quick Turn-200MS","Mazatrol
T-PLUS","Good","Yes",,"1998 Mazak Super Quick Turn-200MS Mazatrol
T-PLUS","L2125MS",$49500.00,"0","Yes","20.67""","7.5"" x
22.62""","4,500","2.01""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10141,"LATHES, CNC, 3-AXIS, W-MILLING and
SUB-SPINDLE","2006","Mazak","Integrex 300 III ST","Mazatrol Fusion 640
MT Pro","Very Good","Yes",,"2006 Mazak Integrex 300 III ST Mazatrol
Fusion 640 MT Pro","L2125MS",$315000.00,"0","Yes","33.5""","24.8"" x
62.41"" x 4.53""","4,000","3""","40","Swing","Travels","RPM","Bar
Cap.","Stations"

7784,"LATHES, CNC, 3-AXIS, W-MILLING and
SUB-SPINDLE","2003","Mazak","Super Quick Turn-100MSY","Mazatrol Fusion
640 MT","Very Good","Yes",,"2003 Mazak Super Quick Turn-100MSY Mazatrol
Fusion 640 MT","L2125MS",$116000.00,"0","Yes","21.65""","7.25"" x
17.875"" x 4""","6,000","2""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

9753,"LATHES, CNC, 3-AXIS, W-MILLING and
SUB-SPINDLE","1994","Miyano","BND-34S","Fanuc 0TC/CRT",,"Yes","2.95""
Swg, 10 HP, 8 Turning / 4 Live Tool Turret, Collet Chucks, Parts
Conveyor, 12' LNS Five Tube Barfeed","1994 Miyano BND-34S Fanuc
0TC/CRT","L2125MS",,"-1","On Way","4.75""","5.50"" x
11.25""","5,000","1.34""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

9714,"LATHES, CNC, 3-AXIS, W-MILLING and
SUB-SPINDLE","1998","Miyano","BNE-46S","Fanuc 18T","Very
Good","Yes",,"1998 Miyano BNE-46S Fanuc
18T","L2125MS",$57500.00,"0","Yes","18""","5.9"" x
15""","4,000","1.81""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10260,"LATHES, CNC, 3-AXIS, W-MILLING and
SUB-SPINDLE","2002","Mori-Seiki","MT-2002SZ","Fanuc 18iT","Very
Good","Yes",,"2002 Mori-Seiki MT-2002SZ Fanuc
18iT","L2125MS",$99500.00,"0","Yes","33.46""","22.2"" x
42.4""","4,500","2.5""","20","Swing","Travels","RPM","Bar
Cap.","Stations"

10624,"LATHES, CNC, 3-AXIS, W-MILLING and
SUB-SPINDLE","2007","Mori-Seiki","NL-2500 SMC / 700","Mori-Seiki MSX-850
III","Very Good","Yes",,"2007 Mori-Seiki NL-2500 SMC / 700 Mori-Seiki
MSX-850 III","L2125MS",$126000.00,"0","Yes","36.37""","10.24"" x
23.2""","6,000","2.5""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10087,"LATHES, CNC, 3-AXIS, W-MILLING and
SUB-SPINDLE","2002","Mori-Seiki","SL-204 SMC","Mitsubishi
MSG-805","Excellent","Yes",,"2002 Mori-Seiki SL-204 SMC Mitsubishi
MSG-805","L2125MS",$105000.00,"-1","Yes","26.8""","9.3"" x
22""","4,500","2.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"

9337,"LATHES, CNC, 3-AXIS, W-MILLING and
SUB-SPINDLE","1999","Mori-Seiki","SL-200 SMC","Mitsubishi MSC-501
(18iTA)","Good","Yes",,"1999 Mori-Seiki SL-200 SMC Mitsubishi MSC-501
(18iTA)","L2125MS",$79900.00,"0","Yes","26.77""","7.87"" x
52.36""","4,000","2.1""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10086,"LATHES, CNC, 3-AXIS, W-MILLING and
SUB-SPINDLE","2008","Mori-Seiki","NL-2500 SMC / 700","Mori-Seiki MSX-850
MB","Excellent","Yes",,"2008 Mori-Seiki NL-2500 SMC / 700 Mori-Seiki
MSX-850 MB","L2125MS",$159900.00,"-1","Yes","36.37""","14"" x
28.9""","4,000","3.1""","12","Swing","Travels","RPM","Bar
Cap.","Stations"

10050,"LATHES, CNC, 3-AXIS, W-MILLING and
SUB-SPINDLE","2002","Okuma","Captain L-370 MW
BB","OSP-E100L","Good","Yes",,"2002 Okuma Captain L-370 MW BB
OSP-E100L","L2125MS",$79500.00,"0","Yes","20.08""","7.12"" x
24.5""","3,800","3""","12","Swing","Travels","RPM","Bar Cap.","Stations"

8634,"LATHES, CNC, 4-AXIS,
CHUCKER","2006","Amera-Seiki","TS-42","Mitsubishi
64SM","Demo","Yes",,"2006 Amera-Seiki TS-42 Mitsubishi
64SM","L21254",$55000.00,"-1","Yes","12.59""","5.65"" x
14.3""","4,000","1.625""","13","Swing","Travels","RPM","Bar
Cap.","Stations"

9296,"LATHES, CNC, 4-AXIS, CHUCKER","2003","Kitako","MT4-200","Fanuc
18iTA","Good","Yes","Maximum Turning Diameter 7.8"", Maximum Turning
Length 3.9"", 4,000 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10""
3-Jaw Chucks, Air Blow, Chip Conveyor, Coolant System","2003 Kitako
MT4-200 Fanuc 18iTA","L21254",$139500.00,"0","Yes","7.8""","6.3"" x
9.84""","4,000","1.35""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

10398,"LATHES, CNC, 4-AXIS, CHUCKER","2006","Kitako","MT4-200","Fanuc
18iTB","Very Good","Yes",,"2006 Kitako MT4-200 Fanuc
18iTB","L21254",$185000.00,"0","Yes","7.8""","6.3"" x
9.84""","4,000","1.35""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

8809,"LATHES, CNC, 4-AXIS, CHUCKER","1996","Kitako","MT4-200","Fanuc
18T","Good","Yes","Maximum Turning Diameter 7.8"", Maximum Turning
Length 3.9"", 3,200 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10""
3-Jaw Chucks, Transformer, Chip Conveyor, Mist Collector","1996 Kitako
MT4-200 Fanuc 18T","L21254",$46500.00,"-1","Yes","7.8""","6.3"" x
9.84""","3,200","1.35""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

8810,"LATHES, CNC, 4-AXIS, CHUCKER","1995","Kitako","MT4-200","Fanuc
18T","Good","Yes","Maximum Turning Diameter 7.8"", Maximum Turning
Length 3.9"", 3,200 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10""
3-Jaw Chucks, Transformer, Chip Conveyor, Mist Collector","1995 Kitako
MT4-200 Fanuc 18T","L21254",$46500.00,"-1","Yes","7.8""","6.3"" x
9.84""","3,200","1.35""","16","Swing","Travels","RPM","Bar
Cap.","Stations"

9295,"LATHES, CNC, 4-AXIS, CHUCKER","2003","Kitako","MT4-200","Fanuc
18iTA","Good","Yes","Maximum Turning Diameter 7.8"", Maximum Turning
Length 3.9"", 4,000 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10""
3-Jaw Chucks, Air Blow, Chip Conveyor, Coolant System","2003 Kitako
MT4-200 Fanuc 18iTA","L21254",$139500.00,"0","Yes","7.8""","6.3"" x
9.84""","4,000","1.35""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

8998,"LATHES, CNC, 4-AXIS, CHUCKER","1997","Murata","MW-300G","Fanuc
16TT","Good","Yes","11.6"" Swing, 13.385 Distance Between Spindle, 6,000
RPM, 14 HP,8 Sta. Turrets, Two 6"" 2-Jaw Hydraulic Chucks, Chip
Conveyor, Two Multi-Position Indexing Gantry Loader With Turn Around
Stations, Right Hand or Left Discharge Available, Machine Sat Idle For
Eight (8) Years - Recently Gone Through","1997 Murata MW-300G Fanuc
16TT","L21254",$59500.00,"0","Yes","11.8""","5.11"" x
5.7""","6,000","2.87""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

9954,"LATHES, CNC, 4-AXIS, CHUCKER","1997","Okuma","LU-35
BB","OSP-7000L","Very Good","Yes",,"1997 Okuma LU-35 BB
OSP-7000L","L21254",$123000.00,"-1","Yes","29.13""","14.96"" x
36.22""","2,800","3.62""","22","Swing","Travels","RPM","Bar
Cap.","Stations"

9029,"LATHES, CNC, 4-AXIS, CHUCKER","1978","Warner and
Swasey","2-SC-15","Allen Bradley 7360","Good","No","17 3/8"" Swing,
1,178 RPM, 4.5"" Spindle Bore, 50 HP, Twin Turret, 15"" 3-Jaw Hydraulic
Chuck, Chip Conveyor, Steady Rest, Miscellaneous Tooling, Manuals,
Behind the Tape Reader","1978 Warner and Swasey 2-SC-15 Allen Bradley
7360","L21254",$8000.00,"-1","No","17 3/8""","7 3/4"" x 54
7/8""","1,178","4.5""","11","Swing","Travels","RPM","Bar
Cap.","Stations"

9897,"LATHES, CNC, 4-AXIS, UNIVERSAL","1996","Mori-Seiki","ZL-25 /
500","Fanuc MF-D6","Good","Yes",,"1996 Mori-Seiki ZL-25 / 500 Fanuc
MF-D6","L21504",$49500.00,"0","Yes","20.47""","6.3"" x
23.23""","3,500","2.8""","18","Swing","Travels","RPM","Bar
Cap.","Stations"

8590,"LATHES, CNC, 4-AXIS, UNIVERSAL","1985","Okuma","LC-40
2ST","OSP-5000LG","Good","Yes",,"1985 Okuma LC-40 2ST
OSP-5000LG","L21504",$18500.00,"0","Yes","23.62""","11.22"" x
41.34""","2,500","3""","20","Swing","Travels","RPM","Bar
Cap.","Stations"

10607,"LATHES, CNC, 4-AXIS,
UNIVERSAL","1996/2010","Okuma","LOC-650","OSP-E100L","Like
New","Yes",,"1996/2010 Okuma LOC-650
OSP-E100L","L21504",$575000.00,"0","Yes","31""","35.5"" x
80.31""","500","14.76""","12 / 12","Swing","Travels","RPM","Bar
Cap.","Stations"

10271,"LATHES, CNC, 4-AXIS, UNIVERSAL","1986","Okuma","LC-50 2ST
1250","OSP-5020L","Very Good","Yes",,"1986 Okuma LC-50 2ST 1250
OSP-5020L","L21504",$68000.00,"0","Yes","36.9""","12.99"" x
46""","1,000","7.87""","20","Swing","Travels","RPM","Bar
Cap.","Stations"

10120,"LATHES, ENGINE",,"Dong Yang","LS",,"Very Good","Yes",," Dong Yang
LS ","L3000",,"-1","Yes","20""","60""","1,800","1
3/4""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

9972,"LATHES, ENGINE","1982","Geminis","GE-1200-S-3G",,"Very
Good","Yes",,"1982 Geminis GE-1200-S-3G
","L3000",$159500.00,"0","Yes","47.24""","315""","280","6""","Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

9991,"LATHES, ENGINE","1993","Hermes","34"" x 200""",,"Very
Good","Yes",,"1993 Hermes 34"" x 200""
","L3000",$39500.00,"0","Yes","34""","200""","670","6
1/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

9047,"LATHES, ENGINE","1978","Kingston","HL-2500",,"Good","Yes",,"1978
Kingston HL-2500
","L3000",$12500.00,"-1","Yes","21""","100""","2,500","3
1/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

7996,"LATHES, ENGINE","1978","Kingston","HLC-1860",,"Very
Good","Yes",,"1978 Kingston HLC-1860
","L3000",$14500.00,"-1","Yes","18""","60""","1,500","3.14""","Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

10111,"LATHES, ENGINE","2000","Lansing","52"" x 120""",,"Very
Good","Yes",,"2000 Lansing 52"" x 120""
","L3000",$300000.00,"0","Yes","52""","120""","700","25""","Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

8259,"LATHES, ENGINE",,"Lansing","48"" x 120""",,"Good","Yes",," Lansing
48"" x 120"" ","L3000",$45000.00,"0","Yes","48""","120""","600","4
3/4""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

8497,"LATHES, ENGINE","1966","Leblond","2516",,"Very Good","Yes",,"1966
Leblond 2516 ","L3000",$37500.00,"0","Yes","25""","165""","1,500","1
3/4""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

10597,"LATHES, ENGINE",,"Leblond","Model NI",,"Very Good","Yes",,"
Leblond Model NI
","L3000",$24500.00,"0","Yes","31""","52""","600","2.25""","Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

10312,"LATHES, ENGINE","1956","Leblond","20"" x
126""",,"Good","Yes","Swing Over Bed 20"", Swing Over Saddle 15 1/4"",
Maximum Turning Length 126"", 2,000 RPM, 20 HP, Tailstock,15"" 3-Jaw
Chuck, 18"" 4-Jaw Chuck, Aloris Tool Post, Inch / Metric Threading,
Taper Attachment, Thread Dial Gear Stripped on Carriage","1956 Leblond
20"" x 126"" ","L3000",$9500.00,"-1","Yes","20""","126""","2,000","1
3/4""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

9555,"LATHES, ENGINE","1974","Leblond","Regal",,"Very Good","Yes",,"1974
Leblond Regal
","l3000",$39500.00,"0","Yes","26""","96""","400","9""","No","Swing","Centers","RPM","Bar
Cap.","Threading"

9522,"LATHES, ENGINE","1956","Leblond","Regal Servo-Shift",,"Very
Good","Yes","Swing Over Bed 19"", Swing Over Saddle 11 1/4"", Maximum
Turning Length 78"", 1,800 RPM, 5 HP, Tailstock, 12"" 4-Jaw Chuck, 10""
3-Jaw Chuck, 16"" Face Plate, Flex Collet Head, Follow Rest, Inch /
Metric Threading, Servo Shift Controls, Aloris Tool Post,
Trav-a-Dial","1956 Leblond Regal Servo-Shift
","L3000",$9500.00,"-1","Yes","19""","78""","1,800","1
3/4""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

10311,"LATHES, ENGINE","1956","Leblond","16"" x
54""",,"Good","Yes","Swing Over Bed 16"", Swing Over Saddle 10 1/4"",
Maximum Turning Length 54"", 2,000 RPM, 20 HP, Tailstock,15.5"" 4-Jaw
Chuck, 15.5"" 3-Jaw Chuck, Inch Threading, Aloris Tool Post","1956
Leblond 16"" x 54""
","L3000",$8000.00,"-1","Yes","16""","54""","2,000","1
3/4""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

8470,"LATHES, ENGINE","1982","Leblond","26"" x 72""",,"Very
Good","Yes",,"1982 Leblond 26"" x 72""
","L3000",$65000.00,"0","Yes","26""","72""","600","9
1/4""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

10299,"LATHES, ENGINE","2003","Lion","31"" x 120""",,"Very
Good","Yes",,"2003 Lion 31"" x 120""
","L3000",$59500.00,"0","Yes","31""","120""","315","14""","Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

7742,"LATHES, ENGINE","1965","Lodge and Shipley","3220 Magna
Turn",,"Good","Yes",,"1965 Lodge and Shipley 3220 Magna Turn
","L3000",$59500.00,"0","No","38""","240""","875","3
5/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

9196,"LATHES, ENGINE","1978","Lodge and Shipley","2XE
3220",,"Good","Yes",,"1978 Lodge and Shipley 2XE 3220
","L3000",$49500.00,"0","Yes","34
1/2""","144""","850","7""","Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

9566,"LATHES, ENGINE",,"Lodge and Shipley","34"" x 100""",,"Very
Good","Yes",," Lodge and Shipley 34"" x 100""
","L3000",$37500.00,"0","Yes","34""","100""","451","8
7/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

9563,"LATHES, ENGINE","1951","Lodge and Shipley","37"" x 100""",,"Very
Good","Yes",,"1951 Lodge and Shipley 37"" x 100""
","L3000",$49500.00,"0","Yes","37""","100""","451","8
7/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

9164,"LATHES, ENGINE","1978","Mazak","Junior",,"Very Good","Yes",,"1978
Mazak Junior ","L3000",$9900.00,"0","Yes","18""","40""","1,500","3
1/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

9871,"LATHES, ENGINE",,"Mazak","HD-34",,"Very Good","Yes",," Mazak HD-34
","L3000",$37500.00,"0","Yes","34""","120""","1,200","4""","Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

8920,"LATHES, ENGINE","1975","Meuser","66"" x 384""",,"Very
Good","Yes",,"1975 Meuser 66"" x 384""
","L3000",$265000.00,"0","Yes","66""","384""","400","4
1/2""","No","Swing","Centers","RPM","Bar Cap.","Threading"

8838,"LATHES, ENGINE","1968","Meuser","M-IV-5",,"Very
Good","Yes","36.5"" Swing, 26.5"" SOC, 360"" Centers, 15 HP, Inch Metric
Threading, Four (4) Way Tool Post, Three (3) Steady Rests","1968 Meuser
M-IV-5 ","L3000",$65000.00,"-1","Yes","36.5""","360""","710","3
5/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

8507,"LATHES, ENGINE",,"Meuser","32"" x 120""",,"Good","Yes",," Meuser
32"" x 120"" ","L3000",$19500.00,"0","Yes","32""","120""","900","2
5/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

10010,"LATHES, ENGINE","1955","Monarch","32NN",,"Good","Yes",,"1955
Monarch 32NN
","L3000",$59500.00,"0","Yes","41""","336""","450","2.25""","Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

8782,"LATHES, ENGINE","1952","Monarch","Model 25N",,"Good","Yes",,"1952
Monarch Model 25N
","L3000",$35000.00,"0","Yes","36.5""","216""","405","2.2""","Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

10298,"LATHES, ENGINE",,"Monarch","24N",,"Fair","Yes",," Monarch 24N
","L3000",$8500.00,"0","Yes","27""","156""","303","3
3/4""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

9872,"LATHES, ENGINE","1952","Monarch","25N",,"Good","Yes",,"1952
Monarch 25N
","L3000",$29500.00,"0","Yes","36.5""","216""","405","2.2""","Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

7423,"LATHES, ENGINE",,"Niles","AP48H-M67",,"Good","Yes",," Niles
AP48H-M67 ","L3000",$42500.00,"0","Yes","52""","240""","100","1
3/4""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

9994,"LATHES, ENGINE","1983","Niles","78"" x 240""",,"Good","Yes",,"1983
Niles 78"" x 240"" ","L3000",$94500.00,"0","Yes","78""","240""","355","8
1/2""","No","Swing","Centers","RPM","Bar Cap.","Threading"

8428,"LATHES, ENGINE",,"Niles","40"" x 300""",,"Fair","Yes",," Niles
40"" x 300"" ","L3000",$34500.00,"0","Yes","40""","300""","240","3
3/4""","No","Swing","Centers","RPM","Bar Cap.","Threading"

9606,"LATHES, ENGINE",,"Niles","110"" x 348""",,"Good","Yes",," Niles
110"" x 348""
","L3000",$69500.00,"0","No","110""","348""","80.1","9.5""","Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

8786,"LATHES, ENGINE",,"Niles","40"" x 25'",,"Good","Yes",," Niles 40""
x 25' ","L3000",$34500.00,"0","Yes","40""","300""","241","1
3/4""","No","Swing","Centers","RPM","Bar Cap.","Threading"

8901,"LATHES, ENGINE",,"Niles","72"" x 324""",,"Good","Yes",," Niles
72"" x 324""
","L3000",$49500.00,"0","Yes","76""","324""","2,000","5.6""","Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

8152,"LATHES, ENGINE","1988","Poreba","TPK-90 / 2M",,"Very
Good","Yes",,"1988 Poreba TPK-90 / 2M
","L3000",$35000.00,"0","Yes","36""","78""","1,000","3
7/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

9489,"LATHES, ENGINE","2006","Potisje","PA 1000 DC",,"Like
New","Yes",,"2006 Potisje PA 1000 DC
","L3000",$129000.00,"0","Yes","40""","72""","800","5
1/2""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

9867,"LATHES, ENGINE","1997","Ryazan","16K40",,"Very Good","Yes",,"1997
Ryazan 16K40
","L3000",$31500.00,"0","Yes","33.07""","118""","1,250","4.13""","Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

9167,"LATHES, ENGINE","1992","Summit","16"" x
40""",,"Excellent","Yes",,"1992 Summit 16"" x 40""
","L3000",$10500.00,"0","Yes","16""","40""","1,800","3""","Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

10523,"LATHES, ENGINE","1977","Summit","33"" x 120""",,"Very
Good","Yes",,"1977 Summit 33"" x 120""
","L3000",$24950.00,"0","Yes","33""","120""","1,010","4
1/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

8059,"LATHES, ENGINE",,"T and B","24"" x 120""",,"Good","Yes",," T and B
24"" x 120"" ","L3000",$15500.00,"0","Yes","24""","126""","600","4
1/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

8494,"LATHES, ENGINE","1993","Tarnow","TUJ-50M",,"Very
Good","Yes",,"1993 Tarnow TUJ-50M
","L3000",$29500.00,"0","Yes","22""","170""","1,600","3
1/2""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

8498,"LATHES,
ENGINE","2000","Tos","SN-71C/4000",,"Excellent","Yes",,"2000 Tos
SN-71C/4000
","L3000",$25500.00,"0","Yes","28""","160""","1,000","2.8""","Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

9973,"LATHES, ENGINE","1969","Tos","SU-63",,"Good","Yes",,"1969 Tos
SU-63 ","L3000",$29500.00,"0","Yes","25""","260""","1,180","2
3/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

8058,"LATHES, ENGINE","1995","Tru-Turn","CW6280",,"Very
Good","Yes",,"1995 Tru-Turn CW6280
","L3000",$19500.00,"0","Yes","31.5""","120""","1,000","4
1/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

9178,"LATHES, ENGINE","1981","Tuda","Oilstar 10120",,"Very
Good","Yes",,"1981 Tuda Oilstar 10120
","L3000",$69500.00,"0","Yes","41.33""","72""","350","10
1/4""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

8791,"LATHES, ENGINE","1966","VDF","S-500",,"Good","Yes",,"1966 VDF
S-500 ","L3000",$12500.00,"0","Yes","21""","86""","2,800","3
1/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

8728,"LATHES, ENGINE",,"VDF","S-500",,"Very Good","Yes",," VDF S-500
","L3000",$37500.00,"0","Yes","20""","240""","1,800","4""","Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

8722,"LATHES, ENGINE",,"VDF","35"" x 120""",,"Good","Yes",," VDF 35"" x
120"" ","L3000",$23500.00,"0","Yes","35""","120""","1,000","3
3/4""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"

8790,"LATHES, ENGINE",,"VDF Boehringer","20"" x 84""",,"Good","Yes",,"
VDF Boehringer 20"" x 84""
","L3000",$12500.00,"0","Yes","20""","84""","2,240","2.08""","Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

7793,"LATHES, ENGINE","1981","Wirth","Model ARD",,"Good","Yes",,"1981
Wirth Model ARD
","L3000",$25000.00,"0","Yes","32""","30""","500","12.204""","Yes","Swing","Centers","RPM","Bar
Cap.","Threading"

8217,"LATHES, SECOND
OPERATION","1977","Hardinge","ASM-5C",,"Good","Yes",,"1977 Hardinge
ASM-5C ","L4805",$8000.00,"-1","Yes","12 3/4""","2 3/4"" x
15""","4,200","1 3/8""","8","Swing","Travels","RPM","Bar
Cap.","Stations"

8230,"LATHES, T TYPE","2000","Lansing","CK64150","Fanuc 10T","Very
Good","Yes",,"2000 Lansing CK64150 Fanuc
10T","L5200",$87500.00,"0","Yes","21.65""","17.32"" x 32.28""","250","6
15/16""","16","Swing","Travels","RPM","Bar Cap.","Stations"

8244,"LATHES, TURRET - RAM
TYPE","1965","Gisholt","#5",,"Good","Yes",,"1965 Gisholt #5
","L6249",$10500.00,"0","Yes","1",,,,,"Swing","Travels","RPM","Bar
Cap.","Stations"

10026,"LATHES, TURRET - RAM TYPE","1958","Warner and Swasey","3A
M-1200",,"Good","Yes",,"1958 Warner and Swasey 3A M-1200
","L6249",$7500.00,"-1","Yes","1",,,,,"Swing","Travels","RPM","Bar
Cap.","Stations"

7925,"LATHES, TURRET - RAM TYPE","1942/2000","Warner and Swasey","3A
M-1200 Lot 288",,"Good","Yes","15 3/8"" Swing, SOC 7"", Spindle Nose to
Turret Face 26"", 1,480 RPM, 7.5 HP, 6 position Turret, Collet Chuck,
Coolant Pan and Pump, Haase Quick Change Tool Post, Rebuilt Seven (7)
Years Ago","1942/2000 Warner and Swasey 3A M-1200 Lot 288
","L6249",$5500.00,"-1","Yes","1",,,,,"Swing","Travels","RPM","Bar
Cap.","Stations"

8169,"LATHES, TURRET - RAM TYPE","1957","Warner and Swasey","3A
M-1200",,"Good","Yes","15 3/8"" Swing, SOC 7"", Spindle Nose to Turret
Face 26"", 1,480 RPM, 7.5 HP, 6 position Turret, 8"" 3-Jaw Chuck,
Coolant Pan and Pump, Single Tool Post","1957 Warner and Swasey 3A
M-1200
","L6249",$7500.00,"-1","Yes","1",,,,,"Swing","Travels","RPM","Bar
Cap.","Stations"

8167,"LATHES, TURRET - SADDLE TYPE",,"Gisholt","1L",,"Good","Yes",,"
Gisholt 1L ","L6304",,"-1","Yes","1",,,,,"Swing","Travels","RPM","Bar
Cap.","Stations"

8168,"LATHES, TURRET - SADDLE TYPE",,"Gisholt","1L",,"Good","Yes",,"
Gisholt 1L ","L6304",,"-1","Yes","1",,,,,"Swing","Travels","RPM","Bar
Cap.","Stations"

7737,"LATHES, TURRET - SADDLE TYPE","1964","Warner and
Swasey","2A",,"Good","Yes",,"1964 Warner and Swasey 2A
","L6304",$19500.00,"0","Yes","1",,,,,"Swing","Travels","RPM","Bar
Cap.","Stations"

9524,"MACHINING CENTERS, GANTRY TYPE,
NC-CNC","1997","Awea","VP-2012","Fanuc OM","Very Good","Yes",,"1997 Awea
VP-2012 Fanuc OM","M0120",$76900.00,"0","Yes","78.7"" x 43.3""","78.7""
x 47.2"" x 30""","5,000","50","30","Table","Travels","RPM","Taper","ATC"

8984,"MACHINING CENTERS, GANTRY TYPE,
NC-CNC","2001/03","Awea","SP-3016","Fanuc 18MC","Very
Good","Yes",,"2001/03 Awea SP-3016 Fanuc
18MC","M0120",$239000.00,"0","Yes","112"" x 59""","120.5"" x 63"" x
30""","6,000","50","60","Table","Travels","RPM","Taper","ATC"

10233,"MACHINING CENTERS, GANTRY TYPE,
NC-CNC","1998","Cincinnati","Sidewinder U5","Acramatic 950","Very
Good","Yes",,"1998 Cincinnati Sidewinder U5 Acramatic
950","M0120",$549000.00,"0","Yes","137"" x 67""","157"" x 96"" x
36""","6,000","50","60","Table","Travels","RPM","Taper","ATC"

10620,"MACHINING CENTERS, GANTRY TYPE,
NC-CNC","2005","Haas","GR-712","Haas 32 BIT","Very Good","Yes",,"2005
Haas GR-712 Haas 32 BIT","M0120",$99000.00,"0","Yes","144"" x
72""","145"" x 85"" x
17""","15,000","40","10","Table","Travels","RPM","Taper","ATC"

10223,"MACHINING CENTERS, GANTRY TYPE,
NC-CNC","2007","Haas","GR-510","Haas 32 BIT","Very Good","Yes","122"" x
53"" Table, 121"" x 61"" x 11"" Travels, 10,000 RPM, 40 Taper, 15 HP, 20
ATC, Remote Jog Handle, Auto Air Gun, Rigid Tapping, Coolant Tank, Quick
Code, 1 Meg of Memory, Spindle Orientation, Visual Quick Code
Programming, Auxiliary Home Button","2007 Haas GR-510 Haas 32
BIT","M0120",,"0","Yes","122"" x 53""","121"" x 61"" x
11""","10,000","40","20","Table","Travels","RPM","Taper","ATC"

9836,"MACHINING CENTERS, GANTRY TYPE,
NC-CNC","1987/2001","Ingersoll","Masterhead","Fanuc
150MB","Good","No",,"1987/2001 Ingersoll Masterhead Fanuc
150MB","M0120",$295000.00,"0","Yes","138"" x 98""","160"" x 120"" x
39""","2,500","50","32","Table","Travels","RPM","Taper","ATC"

8759,"MACHINING CENTERS, GANTRY TYPE,
NC-CNC","1999","Ingersoll","HVM","Fanuc 15MB","Very Good","Yes",,"1999
Ingersoll HVM Fanuc 15MB","M0120",$275000.00,"0","Yes","196.7"" x
98.4""","236.2"" x 118.1"" x
53.4""","24,000","63","60","Table","Travels","RPM","Taper","ATC"

10585,"MACHINING CENTERS, GANTRY TYPE,
NC-CNC","2004","Johnford","DMC-2100H","Fanuc 18iMB","Very
Good","Yes",,"2004 Johnford DMC-2100H Fanuc
18iMB","M0120",$199000.00,"0","Yes","86.6"" x 59""","83"" x 70"" x
42""","10,000","40","24","Table","Travels","RPM","Taper","ATC"

10409,"MACHINING CENTERS, GANTRY TYPE,
NC-CNC","2007","Johnford","DMC-3100H","Fanuc
18iMB","Excellent","Yes",,"2007 Johnford DMC-3100H Fanuc
18iMB","M0120",$269900.00,"0","Yes","126"" x 59""","122"" x 70"" x
31.5""","6,000","50","40","Table","Travels","RPM","Taper","ATC"

10434,"MACHINING CENTERS, GANTRY TYPE,
NC-CNC","2005","Johnford","DMC-2100HN","Fanuc 18iMB","Very
Good","Yes",,"2005 Johnford DMC-2100HN Fanuc
18iMB","M0120",$249500.00,"0","Yes","86.6 "" x 43.3""","82.7"" x 51"" x
31.5","15,000","HSK 100A","56","Table","Travels","RPM","Taper","ATC"

7624,"MACHINING CENTERS, GANTRY TYPE,
NC-CNC","2001","Masco","Bridgemax","Fanuc 16i","Very Good","Yes",,"2001
Masco Bridgemax Fanuc 16i","M0120",$399500.00,"0","Yes","120"" x
72""","185"" x 100"" x
50""","3,750","50","52","Table","Travels","RPM","Taper","ATC"

9329,"MACHINING CENTERS, GANTRY TYPE, NC-CNC","1994","Mighty
Comet","VMC-3000C","Mitsubishi Meldas 335MV","Good","Yes",,"1994 Mighty
Comet VMC-3000C Mitsubishi Meldas
335MV","M0120",$79500.00,"0","Yes","122"" x 47""","121"" x 59"" x
28""","3,800","50","40","Table","Travels","RPM","Taper","ATC"

9166,"MACHINING CENTERS, GANTRY TYPE, NC-CNC","1998","Nicolas
Correa","Euro 2000","Fanuc 16iM","Very Good","Ye",,"1998 Nicolas Correa
Euro 2000 Fanuc 16iM","M0120",$79500.00,"0","Yes","78.7"" x
39.3""","78.7"" x 49.21"" x
25.5""","10,000","40","24","Table","Travels","RPM","Taper","ATC"

10246,"MACHINING CENTERS, GANTRY TYPE, NC-CNC","1998","Okuma","MCV-20A
II","OSP-7000M","Very Good","Yes",,"1998 Okuma MCV-20A II
OSP-7000M","M0120",$268000.00,"0","Yes","110"" x 59.06""","118"" x
78.74"" x
17.72""","4,000","50","24","Table","Travels","RPM","Taper","ATC"

7361,"MACHINING CENTERS, GANTRY TYPE, NC-CNC","1999","SNK","PM-6B
Profiler","Fanuc 15M","Good","Yes","133' x 120"" Table, 132"" Distance
Between Columns, Travel of Each Gantry 97', 120' x 120"" x 32"" Travels,
+/- 25° A & B, 7,000 RPM, 50 Taper, 40 HP, Twin Gantry Machine with
Three (3) Spindle Each","1999 SNK PM-6B Profiler Fanuc
15M","M0120",$2850000.00,"0","Yes","133"" x 120""","120"" x 120"" x
32""","7,000","50",,"Table","Travels","RPM","Taper","ATC"

9302,"MACHINING CENTERS, GANTRY TYPE,
NC-CNC","1997","Toshiba","MPF-2140","Tosnuc 888","Very
Good","Yes",,"1997 Toshiba MPF-2140 Tosnuc
888","M0120",$489500.00,"0","Yes","157.5"" x 70.9""","157.5"" x 82.7"" x
23.6""","12,000","50","30","Table","Travels","RPM","Taper","ATC"

9801,"MACHINING CENTERS, GANTRY TYPE,
NC-CNC","1999","Toshiba","MPE-2140","Tosnuc 888","Very
Good","Yes",,"1999 Toshiba MPE-2140 Tosnuc
888","M0120",$300000.00,"0","Yes","157.5"" x 70.9""","177"" x 114"" x
39""","3,000","50","120","Table","Travels","RPM","Taper","ATC"

7347,"MACHINING CENTERS, HORIZONTAL
CNC","2010","Amera-Seiki","A-50H","Fanuc 18iMB","Like New","Yes",,"2010
Amera-Seiki A-50H Fanuc 18iMB","M0130",$248000.00,"-1","Yes","19.6"" x
19.6""","360,000°","6,000","50","60","Pallets","Indexing","RPM","Taper","ATC"

10390,"MACHINING CENTERS, HORIZONTAL
CNC","1995","Cincinnati","T-30","Acramatic 950","Good","Yes","2 - 31.5""
x 31.5"" Pallets, Full Contouring 4-Axis Pallets, 6,000 RPM, 50 HP, 90
ATC, 600 IPM, Through Spindle Coolant, Chip Conveyor, Spindle Probe,
Tool Setting Probe, Automatic Pallet Changer With Load/Unload
Station","1995 Cincinnati T-30 Acramatic
950","M0130",,"-1","Yes","31.5"" x
31.5""","360,000°","6,000","50","90","Pallets","Indexing","RPM","Taper","ATC"

10465,"MACHINING CENTERS, HORIZONTAL
CNC","1987","Cincinnati","10HC-2500A","Acramatic Big
Blue","Good","Yes",,"1987 Cincinnati 10HC-2500A Acramatic Big
Blue","M0130",$39500.00,"0","Yes","104"" x
32""","5°","4,000","45","30","Pallets","Indexing","RPM","Taper","ATC"

10217,"MACHINING CENTERS, HORIZONTAL
CNC","1997","Cincinnati","Maxim-630","Acramatic 2100",,"YES",,"1997
Cincinnati Maxim-630 Acramatic 2100","M0130",$112000.00,"-1","On
Way","24.8"" x
24.8""","360,000°","10,000","50","80","Pallets","Indexing","RPM","Taper","ATC"

10524,"MACHINING CENTERS, HORIZONTAL
CNC","1987","Cincinnati","10HC-2500A","Acramatic 900","Very
Good","Yes",,"1987 Cincinnati 10HC-2500A Acramatic
900","M0130",$32500.00,"0","Yes","104"" x
31""","0","6,000","50","30","Pallets","Indexing","RPM","Taper","ATC"

9102,"MACHINING CENTERS, HORIZONTAL
CNC","1992","Cincinnati","Maxim-500","Acramatic 950","Very
Good","No","Two (2) 19.7"" x 19.7"" Pallets, 360,000° Indexing, 29.5"" x
29.5"" x 29.5"" Travels, 33.5 HP, 7,000 RPM, 50 Taper, 40 ATC, Chip
Conveyor, Coolant Through Spindle, Color Graphics, Full Tool Library,
High Speed DNC, RS-232 Port, Floppy Drive, Pallet Wash Down, Pallet Wash
Down, Renishaw Receiver, Thousands of Dollars In Spare Parts, Two (2)
Extra Pallets","1992 Cincinnati Maxim-500 Acramatic
950","M0130",$30000.00,"-1","Yes","19.7"" x
19.7""","1°","7,000","50","40","Pallets","Indexing","RPM","Taper","ATC"

9059,"MACHINING CENTERS, HORIZONTAL
CNC","1995","Cincinnati","Maxim-500","Acramatic 950","Good","Yes",,"1995
Cincinnati Maxim-500 Acramatic 950","M0130",,"-1","On Way","19.7"" x
19.7""","360,000°","7,000","50","40","Pallets","Indexing","RPM","Taper","ATC"

10505,"MACHINING CENTERS, HORIZONTAL
CNC","1988","Cincinnati","10HC-2500A","Fanuc 21iM","Very
Good","Yes",,"1988 Cincinnati 10HC-2500A Fanuc
21iM","M0130",$99000.00,"0","Yes","104"" x
31""","0","6,000","50","30","Pallets","Indexing","RPM","Taper","ATC"

9784,"MACHINING CENTERS, HORIZONTAL
CNC","1997","Daewoo","Ace-50H","Fanuc 16M","Good","Yes",,"1997 Daewoo
Ace-50H Fanuc 16M","M0130",$42500.00,"0","Yes","19.7"" x
19.7""","360,000°","5,000","50","60","Pallets","Indexing","RPM","Taper","ATC"

9783,"MACHINING CENTERS, HORIZONTAL
CNC","1996","Daewoo","Ace-50H","Fanuc 16M","Good","Yes",,"1996 Daewoo
Ace-50H Fanuc 16M","M0130",$45000.00,"0","Yes","19.7"" x
19.7""","1°","6,000","50","60","Pallets","Indexing","RPM","Taper","ATC"

9320,"MACHINING CENTERS, HORIZONTAL
CNC","2001","Daewoo","DHP-630","Fanuc 16iMB","Very Good","Yes",,"2001
Daewoo DHP-630 Fanuc 16iMB","M0130",$205000.00,"-1","Yes","24.8"" x
24.8""","360,000°","6,000","50","60","Pallets","Indexing","RPM","Taper","ATC"

7936,"MACHINING CENTERS, HORIZONTAL CNC","1997","Daewoo","Ace
H100","Fanuc 15M","Good","Yes",,"1997 Daewoo Ace H100 Fanuc
15M","M0130",$295000.00,"0","Yes","39.4"" x
39.4""","1°","4,500","50","92","Pallets","Indexing","RPM","Taper","ATC"

7928,"MACHINING CENTERS, HORIZONTAL CNC","1996","Daewoo","Ace
H100","Fanuc 15M","Good","Yes","39.4"" Pallets, 1° Pallet Indexing,
78.70"" x 49.70"" x 39.40"" Travels, 4,500 RPM, 50 Taper, 35 HP, 60 ATC,
Coolant Through Spindle (300 psi), Turbo Chip Conveyor, Rigid Tapping,
Shower Coolant, Spindle Chiller Unit, Remote Jog Handle, Two Speed
Geared Headstock","1996 Daewoo Ace H100 Fanuc
15M","M0130",$254000.00,"0","Yes","39.4"" x
39.4""","1°","4,500","50","60","Pallets","Indexing","RPM","Taper","ATC"

9686,"MACHINING CENTERS, HORIZONTAL CNC","2004","Fortune","H-630","Fanuc
18M","Good","Yes",,"2004 Fortune H-630 Fanuc
18M","M0130",$109000.00,"0","Yes","24.8"" x
24.8""","1°","4,500","50","60","Pallets","Indexing","RPM","Taper","ATC"

8893,"MACHINING CENTERS, HORIZONTAL CNC","2000","Giddings and
Lewis","HMC-410","Siemens 840D","Good","Yes",,"2000 Giddings and Lewis
HMC-410 Siemens 840D","M0130",$575000.00,"0","Yes","62.9"" x
62.9""","360,000°","4,000","50","60","Pallets","Indexing","RPM","Taper","ATC"

10574,"MACHINING CENTERS, HORIZONTAL CNC","2005","Haas","EC-1600","Haas
32 BIT","Very Good","Yes",,"2005 Haas EC-1600 Haas 32
BIT","M0130",$159000.00,"0","Yes","64"" x
32""","360,000°","6,000","50","30","Pallets","Indexing","RPM","Taper","ATC"

10533,"MACHINING CENTERS, HORIZONTAL CNC","2008","Haas","EC-400","Haas
32 BIT","Very Good","Yes",,"2008 Haas EC-400 Haas 32
BIT","M0130",$142000.00,"0","Yes","15.75"" x
15.75""","360,000°","8,000","40","24","Pallets","Indexing","RPM","Taper","ATC"

10412,"MACHINING CENTERS, HORIZONTAL CNC","2004","Haas","EC-400","Haas
32 BIT","Very Good","Yes",,"2004 Haas EC-400 Haas 32
BIT","M0130",$76000.00,"0","Yes","15.75"" x
15.75""","1°","12,000","40","40","Pallets","Indexing","RPM","Taper","ATC"

10185,"MACHINING CENTERS, HORIZONTAL CNC","2007","Haas","EC-3000","Haas
32 BIT","Excellent","Yes",,"2007 Haas EC-3000 Haas 32
BIT","M0130",$220000.00,"0","Yes","120"" x
40""",,"6,000","50","30","Pallets","Indexing","RPM","Taper","ATC"

10165,"MACHINING CENTERS, HORIZONTAL CNC","1999","Haas","HS-1RP","Haas
32 BIT","Very Good","Yes",,"1999 Haas HS-1RP Haas 32
BIT","M0130",$36500.00,"0","Yes","16"" x
16""","360,000°","7,500","40","24","Pallets","Indexing","RPM","Taper","ATC"

10456,"MACHINING CENTERS, HORIZONTAL CNC","2004","Haas","EC-400","Haas
32 BIT","Very Good","Yes",,"2004 Haas EC-400 Haas 32
BIT","M0130",$95000.00,"0","Yes","15.75"" x
15.75""","360,000°","12,000","40","60","Pallets","Indexing","RPM","Taper","ATC"

10627,"MACHINING CENTERS, HORIZONTAL CNC","1996","Haas","HS-1RP","Haas
32 BIT","Good","Yes",,"1996 Haas HS-1RP Haas 32
BIT","M0130",$38000.00,"-1","Yes","15.7"" x
15.7""","360,000°","7,500","40","24","Pallets","Indexing","RPM","Taper","ATC"

9097,"MACHINING CENTERS, HORIZONTAL CNC","2000","Haas","HS-2RP","Haas 32
BIT","Good","Yes",,"2000 Haas HS-2RP Haas 32
BIT","M0130",$49500.00,"0","Yes","20"" x
20""","360,000°","10,000","40","40","Pallets","Indexing","RPM","Taper","ATC"

10216,"MACHINING CENTERS, HORIZONTAL CNC","2006","Haas","EC-400","Haas
32 BIT","Very Good","YES",,"2006 Haas EC-400 Haas 32
BIT","M0130",$185000.00,"0","On Way","15.75"" x
15.75""","1°","8,000","40","40","Pallets","Indexing","RPM","Taper","ATC"

9617,"MACHINING CENTERS, HORIZONTAL CNC","1999","Haas","HS-1RP","Haas 32
BIT","Good","Yes",,"1999 Haas HS-1RP Haas 32
BIT","M0130",$34500.00,"0","Yes","16"" x
16""","360,000°","7,500","40","24","Pallets","Indexing","RPM","Taper","ATC"

7869,"MACHINING CENTERS, HORIZONTAL CNC","2000","Haas","HS-1RP","Haas 32
BIT","Very Good","Yes","16"" x 16"" Pallets, 24"" x 20"" x 22"", 10,000
RPM, 40 Taper, 20 HP, 24 ATC, Chip Auger, RS-232 Port, Rigid Tapping,
Coolant Through Spindle (300 PSI), Remote Jog Handle, 1 Meg Memory, Two
(2) Kurt Vise Towers (8 positions each), Custom Macros, 3.5"" Floppy
Drive","2000 Haas HS-1RP Haas 32 BIT","M0130",$58000.00,"-1","Yes","16""
x
16""","360,000°","10,000","40","24","Pallets","Indexing","RPM","Taper","ATC"

7490,"MACHINING CENTERS, HORIZONTAL
CNC","1998","Hitachi-Seiki","HS-630","Seicos Sigma 16M","Very
Good","Yes","Two 24.8"" Pallets, 360,000° Indexing, 2,640 Lbs Table
Load, 33.5"" x 31.5"" x 33.5"" Travels, 10,000 RPM, 50 Taper, 40 HP, 60
ATC, Coolant Through Spindle, Synchronized Tapping, Helical
Interpolation, Chip Conveyor, Remote Jog Handle","1998 Hitachi-Seiki
HS-630 Seicos Sigma 16M","M0130",$99000.00,"-1","Yes","24.8"" x
24.8""","360,000°","10,000","50","60","Pallets","Indexing","RPM","Taper","ATC"

9702,"MACHINING CENTERS, HORIZONTAL
CNC","1985","Hitachi-Seiki","HC-400","Fanuc 11M","Needs
Work","Yes",,"1985 Hitachi-Seiki HC-400 Fanuc
11M","M0130",,"-1","Yes","16"" x
16""","1°","6,000","40","50","Pallets","Indexing","RPM","Taper","ATC"

8094,"MACHINING CENTERS, HORIZONTAL CNC","2005","Kia","KH-50G","Fanuc
18iMB","Very Good","Yes","19.7"" x 19.7"" Pallets, Full 4th, 29.9"" x
27.8"" x 25.6"" Travels, 8,000 RPM, 50 Taper, 18.5 HP, 60 ATC, Rigid
Tapping, High Pressure Coolant Through Spindle, Chip Conveyor, Remote
Jog Handle, Some Tool Holders, Machine Installed in 2007","2005 Kia
KH-50G Fanuc 18iMB","M0130",$145000.00,"-1","Yes","19.7"" x
19.7""","360,000°","8,000","50","60","Pallets","Indexing","RPM","Taper","ATC"

8289,"MACHINING CENTERS, HORIZONTAL
CNC","1998","Kitamura","H-400","Fanuc 15M","Very Good","Yes",,"1998
Kitamura H-400 Fanuc 15M","M0130",$42000.00,"0","Yes","15.7"" x
15.7""","360,000°","10,000","40","100","Pallets","Indexing","RPM","Taper","ATC"

9518,"MACHINING CENTERS, HORIZONTAL
CNC","1999","Kitamura","HX-300","Fanuc 15M","Very Good","Yes","12"" x
12"" Pallets, Full 4th, 20.1"" x 20.1"" x 15.7"" Travels, 10,000 RPM, 20
HP, 40 Taper, 40 ATC, 512K Memory, Expanded Macros, Coolant Through
Spindle, Geared Head, New Spindle March in 2003, 200 Tool Offsets,
Expanded Work Offsets, Low Hours Cutting Aluminum and Plastic","1999
Kitamura HX-300 Fanuc 15M","M0130",$68000.00,"-1","Yes","12"" x
12""","360,000°","10,000","40","40","Pallets","Indexing","RPM","Taper","ATC"

10173,"MACHINING CENTERS, HORIZONTAL
CNC","2005","Kitamura","HX-630i","Fanuc 16iMB","Very Good","Yes",,"2005
Kitamura HX-630i Fanuc 16iMB","M0130",$199500.00,"0","Yes","24.8"" x
24.8""","360,000°","12,000","50","40","Pallets","Indexing","RPM","Taper","ATC"

9218,"MACHINING CENTERS, HORIZONTAL
CNC","1998","Kitamura","H-400","Fanuc 15M","Good","Yes",,"1998 Kitamura
H-400 Fanuc 15M","M0130",$39500.00,"0","Yes","15.7"" x
15.7""","360,000°","10,000","40","100","Pallets","Indexing","RPM","Taper","ATC"

10363,"MACHINING CENTERS, HORIZONTAL CNC","2006","Kitamura","MyTrunnion
5AP","Fanuc 16iMB"," Excellent","Yes",,"2006 Kitamura MyTrunnion 5AP
Fanuc 16iMB","M0130",$345000.00,"0","Yes","19.6"" x
19.6""","360,000°","20,000","50","50","Pallets","Indexing","RPM","Taper","ATC"

10313,"MACHINING CENTERS, HORIZONTAL
CNC","2001","Kitamura","HX-400i","Fanuc 16iM","Good","Yes",,"2001
Kitamura HX-400i Fanuc 16iM","M0130",$99500.00,"0","Yes","15.7"" x
15.7""","360,000°","13,000","40","50","Pallets","Indexing","RPM","Taper","ATC"

9695,"MACHINING CENTERS, HORIZONTAL
CNC","1992","Kitamura","H-600","Fanuc 15M","Good","Yes",,"1992 Kitamura
H-600 Fanuc 15M","M0130",$59500.00,"0","Yes","24.8"" x
24.8""","360,000°","5,000","50","60","Pallets","Indexing","RPM","Taper","ATC"

8326,"MACHINING CENTERS, HORIZONTAL CNC","2001","Kiwa","KNH-400","Fanuc
18iMA","Very Good","Yes","15.75"" x 15.75"" Pallets, 23.62"" x 23.62"" x
19.68"" Travels, 10,000 RPM, 40 Taper, 25 HP, 64 ATC, Full 4th, High
Pressure Coolant Through Spindle (1,000 psi), Remote Manual Pulse
Generator, Chip Conveyor, Rigid Tapping","2001 Kiwa KNH-400 Fanuc
18iMA","M0130",$115000.00,"-1","Yes","15.75"" x
15.75""","360,000°","10,000","40","64","Pallets","Indexing","RPM","Taper","ATC"

10360,"MACHINING CENTERS, HORIZONTAL CNC","1996","Kuraki","KH-80","Fanuc
15M","Good","Yes",,"1996 Kuraki KH-80 Fanuc
15M","M0130",$75000.00,"0","Yes","31.5"" x
31.5""","360,000°","6,000","50","40","Pallets","Indexing","RPM","Taper","ATC"

8889,"MACHINING CENTERS, HORIZONTAL
CNC","2000","Kuraki","KHM-125","Fanuc 16M","Very Good","Yes",,"2000
Kuraki KHM-125 Fanuc 16M","M0130",$465000.00,"0","Yes","49.2"" x
49.2""","360,000°","8,000","50","60","Pallets","Indexing","RPM","Taper","ATC"

7935,"MACHINING CENTERS, HORIZONTAL
CNC","1999","Makino","MCB-1210","Fanuc 16M Pro3","Very
Good","Yes",,"1999 Makino MCB-1210 Fanuc 16M
Pro3","M0130",$295000.00,"0","Yes","39.4"" x
39.4""","360,000°","15,000","50","60","Pallets","Indexing","RPM","Taper","ATC"

10292,"MACHINING CENTERS, HORIZONTAL CNC","1996","Makino","A-55","Fanuc
Pro 3","Good","Yes",,"1996 Makino A-55 Fanuc Pro
3","M0130",$40000.00,"0","Yes","15.74"" x
15.74""","1°","14,000","40","40","Pallets","Indexing","RPM","Taper","ATC"

10214,"MACHINING CENTERS, HORIZONTAL CNC","1999","Makino","A-66","Makino
Pro 3","Very Good","Yes",,"1999 Makino A-66 Makino Pro
3","M0130",$96500.00,"0","Yes","19.69"" x
19.69""","1°","14,000","40","40","Pallets","Indexing","RPM","Taper","ATC"

10146,"MACHINING CENTERS, HORIZONTAL CNC","2008","Makino","A-82M","Fanuc
FS310is (Pro 5)","Like New","Yes",,"2008 Makino A-82M Fanuc FS310is (Pro
5)","M0130",$520000.00,"0","Yes","24.8"" x
24.8""","360,000°","8,000","50","137","Pallets","Indexing","RPM","Taper","ATC"

9272,"MACHINING CENTERS, HORIZONTAL CNC","1999","Makino","A-66","Fanuc
16iM","Very Good","Yes",,"1999 Makino A-66 Fanuc
16iM","M0130",$99500.00,"0","Yes","19.69"" x
19.69""","360,000°","14,000","40","60","Pallets","Indexing","RPM","Taper","ATC"

9851,"MACHINING CENTERS, HORIZONTAL CNC","1995","Makino","MC-98","Fanuc
Pro 3","Good","Yes",,"1995 Makino MC-98 Fanuc Pro
3","M0130",$129500.00,"0","Yes","24.8"" x
24.8""","360,000°","15,000","50","60","Pallets","Indexing","RPM","Taper","ATC"

10516,"MACHINING CENTERS, HORIZONTAL CNC","2001","Makino","A-88","Fanuc
Pro 3","Good","Yes",,"2001 Makino A-88 Fanuc Pro
3","M0130",$199500.00,"0","Yes","24.81"" x 24.81""","1°","35.4"" x
31.5"" x 38.2","50","132","Pallets","Indexing","RPM","Taper","ATC"

9404,"MACHINING CENTERS, HORIZONTAL CNC","1992","Makino","A-55","Fanuc
Pro 3"," Very Good","Yes",,"1992 Makino A-55 Fanuc Pro
3","M0130",$39500.00,"0","Yes","15.74"" x
15.74""","360,000°","12,000","40","40","Pallets","Indexing","RPM","Taper","ATC"

9962,"MACHINING CENTERS, HORIZONTAL CNC","2001","Makino","A-55 E","Fanuc
Pro 3","Good","Yes",,"2001 Makino A-55 E Fanuc Pro
3","M0130",$99500.00,"0","Yes","15.74"" x
15.74""","360,000°","14,000","63","40","Pallets","Indexing","RPM","Taper","ATC"

8603,"MACHINING CENTERS, HORIZONTAL CNC","2002","Makino","A-66","Fanuc
16iM","Good","Yes",,"2002 Makino A-66 Fanuc
16iM","M0130",$79500.00,"0","Yes","19.69"" x
19.69""","360,000°","14,000","63","40","Pallets","Indexing","RPM","Taper","ATC"

9362,"MACHINING CENTERS, HORIZONTAL
CNC","1999","Makino","MCB-1210","Fanuc 16M Pro3","Good","Yes",,"1999
Makino MCB-1210 Fanuc 16M Pro3","M0130",$159000.00,"-1","Yes","39.4"" x
39.4""","360,000°","15,000","50","60","Pallets","Indexing","RPM","Taper","ATC"

9976,"MACHINING CENTERS, HORIZONTAL CNC","1987","Matsuura","MC-900H
63","Fanuc 11M","Very Good","Yes",,"1987 Matsuura MC-900H 63 Fanuc
11M","M0130",$38000.00,"-1","Yes","23.62"" x
23.62""","360,000°","4,500","50","100","Pallets","Indexing","RPM","Taper","ATC"

9975,"MACHINING CENTERS, HORIZONTAL CNC","1988","Matsuura","MC-900H
63","Fanuc 11M","Very Good","Yes",,"1988 Matsuura MC-900H 63 Fanuc
11M","M0130",$38000.00,"-1","Yes","23.62"" x
23.62""","360,000°","4,500","50","50","Pallets","Indexing","RPM","Taper","ATC"

9974,"MACHINING CENTERS, HORIZONTAL CNC","1988","Matsuura","MC-900H
63","Fanuc 11M","Very Good","Yes",,"1988 Matsuura MC-900H 63 Fanuc
11M","M0130",$38000.00,"-1","Yes","23.62"" x
23.62""","360,000°","4,500","50","50","Pallets","Indexing","RPM","Taper","ATC"

9386,"MACHINING CENTERS, HORIZONTAL
CNC","1987","Mazak","YMS-H25Q","Mazatrol M-2","Very Good","Yes",,"1987
Mazak YMS-H25Q Mazatrol M-2","M0130",$295000.00,"0","Yes","118.11"" x
64.17""","360,000°","2,600","50","80","Pallets","Indexing","RPM","Taper","ATC"

10110,"MACHINING CENTERS, HORIZONTAL
CNC","2000","Mazak","FH-8800","Mazatrol Fusion 640M","Good","Yes",,"2000
Mazak FH-8800 Mazatrol Fusion 640M","M0130",$220000.00,"-1","On
Way","31.5"" x
31.5""","1°","7,000","50","80","Pallets","Indexing","RPM","Taper","ATC"

9318,"MACHINING CENTERS, HORIZONTAL CNC","1990","Mazak","H-400 /
40N","Mazatrol M-32","Very Good","Yes","15.75"" X 15.75"" Pallets, 1°
Indexing, 22"" x 18"" x 20"", 7,000 RPM, 40 Taper, 12 HP, 30 ATC,
Coolant Through Spindle, Chip Conveyor, Chiller Unit, RS-232C
Port","1990 Mazak H-400 / 40N Mazatrol
M-32","M0130",$26000.00,"0","Yes","15.75"" x
15.75""","1°","7,000","40","30","Pallets","Indexing","RPM","Taper","ATC"

10257,"MACHINING CENTERS, HORIZONTAL
CNC","1997","Mazak","FH-680","Mazatrol M-Plus","Very Good","Yes",,"1997
Mazak FH-680 Mazatrol M-Plus","M0130",$119500.00,"0","Yes","24.8"" x
24.8""","360,000°","10,000","50","80","Pallets","Indexing","RPM","Taper","ATC"

9074,"MACHINING CENTERS, HORIZONTAL
CNC","2001","Mazak","FH-4800","Mazatrol Fusion 640M","Good","Yes",,"2001
Mazak FH-4800 Mazatrol Fusion
640M","M0130",$119500.00,"0","Yes","15.75"" x
15.75""","1°","12,000","40","40","Pallets","Indexing","RPM","Taper","ATC"

10416,"MACHINING CENTERS, HORIZONTAL
CNC","2001","Mazak","FH-4800","Mazatrol Fusion 640M","Good","Yes",,"2001
Mazak FH-4800 Mazatrol Fusion
640M","M0130",$142500.00,"0","Yes","15.75"" x
15.75""","1°","25,000","40","80","Pallets","Indexing","RPM","Taper","ATC"

10418,"MACHINING CENTERS, HORIZONTAL
CNC","2002","Mazak","PFH-4800","Mazatrol Fusion
640M","Good","Yes",,"2002 Mazak PFH-4800 Mazatrol Fusion
640M","M0130",$124500.00,"0","Yes","15.75"" x
15.75""","360,000°","12,000","40","40","Pallets","Indexing","RPM","Taper","ATC"

9742,"MACHINING CENTERS, HORIZONTAL CNC","1986","Mazak","H-400 /
40N","Mazatrol M-2","Good","Yes",,"1986 Mazak H-400 / 40N Mazatrol
M-2","M0130",$19500.00,"-1","On Way","15.75"" x
15.75""","1°","7,000","40","30","Pallets","Indexing","RPM","Taper","ATC"

10142,"MACHINING CENTERS, HORIZONTAL
CNC","2004","Mazak","PFH-5800","Mazatrol Fusion 640 M","Very
Good","Yes",,"2004 Mazak PFH-5800 Mazatrol Fusion 640
M","M0130",$239500.00,"0","Yes","19.68"" x
19.68""","1°","12,000","40","80","Pallets","Indexing","RPM","Taper","ATC"

10232,"MACHINING CENTERS, HORIZONTAL
CNC","1996","Mitsubishi","M-H100C","Mitsubishi 520M","Very
Good","Yes",,"1996 Mitsubishi M-H100C Mitsubishi
520M","M0130",$189500.00,"0","Yes","39.4"" x
39.4""","360,000°","4,000","50","80","Pallets","Indexing","RPM","Taper","ATC"

9980,"MACHINING CENTERS, HORIZONTAL
CNC","1994","Mitsubishi","M-H80D","Mitsubishi 300","Good","Yes",,"1994
Mitsubishi M-H80D Mitsubishi 300","M0130",$75000.00,"-1","Yes","31.5"" x
31.5""","360,000°","4,000","50","80","Pallets","Indexing","RPM","Taper","ATC"

9865,"MACHINING CENTERS, HORIZONTAL
CNC","1992","Mitsui-Seiki","HT-3A","Fanuc 15M","Good","Yes",,"1992
Mitsui-Seiki HT-3A Fanuc 15M","M0130",$22500.00,"-1","Yes","15.75"" x
15.75""","360,000°","12,000","40","90","Pallets","Indexing","RPM","Taper","ATC"

10357,"MACHINING CENTERS, HORIZONTAL
CNC","1993","Mitsui-Seiki","JIDIC-H6C","Fanuc 15M","Very
Good","Yes",,"1993 Mitsui-Seiki JIDIC-H6C Fanuc
15M","M0130",$375000.00,"-1","Yes","31.5"" x
31.5""","360,000°","3,150","50","120","Pallets","Indexing","RPM","Taper","ATC"

8964,"MACHINING CENTERS, HORIZONTAL
CNC","2000","Mitsui-Seiki","HU-63A","Fanuc 16M","Very Good","Yes",,"2000
Mitsui-Seiki HU-63A Fanuc 16M","M0130",$89500.00,"0","Yes","24.8"" x
24.8""","1°","10,000","50","90","Pallets","Indexing","RPM","Taper","ATC"

9406,"MACHINING CENTERS, HORIZONTAL
CNC","1996","Mitsui-Seiki","HT-3A","Fanuc 15MA","Very Good","Yes",,"1996
Mitsui-Seiki HT-3A Fanuc 15MA","M0130",$49500.00,"0","Yes","15.75"" x
15.75""","360,000°","20,000","40","90","Pallets","Indexing","RPM","Taper","ATC"

8982,"MACHINING CENTERS, HORIZONTAL
CNC","1984","Mitsui-Seiki","HR-7A","Fanuc 6MB","Good","Yes",,"1984
Mitsui-Seiki HR-7A Fanuc 6MB","M0130",$59900.00,"-1","Yes","51.2"" x
51.2""","360,000°","3,150","50","60","Pallets","Indexing","RPM","Taper","ATC"

10356,"MACHINING CENTERS, HORIZONTAL
CNC","1999","Mitsui-Seiki","HJ-100A","Fanuc 15M","Very
Good","Yes",,"1999 Mitsui-Seiki HJ-100A Fanuc
15M","M0130",$380000.00,"-1","Yes","31.5"" x
31.5""","360,000°","8,000","50","240","Pallets","Indexing","RPM","Taper","ATC"

10354,"MACHINING CENTERS, HORIZONTAL
CNC","1996","Mori-Seiki","SH-50","Fanuc 16M","Very Good","Yes",,"1996
Mori-Seiki SH-50 Fanuc 16M","M0130",$60000.00,"0","Yes","19.7"" x
19.7""","1°","12,000","40","60","Pallets","Indexing","RPM","Taper","ATC"

8956,"MACHINING CENTERS, HORIZONTAL
CNC","1987","Mori-Seiki","MH-50","Fanuc 18M","Needs Repair","Yes",,"1987
Mori-Seiki MH-50 Fanuc 18M","M0130",,"-1","Yes","19.7"" x
19.7""","360,000°","6,000","50","40","Pallets","Indexing","RPM","Taper","ATC"

10592,"MACHINING CENTERS, HORIZONTAL
CNC","1994","Mori-Seiki","MH-63","Fanuc 16M","Good","Yes",,"1994
Mori-Seiki MH-63 Fanuc 16M","M0130",$189900.00,"0","Yes","24.8"" x
24.8""","1°","6,000","50","60","Pallets","Indexing","RPM","Taper","ATC"

10413,"MACHINING CENTERS, HORIZONTAL CNC","2008","Mori-Seiki","NH-4000
DCG","Mori-Seiki MSG-501","Very Good","Yes",,"2008 Mori-Seiki NH-4000
DCG Mori-Seiki MSG-501","M0130",$272000.00,"0","Yes","15.75"" x
15.75""","360,000°","14,000","40","120","Pallets","Indexing","RPM","Taper","ATC"

10280,"MACHINING CENTERS, HORIZONTAL
CNC","1995","Mori-Seiki","SH-50","Fanuc 16M","Good","Yes",,"1995
Mori-Seiki SH-50 Fanuc 16M","M0130",$69500.00,"0","Yes","19.7"" x
19.7""","1°","12,000","40","40","Pallets","Indexing","RPM","Taper","ATC"

9411,"MACHINING CENTERS, HORIZONTAL
CNC","1995","Mori-Seiki","SH-50","Mitsubishi
MSC-516","Good","Yes",,"1995 Mori-Seiki SH-50 Mitsubishi
MSC-516","M0130",$55000.00,"0","Yes","19.7"" x
19.7""","1°","12,000","40","40","Pallets","Indexing","RPM","Taper","ATC"

10106,"MACHINING CENTERS, HORIZONTAL
CNC","1996","Mori-Seiki","SH-63","Fanuc 16M","Good","Yes","24.8"" x
24.8"" Pallets, 33.07"" x 29.92"" x 33.07"" Travels, 15,000 RPM, 50
Taper, 40 HP, 120 ATC, Chip Conveyor, Shower Coolant","1996 Mori-Seiki
SH-63 Fanuc 16M","M0130",$130000.00,"-1","Yes","24.8"" x
24.8""","1°","15,000","50","120","Pallets","Indexing","RPM","Taper","ATC"

9970,"MACHINING CENTERS, HORIZONTAL
CNC","1997","Mori-Seiki","SH-63","Fanuc 160iM","Good","Yes",,"1997
Mori-Seiki SH-63 Fanuc 160iM","M0130",$65000.00,"0","Yes","24.8"" x
24.8""","1°","10,000","50","60","Pallets","Indexing","RPM","Taper","ATC"

10439,"MACHINING CENTERS, HORIZONTAL CNC","2000","Mori-Seiki","SH-503 /
40","Moric MSG-502","Very Good","Yes",,"2000 Mori-Seiki SH-503 / 40
Moric MSG-502","M0130",$175000.00,"0","Yes","19.7"" x
19.7""","360,000°","12,000","40","60","Pallets","Indexing","RPM","Taper","ATC"

10281,"MACHINING CENTERS, HORIZONTAL
CNC","1996","Niigata","SPN-50","Fanuc 16M","Good","Yes",,"1996 Niigata
SPN-50 Fanuc 16M","M0130",$67500.00,"0","Yes","19.7"" x
19.7""","360,000°","12,000","50","178","Pallets","Indexing","RPM","Taper","ATC"

9410,"MACHINING CENTERS, HORIZONTAL
CNC","1997","Niigata","HN-50C","Fanuc 15M","Good","Yes",,"1997 Niigata
HN-50C Fanuc 15M","M0130",$69500.00,"0","No","19.7"" x
19.7""","1°","6,500","50","120","Pallets","Indexing","RPM","Taper","ATC"

8959,"MACHINING CENTERS, HORIZONTAL
CNC","1995","Niigata","SPN-50","Fanuc 16M","Very Good","Yes",,"1995
Niigata SPN-50 Fanuc 16M","M0130",$79500.00,"-1","Yes","19.7"" x
19.7""","360,000°","12,000","50","178","Pallets","Indexing","RPM","Taper","ATC"

8017,"MACHINING CENTERS, HORIZONTAL
CNC","1997","Niigata","SPN-40","Fanuc 16iM","Very Good","Yes",,"1997
Niigata SPN-40 Fanuc 16iM","M0130",$49500.00,"0","Yes","15.7"" x
15.7""","1°","12,000","40","60","Pallets","Indexing","RPM","Taper","ATC"

9711,"MACHINING CENTERS, HORIZONTAL
CNC","2000","Niigata","HN-63C","Fanuc 16iM","Very Good","Yes",,"2000
Niigata HN-63C Fanuc 16iM","M0130",$115000.00,"0","Yes","24.8"" X
24.8""","360,000°","6,500","50","60","Pallets","Indexing","RPM","Taper","ATC"

8983,"MACHINING CENTERS, HORIZONTAL
CNC","2000","Niigata","HN-80C","Fanuc 18iM","Very Good","Yes",,"2000
Niigata HN-80C Fanuc 18iM","M0130",$299000.00,"0","Yes","31.5"" x
31.5""","360,000°","12,000","50","126","Pallets","Indexing","RPM","Taper","ATC"

10336,"MACHINING CENTERS, HORIZONTAL
CNC","1993","Niigata","HN-80C","Fanuc 15MA","Good","Yes",,"1993 Niigata
HN-80C Fanuc 15MA","M0130",$250000.00,"0","Yes","31.5"" x
31.5""","360,000°","6,000","50","240","Pallets","Indexing","RPM","Taper","ATC"

9405,"MACHINING CENTERS, HORIZONTAL CNC","2003","OKK","HM-80S","Fanuc
160iM","Very Good","Yes",,"2003 OKK HM-80S Fanuc
160iM","M0130",$275000.00,"0","Yes","31.49"" x
31.49""","360,000°","12,000","50","116","Pallets","Indexing","RPM","Taper","ATC"

9300,"MACHINING CENTERS, HORIZONTAL CNC","2001","OKK","HM-60","Fanuc
16i","Good","Yes",,"2001 OKK HM-60 Fanuc
16i","M0130",$99500.00,"0","Yes","23.6"" x
23.6""","360,000°","8,000","50","40","Pallets","Indexing","RPM","Taper","ATC"

9274,"MACHINING CENTERS, HORIZONTAL CNC","1997","OKK","HM-40","OKK
NeoMatic 530","Very Good","Yes",,"1997 OKK HM-40 OKK NeoMatic
530","M0130",$59000.00,"0","Yes","15.75"" x
15.75""","1°","10,000","40","40","Pallets","Indexing","RPM","Taper","ATC"

10438,"MACHINING CENTERS, HORIZONTAL CNC","1999","OKK","HN-80C","Fanuc
16iM","Good","Yes",,"1999 OKK HN-80C Fanuc
16iM","M0130",$139000.00,"0","Yes","31.5"" X
31.5""","1°","8,000","50","40","Pallets","Indexing","RPM","Taper","ATC"

9778,"MACHINING CENTERS, HORIZONTAL CNC","1999","OKK","HM-80S","Fanuc
160iM","Good","Yes",,"1999 OKK HM-80S Fanuc
160iM","M0130",$149500.00,"0","Yes","31.49"" x
31.49""","1°","12,000","50","40","Pallets","Indexing","RPM","Taper","ATC"

10500,"MACHINING CENTERS, HORIZONTAL CNC","1999","OKK","HM-80S","Fanuc
16iM","Good","Yes",,"1999 OKK HM-80S Fanuc
16iM","M0130",$129500.00,"0","Yes","31.49"" X
31.49""","1°","8,000","40","40","Pallets","Indexing","RPM","Taper","ATC"

8181,"MACHINING CENTERS, HORIZONTAL CNC","2007","OKK","HP-500 S","Fanuc
I80i SMB","Excellent","Yes",,"2007 OKK HP-500 S Fanuc I80i
SMB","M0130",$310000.00,"0","Yes","19.69"" x
19.69""","360,000°","15,000","40","162","Pallets","Indexing","RPM","Taper","ATC"

9979,"MACHINING CENTERS, HORIZONTAL
CNC","1994","Okuma","MC-500H","OSP-5020M","Good","Yes",,"1994 Okuma
MC-500H OSP-5020M","M0130",$25000.00,"-1","Yes","19.69"" x
19.69""","360,000°","5,000","50","40","Pallets","Indexing","RPM","Taper","ATC"

8323,"MACHINING CENTERS, HORIZONTAL CNC","2001","Okuma and Howa","Millac
550H","Fanuc 16iM","Very Good","Yes","19.68"" x 19.68"" Pallets, 31.5""
x 31.5"" x 27.5"" Travels, 10,000 RPM, 50 Taper, 40 HP, 60 ATC, Full
4th, High Pressure Coolant Through Spindle (1,000 psi), Hydraulics
Plumbed To Each Pallet For Work Holding Fixtures, Chip Conveyor, 5,500
Cutting Hours, Cutting Only Aluminum","2001 Okuma and Howa Millac 550H
Fanuc 16iM","M0130",$159000.00,"-1","Yes","19.68"" x
19.68""","360,000°","10,000","50","60","Pallets","Indexing","RPM","Taper","ATC"

9408,"MACHINING CENTERS, HORIZONTAL CNC","1997","Saeilo ","Mach
4","Fanuc 21iM","Very Good","Yes",,"1997 Saeilo Mach 4 Fanuc
21iM","M0130",$24500.00,"0","Yes","15.7"" x
15.7""","360,000°","8,000","40","20","Pallets","Indexing","RPM","Taper","ATC"

10006,"MACHINING CENTERS, HORIZONTAL CNC","1989","Scharmann","Salon
2",,,"Yes",,"1989 Scharmann Salon 2 ","M0130",,"-1","On Way","31.5"" x
24.6""","360,000°","3,500","50","80","Pallets","Indexing","RPM","Taper","ATC"

9111,"MACHINING CENTERS, HORIZONTAL
CNC","2007","SNK","HPS-120B-5","Fanuc 31iA-5","Excellent","Yes",,"2007
SNK HPS-120B-5 Fanuc 31iA-5","M0130",$700000.00,"0","Yes","120"" x
48""","360,000°","15,000","50","60","Pallets","Indexing","RPM","Taper","ATC"

9573,"MACHINING CENTERS, HORIZONTAL
CNC","2001","SNK","HPS-120B-5","Fanuc 15iM","Very Good","Yes",,"2001 SNK
HPS-120B-5 Fanuc 15iM","M0130",$525000.00,"0","Yes","120"" x
48""",,"12,000","50","40","Pallets","Indexing","RPM","Taper","ATC"

9273,"MACHINING CENTERS, HORIZONTAL
CNC","1998","Starrag-Heckert","CWK-400","Fanuc 16iM","Very
Good","Yes",,"1998 Starrag-Heckert CWK-400 Fanuc
16iM","M0130",$99500.00,"0","Yes","16"" x
16""","360,000°","10,000","40","60","Pallets","Indexing","RPM","Taper","ATC"

9978,"MACHINING CENTERS, HORIZONTAL
CNC","1984","Toshiba","BMC-80E","Tosnuc 600M","Good","Yes",,"1984
Toshiba BMC-80E Tosnuc 600M","M0130",$65000.00,"-1","Yes","31.5"" x
31.5""","360,000°","5,000","50","60","Pallets","Indexing","RPM","Taper","ATC"

10344,"MACHINING CENTERS, HORIZONTAL CNC","2001","Toyoda","FA-550
II","Fanuc 16i","Good","Yes",,"2001 Toyoda FA-550 II Fanuc
16i","M0130",$79500.00,"0","Yes","21.65"" x
21.65""","1°","6,000","50","120","Pallets","Indexing","RPM","Taper","ATC"

10461,"MACHINING CENTERS, HORIZONTAL CNC","2008","Toyoda","FA-630
RGV","Fanuc 16iMB","Excellent","Yes",,"2008 Toyoda FA-630 RGV Fanuc
16iMB","M0130",$599500.00,"0","Yes","24.8"" x
24.8""","360,000°","6,000","50","190","Pallets","Indexing","RPM","Taper","ATC"

9634,"MACHINING CENTERS, HORIZONTAL CNC","1997","Toyoda","FA-550
II","Fanuc 15MB","Very Good","Yes","Six (6) 21.65"" Pallet, Full 4th,
29.52"" x 29.52"" x 23.62"" Travels, 6,000 RPM, 50 Taper, 40 HP, 120
ATC, Coolant Through Spindle, Helical Interpolation, Rigid Tapping, Chip
Conveyor, Toyoda Touch Sensor Function, Barnes Kleenal Chip Filter,
Program Data Input","1997 Toyoda FA-550 II Fanuc
15MB","M0130",$159500.00,"0","Yes","21.65"" x
21.65""","360,000°","6,000","50","120","Pallets","Indexing","RPM","Taper","ATC"

8629,"MACHINING CENTERS, VERTICAL,
CNC","2009","Amera-Seiki","VX5-3","Fanuc 31iMA","New","No",,"2009
Amera-Seiki VX5-3 Fanuc 31iMA","M0185",$799900.00,"-1","Yes","128"" x
31.5""","118"" x 39.4"" x
29.5""","12,000","50","32","Table","Travels","RPM","Taper","ATC"

7990,"MACHINING CENTERS, VERTICAL,
CNC","2010","Amera-Seiki","A-5","Fanuc OiMC","New","Yes",,"2010
Amera-Seiki A-5 Fanuc OiMC","M0185",$193700.00,"-1","Yes","67"" x
32""","63"" x 31.5"" x
27.5""","6,000","50","32","Table","Travels","RPM","Taper","ATC"

7345,"MACHINING CENTERS, VERTICAL, CNC","2006","Amera-Seiki","A-1
APC","Mitsubishi 64SM","Like New","Yes",,"2006 Amera-Seiki A-1 APC
Mitsubishi 64SM","M0185",$56000.00,"-1","Yes","22"" x 15.75""","20.15""
x 14.20"" x
17.7""","10,000","30","21","Table","Travels","RPM","Taper","ATC"

10485,"MACHINING CENTERS, VERTICAL,
CNC","2005","Amera-Seiki","A-4","Fanuc 21iMB","Very Good","Yes",,"2005
Amera-Seiki A-4 Fanuc 21iMB","M0185",$69900.00,"0","Yes","44"" x
22""","51"" x 27.5"" x
28""","8,000","40","25","Table","Travels","RPM","Taper","ATC"

10582,"MACHINING CENTERS, VERTICAL,
CNC","2008","Amera-Seiki","A-3","Fanuc OiMC","Like New","Yes",,"2008
Amera-Seiki A-3 Fanuc OiMC","M0185",$74500.00,"0","Yes","44"" x
22""","43"" x 22"" x
22""","12,000","40","24","Table","Travels","RPM","Taper","ATC"

9539,"MACHINING CENTERS, VERTICAL,
CNC","1998","Bostomatic","BD-405","Bostomatic MDSI Control","Very
Good","Yes",,"1998 Bostomatic BD-405 Bostomatic MDSI
Control","M0185",$60000.00,"0","Yes","48"" x 14""","20"" x 9"" x
15""","10,000","30","15","Table","Travels","RPM","Taper","ATC"

7721,"MACHINING CENTERS, VERTICAL,
CNC","1998","Bostomatic","605","Bostomatic
BDC-3200X","Good","Yes",,"1998 Bostomatic 605 Bostomatic
BDC-3200X","M0185",$229000.00,"0","Yes","47.24"" x 20.08""","40.10"" x
22.05"" x
22.05""","8,000","63","15","Table","Travels","RPM","Taper","ATC"

9540,"MACHINING CENTERS, VERTICAL,
CNC","1998","Bostomatic","BD-505","Bostomatic BDC-3200X","Very
Good","Yes",,"1998 Bostomatic BD-505 Bostomatic
BDC-3200X","M0185",$102000.00,"0","Yes","76"" x 16""","40"" x 12.5"" x
17""","10,000","63","18","Table","Travels","RPM","Taper","ATC"

8044,"MACHINING CENTERS, VERTICAL, CNC","1990","Butler Elgamill","HE
28363","Heidenhain 355","Good","Yes","315"" x 32"" Table, 244"" x 65"" x
38"" Travels, A-Axis Travel 130,000°, B-Axis Travel 360,000°, 3,000 RPM,
50 Taper, 29.5 HP, 40 ATC, Chip Conveyor, Full CNC Controlled Swivel
Head, Power Draw Bar","1990 Butler Elgamill HE 28363 Heidenhain
355","M0185",$219500.00,"-1","Yes","315"" x 32""","244"" x 65"" x
38""","3,000","50","40","Table","Travels","RPM","Taper","ATC"

7566,"MACHINING CENTERS, VERTICAL,
CNC","1994","Cincinnati","Sabre-1000","Acramatic 850
SX","Good","Yes","44"" x 20"" Table, 40"" x 20"" x 22"", 8,000 RPM, 40
Taper, 21 ATC, 945 IPM","1994 Cincinnati Sabre-1000 Acramatic 850
SX","M0185",$24500.00,"0","Yes","44"" x 20""","40"" x 20"" x
22""","8,000","40","21","Table","Travels","RPM","Taper","ATC"

9918,"MACHINING CENTERS, VERTICAL,
CNC","1998","Cincinnati","Sabre-1500","Acramatic
2100","Good","Yes",,"1998 Cincinnati Sabre-1500 Acramatic
2100","M0185",$28000.00,"-1","Yes","64"" x 30""","60"" x 30"" x
32""","8,000","40","42","Table","Travels","RPM","Taper","ATC"

8761,"MACHINING CENTERS, VERTICAL,
CNC","1996","Cincinnati","Sabre-1500","Acramatic 2100","Very
Good","Yes",,"1996 Cincinnati Sabre-1500 Acramatic
2100","M0185",$39500.00,"0","Yes","64"" x 30""","60"" x 30"" x
32""","8,000","40","42","Table","Travels","RPM","Taper","ATC"

9568,"MACHINING CENTERS, VERTICAL,
CNC","1996","Cincinnati","Sabre-1500","Acramatic 2100","Very
Good","Yes",,"1996 Cincinnati Sabre-1500 Acramatic
2100","M0185",$34900.00,"0","Yes","64"" x 30""","60"" x 30"" x
32""","10,000","40","21","Table","Travels","RPM","Taper","ATC"

7567,"MACHINING CENTERS, VERTICAL,
CNC","1991","Cincinnati","Sabre-1250","Acramatic 850
SX","Good","Yes",,"1991 Cincinnati Sabre-1250 Acramatic 850
SX","M0185",$39500.00,"0","NO","54"" x 26""","49.2"" x 25.6"" x
25.6""","8,000","40","21","Table","Travels","RPM","Taper","ATC"

9016,"MACHINING CENTERS, VERTICAL, CNC","2000","Cincinnati","Lancer V-5
2000","Acramatic 2100","Very Good","Yes",,"2000 Cincinnati Lancer V-5
2000 Acramatic 2100","M0185",$155000.00,"0","Yes","90"" x 30.1""","80""
x 30"" x 30""","15,000","63","21","Table","Travels","RPM","Taper","ATC"

9445,"MACHINING CENTERS, VERTICAL,
CNC","1993","Cincinnati","Sabre-750","Acramatic 850 SX","Needs Minor
Repair","No","34"" x 20"" Table, 8,000 RPM, 15 HP, 40 Taper, 21 ATC,
Coolant Through Spindle, Rigid Tapping, High Torque Carrier, Manuals,
Needs New Keyboard","1993 Cincinnati Sabre-750 Acramatic 850
SX","M0185",$8000.00,"-1","Yes","34"" x 20""","29.94"" x 20.07"" x
22.05""","5,000","40","21","Table","Travels","RPM","Taper","ATC"

9204,"MACHINING CENTERS, VERTICAL,
CNC","1985/06","Cincinnati","20V-80","Centroid M 400","Very
Good","Yes","84.05"" x 29.92"" Table, 78.74"" x 29.94"" x 24"" Travels,
+/- 25° A / B Travels, 3,600 RPM, 50 Taper, 25 HP, Coolant System, Full
Five Axis Control, Machine Retrofitted With New Servos and Centroid
Control in 2007","1985/06 Cincinnati 20V-80 Centroid M
400","M0185",$165000.00,"-1","On Way","84.05""x 29.92""","78.74"" x
29.94"" x 24""","3,600","50",,"Table","Travels","RPM","Taper","ATC"

9203,"MACHINING CENTERS, VERTICAL,
CNC","1989/2007","Cincinnati","20V-120","Centroid M 400","Very
Good","Yes","122"" x 29.92"" Table, 120"" x 30"" x 24"" Travels, +/- 29°
A / B Travels, 3,600 RPM, 50 Taper, 25 HP, Coolant System, Full Five
Axis Control, Machine Retrofitted With New Servos and Centroid Control
in 2007","1989/2007 Cincinnati 20V-120 Centroid M
400","M0185",$185000.00,"-1","Yes","122"" x 29.92""","120"" x 30"" x
24""","3,600","50",,"Table","Travels","RPM","Taper","ATC"

9446,"MACHINING CENTERS, VERTICAL,
CNC","1995","Cincinnati","Arrow-500","Acramatic Series F","Needs Minor
Repair","No","27.5"" x 20.5"" Table, 20"" x 20"" x 20"" Travels, 6,000
RPM, 15 HP, 40 Taper, 21 ATC, RS-232 Port, Manuals, Rigid Tapping, Needs
New Power Supply","1995 Cincinnati Arrow-500 Acramatic Series
F","M0185",$8000.00,"-1","Yes","27.5"" x 20.5""","20.07"" x 20.07"" x
20.07""","6,000","40","21","Table","Travels","RPM","Taper","ATC"

10449,"MACHINING CENTERS, VERTICAL,
CNC","2005","Daewoo","DMV-5025","Fanuc 21iM","Very Good","Yes",,"2005
Daewoo DMV-5025 Fanuc 21iM","M0185",$75000.00,"-1","Yes","55.1"" x
25.6""","51"" x 25.5"" x
24.6""","12,000","40","24","Table","Travels","RPM","Taper","ATC"

10542,"MACHINING CENTERS, VERTICAL, CNC","2005","Daewoo","DMV-3016
LD","Fanuc 0iMB","Very Good","Yes",,"2005 Daewoo DMV-3016 LD Fanuc
0iMB","M0185",$49900.00,"0","Yes","36.2"" x 16.9""","30"" x 16.1""
20.1""","8,000","40","20","Table","Travels","RPM","Taper","ATC"

10419,"MACHINING CENTERS, VERTICAL, CNC","1990","Dah
Lih","MCV-2100","Fanuc 11M","Good","Yes",,"1990 Dah Lih MCV-2100 Fanuc
11M","M0185",$26500.00,"-1","On Way","90.5"" x 31.5""","82.7"" x 33.5""
x 29.9""","3,500","50","32","Table","Travels","RPM","Taper","ATC"

8760,"MACHINING CENTERS, VERTICAL, CNC","2001","Enshu","EV-650","Yasnac
J-300M","Excellent","Yes","78.7"" x 25.6"" Table, 63"" x 25.6"" x 25.6""
Travels, 6,000 RPM, 20 HP, 50 Taper, 30 ATC, High Speed Milling Option,
Chip Conveyor, DNC Port, Tool Life Management, Remote Jog Handle, Tool
Length Measurement, 4th Axis Ready","2001 Enshu EV-650 Yasnac
J-300M","M0185",$99500.00,"0","Yes","78.7"" x 25.6""","63"" x 26.6"" x
26""","6,000","50","30","Table","Travels","RPM","Taper","ATC"

10378,"MACHINING CENTERS, VERTICAL, CNC","2006","Fadal","VMC-4020
HT","Fadal Multi-Processor CNC","Very Good","Yes","47"" x 20"" Table,
40"" x 20"" x 28"" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 30 ATC, Rigid
Tapping, High Torque, Graphics, 422 K Memory, Cool Power","2006 Fadal
VMC-4020 HT Fadal Multi-Processor CNC","M0185",$51500.00,"0","Yes","47""
x 20""","40"" x 20"" x
20""","10,000","40","24","Table","Travels","RPM","Taper","ATC"

10063,"MACHINING CENTERS, VERTICAL, CNC","2004","Fadal","VMC-8030
HT","Fadal 32MP CNC","Good","Yes","82.5"" x 30"" Table, 80"" x 30"" x
30"" Travels, 10,000 RPM, 22.5 HP, 40 Taper, 21 ATC, Coolant Through
Spindle, Rigid Tapping, Remote Jog Handle, High Torque Motor, Coolant
System, Chip Conveyor","2004 Fadal VMC-8030 HT Fadal 32MP
CNC","M0185",$74500.00,"0","Yes","82.5"" x 30""","80"" x 30"" x
30""","10,000","40","21","Table","Travels","RPM","Taper","ATC"

10623,"MACHINING CENTERS, VERTICAL, CNC","2007","Fadal","VMC-4020
FX","Fanuc OiMC","Very Good","Yes",,"2007 Fadal VMC-4020 FX Fanuc
OiMC","M0185",$69900.00,"0","Yes","47.94"" x 20""","40"" x 20"" x
28""","10,000","40","21","Table","Travels","RPM","Taper","ATC"

10606,"MACHINING CENTERS, VERTICAL, CNC","1997","Fadal","VMC-8030
HT","Fadal 88HS","Very Good","Yes","82.5"" x 30"" Table, 80"" x 30"" x
30"" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 21 ATC, Coolant System,
High Torque, Coolant System, Remote Jog Handle","1997 Fadal VMC-8030 HT
Fadal 88HS","M0185",$86500.00,"0","Yes","82.5"" x 30""","80"" x 30"" x
30""","10,000","40","21","Table","Travels","RPM","Taper","ATC"

10601,"MACHINING CENTERS, VERTICAL, CNC","1997","Fadal","VMC-6030
HT","Fadal 88HS","Good","Yes",,"1997 Fadal VMC-6030 HT Fadal
88HS","M0185",$39500.00,"0","Yes","62.5"" x 30""","60"" x 30"" x
30""","10,000","40","21","Table","Travels","RPM","Taper","ATC"

9014,"MACHINING CENTERS, VERTICAL, CNC","1999","Fadal","VMC-6030","Fadal
32MP CNC","Good","Yes",,"1999 Fadal VMC-6030 Fadal 32MP
CNC","M0185",$54900.00,"0","Yes","62.5"" x 30""","60"" x 30"" x
30""","10,000","40","30","Table","Travels","RPM","Taper","ATC"

10562,"MACHINING CENTERS, VERTICAL, CNC","1996","Fadal","VMC-15
XT","Fadal 88HS","Good","Yes",,"1996 Fadal VMC-15 XT Fadal
88HS","M0185",,"0","Yes","38.5"" x 16""","30"" x 16"" x
28""","7,500","40","15","Table","Travels","RPM","Taper","ATC"

8884,"MACHINING CENTERS, VERTICAL, CNC","2004","Fadal","VMC-8030","Fadal
32MP CNC","Very Good","Yes","82.5"" x 30"" Table, 80"" x 30"" x 30""
Travels, 10,000 RPM, 40 Taper, 22.5 HP, 24 Side Mount ATC, Rigid
Tapping, RS-232 Port, Coolant System, 8 MB Expanded Memory, Tsudokoma
RN-320R Rotary Table With Tailstock, Remote Jog Handle, New Spindle,
7,500 Power On Hours","2004 Fadal VMC-8030 Fadal 32MP
CNC","M0185",$95000.00,"-1","Yes","82.5"" x 30""","80"" x 30"" x
30""","10,000","40","24","Table","Travels","RPM","Taper","ATC"

9739,"MACHINING CENTERS, VERTICAL,
CNC","1998","Fadal","VMC-5020A","Fadal 88HS","Good","Yes",,"1998 Fadal
VMC-5020A Fadal 88HS","M0185",$34500.00,"0","Yes","58"" x 20""","50"" x
20"" x 28""","7,500","40","21","Table","Travels","RPM","Taper","ATC"

9748,"MACHINING CENTERS, VERTICAL, CNC","1986","Fadal","VMC-4020","Fadal
88HS","Good","Yes",,"1986 Fadal VMC-4020 Fadal
88HS","M0185",$18500.00,"-1","Yes","47.94"" x 20""","40"" x 20"" x
18""","10,000","40","21","Table","Travels","RPM","Taper","ATC"

10430,"MACHINING CENTERS, VERTICAL, CNC","2007","Fadal","VMC-4020
HT","Fanuc 18i","Very Good","Yes","47"" x 20"" Table, 40"" x 20"" x 28""
Travels, 10,000 RPM, 40 Taper, 22.5 HP, 24 ATC, Rigid Tapping, High
Torque, Coolant System, Cool Power, Extended Z-Travel","2007 Fadal
VMC-4020 HT Fanuc 18i","M0185",$59900.00,"0","Yes","47"" x 20""","40"" x
20"" x 28""","10,000","40","24","Table","Travels","RPM","Taper","ATC"

10410,"MACHINING CENTERS, VERTICAL, CNC","1993","Fadal","VMC-6030
HT","Fadal 88HS","Good","Yes",,"1993 Fadal VMC-6030 HT Fadal
88HS","M0185",$34500.00,"0","Yes","62.5"" x 30""","60"" x 30"" x
30""","10,000","40","21","Table","Travels","RPM","Taper","ATC"

10163,"MACHINING CENTERS, VERTICAL, CNC","1996","Fadal","VMC-15
XT","Fadal 88HS","Very Good","Yes",,"1996 Fadal VMC-15 XT Fadal
88HS","M0185",$19500.00,"0","Yes","38.5"" x 16""","30"" x 16"" x
28""","7,500","40","21","Table","Travels","RPM","Taper","ATC"

10551,"MACHINING CENTERS, VERTICAL,
CNC","1994","Fadal","VMC-4020","Fadal 88HS","Good","Yes","47"" x 20""
Table, 40"" x 20"" x 28"" Travels, 10,000 RPM, 40 Taper, 15 HP, 21 ATC,
Rigid Tapping, Extended Z-Travel, 4th Axis Pre-Wired","1994 Fadal
VMC-4020 Fadal 88HS","M0185",$32500.00,"0","Yes","47"" x 20""","40"" x
20"" x 28""","10,000","40","21","Table","Travels","RPM","Taper","ATC"

10297,"MACHINING CENTERS, VERTICAL, CNC","2004","Fadal","VMC-4020
HT","Fadal 88HS","Excellent","Yes","47"" x 20"" Table, 40"" x 20"" x
28"" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 30 ATC, Rigid Tapping, High
Torque, Graphics, 422 K Memory, Cool Power","2004 Fadal VMC-4020 HT
Fadal 88HS","M0185",$49900.00,"0","Yes","47"" x 20""","40"" x 20"" x
20""","10,000","40","24","Table","Travels","RPM","Taper","ATC"

10279,"MACHINING CENTERS, VERTICAL,
CNC","2005","Fadal","VMC-4020","Fadal Multi-Processor CNC","Very
Good","Yes","47"" x 20"" Table, 40"" x 20"" x 28"" Travels, 10,000 RPM,
40 Taper, 22.5 HP, 30 ATC, Rigid Tapping, High Torque, Graphics, 422 K
Memory, Cool Power","2005 Fadal VMC-4020 Fadal Multi-Processor
CNC","M0185",$35000.00,"0","Yes","48"" x 20""","40"" x 20"" x
20""","10,000","40","21","Table","Travels","RPM","Taper","ATC"

9908,"MACHINING CENTERS, VERTICAL, CNC","1996","Fadal","VMC-6030
HT","Fadal 88HS","Good","Yes",,"1996 Fadal VMC-6030 HT Fadal
88HS","M0185",$44500.00,"0","Yes","62.5"" x 30""","60"" x 30"" x
30""","10,000","40","21","Table","Travels","RPM","Taper","ATC"

10092,"MACHINING CENTERS, VERTICAL,
CNC","1998","Fadal","VMC-6030","Fadal 32MP CNC","Good","Yes",,"1998
Fadal VMC-6030 Fadal 32MP CNC","M0185",$34950.00,"0","Yes","62.5"" x
30""","60"" x 30"" x
30""","10,000","40","30","Table","Travels","RPM","Taper","ATC"

10225,"MACHINING CENTERS, VERTICAL, CNC","1989","Fadal","VMC-4020
HT","Fadal 88","Good","Yes",,"1989 Fadal VMC-4020 HT Fadal
88","M0185",$12500.00,"0","Yes","47"" x 20""","40"" x 20"" x
20""","10,000","40","21","Table","Travels","RPM","Taper","ATC"

10108,"MACHINING CENTERS, VERTICAL, CNC","2004","Fadal","VMC-8030
HT","Fadal 32MP CNC","Very Good","Yes","82.5"" x 30"" Table, 80"" x 30""
x 30"" Travels, 10,000 RPM, 22.5 HP, 40 Taper, 21 ATC, Coolant Through
Spindle, Rigid Tapping, High Speed CPU, Remote Jog Handle, High Torque
Motor, Coolant System","2004 Fadal VMC-8030 HT Fadal 32MP
CNC","M0185",$72500.00,"0","Yes","82.5"" x 30""","80"" x 30"" x
30""","10,000","40","21","Table","Travels","RPM","Taper","ATC"

10109,"MACHINING CENTERS, VERTICAL, CNC","1997","Fadal","VMC-15
XT","Fadal 88HS","Very Good","Yes",,"1997 Fadal VMC-15 XT Fadal
88HS","M0185",$21500.00,"0","Yes","38.5"" x 16""","30"" x 16"" x
20""","7,500","40","21","Table","Travels","RPM","Taper","ATC"

9687,"MACHINING CENTERS, VERTICAL, CNC","2001","Fadal","VMC-8030","Fadal
Multi-Processor CNC","Very Good","Yes",,"2001 Fadal VMC-8030 Fadal
Multi-Processor CNC","M0185",$69500.00,"0","Yes","82.5"" x 30""","80"" x
30"" x 30""","10,000","40","21","Table","Travels","RPM","Taper","ATC"

8719,"MACHINING CENTERS, VERTICAL,
CNC","1994","Femco","VMC-1685","Mitsubishi Meldas
M-3","Good","Yes",,"1994 Femco VMC-1685 Mitsubishi Meldas
M-3","M0185",$36000.00,"0","Yes","74.8"" x 33.5""","63"" x 31.5"" x
27.6""","4,000","50","32","Table","Travels","RPM","Taper","ATC"

10064,"MACHINING CENTERS, VERTICAL, CNC","1989","Giddings and
Lewis","Model 10VS","G&L 8000B","Very Good","Yes",,"1989 Giddings and
Lewis Model 10VS G&L 8000B","M0185",,"-1","Yes","54"" x 26""","48"" x
24"" x 31.5""","4,000","50","40","Table","Travels","RPM","Taper","ATC"

9929,"MACHINING CENTERS, VERTICAL, CNC","1998","Haas","VF-OE","Haas 32
BIT","Very Good","Yes","36"" x 14"" Table, 30"" x 16"" x 20"" Travels,
7,500 RPM, 40 Taper, 20 HP, 20 ATC, Chip Auger, Rigid Tapping, RS-232
Port, Brushless Servo, 4th Axis Ready, Haas HRT-160 Rotary Table, Quick
Code, Programmable Coolant, 3.5"" Floppy Drive, 22,802 On Time, 8,616
Cycle Start and 6,000 Cutting Hours, Only Cut Aluminum","1998 Haas VF-OE
Haas 32 BIT","M0185",$28500.00,"-1","Yes","36"" x 14""","30"" x 16"" x
20""","7,500","40","20","Table","Travels","RPM","Taper","ATC"

10538,"MACHINING CENTERS, VERTICAL, CNC","2004","Haas","VF-2 SS","Haas
32 BIT","Very Good","Yes",,"2004 Haas VF-2 SS Haas 32
BIT","M0185",$62900.00,"0","Yes","36"" x 14""","30"" x 16"" x
20""","12,000","40","25","Table","Travels","RPM","Taper","ATC"

10408,"MACHINING CENTERS, VERTICAL, CNC","1999","Haas","VF-10/40","Haas
32 BIT","Good","Yes","120"" x 28"" Table, 7,500 RPM, 40 Taper, 30 HP, 24
ATC, 4th Axis Interface, Rigid Tapping, 3.5"" Floppy Drive, Programmable
Coolant Nozzel, Coolant Through Spindle, Chip Auger, Haas HRT-310BL
Fourth Axis Rotary Table, Two (2) Speed Gear Box, Fourth and Fifth Axis
Interface, Renishaw MP10 Touch Probe","1999 Haas VF-10/40 Haas 32
BIT","M0185",$118000.00,"0","Yes","120"" x 28""","120"" x 32"" x
30""","7,500","4","24","Table","Travels","RPM","Taper","ATC"

8369,"MACHINING CENTERS, VERTICAL, CNC","2000","Haas","VF-3","Haas 32
BIT","Good","Yes","48"" x 18"" Table, 40"" x 20"" x 25"" Travels, 7,500
RPM, 20 HP, 40 Taper, 20 ATC, 4th Axis Interface (no tables), Chip
Auger, Programmable Coolant, Rigid Tapping, 1 MB Memory, 3.5"" Floppy,
RS-232 Port, High Intensity Lighting, Spindle Orientation","2000 Haas
VF-3 Haas 32 BIT","M0185",$34500.00,"-1","Yes","48"" x 18""","40"" x
20"" x 20""","7,500","40","21","Table","Travels","RPM","Taper","ATC"

10353,"MACHINING CENTERS, VERTICAL, CNC","2000","Haas","VF-5/50","Haas
32 BIT","Good","Yes","52"" x 23"" Table, 50"" x 26"" x 25"" Travels,
5,000 RPM, 50 Taper, 30 HP, 30 ATC, Programmable Coolant, Rigid Tapping,
Remote Pulse Generator, Geared Head, 4th Axis Drive,","2000 Haas VF-5/50
Haas 32 BIT","M0185",$76000.00,"0","Yes","52"" x 23""","50"" x 26"" x
25""","5,000","50","31","Table","Travels","RPM","Taper","ATC"

10618,"MACHINING CENTERS, VERTICAL, CNC","2007","Haas","VF-2","Haas 32
BIT","Very Good","Yes",,"2007 Haas VF-2 Haas 32
BIT","M0185",$68000.00,"0","Yes","36"" x 14""","30"" x 16"" x
20""","10,000","40","24","Table","Travels","RPM","Taper","ATC"

10270,"MACHINING CENTERS, VERTICAL,
CNC","1997","Haas","VF-9/40","Creative Evolution","Good","Yes",,"1997
Haas VF-9/40 Creative Evolution","M0185",$89500.00,"0","Yes","84"" x
36""","84"" x 40"" x
30""","10,000","40","20","Table","Travels","RPM","Taper","ATC"

10507,"MACHINING CENTERS, VERTICAL, CNC","2007","Haas","VF-9/50","Haas
32 BIT","Very Good","Yes",,"2007 Haas VF-9/50 Haas 32
BIT","M0185",$195000.00,"0","Yes","84"" x 36""","84"" x 40"" x
30""","10,000","50","30","Table","Travels","RPM","Taper","ATC"

10245,"MACHINING CENTERS, VERTICAL, CNC","2001","Haas","VF-5/40","Haas
32 BIT","Very Good","Yes",,"2001 Haas VF-5/40 Haas 32
BIT","M0185",$55000.00,"0","Yes","52"" x 23""","50"" x 26"" x
25""","7,500","40","25","Table","Travels","RPM","Taper","ATC"

10539,"MACHINING CENTERS, VERTICAL, CNC","2006","Haas","VF-2 SS
YT","Haas 32 BIT","Very Good","Yes",,"2006 Haas VF-2 SS YT Haas 32
BIT","M0185",$69900.00,"0","Yes","36"" x 18""","30"" x 20"" x
20""","12,000","40","24","Table","Travels","RPM","Taper","ATC"

10188,"MACHINING CENTERS, VERTICAL, CNC","2006","Haas","VF-4 SS","Haas
32 BIT","Very Good","Yes",,"2006 Haas VF-4 SS Haas 32
BIT","M0185",$77000.00,"0","Yes","52"" x 18""","50"" x 20"" x
25""","12,000","40","25","Table","Travels","RPM","Taper","ATC"

10514,"MACHINING CENTERS, VERTICAL, CNC","2006","Haas","VF-4","Haas 32
BIT","Very Good","Yes",,"2006 Haas VF-4 Haas 32
BIT","M0185",$79900.00,"0","Yes","52"" x 18""","50"" x 20"" x
25""","7,500","40","24","Table","Travels","RPM","Taper","ATC"

10068,"MACHINING CENTERS, VERTICAL, CNC","2008","Haas","VF-11/50","Haas
32 BIT","New, Never Used","No",,"2008 Haas VF-11/50 Haas 32
BIT","M0185",$235000.00,"-1","Yes","120"" x 28""","120"" x 40"" x
30""","7,500","50","31","Table","Travels","RPM","Taper","ATC"

10459,"MACHINING CENTERS, VERTICAL, CNC","2004","Haas","VF-4 SS","Haas
32 BIT","Very Good","Yes",,"2004 Haas VF-4 SS Haas 32
BIT","M0185",$78000.00,"0","Yes","52"" x 18""","50"" x 20"" x
25""","12,000","40","25","Table","Travels","RPM","Taper","ATC"

10478,"MACHINING CENTERS, VERTICAL, CNC","1999","Haas","VF-6/40","Haas
32 BIT","Good","Yes",,"1999 Haas VF-6/40 Haas 32
BIT","M0185",$62000.00,"0","Yes","64"" x 28""","64"" x 32"" x
30""","7,500","40","24","Table","Travels","RPM","Taper","ATC"

10549,"MACHINING CENTERS, VERTICAL, CNC","1997","Haas","VF-4","Haas 32
BIT","Good","Yes",,"1997 Haas VF-4 Haas 32
BIT","M0185",$41000.00,"0","Yes","52"" x 18""","50"" x 20"" x
25""","7,500","40","20","Table","Travels","RPM","Taper","ATC"

9989,"MACHINING CENTERS, VERTICAL, CNC","1997","Haas","VF-8/40","Haas 32
BIT","Good","Yes",,"1997 Haas VF-8/40 Haas 32
BIT","M0185",$40000.00,"-1","Yes","64"" x 36""","64"" x 40"" x
30""","10,000","40","20","Table","Travels","RPM","Taper","ATC"

10512,"MACHINING CENTERS, VERTICAL, CNC","1997","Haas","VF-9/40","Haas
32 BIT","Very Good","Yes",,"1997 Haas VF-9/40 Haas 32
BIT","M0185",$98500.00,"0","Yes","84"" x 36""","84"" x 40"" x
30""","7,500","40","30","Table","Travels","RPM","Taper","ATC"

10510,"MACHINING CENTERS, VERTICAL, CNC","1997","Haas","VF-4","Haas 32
BIT","Good","Yes",,"1997 Haas VF-4 Haas 32
BIT","M0185",$28000.00,"0","Yes","52"" x 18""","50"" x 20"" x
25""","10,000","40","21","Table","Travels","RPM","Taper","ATC"

10508,"MACHINING CENTERS, VERTICAL, CNC","2000","Haas","VF-3","Haas 32
BIT","Very Good","Yes",,"2000 Haas VF-3 Haas 32
BIT","M0185",$36000.00,"0","Yes","48"" x 18""","40"" x 20"" x
25""","10,000","40","32","Table","Travels","RPM","Taper","ATC"

9927,"MACHINING CENTERS, VERTICAL, CNC","1995","Haas","VF-4","Haas 32
BIT","Good","Yes","52"" x 18"" Table, 50"" x 20"" x 25"" Travels, 7,500
RPM, 15 HP, 21 ATC, 4th Axis Interface, Quick Code, Rigid Tapping, Chip
Auger, 3.5"" Floppy Drive, Two Speed Geared Head, Programmable Coolant,
RS-232 Port, 4th Axis Ready - Great Running Inexpensive Haas!","1995
Haas VF-4 Haas 32 BIT","M0185",$26500.00,"0","Yes","52"" x 18""","50"" x
20"" x 25""","7,500","40","21","Table","Travels","RPM","Taper","ATC"

10589,"MACHINING CENTERS, VERTICAL, CNC","2000","Haas","TM-1","Haas 32
BIT","Excellent","Yes",,"2000 Haas TM-1 Haas 32
BIT","M0185",$24500.00,"0","Yes","47.75"" x 10.5""","30"" x 12"" x
16""","4,000","40","10","Table","Travels","RPM","Taper","ATC"

7695,"MACHINING CENTERS, VERTICAL, CNC","1998","Haas","VF-5/40","Haas 32
BIT","Good","Yes",,"1998 Haas VF-5/40 Haas 32
BIT","M0185",$59900.00,"0","Yes","52"" x 23""","50"" x 26"" x
25""","7,500","40","20","Table","Travels","RPM","Taper","ATC"

10047,"MACHINING CENTERS, VERTICAL, CNC","2005","Mazak","Nexus
VCN-510C","Mazatrol Fusion 640 M","Very Good","Yes",,"2005 Mazak Nexus
VCN-510C Mazatrol Fusion 640 M","M0185",$74500.00,"0","Yes","51.1"" x
21.6""","41.3"" x 20"" x
20""","12,000","40","30","Table","Travels","RPM","Taper","ATC"

10226,"MACHINING CENTERS, VERTICAL,
CNC","1990","Mazak","VQC-15/40","Mazatrol M-32","Needs
Repair","Yes","35.4"" x 16.1"" Table, 22"" x 16"" x 15.75"" Travels,
6,000 RPM, 10 HP, 16 Station ATC, Coolant System, Color CRT","1990 Mazak
VQC-15/40 Mazatrol M-32","M0185",,"-1","On Way","35.4"" x 16.1""","22""
x 16"" x
15.75""","6,000","40","16","Table","Travels","RPM","Taper","ATC"

10138,"MACHINING CENTERS, VERTICAL, CNC","2009","Mazak","Votex
815/120","Fanuc 31iMA","Very Good","Yes",,"2009 Mazak Votex 815/120
Fanuc 31iMA","M0185",$574000.00,"0","Yes","127.56"" x 31.9""","120"" x
31.89"" x
24.02""","13,000","50","60","Table","Travels","RPM","Taper","ATC"

9584,"MACHINING CENTERS, VERTICAL,
CNC","1996","Mazak","VTC-16B","Mazatrol M-32B","Good","Yes","57.5"" x
16.1""Table, 44"" x 16"" x 20"" Travels, 7,000 RPM, 40 Taper, 15 HP, 24
ATC, EIA / ISO Input Function, Conversational Programming, Graphic
Display, Helical Interpolation, Auto Tool Length Measurement, Rigid
Tapping","1996 Mazak VTC-16B Mazatrol
M-32B","M0185",$25000.00,"-1","Yes","57.48"" x 16.1""","44.09"" x
16.14"" x
20.08""","7,000","40","24","Table","Travels","RPM","Taper","ATC"

10065,"MACHINING CENTERS, VERTICAL, CNC","1998","Mazak","MTV-655 /
80N","Mazatrol M-Plus","Very Good","Yes",,"1998 Mazak MTV-655 / 80N
Mazatrol M-Plus","M0185",$96000.00,"-1","Yes","88"" x 25""","78.74"" x
25.6"" x 25.6""","6,000","50","30","Table","Travels","RPM","Taper","ATC"

9583,"MACHINING CENTERS, VERTICAL,
CNC","1999","Mazak","VTC-16B","Mazatrol Fusion 640 M","Very
Good","Yes","57.5"" x 16.1""Table, 44"" x 16"" x 20"" Travels, 7,000
RPM, 40 Taper, 15 HP, 24 ATC, EIA / ISO Input Function, Conversational
Programming, Graphic Display, Helical Interpolation, Auto Tool Length
Measurement, Rigid Tapping","1999 Mazak VTC-16B Mazatrol Fusion 640
M","M0185",$32500.00,"-1","Yes","57.48"" x 16.1""","44.09"" x 16.14"" x
20.08""","8,000","40","24","Table","Travels","RPM","Taper","ATC"

10610,"MACHINING CENTERS, VERTICAL,
CNC","1996","Mazak","VTC-20B","Mazatrol M-32B","Fair","Yes",,"1996 Mazak
VTC-20B Mazatrol M-32B","M0185",$18000.00,"0","Yes","57.48"" x
20.1""","44.09"" x 20.08"" x
20.08""","8,000","40","24","Table","Travels","RPM","Taper","ATC"

10487,"MACHINING CENTERS, VERTICAL, CNC","1995","Mazak","V-655 /
80","Mazatrol T-32","Good","Yes",,"1995 Mazak V-655 / 80 Mazatrol
T-32","M0185",$76500.00,"0","Yes","68.5"" x 25.59""","78"" x 25.59"" x
25.59""","6,000","50","30","Table","Travels","RPM","Taper","ATC"

9988,"MACHINING CENTERS, VERTICAL, CNC","1998","Mazak","MTV-655 /
80N","Mazatrol M-Plus","Good","Yes",,"1998 Mazak MTV-655 / 80N Mazatrol
M-Plus","M0185",$96000.00,"-1","Yes","88"" x 25""","78.74"" x 25.6"" x
25.6""","6,000","50","30","Table","Travels","RPM","Taper","ATC"

10534,"MACHINING CENTERS, VERTICAL,
CNC","2000","Mazak","VTC-300C","Mazatrol Fusion 640 M","Very
Good","Yes",,"2000 Mazak VTC-300C Mazatrol Fusion 640
M","M0185",$112000.00,"0","Yes","78.74"" x 30""","65.35"" x 30"" x
26""","10,000","40","24","Table","Travels","RPM","Taper","ATC"

10497,"MACHINING CENTERS, VERTICAL, CNC","2004","Mazak","Nexus
VCN-410A","Mazatrol Fusion 640 M","Good","Yes",,"2004 Mazak Nexus
VCN-410A Mazatrol Fusion 640 M","M0185",$52500.00,"0","Yes","35.43"" x
16.14""","22.05"" x 16.14"" x
20.08""","12,000","40","30","Table","Travels","RPM","Taper","ATC"

9610,"MACHINING CENTERS, VERTICAL,
CNC","1998","Mazak","VTC-20B","Mazatrol Fusion 640
M","Good","Yes",,"1998 Mazak VTC-20B Mazatrol Fusion 640
M","M0185",$42500.00,"0","Yes","57.4"" x 20.08""","44.09"" x 20.08"" x
20.08""","8,000","40","24","Table","Travels","RPM","Taper","ATC"

8843,"MACHINING CENTERS, VERTICAL, CNC","1999","Mighty","Viper
VMC-950","Mitsubishi Magic 640","Very Good","Yes","50"" x 18"" Table,
40"" x 20"" x 24.8"" Travels, 8,000 RPM, 40 Taper, 25 HP, 21 ATC, Color
Graphic Control, Remote Jog Handle, Chip Auger, Chip Flood Wash System,
Hard Drive, Mighty Chip Cart, 3,000 Hours On Machine. Control Completely
Rebuilt By Mitsubishi March 2005","1999 Mighty Viper VMC-950 Mitsubishi
Magic 640","M0185",$24500.00,"-1","Yes","50"" x 18""","40"" x 20"" x
24.8""","8,000","40","21","Table","Travels","RPM","Taper","ATC"

10380,"MACHINING CENTERS, VERTICAL, CNC","1995","Mighty Comet","VMC-1100
PH","Control ???","Good","Yes",,"1995 Mighty Comet VMC-1100 PH Control
???","M0185",,"-1","On Way","49"" x 24""","42"" x 22"" x
25""","8,000","40","24","Table","Travels","RPM","Taper","ATC"

10604,"MACHINING CENTERS, VERTICAL, CNC","1999","Mighty
Viper","VMC-2100","Fanuc 18M","Very Good","Yes","83"" x 41.3"" Table,
81"" x 41.3"" x 32.3"" Travels, 6,000 RPM, 30 HP, 50 Taper, 30 ATC, Full
Enclosure, Air Blast Through Spindle, Glass Scales, Spindle Chiller,
Color Monitor With Graphics, Chip Auger","1999 Mighty Viper VMC-2100
Fanuc 18M","M0185",$89900.00,"0","Yes","83"" x 41.3""","81"" x 41.3"" x
32.3""","6,000","50","30","Table","Travels","RPM","Taper","ATC"

9168,"MACHINING CENTERS, VERTICAL, CNC","2000","Mighty Viper","VMC-1600
A","Mitsubishi Magic 640","Very Good","Yes",,"2000 Mighty Viper VMC-1600
A Mitsubishi Magic 640","M0185",$74900.00,"0","Yes","66.9"" x
29.5""","63"" x 31"" x
23.5""","8,000","40","32","Table","Travels","RPM","Taper","ATC"

9516,"MACHINING CENTERS, VERTICAL,
CNC","1998","Milltronics","VM-24","Centurion 6","Very Good","Yes",,"1998
Milltronics VM-24 Centurion 6","M0185",$24500.00,"0","Yes","45"" x
24""","40"" x 24"" x
24""","6,000","40","20","Table","Travels","RPM","Taper","ATC"

9420,"MACHINING CENTERS, VERTICAL,
CNC","1996","Milltronics","Partner","Centurion 7","Very
Good","Yes",,"1996 Milltronics Partner Centurion
7","M0185",$20000.00,"-1","Yes","45"" x 16""","34"" x 16"" x
20""","6,000","40","12","Table","Travels","RPM","Taper","ATC"

9763,"MACHINING CENTERS, VERTICAL, CNC","2000","Milltronics","CSS-1000
CGI","Centurion 6 SLS","Very Good","Yes","45"" x 16"" Table, 30"" x 16""
x 16"" Travels, 8,000 RPM, 24 HP, 20 ATC, Reverse Engineering","2000
Milltronics CSS-1000 CGI Centurion 6
SLS","M0185",$58000.00,"-1","Yes","45"" x 16""","30"" x 16"" x
20""","8,000","40","20","Table","Travels","RPM","Taper","ATC"

9943,"MACHINING CENTERS, VERTICAL, CNC","2006","Milltronics","RH-33
XP","Centurion 7","Very Good","Yes",,"2006 Milltronics RH-33 XP
Centurion 7","M0185",$69900.00,"0","Yes","86"" x 32""","78"" x 33"" x
28""","15,000","40","24","Table","Travels","RPM","Taper","ATC"

10070,"MACHINING CENTERS, VERTICAL,
CNC","1999","Mitsubishi","MV-70E","Mitsubishi 520M","Very
Good","Yes",,"1999 Mitsubishi MV-70E Mitsubishi
520M","M0185",$59500.00,"0","Yes","65"" x 27.6""","49.2"" x 27.6"" x
25.6""","12,000","50","40","Table","Travels","RPM","Taper","ATC"

10112,"MACHINING CENTERS, VERTICAL,
CNC","1985","Mitsui-Seiki","VR-3A","Fanuc 6M","Good","Yes","29.5"" x
20.08"" Table, 27.56"" x 17.7"" x 17.7"" Travels, 6,000 RPM, 40 Taper,
10 HP, 20 ATC, Coolant System, Remote Jog Handle","1985 Mitsui-Seiki
VR-3A Fanuc 6M","M0185",$34000.00,"-1","Yes","29.5"" x 20.08""","27.56""
x 17.7"" x
17.7""","6,000","40","20","Table","Travels","RPM","Taper","ATC"

10503,"MACHINING CENTERS, VERTICAL,
CNC","1995","Monarch","VMC-175B","Fanuc 16M","Good","Yes",,"1995 Monarch
VMC-175B Fanuc 16M","M0185",$49500.00,"0","Yes","84"" x 30""","76"" x
44"" x 36""","6,000","50","30","Table","Travels","RPM","Taper","ATC"

10603,"MACHINING CENTERS, VERTICAL,
CNC","1997","Monarch","VMC-150B","Fanuc 16MB","Good","Yes",,"1997
Monarch VMC-150B Fanuc 16MB","M0185",$59500.00,"0","Yes","64"" x
30""","50"" x 30"" x
26""","6,000","50","30","Table","Travels","RPM","Taper","ATC"

9996,"MACHINING CENTERS, VERTICAL, CNC","2000","Mori-Seiki","SV-500 B /
40","Fanuc 18M","Very Good","Yes","43.31"" x 23.62"" Table, 31.5"" x
20.08"" x 20.08"" Travels, 10,000 RPM, 22 HP, 30 ATC, Rigid Tapping,
Helical Interpolation","2000 Mori-Seiki SV-500 B / 40 Fanuc
18M","M0185",$69000.00,"0","Yes","43.31"" x 23.62""","31.5"" x 20.08"" x
20.08""","10,000","40","30","Table","Travels","RPM","Taper","ATC"

10581,"MACHINING CENTERS, VERTICAL, CNC","2010","Mori-Seiki","NV-7000 /
50","Mori-Seiki MSX-701 IV","Like New","Yes",,"2010 Mori-Seiki NV-7000 /
50 Mori-Seiki MSX-701 IV","M0185",$325000.00,"0","Yes","67"" x
30""","40.2"" x 20.1"" x
20.1""","8,000","50","30","Table","Travels","RPM","Taper","ATC"

9998,"MACHINING CENTERS, VERTICAL, CNC","2000","Mori-Seiki","SV-503 B /
40","Fanuc 18M","Good","Yes","52"" x 23.6"" Table, 31.5"" x 20.1"" x
20.1"" Travels, 10,000 RPM's, 50 Taper, 30 HP, 30 ATC, 1,653
Rapids","2000 Mori-Seiki SV-503 B / 40 Fanuc
18M","M0185",$89000.00,"0","Yes","43.3"" x 23.6""","31.5"" x 20.1"" x
20.1""","10,000","50","30","Table","Travels","RPM","Taper","ATC"

9971,"MACHINING CENTERS, VERTICAL, CNC","2003","Mori-Seiki","NV-5000A /
50","Mitsubishi MSC-501 (18iMA)","Very Good","Yes",,"2003 Mori-Seiki
NV-5000A / 50 Mitsubishi MSC-501
(18iMA)","M0185",$99000.00,"0","Yes","43.3"" x 23.6""","31.5"" x 20.1""
x 29.1""","8,000","50","30","Table","Travels","RPM","Taper","ATC"

9571,"MACHINING CENTERS, VERTICAL, CNC","2003","Mori-Seiki","NV-5000A /
40","Mitsubishi MSC-501 (18iMA)","Excellent","Yes",,"2003 Mori-Seiki
NV-5000A / 40 Mitsubishi MSC-501
(18iMA)","M0185",$136500.00,"0","Yes","43.3"" x 23.6""","31.5"" x 20.1""
x 20.1""","12,000","40","30","Table","Travels","RPM","Taper","ATC"

8991,"MACHINING CENTERS, VERTICAL,
CNC","1992","Mori-Seiki","MV-65","Yasnac I80M","Very Good","Yes",,"1992
Mori-Seiki MV-65 Yasnac I80M","M0185",$112000.00,"0","Yes","66.93"" x
25.59""","60"" x 25.6"" x
25.6""","4,000","40","30","Table","Travels","RPM","Taper","ATC"

9311,"MACHINING CENTERS, VERTICAL, CNC","2004","Mori-Seiki","Duracenter
5","Mori-Seiki MSX-501","Very Good","Yes",,"2004 Mori-Seiki Duracenter 5
Mori-Seiki MSX-501","M0185",$72000.00,"0","Yes","43.3"" x
23.6""","31.5"" x 20.1"" x
20.1""","12,000","40","20","Table","Travels","RPM","Taper","ATC"

9383,"MACHINING CENTERS, VERTICAL,
CNC","1989","Mori-Seiki","MV-JR","Yasnac MX-3","Good","No",,"1989
Mori-Seiki MV-JR Yasnac MX-3","M0185",$15500.00,"-1","Yes","35.4"" x
17.7""","22"" x 16.1"" x
16.1""","8,000","40","20","Table","Travels","RPM","Taper","ATC"

10511,"MACHINING CENTERS, VERTICAL, CNC","2005","Mori-Seiki","NV-5000A1B
/ 40","Fanuc 18iM","Very Good","Yes",,"2005 Mori-Seiki NV-5000A1B / 40
Fanuc 18iM","M0185",$119500.00,"0","Yes","52"" x 23.6""","40.2"" x
20.1"" x
20.1""","14,000","40","30","Table","Travels","RPM","Taper","ATC"

9855,"MACHINING CENTERS, VERTICAL, CNC","2006","Mori-Seiki","NV-5000A /
40","Fanuc 18M","Good","Yes",,"2006 Mori-Seiki NV-5000A / 40 Fanuc
18M","M0185",$125000.00,"0","Yes","43.3"" x 23.6""","31.5"" x 27.95"" x
20.1""","8,000","50","30","Table","Travels","RPM","Taper","ATC"

8742,"MACHINING CENTERS, VERTICAL,
CNC","1985","Mori-Seiki","MV-JR","Yasnac MX-2","Good","Yes",,"1985
Mori-Seiki MV-JR Yasnac MX-2","M0185",$15000.00,"-1","Yes","35"" x
17""","22"" x 16"" x
18""","6,000","40","30","Table","Travels","RPM","Taper","ATC"

9392,"MACHINING CENTERS, VERTICAL, CNC","2003","Mori-Seiki","NV-5000A /
50","Mitsubishi MSC-501 (18iMA)","Very Good","Yes",,"2003 Mori-Seiki
NV-5000A / 50 Mitsubishi MSC-501
(18iMA)","M0185",$129500.00,"0","Yes","43.3"" x 23.6""","31.5"" x
27.95"" x
20.1""","8,000","50","30","Table","Travels","RPM","Taper","ATC"

10499,"MACHINING CENTERS, VERTICAL, CNC","2001","Makino","Max
65S","Makino Pro 3","Very Good","Yes",,"2001 Makino Max 65S Makino Pro
3","M0185",$79500.00,"0","Yes","33.46"" x 17.72""","25.59"" x 15.75"" x
15.75""","12,000","40","20","Table","Travels","RPM","Taper","ATC"

9391,"MACHINING CENTERS, VERTICAL, CNC","2003","Makino","S56","Makino
Pro 3","Very Good","Yes",,"2003 Makino S56 Makino Pro
3","M0185",$89500.00,"0","Yes","39.4"" x 19.7""","35.4"" x 19.7"" x
17.7""","13,000","40","20","Table","Travels","RPM","Taper","ATC"

9384,"MACHINING CENTERS, VERTICAL,
CNC","1987","Matsuura","MC-760V","Yasnac MX-2","Good","No",,"1987
Matsuura MC-760V Yasnac MX-2","M0185",$16500.00,"-1","Yes","45.25"" x
16.14""","29.92"" x 17.32"" x
19.09""","4,500","40","30","Table","Travels","RPM","Taper","ATC"

9158,"MACHINING CENTERS, VERTICAL,
CNC","1994","Matsuura","MC-600-VF","Yasnac I80","Needs
Repair","Yes",,"1994 Matsuura MC-600-VF Yasnac
I80","M0185",$19500.00,"-1","Yes","34.6"" x 15.7""","23.62"" x 16.14"" x
18.5""","8,000","40","30","Table","Travels","RPM","Taper","ATC"

10545,"MACHINING CENTERS, VERTICAL, CNC","2003","Mazak","Nexus
VCN-410B","Mazatrol Fusion 640 M","Very Good","Yes",,"2003 Mazak Nexus
VCN-410B Mazatrol Fusion 640 M","M0185",$53000.00,"0","Yes","43.43"" x
16.14""","30"" x 16.14"" x
20.08""","12,000","40","30","Table","Travels","RPM","Taper","ATC"

8715,"MACHINING CENTERS, VERTICAL,
CNC","1998","Mazak","VTC-20C","Mazatrol M-Plus","Good","Yes","79"" x
20.08"" Table, 65"" x 20.08"" x 20.08"" Travels, 7,000 RPM, 40 Taper, 20
HP, 48 ATC, Conversational Programming, EIA / ISO Input Function,
Graphic Display, Rigid Tapping, Chip Conveyor, Center Divider For
Running As a Two (2) Station Machine, Fix Table Traveling Column","1998
Mazak VTC-20C Mazatrol M-Plus","M0185",$48000.00,"-1","Yes","79"" x
20.08""","65"" x 20.08"" x
20.08""","7,000","40","48","Table","Travels","RPM","Taper","ATC"

10145,"MACHINING CENTERS, VERTICAL,
CNC","1998","Mazak","VTC-20C","Mazatrol M-Plus","Good","Yes","78.7"" x
20.01"" Table, 64.09"" x 20.08"" x 20.05"" Travels, 7,000 RPM, 40 Taper,
20 HP, 24 ATC, Conversational Programming, EIA / ISO Input Function,
Graphic Display, Manual Indexer, Chip Conveyor, Tool Breakage Detection,
Tool Life Monitoring, Renishaw Touch Probe Prep","1998 Mazak VTC-20C
Mazatrol M-Plus","M0185",$39500.00,"0","Yes","78.7"" x 20.01""","64.09""
x 20.08"" x
20.05""","8,000","40","24","Table","Travels","RPM","Taper","ATC"

9835,"MACHINING CENTERS, VERTICAL,
CNC","1997","Mazak","VTC-16B","Mazatrol M-32B","Good","Yes",,"1997 Mazak
VTC-16B Mazatrol M-32B","M0185",,"-1","On Way","57.48"" x
16.1""","44.09"" x 16.14"" x
20.08""","10,000","40","24","Table","Travels","RPM","Taper","ATC"

9832,"MACHINING CENTERS, VERTICAL,
CNC","1997","Mazak","VTC-20B","Mazatrol M-Plus","Good","Yes",,"1997
Mazak VTC-20B Mazatrol M-Plus","M0185",$44500.00,"0","Yes","57.4"" x
20.08""","44.09"" x 20.08"" x
20.08""","7,000","40","24","Table","Travels","RPM","Taper","ATC"

8797,"MACHINING CENTERS, VERTICAL,
CNC","1996","Mazak","VTC-16B","Mazatrol M-Plus","Very
Good","Yes","57.5"" x 16.1"" Table, 44"" x 16"" x 20"" Travels, 8,000
RPM, 40 Taper, 15 HP, 24 ATC, EIA / ISO Input Function, Conversational
Programming, Auto Tool Length Measurement, Rigid Tapping","1996 Mazak
VTC-16B Mazatrol M-Plus","M0185",$30000.00,"-1","Yes","57.48"" x
16.1""","44.09"" x 16.14"" x
20.08""","8,000","40","24","Table","Travels","RPM","Taper","ATC"

7596,"TABLES, ROTARY",,"Giddings and Lewis","48""",,"Good","Yes",,"
Giddings and Lewis 48""
","T0140",$19500.00,"0","Yes","48""","1/2°","Manual","27,000
Lbs",,"Table","Indexing","Type","Weight Cap.",

8074,"TABLES, ROTARY",,"Giddings and Lewis","48"" x 48"" Rotary
Table",,"Good","Yes",," Giddings and Lewis 48"" x 48"" Rotary Table
","T0140",$4500.00,"0","Yes","48"" x 48""","1°","Manual","20,000
Lbs",,"Table","Indexing","Type","Weight Cap.",

8075,"TABLES, ROTARY",,"Giddings and Lewis","60"" x 60"" Rotary
Table",,"Good","Yes",," Giddings and Lewis 60"" x 60"" Rotary Table
","T0140",$4900.00,"0","Yes","60"" x
60""","1°","Manual","20,000",,"Table","Indexing","Type","Weight Cap.",

8146,"TABLES, ROTARY",,"Knight","48"" x 48""",,"Good","Yes",," Knight
48"" x 48"" ","T0140",$8950.00,"0","Yes","48"" x
48""","1°","Manual","20,000 Lbs",,"Table","Indexing","Type","Weight
Cap.",

10236,"TABLES, ROTARY","1980","Rotab","48""",,"Good","No",,"1980 Rotab
48"" ","T0140",$39500.00,"0","Yes","48""","1°","Electric","10,000
Lbs",,"Table","Indexing","Type","Weight Cap.",

8677,"TABLES, ROTARY",,"Troyke","U-18",,"Very Good",,," Troyke U-18
","T0140",$1800.00,"-1","Yes","18""","1°","Manual","540
Lbs",,"Table","Indexing","Type","Weight Cap.",

8328,"TESTERS, ROUNDNESS","2002","Precitech Precision","FMS 8150",,"Very
Good","Yes",,"2002 Precitech Precision FMS 8150
","T2300",$13000.00,"-1","Yes","1",,,,,"Machine Style","Max. Work
Area","Max. Work Surface",,

10170,"THREAD ROLLERS",,"Lian Feng","LF-40",,"Very Good","Yes",," Lian
Feng LF-40 ","T2520",$15000.00,"0","Yes","1",,,,,"Work Diameter","Thread
Length","Die Speeds","Teeth Per Inch","Roll Pressure"

10174,"THREAD ROLLERS",,"Reed","A22",,"Good","Yes",," Reed A22
","T2520",$24500.00,"0","Yes","1",,,,,"Work Diameter","Thread
Length","Die Speeds","Teeth Per Inch","Roll Pressure"

10168,"THREAD ROLLERS","1970","Reed","B112",,"Very Good","Yes",,"1970
Reed B112 ","T2520",$22500.00,"0","Yes","1",,,,,"Work Diameter","Thread
Length","Die Speeds","Teeth Per Inch","Roll Pressure"

9184,"TOOL PRESETTING MACHINES","1999","Zoller","Bravo L Premium",,"Very
Good","Yes",,"1999 Zoller Bravo L Premium
","T3870",$11500.00,"0","Yes","1",,,,,"Measuring Range","Measuring
Diameter","Travels","Max. Weight",

9818,"VIBRATORS (Incl. Vibratory
Finishers)","1987","Almco","OR-10",,"Very Good","Yes",,"1987 Almco OR-10
","V2753",$95000.00,"-1","Yes","1",,,,,"Cubic Feet","Tub","Load","Max.
Part","HP"

7105,"VIBRATORS (Incl. Vibratory
Finishers)","1977","Sweco","FC-70",,"Good","Yes","Bowl Capacity - 70
Cubic Feet, Barrel Diameter - 92"", 20 HP, Internal Separation /
Automatic Unloading, Polyurethane Lined Bowl, Additional 10"" Collar
Added to the Top","1977 Sweco FC-70
","V2753",$22000.00,"-1","Yes","1",,,,,"Cubic Feet","Tub","Load","Max.
Part","HP"

8196,"VIBRATORY FEEDERS",,"Matrix","Bowl Feeder",,"Excellent","Yes",,"
Matrix Bowl Feeder
","V3004",$6500.00,"-1","Yes","1",,,,,"Capacity","Barrel","Channel
Size","HP",

10103,"WATER JET CUTTING, CNC","2008","Flow
International","I-6012","Flowmaster PC Based Controller","Very
Good","Yes",,"2008 Flow International I-6012 Flowmaster PC Based
Controller","W0760",$139500.00,"0","Yes","1",,,,,"Table","Table
Load","Travels","HP","PSI"

8177,"WATER JET CUTTING, CNC","2003","Jet Edge","AMC 3030",,"Very
Good","Yes",,"2003 Jet Edge AMC 3030
","W0760",$99500.00,"0","Yes","1",,,,,"Table","Table
Load","Travels","HP","PSI"

8703,"WELDERS, ROTARY TABLE TYPE",,"Bancroft","350",,"Good","Yes",,"
Bancroft 350 ","W2802",$11500.00,"0","Yes","1",,,,,"Clamping
Force","Vertical Stroke","Rotation Speed","AMP",

8294,"WELDING POSITIONERS","2007"," --Select Mfg Here--","10,000
Lbs",,"Very Good","Yes",,"2007 --Select Mfg Here-- 10,000 Lbs
","W3752",$19500.00,"0","Yes","1",,,,,"Cap.","Table","HP",,

9245,"WELDING
POSITIONERS","2008","Pandjiris","60-12-AB",,"New","Yes",,"2008 Pandjiris
60-12-AB ","W3752",$29900.00,"0","Yes","1",,,,,"Cap.","Table","HP",,

9246,"WELDING POSITIONERS",,"Ransome","60",,"Very Good","Yes",," Ransome
60 ","W3752",$16000.00,"0","Yes","1",,,,,"Cap.","Table","HP",,

8313,"WELDING POSITIONERS",,"SVF","72""",,"Fair","Yes",," SVF 72""
","W3752",$14500.00,"0","Yes","1",,,,,"Cap.","Table","HP",,

8421,"WIRE MACHINERY, FORMING",,"U.S. Tool Company","#33
Multi-Slide",,"Very Good","Yes","Maximum Stock Width 2 1/2"", Maximum
Stock Thickness 3/32"", Maximum Feed Length 12 1/2"", 40 - 160 SPM, 5
HP, Twelve (12) Channel Touch Screen Control, Vari Drive (like new), Air
Clutch and Brake, Two (2) Press Heads, One (1) Double Length Bolster,
One (1) Box of Accessories, Rack & Pinion Stripper Head, Front Cut Off
Unit, Vacuum System for Slugs, Positive Check Feed, Stock Mister"," U.S.
Tool Company #33 Multi-Slide
","W5903",$36000.00,"-1","Yes","1",,,,,"Width","Thickness","Length","SPM","HP"

7995,"MACHINING CENTERS, VERTICAL,
CNC","1993","Mori-Seiki","MV-40","Yasnac I80","Very Good","Yes","35.3""
x 18"" Table, 22"" x 16.15"" x 18.12"" Travels, 8,000 RPM, 40 Taper, 22
HP, Very Low Hours","1993 Mori-Seiki MV-40 Yasnac
I80","M0185",$28000.00,"-1","Yes","35.3"" x 18""","22"" x 16.15"" x
18.12""","8,000","40","20","Table","Travels","RPM","Taper","ATC"

9003,"MACHINING CENTERS, VERTICAL, CNC","1996","Okada","GMC-654","Fanuc
160MC","Good","Yes",,"1996 Okada GMC-654 Fanuc
160MC","M0185",$39500.00,"0","Yes","23.6"" x 19.7""","23.6"" x 19.7"" x
15.7""","25,000","30","8","Table","Travels","RPM","Taper","ATC"

9788,"MACHINING CENTERS, VERTICAL, CNC","1998","Okada","GMC-654","Fanuc
160MC","Very Good","Yes",,"1998 Okada GMC-654 Fanuc
160MC","M0185",$36500.00,"0","Yes","23.6"" x 19.7""","23.6"" x 19.7"" x
15.7""","25,000","30","8","Table","Travels","RPM","Taper","ATC"

9827,"MACHINING CENTERS, VERTICAL, CNC","1997","OKK","MCV-660","Fanuc
16M","Good","Yes",,"1997 OKK MCV-660 Fanuc
16M","M0185",$89500.00,"0","Yes","66.93"" x 25.59""","59.84"" x 25.98""
x 25.98""","4,500","50","24","Table","Travels","RPM","Taper","ATC"

10557,"MACHINING CENTERS, VERTICAL, CNC","2001","OKK","VM-7","OKK
NeoMatic 635 (Meldas)","Good","Yes","68"" x 32"" Table, 60.27"" x
29.17"" x 26.02"" Travels, 13,000 RPM, 50 Taper, 20 HP, 30 ATC, Two (2)
Speed Geared Head, Coolant Through Spindle, Rigid Tapping, Chip Augers,
Remote Jog Handle","2001 OKK VM-7 OKK NeoMatic 635
(Meldas)","M0185",$147000.00,"0","Yes","61.02"" x 29.13""","60.24"" x
29.13"" x
25.98""","13,000","50","30","Table","Travels","RPM","Taper","ATC"

9769,"MACHINING CENTERS, VERTICAL, CNC","1993","OKK","PCV-50","Fanuc
18M","Very Good",,,"1993 OKK PCV-50 Fanuc
18M","M0185",$24500.00,"0","Yes","36.2"" x 20.47""","28.34"" x 20.47"" x
20.47""","6,000","40","30","Table","Travels","RPM","Taper","ATC"

10364,"MACHINING CENTERS, VERTICAL, CNC","2006","OKK","VM-5 III","Fanuc
180iM","Excellent","Yes","59.06"" x 25.98""Table, 40"" x 20"" x 20""
Travels, 10,000 RPM, 50 Taper, 15 HP, 20 ATC, Coolant System, Spindle
Chiller,","2006 OKK VM-5 III Fanuc
180iM","M0185",$105000.00,"0","Yes","59.06"" x 25.98""","40.15"" x
20.08"" x
20.08""","10,000","40","30","Table","Travels","RPM","Taper","ATC"

10517,"MACHINING CENTERS, VERTICAL, CNC","2002","OKK","VM-5
II","Mitsubishi 635M","Very Good","Yes",,"2002 OKK VM-5 II Mitsubishi
635M","M0185",$112000.00,"0","Yes","41.34"" x 22.05""","40.15"" x
20.08"" x
20.08""","13,000","50","20","Table","Travels","RPM","Taper","ATC"

10579,"MACHINING CENTERS, VERTICAL, CNC","1999","Okuma","MC-60
VAE","OSP-7000M","Very Good","Yes",,"1999 Okuma MC-60 VAE
OSP-7000M","M0185",$69500.00,"0","Yes","70.87"" x 30.71""","59"" x
24.8"" x 24""","5,000","50","20","Table","Travels","RPM","Taper","ATC"

10571,"MACHINING CENTERS, VERTICAL, CNC","1996","Okuma","MX-45
VAE","OSP-7000M","Very Good","Yes",,"1996 Okuma MX-45 VAE
OSP-7000M","M0185",$34500.00,"0","Yes","39.27"" x 20.1""","30"" x
18.11"" x
17.70""","7,000","40","20","Table","Travels","RPM","Taper","ATC"

10489,"MACHINING CENTERS, VERTICAL, CNC","1996","Okuma","MX-45
VA","OSP-700M","Very Good","Yes",,"1996 Okuma MX-45 VA
OSP-700M","M0185",$25500.00,"0","Yes","29"" x 18.11""","22"" x 18.1"" x
17""","7,000","40","20","Table","Travels","RPM","Taper","ATC"

9502,"MACHINING CENTERS, VERTICAL, CNC","1997","Okuma","Cadet Mate
V-4020","OSP-5020MG","Very Good","Yes",,"1997 Okuma Cadet Mate V-4020
OSP-5020MG","M0185",$32500.00,"0","Yes","47.24"" x 20.08""","40"" x 20""
x 20""","8,000","40","20","Table","Travels","RPM","Taper","ATC"

9526,"MACHINING CENTERS, VERTICAL, CNC","1999","Okuma","MC-60
VAE","OSP-7000M","Good","Yes",,"1999 Okuma MC-60 VAE
OSP-7000M","M0185",$55900.00,"0","Yes","70.87"" x 30.71""","59"" x
24.8"" x 24""","5,000","50","32","Table","Travels","RPM","Taper","ATC"

9607,"MACHINING CENTERS, VERTICAL, CNC","1997","Okuma","Cadet Mate
V-4020","OSP-700M","Very Good","Yes",,"1997 Okuma Cadet Mate V-4020
OSP-700M","M0185",$29500.00,"0","Yes","47.24"" x 20.08""","40"" x 20"" x
20""","8,000","40","20","Table","Travels","RPM","Taper","ATC"

10447,"MACHINING CENTERS, VERTICAL, CNC","2002","Okuma","ES
V-4020","OSP-U10M","Good","Yes",,"2002 Okuma ES V-4020
OSP-U10M","M0185",$24500.00,"0","Yes","47.24"" x 20.08""","40"" x 20"" x
20""","8,000","40","20","Table","Travels","RPM","Taper","ATC"

8463,"MACHINING CENTERS, VERTICAL, CNC","1997","Okuma","MX-45
VAE","OSP-700M","Good","Yes",,"1997 Okuma MX-45 VAE
OSP-700M","M0185",$42500.00,"0","No","39.37"" x 18.11""","30"" x 18.11""
x 17.7""","7,000","40","20","Table","Travels","RPM","Taper","ATC"

10448,"MACHINING CENTERS, VERTICAL, CNC","2000","Okuma","Crown
V-4018","OSP-U10M","Very Good","Yes",,"2000 Okuma Crown V-4018
OSP-U10M","M0185",$38500.00,"0","Yes","48"" x 20""","40"" x 18.11"" x
17.72""","8,000","40","20","Table","Travels","RPM","Taper","ATC"

9614,"MACHINING CENTERS, VERTICAL, CNC","1999","Okuma","Cadet Mate
V-4020","OSP-700M","Good","Yes",,"1999 Okuma Cadet Mate V-4020
OSP-700M","M0185",$32500.00,"0","Yes","47.24"" x 20.08""","40"" x 20"" x
20""","8,000","40","20","Table","Travels","RPM","Taper","ATC"

9609,"MACHINING CENTERS, VERTICAL, CNC","2003","Okuma","ES
V-4020","OSP-U10M","Good","No",,"2003 Okuma ES V-4020
OSP-U10M","M0185",$32500.00,"0","Yes","47.24"" x 20.08""","40"" x 20"" x
20""","8,000","40","20","Table","Travels","RPM","Taper","ATC"

10486,"MACHINING CENTERS, VERTICAL, CNC","2001","Okuma","Crown
V-4018","OSP-U10M","Very Good","Yes",,"2001 Okuma Crown V-4018
OSP-U10M","M0185",$45000.00,"0","Yes","47.24"" x 20""","40"" x 18.11"" x
17.72""","12,000","40","20","Table","Travels","RPM","Taper","ATC"

9572,"MACHINING CENTERS, VERTICAL, CNC","2008","Okuma","Millac
853-PF","Fanuc 31i","Excellent","Yes",,"2008 Okuma Millac 853-PF Fanuc
31i","M0185",$522000.00,"0","Yes","126"" x 35.24""","120.08"" x 33.5"" x
27.56""","12,000","50","30","Table","Travels","RPM","Taper","ATC"

9137,"MACHINING CENTERS, VERTICAL, CNC","2000","Okuma","MX-45
VAE","OSP-700M","Very Good","Yes",,"2000 Okuma MX-45 VAE
OSP-700M","M0185",$29500.00,"0","Yes","39.37"" x 18.11""","30"" x
18.11"" x
17.7""","7,000","40","20","Table","Travels","RPM","Taper","ATC"

10531,"MACHINING CENTERS, VERTICAL, CNC","1999","Okuma","MC-60
VAE","OSP-7000M","Very Good","Yes",,"1999 Okuma MC-60 VAE
OSP-7000M","M0185",$69500.00,"0","Yes","70.87"" x 30.71""","59.06"" x
24.8"" x
24.02""","5,000","50","20","Table","Travels","RPM","Taper","ATC"

10616,"MACHINING CENTERS, VERTICAL, CNC","2006","Okuma","MC
V-4020","OSP-E100M","Excellent","Yes",,"2006 Okuma MC V-4020
OSP-E100M","M0185",$69500.00,"0","Yes","48"" x 20.08""","40"" x 20"" x
17.7""","15,000","40","20","Table","Travels","RPM","Taper","ATC"

10366,"MACHINING CENTERS, VERTICAL, CNC","1997","Okuma and
Howa","Millac-852V","Fanuc 16M","Very Good","Yes",,"1997 Okuma and Howa
Millac-852V Fanuc 16M","M0185",$119000.00,"0","Yes","86.60"" x
35.24""","80.71"" x 33.46"" x
29.53""","6,000","50","36","Table","Travels","RPM","Taper","ATC"

10429,"MACHINING CENTERS, VERTICAL, CNC","2000","Okuma and
Howa","Millac-511V","Fanuc 16MC","Very Good","Yes",,"2000 Okuma and Howa
Millac-511V Fanuc 16MC","M0185",$42500.00,"0","Yes","50"" x
20.08""","40"" x 20"" x
20.5""","10,000","40","24","Table","Travels","RPM","Taper","ATC"

9750,"MACHINING CENTERS, VERTICAL, CNC","1986","Okuma and Howa","Millac
4VA","Fanuc 6M","Good","Yes",,"1986 Okuma and Howa Millac 4VA Fanuc
6M","M0185",,"-1","On Way","51.18"" x 16.14""","32.28"" x 14.17"" x
19.09""","2,500","40","24","Table","Travels","RPM","Taper","ATC"

8282,"MACHINING CENTERS, VERTICAL, CNC","1997","Quantum","Q-1500
V","Quantum","Very Good","Yes",,"1997 Quantum Q-1500 V
Quantum","M0185",$59500.00,"0","Yes","94"" x 36""","62"" x 34"" x
32""","12,000","50","40","Table","Travels","RPM","Taper","ATC"

6373,"MACHINING CENTERS, VERTICAL, CNC","1990/05","Rambaudi","Rammatic
1400","Siemens 802D","Good","Yes",,"1990/05 Rambaudi Rammatic 1400
Siemens 802D","M0185",$195000.00,"-1","Yes","240"" x 55""","240"" x 50""
x 50""","3,500","50",,"Table","Travels","RPM","Taper","ATC"

7761,"MACHINING CENTERS, VERTICAL, CNC","1997","Sharnoa","HPM-40","Tiger
6","Very Good","Yes",,"1997 Sharnoa HPM-40 Tiger
6","M0185",$28000.00,"-1","Yes","47"" x 21""","40"" x 24"" x
22""","8,000","40","30","Table","Travels","RPM","Taper","ATC"

10346,"MACHINING CENTERS, VERTICAL,
CNC","1992","Sharnoa","SVC-80","Tiger 5","Good","Yes",,"1992 Sharnoa
SVC-80 Tiger 5","M0185",$29500.00,"0","Yes","82.6"" x 33.8""","80"" x
36"" x 28""","3,600","50","20","Table","Travels","RPM","Taper","ATC"

7757,"MACHINING CENTERS, VERTICAL, CNC","1990","Sharnoa","SV-36","Tiger
5","Very Good","Yes",,"1990 Sharnoa SV-36 Tiger
5","M0185",$22000.00,"-1","Yes","43"" x 19""","30"" x 20"" x
22","4,000","40","24","Table","Travels","RPM","Taper","ATC"

8805,"MACHINING CENTERS, VERTICAL,
CNC","1998","Supermax","YCM-V218B","Fanuc 18M","Very Good","Yes",,"1998
Supermax YCM-V218B Fanuc 18M","M0185",$119500.00,"0","Yes","90"" x
30""","83"" x 34""x
30""","4,000","50","30","Table","Travels","RPM","Taper","ATC"

8873,"MACHINING CENTERS, VERTICAL, CNC","1997","Supermax","Max-1
Rebel","Mitsubishi 520M","Good","Yes","33.07"" x 16.54"" Table, 25.59""
x 16.14"" x 24.21"" Travels, 8,000 RPM, 10 HP, 40 Taper, 24 ATC, Side
Mount Tool Change","1997 Supermax Max-1 Rebel Mitsubishi
520M","M0185",$14500.00,"0","Yes","33.07"" x 16.54""","25.59"" x 16.14""
x 24.21""","8,000","40","16","Table","Travels","RPM","Taper","ATC"

10421,"MACHINING CENTERS, VERTICAL,
CNC","1996","Supermax","Max-8","Fanuc OM","Very Good","Yes",,"1996
Supermax Max-8 Fanuc OM","M0185",$55500.00,"-1","Yes","66.9"" x
29.9""","65"" x 30"" x
30""","8,000","40","24","Table","Travels","RPM","Taper","ATC"

8851,"MACHINING CENTERS, VERTICAL,
CNC","2001","Supermax","V-2110B","Fanuc 18M","Very Good","Yes",,"2001
Supermax V-2110B Fanuc 18M","M0185",$149500.00,"0","Yes","90.6"" x
40.1""","82.6"" x 40.1"" x
30""","4,000","50","30","Table","Travels","RPM","Taper","ATC"

10530,"MACHINING CENTERS, VERTICAL, CNC","2004","Takumi-Seiki","V15
EL","Fanuc OiMB","Very Good","Yes",,"2004 Takumi-Seiki V15 EL Fanuc
OiMB","M0185",$74500.00,"0","Yes","1",,,,,"Table","Travels","RPM","Taper","ATC"

8741,"MACHINING CENTERS, VERTICAL, CNC","2006","Toyoda","BM-1600","Fanuc
18iMB","Very Good","Yes",,"2006 Toyoda BM-1600 Fanuc
18iMB","M0185",$130000.00,"0","Yes","70.8"" x 31.5""","63"" x 31.5"" x
27.5""","6,000","50","30","Table","Travels","RPM","Taper","ATC"

10264,"MACHINING CENTERS, VERTICAL, CNC
W-PALLETS","1998","Daewoo","DMV-400 APC","Mitsubishi
520M","Excellent","Yes",,"1998 Daewoo DMV-400 APC Mitsubishi
520M","M0185P",,"-1","Yes","25.6"" x 17.7""","22"" x 15.7"" x
22.4""","10,000","40","30","Table","Travels","RPM","Taper","ATC"

10543,"MACHINING CENTERS, VERTICAL, CNC
W-PALLETS","1997","Daewoo","DMV-400 APC","Mitsubishi 520M","Very
Good","Yes",,"1997 Daewoo DMV-400 APC Mitsubishi
520M","M0185P",$45000.00,"0","Yes","25.6"" x 17.7""","22"" x 15.7"" x
22.4""","10,000","40","30","Table","Travels","RPM","Taper","ATC"

10287,"MACHINING CENTERS, VERTICAL, CNC
W-PALLETS","1997","Daewoo","DMV-400 APC","Fanuc 18M","Good","Yes",,"1997
Daewoo DMV-400 APC Fanuc 18M","M0185P",$42500.00,"0","Yes","25.6"" x
17.7""","22"" x 15.7"" x
22.4""","10,000","40","30","Table","Travels","RPM","Taper","ATC"

9079,"MACHINING CENTERS, VERTICAL, CNC
W-PALLETS","2001","Fadal","VMC-4020 APC","Fadal 88HS","Very
Good","Yes",,"2001 Fadal VMC-4020 APC Fadal
88HS","M0185P",$48900.00,"0","Yes","52"" x 18""","40"" x 20"" x
20""","10,000","40","30","Table","Travels","RPM","Taper","ATC"

10229,"MACHINING CENTERS, VERTICAL, CNC W-PALLETS","1997","Haas","VF-3
APC","Haas 32 BIT","Good","Yes",,"1997 Haas VF-3 APC Haas 32
BIT","M0185P",$29500.00,"0","Yes","48"" x 18""","40"" x 20"" x
25""","7,500","40","20","Table","Travels","RPM","Taper","ATC"

10248,"MACHINING CENTERS, VERTICAL, CNC W-PALLETS","2006","Haas","VF-3
APC","Haas 32 BIT","Very Good","Yes",,"2006 Haas VF-3 APC Haas 32
BIT","M0185P",$76000.00,"0","Yes","48"" x 18""","40"" x 20"" x
25""","10,000","40","20","Table","Travels","RPM","Taper","ATC"

9651,"MACHINING CENTERS, VERTICAL, CNC W-PALLETS","1997","Haas","VF-3
APC","Haas 32 BIT","Very Good","Yes",,"1997 Haas VF-3 APC Haas 32
BIT","M0185P",$36500.00,"-1","Yes","48"" x 18""","40"" x 20"" x
25""","10,000","40","20","Table","Travels","RPM","Taper","ATC"

10550,"MACHINING CENTERS, VERTICAL, CNC
W-PALLETS","2003","Hardinge","VMC-1000 II","Fanuc 18M","Very
Good","Yes",,"2003 Hardinge VMC-1000 II Fanuc
18M","M0185P",$59500.00,"0","Yes","44"" x 20""","40.16"" x 20.08"" x
20.08""","12,000","40","20","Table","Travels","RPM","Taper","ATC"

10379,"MACHINING CENTERS, VERTICAL, CNC
W-PALLETS","1995","Kitamura","Mycenter-O Sparkchanger","Yasnac
MX-3","Good","Yes",,"1995 Kitamura Mycenter-O Sparkchanger Yasnac
MX-3","M0185P",,"-1","On Way","18.1"" x 12""","12"" x 10"" x
12""","7,500","40","16","Table","Travels","RPM","Taper","ATC"

9623,"MACHINING CENTERS, VERTICAL, CNC
W-PALLETS","1996","Kitamura","Mycenter-1 APC","Fanuc
OM","Good","Yes",,"1996 Kitamura Mycenter-1 APC Fanuc
OM","M0185P",,"-1","Yes","30.94"" x 13.97""","20"" x 14"" x
16""","13,000","35","20","Table","Travels","RPM","Taper","ATC"

8486,"MACHINING CENTERS, VERTICAL, CNC
W-PALLETS","1998","Makino","SNC-106 A30","Fanuc Pro 3","Very
Good","Yes",,"1998 Makino SNC-106 A30 Fanuc Pro
3","M0185P",$46500.00,"0","Yes","43.3"" x 23.62""","39.37"" x 23.62"" x
15.75""","15,000","40","30","Table","Travels","RPM","Taper","ATC"

10525,"MACHINING CENTERS, VERTICAL, CNC
W-PALLETS","2004","Makino","S33","Fanuc Pro 3","Very Good","Yes",,"2004
Makino S33 Fanuc Pro 3","M0185P",$77000.00,"0","Yes","23.6"" x
15.7""","25.8"" x 19.7"" x
17.7""","13,000","40","30","Table","Travels","RPM","Taper","ATC"

10509,"MACHINING CENTERS, VERTICAL, CNC
W-PALLETS","2006","Matsuura","MAM72-3VS","Fanuc 16iM","Very
Good","Yes",,"2006 Matsuura MAM72-3VS Fanuc
16iM","M0185P",$342000.00,"0","Yes","5.11""","26.5"" x 15.5"" x
26""","15,000","40","60","Table","Travels","RPM","Taper","ATC"

10532,"MACHINING CENTERS, VERTICAL, CNC
W-PALLETS","2008","Mazak","Variaxis 730-5X","Mazatrol Matrix","Like
New","Yes","Two 24.8"" x 19.6"" Pallets, 28.7"" x 33.4"" x 22"" Travels,
150° A-Axis, 10,000 RPM, 50 Taper, 120 ATC, Mazak Super Flow V8 Variable
High Pressure Coolant, Renishaw NC-4 Laser Tool Measurement, Hydraulic
Fixture Prep, Loaded With Options","2008 Mazak Variaxis 730-5X Mazatrol
Matrix","M0185P",$395000.00,"-1","Yes","24.8"" x 19.6""","28.7"" x
33.4"" x 22""","10,000","50","120","Table","Travels","RPM","Taper","ATC"

8257,"MACHINING CENTERS, VERTICAL, CNC W-PALLETS","2006","Mikron","HSM
600U","Heidenhain iTNC530","Very Good","Yes",,"2006 Mikron HSM 600U
Heidenhain iTNC530","M0185P",$415000.00,"0","No","11.81"" x
11.81""","31.5"" x 23.62"" x
19.68""","36,000","50","170","Table","Travels","RPM","Taper","ATC"

10375,"MACHINING CENTERS, VERTICAL, CNC
W-PALLETS","1991","Mori-Seiki","MV-40 APC","Fanuc
OMC","Good","Yes","35.3"" x 18"" Table, 22"" x 16.15"" x 18.12""
Travels, 8,000 RPM, 40 Taper, 22 HP, Very Low Hours","1991 Mori-Seiki
MV-40 APC Fanuc OMC","M0185P",$39500.00,"0","Yes","43.3"" x
17.7""","31.5"" x 16.15"" x
20.1""","8,000","40","30","Table","Travels","RPM","Taper","ATC"

10352,"MACHINING CENTERS, VERTICAL, CNC
W-PALLETS","1996","Mori-Seiki","M-300A1","Fanuc
MF-M6","Good","Yes",,"1996 Mori-Seiki M-300A1 Fanuc
MF-M6","M0185P",$55000.00,"0","Yes","12.4"" x 12.4""","15.7"" x 11.8"" x
19.4""","10,000","40","40","Table","Travels","RPM","Taper","ATC"

10376,"MACHINING CENTERS, VERTICAL, CNC
W-PALLETS","1993","Mori-Seiki","MV-40 APC","Fanuc
MF-M4","Good","Yes","35.3"" x 18"" Table, 22"" x 16.15"" x 18.12""
Travels, 8,000 RPM, 40 Taper, 22 HP, Very Low Hours","1993 Mori-Seiki
MV-40 APC Fanuc MF-M4","M0185P",$34500.00,"0","Yes","35.3"" x
15""","31.5"" x 16.15"" x
20.1""","7,500","40","20","Table","Travels","RPM","Taper","ATC"

10345,"MILLERS, CAM","1995","Awea","SP-3016","Fanuc
OMC","Good","Yes",,"1995 Awea SP-3016 Fanuc
OMC","M1204",$99500.00,"0","Yes","1",,,,,"Table","Travels","RPM","HP","Taper"

8848,"MILLERS, PLANER TYPE (Including Millers,
Slab)","1953","Rockford","36"" x 21""",,"Very Good","Yes",,"1953
Rockford 36"" x 21"" ","M2050",$8000.00,"-1","Yes","36"" x 21""","36"" x
30"" x 23""",,"30",,"Table","Travels","RPM","HP","Taper"

9730,"MILLERS, PLANER TYPE, BRIDGE STYLE",,"Futurmill","72"" x
240""",,"Good","Yes",," Futurmill 72"" x 240""
","M2050B",,"0","Yes","72"" x 240""","84"" x 72"" x
240""","566","30","50","Table","Travels","RPM","HP","Taper"

8112,"MILLERS, PLANER TYPE, BRIDGE STYLE","1968","Gray-Futurmill","64""
x 288""",,"Very Good","Yes",,"1968 Gray-Futurmill 64"" x 288""
","M2050B",$120000.00,"0","Yes","64"" x 288""","73"" x 52"" x
288""","900","30","50","Table","Travels","RPM","HP","Taper"

8115,"MILLERS, PLANER TYPE, BRIDGE STYLE","1965","Gray-Futurmill","38""
x 360""",,"Good","Yes",,"1965 Gray-Futurmill 38"" x 360""
","M2050B",$139500.00,"0","Yes","38"" x 360""","73"" x
360""","890","30","50","Table","Travels","RPM","HP","Taper"

9877,"MILLERS, PLANER TYPE, OPENSIDE",,"Futurmill","72"" x 240""",,"Very
Good","Yes",," Futurmill 72"" x 240""
","M2050O",$64000.00,"0","Yes","72"" x 240""","84"" x 72"" x
240""","566","30","50","Table","Travels","RPM","HP","Taper"

5758,"MILLERS, UNIVERSAL","1982","Bridgeport","Series
I",,"Fair","Yes",,"1982 Bridgeport Series I
","M2680",$3500.00,"-1","Yes","48"" x 9""","36"" x 12"" x
16""","4,200","2",,"Table","Travels","RPM","HP","Taper"

9288,"MILLERS, UNIVERSAL","1994","Bridgeport","Series
I",,"Good","Yes",,"1994 Bridgeport Series I
","M2680",$8500.00,"0","Yes","48"" x 9""","32"" x 12"" x
5""","4,200","2","R 8","Table","Travels","RPM","HP","Taper"

8732,"MILLERS, UNIVERSAL","1991","Bridgeport","Series I",,"Very
Good","Yes",,"1991 Bridgeport Series I
","M2680",$6500.00,"0","Yes","48"" x 9""","30"" x 12"" x
5""","4,200","2","R 8","Table","Travels","RPM","HP","Taper"

8943,"MILLERS, UNIVERSAL","1980","Bridgeport","Series
I",,"Good","Yes",,"1980 Bridgeport Series I
","M2680",$4500.00,"0","Yes","42"" x 9""","30"" x 12"" x
5""","4,200","2","R 8","Table","Travels","RPM","HP","Taper"

8952,"MILLERS, UNIVERSAL","1979","Bridgeport","Series
I",,"Good","Yes",,"1979 Bridgeport Series I
","M2680",$4200.00,"0","Yes","48"" x 9""","36"" x 12"" x
5""","4,200","2","R 8","Table","Travels","RPM","HP","Taper"

8704,"MILLERS, VERT-UNIVERSAL NC and
CNC","2002","Birmingham","B3VS","Centroid M 400","Very Good","Yes","60""
x 12"" Table, 41"" x 20"" x 23"" Travels, 5,160 RPM, 5 HP, 40 Taper,
Engraving Software, Hard Drive, 128 MB Ram, RS-232 & Ethernet Ports,
Inverter Drive System, 3.5"" Floppy, Remote Jog Hand Wheel for X, Y, Z &
4th, Power Draw Bar, Digitizing Probe & Software, TT-1 Probe for Tool
Measuring, Unlimited File Size Software, BobCadCam Design Software,
Laser Mapping of Ballscrews ISO 1725 Certification","2002 Birmingham
B3VS Centroid M 400","M2833",,"-1","Yes","60"" x 12""","41"" x 20"" x
5""","5,160","5","40","Table","Travels","RPM","HP","Taper"

8727,"MILLERS, VERT-UNIVERSAL NC and CNC","1997","Bridgeport","EZ-Trak
DX Series I","Bridgeport DX-32","VeryGood","Yes",,"1997 Bridgeport
EZ-Trak DX Series I Bridgeport DX-32","M2833",$12500.00,"0","Yes","48""
x 9""","30"" x 12"" x 5""","4,200","2","R
8","Table","Travels","RPM","HP","Taper"

8752,"MILLERS, VERT-UNIVERSAL NC and CNC","1996","Bridgeport","BV
2XT","Bridgeport DX-32","Excellent","Yes",,"1996 Bridgeport BV 2XT
Bridgeport DX-32","M2833",$14500.00,"0","Yes","48"" x 9""","30"" x 12""
x 5""","4,200","2","40","Table","Travels","RPM","HP","Taper"

9042,"MILLERS, VERT-UNIVERSAL NC and CNC","1998","Hurco","Hawk 40
Advantage Series","Ultramax IV/Dual CRT","Good","Yes","58"" x 13""
Table, 40"" x 20"" x 20"" Travels, 4,000 RPM, 5 HP, Power Draw Bar,
Hardened and Ground Box Ways, DFX Translator","1998 Hurco Hawk 40
Advantage Series Ultramax IV/Dual
CRT","M2833",$22000.00,"-1","Yes","58"" x 13""","40"" x 20"" x
20""","4,000","5","40","Table","Travels","RPM","HP","Taper"

9787,"MILLERS, VERT-UNIVERSAL NC and
CNC","2000","Milltronics","MB-19","Centurion 6 SLS","Very
Good","Yes",,"2000 Milltronics MB-19 Centurion 6
SLS","M2833",$16000.00,"0","Yes","50"" x 13""","32"" x 19"" x
22.5""","5,000","10","40","Table","Travels","RPM","HP","Taper"

10348,"MILLERS, VERT-UNIVERSAL NC and CNC","1999","Southwestern
Industries","Prototrak K3","Proto Trak A.G.E. III","Very
Good","Yes",,"1999 Southwestern Industries Prototrak K3 Proto Trak
A.G.E. III","M2833",$14500.00,"0","Yes","50"" x 10""","32"" x 16"" x
16""","4,200","3","R 8","Table","Travels","RPM","HP","Taper"

10404,"MILLERS, VERT-UNIVERSAL NC and CNC","2007","Southwestern
Industries","Prototrak K3","EMX Control","Very Good","Yes",,"2007
Southwestern Industries Prototrak K3 EMX
Control","M2833",$13000.00,"0","Yes","50"" x 10""","32"" x 16"" x
16""","4,200","3","R 8","Table","Travels","RPM","HP","Taper"

10029,"MILLERS, VERT-UNIVERSAL NC and CNC","1999","Southwestern
Industries","DPM","Proto Trak A.G.E. III","Good","Yes",,"1999
Southwestern Industries DPM Proto Trak A.G.E.
III","M2833",$17500.00,"0","Yes","50"" x 10""","31"" x 17"" x
23.5""","4,200","3","40","Table","Travels","RPM","HP","Taper"

10054,"MILLERS, VERT-UNIVERSAL NC and CNC","2001","Southwestern
Industries","DPM","Proto Trak A.G.E. III","Very Good","Yes",,"2001
Southwestern Industries DPM Proto Trak A.G.E.
III","M2833",$19500.00,"0","Yes","50"" x 10""","31"" x 17"" x
23.5""","4,200","3","40 NMTB","Table","Travels","RPM","HP","Taper"

7853,"MILLERS, VERT-UNIVERSAL NC and CNC","1985","Tree","Journeyman
325","Delta Dynapath 20M/CRT","Good","Yes","44"" x 10"" Table, 27"" x
14"" x 6"" x 15.75"" Travels, 6,000 RPM, 5 HP, 40 Taper, 4th Axis Rotary
Table","1985 Tree Journeyman 325 Delta Dynapath
20M/CRT","M2833",$7500.00,"-1","Yes","44"" x 10""","27"" x 14"" x
6""","3,500","3","40","Table","Travels","RPM","HP","Taper"

8618,"MIXERS, LIQUID","1988","De Dietrich","Mixer",,"Good","Yes",,"1988
De Dietrich Mixer
","M3249",$10500.00,"-1","Yes","1",,,,,"Capacity","Tank
Opening","Speed","HP",

10587,"PRESSES, O.B.I.","1980/2005","Minster","Hummingbird",,"Very
Good","Yes",,"1980/2005 Minster Hummingbird
","P6150",$29500.00,"-1","Yes","30","31"" x
20""","1.26""","1,300","15","Tons","Bed","Ram","SPM","HP"

9811,"PRESSES, O.B.I.","1989","Rousselle","2F",,"Good","Yes","15 Tons,
11"" x 16"" Bed, 5"" x 5"" Bed Opening, 8"" Shut Height, 12"" Throat,
2"" Stroke, 160 SPM, 1.5"" Ram Adjustment, Air Clutch and Brake, Dual
Palm Safety Buttons, Safety Cage Around Opening","1989 Rousselle 2F
","P6150",$2500.00,"-1","Yes","15","11"" x
16""","1.5""","160","15","Tons","Bed","Ram","SPM","HP"

8368,"PRESSES, SSDC","1984","Verson","150-B2-60",,"Very
Good","Yes",,"1984 Verson 150-B2-60
","P7135",$34500.00,"0","Yes","150","60"" x 36""","60"" x
36""","70","35","Tons","Bed","Ram","SPM","HP"

8370,"PRESSES, SSDC","1968","Verson","OBG",,"Very Good","Yes",,"1968
Verson OBG ","P7135",$24500.00,"0","Yes","150","50"" x 30""","34"" x
24""","35","35","Tons","Bed","Ram","SPM","HP"

8367,"PRESSES, STRAIGHT SIDE, CRANKLESS","1966","Miller","C-150",,"Very
Good","Yes",,"1966 Miller C-150
","P7125",$49500.00,"0","Yes","150","50"" x 33""","34"" x
24""","40","15","Tons","Bed","Ram","SPM","HP"

8829,"ROLLS, ANGLE BENDING","1975","Buffalo","2
VBR",,"Good","Yes",,"1975 Buffalo 2 VBR
","R4704",$22500.00,"-1","Yes","5"" x 5"" x 3/8""","6"" x 3/4""","2
3/4""","35","20","Angle Out","Flat","Round","FPM","HP"

8806,"ROLLS, ANGLE BENDING",,"Roundo","R-4S",,"Very Good","Yes",,"
Roundo R-4S ","R4704",$34500.00,"0","Yes","4"" x 4"" x 3/8""","5"" x
5/8"" / 4"" x 1""","4""","40","12","Angle Out","Flat","Round","FPM","HP"

9170,"ROLLS, ANGLE BENDING","1996","Roundo","R-13-S",,"Very
Good","Yes","Angle Bend Capacity - 8"" x 8"" x 1 - 1/4"", Diameter of
Bending Rolls 32"", 108 HP, Large Selection of Dies For Pipe and Beams,
Large Selection of Spacers, Oversized Shaft, Motors & Drive,
Hydraulically Controlled Guide Rolls - Up / Down / In & Out, Full
Pendant Control, Five (5) Sets of Pipe Rolls","1996 Roundo R-13-S
","R4704",$950000.00,"-1","Yes","8"" x 8"" x 1 - 1/4""","16"" x
2-3/8""","10 1/2""",,"108","Angle Out","Flat","Round","FPM","HP"

9264,"ROLLS, ANGLE BENDING",,"Roundo","R-4M",,"Rebuilt","Yes",," Roundo
R-4M ","R4704",$39500.00,"0","Yes","3 1/2"" x 3 1/2"" x 3/8""","7"" x
1""","3""","23","8.6","Angle Out","Flat","Round","FPM","HP"

9109,"ROLLS, PLATE BENDING, INITIAL PINCH","1976/2003","Bertsch","Model
14",,"Very Good","Yes",,"1976/2003 Bertsch Model 14
","R5603",$109500.00,"0","Yes","120""","1""","15""","15""","30","Length","Thinkness","Roll
Dia. Top","Roll Dia. Bot.","HP"

8659,"ROLLS, PLATE BENDING, INITIAL PINCH","2009","Birlik","HSM
4",,"New","Yes",,"2009 Birlik HSM 4
","R5603",$175000.00,"0","Yes","122""","1""","16.54""","12.99""","40","Length","Thinkness","Roll
Dia. Top","Roll Dia. Bot.","HP"

8664,"ROLLS, PLATE BENDING, INITIAL
PINCH","2009","Cole-Tuve","PRH-10-380",,"New","Yes",,"2009 Cole-Tuve
PRH-10-380
","R5603",$119000.00,"-1",,"120""","1""","14.96""","14.96""","39","Length","Thinkness","Roll
Dia. Top","Roll Dia. Bot.","HP"

8720,"ROLLS, PLATE BENDING, INITIAL
PINCH","2009","Cole-Tuve","4RS-10-380",,"New","No",,"2009 Cole-Tuve
4RS-10-380
","R5603",$143600.00,"-1","Yes","120""","1""","14.96""","14.18""","39","Length","Thinkness","Roll
Dia. Top","Roll Dia. Bot.","HP"

7993,"ROLLS, PLATE BENDING, INITIAL
PINCH","1994","Montgomery","RS8-10",,"Very Good","Yes",,"1994 Montgomery
RS8-10
","R5603",$29500.00,"0","Yes","96""","3/8""","10""","10""","20","Length","Thinkness","Roll
Dia. Top","Roll Dia. Bot.","HP"

8735,"ROLLS, PLATE BENDING, INITIAL PINCH","1956","Webb","6L",,"Very
Good","Yes","6' Roll Length, 1/2"" Mild Steel Cap. 9"" Roll Dia., 10 HP,
Three (3) Rolls Power Driven, Magnetic Brake Motor, Variable Rolling
Speed, Rear Roll Adjust, Manual Pinch Roll Adjust, Drive System Work
Done On Machine Recently, Machine Is Tight and Right","1956 Webb 6L
","R5603",$23500.00,"-1","Yes","72""","1/2""","9""","9""","10","Length","Thinkness","Roll
Dia. Top","Roll Dia. Bot.","HP"

8414,"ROLLS, PLATE BENDING, INITIAL PINCH",,"Webb","6L",,"Good","Yes",,"
Webb 6L
","R5603",$19500.00,"0","Yes","72""","1/2""","9""","9""","10","Length","Thinkness","Roll
Dia. Top","Roll Dia. Bot.","HP"

9692,"ROLLS, PLATE BENDING, PYRAMID
TYPE","2010","Cole-Tuve","3R-UHS-10-400",,"New","No",,"2010 Cole-Tuve
3R-UHS-10-400 ","R5610",$119900.00,"-1","Yes","122""","1
3/8""","15.74""","14.77""","52","Length","Thickness","Roll Dia.
Top","Roll Dia. Bot","HP"

9734,"ROLLS, PLATE BENDING, PYRAMID
TYPE","2010","Cole-Tuve","3R-UHS-10-450",,"New","No",,"2010 Cole-Tuve
3R-UHS-10-450 ","R5610",$155000.00,"-1","Yes","122""","1
3/4""","17.71""","16.53""","65","Length","Thickness","Roll Dia.
Top","Roll Dia. Bot","HP"

9735,"ROLLS, PLATE BENDING, PYRAMID
TYPE","2010","Cole-Tuve","3R-UHS-10-500",,"New","No",,"2010 Cole-Tuve
3R-UHS-10-500
","R5610",$202000.00,"-1","Yes","122""","2""","19.69""","18.11""","78","Length","Thickness","Roll
Dia. Top","Roll Dia. Bot","HP"

9105,"ROLLS, PLATE BENDING, PYRAMID TYPE","1980","Kumla","PV7H",,"Very
Good","Yes",,"1980 Kumla PV7H
","R5610",$59500.00,"0","Yes","120""","5/8""","11.5""","11.5""","15","Length","Thickness","Roll
Dia. Top","Roll Dia. Bot","HP"

8657,"ROLLS, PLATE BENDING, PYRAMID TYPE","1982","Roundo","PS
255/10",,"Good","Yes",,"1982 Roundo PS 255/10
","R5610",$52500.00,"0","Yes","120""","1/2""","10.4""","10.4""","10","Length","Thickness","Roll
Dia. Top","Roll Dia. Bot","HP"

9106,"ROLLS, PLATE BENDING, PYRAMID
TYPE","1985","Roundo","PS-360",,"Good","Yes",,"1985 Roundo PS-360
","R5610",$89500.00,"0","Yes","168""","5/8""","14.17""","14.17""","36","Length","Thickness","Roll
Dia. Top","Roll Dia. Bot","HP"

9875,"ROLLS, PLATE BENDING, PYRAMID TYPE","1990","Roundo","PS255",,"Very
Good","Yes",,"1990 Roundo PS255
","R5610",$56500.00,"0","Yes","122""","7/16""","10.04""","10.04""","5","Length","Thickness","Roll
Dia. Top","Roll Dia. Bot","HP"

6729,"ROUTERS, NC and CNC","2003","AXYZ Automation","Model
4010",,"Good","Yes","168"" x 16"" Table, 150"" x 16"" x 18"" Travels,
24,000 RPM, 30 Taper, 10 HP, Fog Buster Dual Wand Mister Lubricator,
Desoutter AFDE430 Electric Drill with Pneumatic Ram, S-Mouse Rapid
Material Surface / Tool Tip Sensor, Toolpath For Windows Interface
Software C/W 2D & 3D Engraving Module, Remote Jog Handle","2003 AXYZ
Automation Model 4010
","R8906",$22000.00,"-1","Yes","1",,,,,"Table","Travels","RPM","Taper","HP"

10382,"ROUTERS, NC and CNC","1997","Skoda",,"Fanuc 16M","Very
Good","Yes",,"1997 Skoda Fanuc
16M","R8906",$175000.00,"-1","Yes","1",,,,,"Table","Travels","RPM","Taper","HP"

8358,"SAWS, BAND,
HORIZONTAL","1988","Amada","H-450H",,"Good","Yes",,"1988 Amada H-450H
","S0653",$6950.00,"0","Yes","16"" x 17.7""","16""","1.5"" x .05"" x 15'
4""","66 - 393","5","Square","Round","Blade","FPM","HP"

9946,"SAWS, BAND, HORIZONTAL","1998","Behringer","HBP-360 / 704
GA",,"Good","Yes",,"1998 Behringer HBP-360 / 704 GA
","S0653",$39500.00,"-1","Yes","27.5"" x 13.4""","14.2"" /
13.4""","1.5"" x .050"" x 17' 9""","75 -
510","7.4","Square","Round","Blade","FPM","HP"

8733,"SAWS, BAND, HORIZONTAL","1997","Behringer","HBP-430A",,"Very
Good","Yes",,"1997 Behringer HBP-430A
","S0653",$29500.00,"0","Yes","16.93"" x 16.93""","16.93""","1.97"" x
.050"" x 228""","55 - 360","10","Square","Round","Blade","FPM","HP"

8837,"SAWS, BAND, HORIZONTAL",,"Behringer","KV-60",,"Good","Yes",,"
Behringer KV-60 ","S0653",$32500.00,"0","Yes","30"" x
20""","20""","2.25"" x .050"" x 289""","55 -
360","7.5","Square","Round","Blade","FPM","HP"

8973,"SAWS, BAND, HORIZONTAL","1997","Behringer","HBP-360 / 704
GA",,"Good","Yes",,"1997 Behringer HBP-360 / 704 GA
","S0653",$60000.00,"0","Yes","27.5"" x 13.4""","14.2"" / 13.4""","1.5""
x .050"" x 17' 9""","75 - 510","7.4","Square","Round","Blade","FPM","HP"

8723,"SAWS, BAND, HORIZONTAL","1990","Daito","GA-600B",,"Very
Good","Yes",,"1990 Daito GA-600B ","S0653",$39500.00,"0","Yes","24"" x
27""","24""","2"" x .05"" x 268""","33 -
396","10","Square","Round","Blade","FPM","HP"

10388,"SAWS, BAND,
HORIZONTAL","1995","Daito","GA260W",,"Good","Yes",,"1995 Daito GA260W
","S0653",$7900.00,"-1","Yes","11 7/8"" x 10 1/4""","10 1/4""","1 1/4""
x .042"" x 138""","66 - 525","5","Square","Round","Blade","FPM","HP"

9641,"SAWS, BAND, HORIZONTAL",,"Dake","LE10A",,"Good","Yes",," Dake
LE10A ","S0653",$9750.00,"0","Yes","7"" x 12""","10""","1"" x .035"" x
145""","27 - 262","3","Square","Round","Blade","FPM","HP"

9323,"SAWS, BAND, HORIZONTAL","1975","Do-All","C-80",,"Good","Yes","9""
x 16"" Capacity, 10 3/4"" Round, 275 FPM, 2 HP, Work Light, Manual Vise,
In-Feed Roller Table","1975 Do-All C-80
","S0653",$4500.00,"-1","Yes","9"" x 16""","10 3/4""","1.25"" x .042"" x
188""","0 - 275","2","Square","Round","Blade","FPM","HP"

9652,"SAWS, BAND, HORIZONTAL","1997","Do-All","C-916 SA",,"Very
Good","Yes","9"" x 16"" Capacity, 10 3/4"" Round, 275 FPM, 2 HP, 45°
Miter, Work Light, Manual Vise, In-Feed Roller Table","1997 Do-All C-916
SA ","S0653",$14000.00,"0","Yes","9"" x 16""","10 3/4""","1"" x .035"" x
172""","105 - 275","2","Square","Round","Blade","FPM","HP"

9172,"SAWS, BAND, HORIZONTAL","2005","HEM","H105 LA-C",,"Very
Good","Yes",,"2005 HEM H105 LA-C ","S0653",$28500.00,"0","Yes","20"" x
16""","16""","1.25"" x .042"" x 188""","120 -
800","7.5","Square","Round","Blade","FPM","HP"

10494,"SAWS, BAND,
HORIZONTAL","2000","HEM","Twister",,"Good","Yes",,"2000 HEM Twister
","S0653",$10500.00,"0","Yes","14"" x 20""","13"" / 8"" / 12""","1 1/4""
x .042"" x 180""","60 - 300","5","Square","Round","Blade","FPM","HP"

9628,"SAWS, BAND,
HORIZONTAL","2000","HEM","Twister",,"Good","Yes",,"2000 HEM Twister
","S0653",$8950.00,"0","Yes","14"" x 20""","13"" / 8"" / 12""","1.25"" x
.042"" x 180""","65 - 300","5","Square","Round","Blade","FPM","HP"

9781,"SAWS, BAND, HORIZONTAL","2007","Hyd-Mech","S-20DS",,"Very
Good","Yes",,"2007 Hyd-Mech S-20DS ","S0653",$10500.00,"0","Yes","13"" x
18""","13"" / 8"" / 12""","1"" x .042"" x 177""","65 -
350","2","Square","Round","Blade","FPM","HP"

9653,"SAWS, BAND, HORIZONTAL","1998","Hyd-Mech","S-20S",,"Very
Good","Yes",,"1998 Hyd-Mech S-20S ","S0653",$14000.00,"0","On Way","13""
x 18""","13"" / 8"" / 12""","1"" x .032"" x 177""","65 -
370","3","Square","Round","Blade","FPM","HP"

10488,"SAWS, BAND,
HORIZONTAL","1979","Kysor-Johnson","HA-16",,"Good","Yes",,"1979
Kysor-Johnson HA-16 ","S0653",$12500.00,"0","Yes","16"" x
16""","16""","1 1/4"" x .042"" x 180""","80 -
297","5","Square","Round","Blade","FPM","HP"

10493,"SAWS, BAND, HORIZONTAL","1995","Marvel","Model 15A",,"Very
Good","Yes",,"1995 Marvel Model 15A ","S0653",$24500.00,"0","Yes","16""
x 16""","16"" x 16""","1 1/4"" x .035"" x 186""","55 -
400","7.5","Square","Round","Blade","FPM","HP"

9764,"SAWS, BAND,
HORIZONTAL","1988","Peerless","HB-915A",,"Good","Yes",,"1988 Peerless
HB-915A ","S0653",$6500.00,"-1","Yes","9"" x 15""","15""","1 1/2"" x
.050"" x 180""","80 - 400","7.5","Square","Round","Blade","FPM","HP"

8345,"SAWS, BAND, HORIZONTAL","1979","Summit","500
SA",,"Fair","Yes",,"1979 Summit 500 SA
","S0653",$12500.00,"0","Yes","20""","12 3/4""","1 1/4""","50 -
450","5","Square","Round","Blade","FPM","HP"

9543,"SAWS, BAND, VERTICAL",,"Dake","VH-24",,"Very Good","Yes",," Dake
VH-24 ","S0690",$39500.00,"0","Yes","1","13""","183"" / 1"" /
.03125""","50 - 4,250","2","Throat","Max. Height","Blade","FPM","HP"

8910,"SAWS, BAND,
VERTICAL","1980","Do-All","TF2020M",,"Fair","Yes",,"1980 Do-All TF2020M
","S0690",$10500.00,"0","Yes","1","20""","192"" / 1.5"" /
.042""","300","10","Throat","Max. Height","Blade","FPM","HP"

8912,"SAWS, BAND,
VERTICAL","1986","Do-All","TF-1421",,"Good","Yes",,"1986 Do-All TF-1421
","S0690",$10500.00,"0","Yes","1","14""","171"" / 1"" /
.035""","275","2","Throat","Max. Height","Blade","FPM","HP"

8899,"SAWS, BAND, VERTICAL","1995","HEM","V-100 LM-2",,"Very
Good","Yes",,"1995 HEM V-100 LM-2
","S0690",$15500.00,"0","Yes","1","18""","14' 3""' / 1 1/4"" /
.042""","400","5","Throat","Max. Height","Blade","FPM","HP"

8903,"SAWS, BAND, VERTICAL","1991","HEM","V-100A",,"Good","Yes",,"1991
HEM V-100A ","S0690",$11900.00,"0","Yes","1","18""","14' 3""' / 1"" /
.042""","300","2","Throat","Max. Height","Blade","FPM","HP"

7756,"SAWS, BAND, VERTICAL","1998","Marvel","Series 8 Mark II",,"Very
Good","Yes",,"1998 Marvel Series 8 Mark II
","S0690",$11500.00,"0","Yes","1","18""","1"" x 14'
6""","450","2","Throat","Max. Height","Blade","FPM","HP"

8902,"SAWS, BAND, VERTICAL","1996","Marvel","Series 8 Mark II",,"Very
Good","Yes",,"1996 Marvel Series 8 Mark II
","S0690",$13500.00,"0","Yes","1","18""","1"" x 14'
6""","450",,"Throat","Max. Height","Blade","FPM","HP"

8909,"SAWS, BAND,
VERTICAL","1992","Peerless","VB1820XL",,"Fair","Yes",,"1992 Peerless
VB1820XL ","S0690",$11500.00,"0","Yes","1","18""","174"" / 1"" /
.035""","400","5","Throat","Max. Height","Blade","FPM","HP"

8911,"SAWS, BAND, VERTICAL",,"Peerless","VB 1820 U",,"Very
Good","Yes",," Peerless VB 1820 U
","S0690",$10500.00,"0","Yes","1","18""","174"" / 1"" /
.035""","400","4","Throat","Max. Height","Blade","FPM","HP"

9146,"SHEARS, HYDRAULIC","1980","Allsteel","20' x 3/4""",,"Very
Good","Yes","20"" Bed, 3/4"" Mild Steel Cap., 1/2"" Stainless Cap., 60
HP, Three (3) 36"" Front Sheet Supports, Fourteen (14) Independent
Hydraulic Holddowns, Finger Guards, T-Slotted Bed","1980 Allsteel 20' x
3/4""
","S4105H",$105000.00,"-1","Yes","20'","3/4""","15""","36","60","Length","Thickness","Throat","SPM","HP"

10424,"SHEARS, MECHANICAL","19??","Niagara","18-6",,"Good","Yes",,"19??
Niagara 18-6
","S4105M",,"0","Yes","6'","3/8""","55","15",,"Length","Thickness","Throat","SPM","HP"

8272,"SMOKE COLLECTORS","2002","Aercology","ETP 2600
DX2",,"Good","No",,"2002 Aercology ETP 2600 DX2
","S8300",,"0","Yes","1",,,,,"CFM","Motor",,,

9774,"TABLES, NC and CNC","2005","Haas","TR-210H",,"Very
Good","No",,"2005 Haas TR-210H
","T0130",$26500.00,"-1","Yes","8.3""","360,000°","0°",,,"Table","Indexing","Tilt",,

10567,"TABLES, NC and CNC","1997","Haas","HRT-210",,"Good","Yes",,"1997
Haas HRT-210
","T0130",$3850.00,"0","Yes","8.26""","360,000°","0°",,,"Table","Indexing","Tilt",,

10462,"TABLES, NC and
CNC","2007","Haas","HRT-310",,"Excellent","Yes","12.2"" Table, A-Frame
Support, Haas Tombstone (6"" x 6"" x 19"")","2007 Haas HRT-310
","T0130",$11500.00,"0","Yes","12.2""","360,000°","0°",,,"Table","Indexing","Tilt",,

10464,"TABLES, NC and CNC","2008","Haas","HA-5C2C",,"Like
New","Yes",,"2008 Haas HA-5C2C
","T0130",$11000.00,"0","Yes","Collet","360,000°","0°",,,"Table","Indexing","Tilt",,

10568,"TABLES, NC and CNC","2004","Haas","HRT-160",,"Very
Good","Yes",,"2004 Haas HRT-160
","T0130",$6500.00,"-1","Yes","6.29""","360,000°","0°",,,"Table","Indexing","Tilt",,

9023,"TABLES, NC and CNC","2001","Haas","TR-110",,"Very
Good","Yes",,"2001 Haas TR-110
","T0130",$16000.00,"-1","Yes","4.33""","360,000°","0°",,,"Table","Indexing","Tilt",,

9947,"TABLES, NC and CNC","1997","Haas","HRT-210",,"Good","No","8.26""
T-Slotted Table, 360,000°, Brushless Style","1997 Haas HRT-210
","T0130",$6000.00,"0","Yes","8.26""","360,000°","0°",,,"Table","Indexing","Tilt",,

10296,"TABLES, NC and CNC","2004","Haas","HA-5C4",,"Very
good","No",,"2004 Haas HA-5C4 ","T0130",$12000.00,"0","On
Way","Collet","360,000°","0°",,,"Table","Indexing","Tilt",,

9418,"TABLES, NC and CNC","2006","Haas","HA-5C",,"Very
Good","Yes",,"2006 Haas HA-5C ","T0130",,"-1","On
Way","Collet","360,000°","0°",,,"Table","Indexing","Tilt",,

5081,"TABLES, NC and
CNC","2003","Kitagawa","TR-320",,"Excellent","Yes","12.60"" Table,
3.93"" Through Hole, 11.1 RPM","2003 Kitagawa TR-320
","T0130",$17000.00,"-1","Yes","12.60""","360,000°","0°",,,"Table","Indexing","Tilt",,

8592,"TABLES, NC and CNC",,"MMK TecNara","MD-300
R",,"Excellent","Yes",," MMK TecNara MD-300 R
","T0130",$15000.00,"0","Yes","12.60""","360,000°","0°",,,"Table","Indexing","Tilt",,

7101,"TABLES, NC and CNC","1968","Ohio","72""",,"Very Good","Yes","Table
Size (T-Slotted) - 72"", 360,000°, Full Brake, Shot Pins at 90°","1968
Ohio 72""
","T0130",$11500.00,"-1","Yes","72""","360,000°","0°",,,"Table","Indexing","Tilt",,

8165,"TABLES, ROTARY",,"Bullard","48"" x 48""",,"Good","Yes",," Bullard
48"" x 48"" ","T0140",$7950.00,"0","Yes","48"" x
48""","1°","Hydraulic","20,000 Lbs",,"Table","Indexing","Type","Weight
Cap.",