Used Machine Tools 24-7
All The CNC and Manual Machine Tools You Need - All Of The Time
Office (352) 799-8398
Fax (352) 799-0315
Click Here to Email Us
Copyright © 2012 Machine Tools 24-7. All Rights Reserved.
Click Here to Bookmark this Site
All Machines Available By Type

Machine Tools 24/7 is your one stop location source for used machinery.

WebMachines
9078 AUTO CHUCKERS, SINGLE SPINDLE 1965 Warner and Swasey 2AB 3380 Good Yes 1965 Warner and Swasey 2AB 3380 A7113 $12500.00 0 Yes 6" Swing Turret Stoke Slide Stroke Max. Length HP
9121 AUTO CHUCKERS, SINGLE SPINDLE Warner and Swasey 2AC M-3200 Fair No Warner and Swasey 2AC M-3200 A7113 0 Yes 19 1/4" 18" 25 Swing Turret Stoke Slide Stroke Max. Length HP
7989 AUTO CHUCKERS, SINGLE SPINDLE Warner and Swasey 2AC M-3920 Very Good Yes Warner and Swasey 2AC M-3920 A7113 $9500.00 0 Yes 19 1/4" 18" 25 Swing Turret Stoke Slide Stroke Max. Length HP
8762 AUTO SCREW MACHINES, MULTI. SPINDLE 1966 Acme-Gridley RB-8 Good Yes 1966 Acme-Gridley RB-8 A8006 $49500.00 0 Yes 2 5/8" 8" 982 40 8 Max. Dia. Length RPM HP Spindles
8916 AUTO SCREW MACHINES, MULTI. SPINDLE Acme-Gridley RB-6 Good Yes Acme-Gridley RB-6 A8006 $14500.00 0 Yes 2 5/8" 11" 1,065 40 6 Max. Dia. Length RPM HP Spindles
8769 AUTO SCREW MACHINES, MULTI. SPINDLE 1967 Conomatic Model CS Good Yes 1967 Conomatic Model CS A8006 $24500.00 0 Yes 3 1/4" 8" 982 40 8 Max. Dia. Length RPM HP Spindles
8197 AUTO SCREW MACHINES, SINGLE SPINDLE 1972 Brown and Sharpe #2 Very Good Yes 1 1/4" Capacity, 3.5" Chucking Length, 3,503 RPM, 7.5 HP, 8 Position Turret, Change Gears, Coolant, Vertical Cross Slide 1972 Brown and Sharpe #2 A8125 $4500.00 -1 Yes 1 Max. Dia. Length RPM Tools HP
9352 AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL 1993 Citizen E-32 Type IV Mitsubishi Meldas 330 HLC Good Yes Max. Dia. 1.26", Max Length 12.6", 130 - 6,000 RPM, 9.8 HP, Sub Spindle, Live Tool Machine, Iemica Boss 542/37 Barfeed, Many Extras 1993 Citizen E-32 Type IV Mitsubishi Meldas 330 HLC A8175MS $38500.00 0 Yes 1.26" 12.6" 6,000 7.5 20 Max. Dia. Length RPM HP Tools
9942 AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL 1999 Citizen L-20 Type VII Cincom System L Good Yes Max. Work Dia., 0.787", Max. Length 7.87", 8,000 RPM, 2 HP, Live Tooling, Sub-Spindle, FMB Barfeed, NOTE: Machine Ran for Two (2) Days Only. (lost contract for job) 1999 Citizen L-20 Type VII Cincom System L A8175MS $79900.00 0 0.787" 8.1" 10,000 2 22 Max. Dia. Length RPM HP Tools
10100 AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL 2000 Hardinge Conquest ST-225 B Fanuc 18iT Very Good Yes 2000 Hardinge Conquest ST-225 B Fanuc 18iT A8175MS $52500.00 0 Yes 1" 9.65" 8,000 7.3 16 Max. Dia. Length RPM HP Tools
9754 AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL 1984 Star VNC-20 Fanuc 3T Yes 1984 Star VNC-20 Fanuc 3T A8175MS -1 On Way 3/4" 6" 7,500 5 18 Max. Dia. Length RPM HP Tools
9789 AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL 2000 Star SV-32J Fanuc 18iT Very Good Yes 2000 Star SV-32J Fanuc 18iT A8175MS $105000.00 0 Yes 1.25" 12.203" 7,000 10 12 Max. Dia. Length RPM HP Tools
10268 AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL 2005 Tsugami BE-19B III Fanuc 32iA Excellent Yes Work Diameter 0.118" - 0.748", 200 - 12,000 RPM, 5 HP Main 2.95 HP Sub, Nice Tooling Package, 6,000 Run Time Hours 2005 Tsugami BE-19B III Fanuc 32iA A8175MS $86500.00 0 Yes 0.118" 6.69" 12,000 5 23 Max. Dia. Length RPM HP Tools
9201 AUTO SCREW MACHINES, SWISS, CNC-SUB SPINDLE 1988 Tsugami NP-11 Fanuc 0T Good Yes 1988 Tsugami NP-11 Fanuc 0T A8175S $14500.00 0 Yes 0.475" 4.724" 12,000 Max. Dia. Length RPM
8636 AUTOMATIC SCREW MACHS., MULT. SPDL., NC and CNC 1997 Mitsubishi M-T42E Fanuc 15TTF Very Good Yes 1997 Mitsubishi M-T42E Fanuc 15TTF A8050 $115000.00 0 Yes 3 1/4" 4.7" 2,800 3" 6 Max. Dia. Length RPM Spindle Bore Spindles
8635 AUTOMATIC SCREW MACHS., MULT. SPDL., NC and CNC 1996 Mitsubishi M-T35E Fanuc 15TTF Very Good Yes 1996 Mitsubishi M-T35E Fanuc 15TTF A8050 $115000.00 0 Yes 3" 4.7" 2,800 3" 6 Max. Dia. Length RPM Spindle Bore Spindles
9070 BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL 2003 Haas Servo Bar 300 Very Good No 2003 Haas Servo Bar 300 B1120 $4950.00 0 Yes 3 1/8" 60" 1 Max. Bar Length Tubes
6416 BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL 2004 Haas Servo Bar 300 Excellent Yes Bar Capacity 1/4" to 3-1/8", Maximum Bar Length 60", Barfeed in Very Good Condition 2004 Haas Servo Bar 300 B1120 $6500.00 -1 Yes 3 1/8" 60" 1 Max. Bar Length Tubes
9806 BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL 2003 Iemca Prodigy 547/21 Excellent No 2003 Iemca Prodigy 547/21 B1120 $8500.00 -1 Yes 1.85039" 6' 1 Max. Bar Length Tubes
8195 BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL 2002 Iemca AS 325 Type 52 Excellent Yes 0.118" to 0.98425" Capacity, 205" Bar Length 2002 Iemca AS 325 Type 52 B1120 $14000.00 -1 Yes 0.98425" 205" 1 Max. Bar Length Tubes
10167 BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL 200? LNS Quick Load Servo S3 Very Good No 200? LNS Quick Load Servo S3 B1120 -1 On Way 4" 63" 1 Max. Bar Length Tubes
9985 BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL 1996 LNS Sprint S2 Good Yes 1996 LNS Sprint S2 B1120 $8200.00 0 Yes 3 1/8" 73" 1 Max. Bar Length Tubes
9338 BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL 1992 LNS Sprint 2 HydroBar Good Yes 1/2" to 3 1/8" Capacity, 12' Bar Length, Bar Storage Rack, Auto Load, PLC Interface, Extra Push Rods, Bar Blocks, Complete Hydraulics 1992 LNS Sprint 2 HydroBar B1120 $6800.00 0 Yes 3 1/8" 12' 1 Max. Bar Length Tubes
8310 BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL 2001 LNS Quick Load Servo S2 Like New 2001 LNS Quick Load Servo S2 B1120 $12500.00 -1 Yes 2 1/2" 55" 1 Max. Bar Length Tubes
9491 BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL 1992 LNS Sprint 2 HydroBar Good No 1/2" to 3 1/8" Capacity, 12' Bar Length, Bar Storage Rack, Auto Load, PLC Interface, Extra Push Rods, Bar Blocks, Complete Hydraulics 1992 LNS Sprint 2 HydroBar B1120 $7500.00 -1 Yes 3 1/8" 12' 1 Max. Bar Length Tubes
6939 BENDERS, PIPE and TUBE 1999 Addison DB-120 Very Good Yes 1999 Addison DB-120 B1804 $149500.00 0 No 4 1/2" 40" 157.6" 40 Capacity Max. Radius Max. Length HP
8145 BORING MILLS, HORIZ, FLOOR TYPE CNC and NC 1980/2000 Lucas 6" Delta Dynapath 50 Good Yes 1980/2000 Lucas 6" Delta Dynapath 50 B5420 $189500.00 0 Yes 6" 50 1,152 40 Spindle Taper RPM HP Table
8082 BORING MILLS, HORIZ, FLOOR TYPE CNC and NC 1981/2004 Mitsubishi MAF-150RS Fanuc 16M Good No 1981/2004 Mitsubishi MAF-150RS Fanuc 16M B5420 $410000.00 0 Yes 5.9" 50 1,450 40 62.99" x 62.99" Spindle Taper RPM HP Table
10089 BORING MILLS, HORIZ, FLOOR TYPE CNC and NC 1964/2007 Scharmann WF-132 Heidenhain TNC-320 Excellent Yes 1964/2007 Scharmann WF-132 Heidenhain TNC-320 B5420 $265000.00 -1 Yes 5 1/4" 50 1,000 60 300" x 96" Spindle Taper RPM HP Table
7677 BORING MILLS, HORIZ, FLOOR TYPE CNC W-ATC 1981 Giddings and Lewis G-50-TX Giddings & Lewis 800B Good Yes 5" Spindle, 50 Taper, 1,400 RPM, 30 HP, 96" x 72" 36" x 56" Travels, Two (2) 48" x 72" Pallet Shuttle Tables, Full Forth Rotary Table, 100 ATC, Steel Way Covers, Chip Conveyor 1981 Giddings and Lewis G-50-TX Giddings & Lewis 800B B5420A $225000.00 -1 Yes 5" 50 1,400 30 48" x 72" Spindle Taper RPM HP Table
7393 BORING MILLS, HORIZ, FLOOR TYPE CNC W-ATC 1981 Mitsubishi MQF-150 Allen Bradley 7320 Neds Repair No 5.905" Spindle, 50 Taper, 2,000 RPM, 50 HP, 137.79" x 86.61" x 13.77" x 27.55" Travels, 42" x 140" Table, Hydrostatic Bearings All Axes, Full Three Axis NC Control, Chip Conveyor 1981 Mitsubishi MQF-150 Allen Bradley 7320 B5420A $95000.00 -1 Yes 5.905" 50 2,000 50 42" x 140" Spindle Taper RPM HP Table
9286 BORING MILLS, HORIZ, TABLE TYPE 1964 Bullard Model 75 Very Good Yes 1964 Bullard Model 75 B5500 $26500.00 0 Yes 5" 50 1,800 50 84" x 48" Spindle Taper RPM HP Table
9883 BORING MILLS, HORIZ, TABLE TYPE 1986/2010 Cincinnati-Gilbert Model D Re-Built To New Yes 1986/2010 Cincinnati-Gilbert Model D B5500 $149000.00 0 Yes 6" 50 1,130 40 60" x 120" Spindle Taper RPM HP Table
8337 BORING MILLS, HORIZ, TABLE TYPE Giddings and Lewis 300-T Very Good Yes Giddings and Lewis 300-T B5500 $36500.00 0 Yes 3" 5 MT 1,600 10 72" x 36" Spindle Taper RPM HP Table
9886 BORING MILLS, HORIZ, TABLE TYPE 1978 Giddings and Lewis H-5-T Very Good Yes 1978 Giddings and Lewis H-5-T B5500 $139500.00 0 Yes 5" 50 1,020 40 48" x 122" Spindle Taper RPM HP Table
9136 BORING MILLS, HORIZ, TABLE TYPE 1975 Giddings and Lewis 70A-G5-T Very Good Yes 1975 Giddings and Lewis 70A-G5-T B5500 $64500.00 0 Yes 5" 50 975 40 96" x 48" Spindle Taper RPM HP Table
9660 BORING MILLS, HORIZ, TABLE TYPE 1967 Giddings and Lewis 70-D4-7 Good Yes 1967 Giddings and Lewis 70-D4-7 B5500 $34500.00 0 Yes 4" 50 1,300 20 78" x 48" Spindle Taper RPM HP Table
6636 BORING MILLS, HORIZ, TABLE TYPE 1967 Giddings and Lewis 330-T Good Yes 1967 Giddings and Lewis 330-T B5500 $15000.00 -1 Yes 3" 5 500 10 62" x 30" Spindle Taper RPM HP Table
9444 BORING MILLS, HORIZ, TABLE TYPE 1974 Giddings and Lewis 75-H6-T Good Yes 1974 Giddings and Lewis 75-H6-T B5500 $99500.00 0 Yes 6" 50 1,020 40 120" x 60" Spindle Taper RPM HP Table
7751 BORING MILLS, HORIZ, TABLE TYPE Giddings and Lewis 560T Good Yes Giddings and Lewis 560T B5500 $50000.00 0 Yes 5" 7 MT 1,500 40 164" x 72" Spindle Taper RPM HP Table
6635 BORING MILLS, HORIZ, TABLE TYPE 1952 Giddings and Lewis 350-T Good No 5" Spindle, # 6 Morse, 375 RPM, 15 HP, 60" x 120 Table, 108" x 60" x 36" x 96" Travels, Three (3) Axis DRO's, Outrigger Support 1952 Giddings and Lewis 350-T B5500 $25000.00 -1 Yes 5" 6 MT 375 15 60" x 120" Spindle Taper RPM HP Table
8234 BORING MILLS, HORIZ, TABLE TYPE 1965 Giddings and Lewis 65-H-6T Good Yes 1965 Giddings and Lewis 65-H-6T B5500 $148000.00 0 Yes 6" 50 1,020 30 60" x 144" Spindle Taper RPM HP Table
8231 BORING MILLS, HORIZ, TABLE TYPE 1969 Giddings and Lewis DA5-T5 Good Yes 1969 Giddings and Lewis DA5-T5 B5500 $59500.00 0 Yes 5" 6 MT 1,000 15 98" x 48" Spindle Taper RPM HP Table
8227 BORING MILLS, HORIZ, TABLE TYPE Giddings and Lewis 570-T Good Yes Giddings and Lewis 570-T B5500 $26000.00 0 Yes 7" 7 MT 300 140" x 60" Spindle Taper RPM HP Table
6637 BORING MILLS, HORIZ, TABLE TYPE 1948 Giddings and Lewis 330 Good Yes 1948 Giddings and Lewis 330 B5500 $15000.00 -1 Yes 3" 5 500 10 62" x 30" Spindle Taper RPM HP Table
7600 BORING MILLS, HORIZ, TABLE TYPE 1962 Giddings and Lewis 340-T Good Yes 1962 Giddings and Lewis 340-T B5500 $59500.00 0 No 4" 5 MT 600 25 48" x 98" Spindle Taper RPM HP Table
8235 BORING MILLS, HORIZ, TABLE TYPE 1994 Giddings and Lewis 70A-DP5-T Very Good 1994 Giddings and Lewis 70A-DP5-T B5500 $139500.00 0 5" 50 975 25 60" x 144" Spindle Taper RPM HP Table
9443 BORING MILLS, HORIZ, TABLE TYPE 1967 Lucas 542B-120 Very Good Yes 1967 Lucas 542B-120 B5500 $114500.00 0 Yes 5" 50 1,200 25 48" x 122" Spindle Taper RPM HP Table
9922 BORING MILLS, HORIZ, TABLE TYPE 19?? Lucas 441B72 Very Good Yes 19?? Lucas 441B72 B5500 -1 Yes 4" 50 1,550 15 74" x 42" Spindle Taper RPM HP Table
10496 BORING MILLS, HORIZ, TABLE TYPE Lucas Model 30DC Very Good Yes Lucas Model 30DC B5500 $89500.00 0 Yes 5" 50 1,200 30 60" x 122" Spindle Taper RPM HP Table
9656 BORING MILLS, HORIZ, TABLE TYPE 1969 Lucas 441B72 Good Yes 1969 Lucas 441B72 B5500 $39500.00 0 Yes 4" 50 1,550 15 74" x 42" Spindle Taper RPM HP Table
9658 BORING MILLS, HORIZ, TABLE TYPE 1978 Nomura B-100LP Good Yes 2804 1981 - Nomura - B-100LP - 1978 Nomura B-100LP B5500 $29500.00 0 Yes 3.94" 50 1,200 15 55" x 40" Spindle Taper RPM HP Table
8933 BORING MILLS, HORIZ, TABLE TYPE 1967 PBR AF-90 Very Good Yes 3 1/2" Spindle, BT 45 Taper, 1,500 RPM, 15 HP, 58" x 48" x 22" x 60" Travels, 47" x 37" Rotary Table, Tailstock, 11" Spindle Support, Accurite III 2-Axis DRO, Coolant System, Pendant Control, Quick Change Spindle, Outer Bearing Column, Power Draw Bar, Facing Head Available 1967 PBR AF-90 B5500 -1 Yes 3 1/2" 45 1,500 15 47" x 37" Spindle Taper RPM HP Table
10395 BORING MILLS, HORIZ, TABLE TYPE 19?? Scharmann FB-100 Very Good Yes 19?? Scharmann FB-100 B5500 -1 Yes 4 3/4" 50 900 20 79" x 60" Spindle Taper RPM HP Table
9477 BORING MILLS, HORIZ, TABLE TYPE Scharmann FB-132 Good Yes Scharmann FB-132 B5500 $39500.00 0 Yes 4 3/4" 50 900 20 79" x 60" Spindle Taper RPM HP Table
9440 BORING MILLS, HORIZ, TABLE TYPE 1972 Scharmann FB-100 Good Yes 1972 Scharmann FB-100 B5500 $34500.00 0 Yes 4 3/4" 50 1,000 20 51 1/2" x 37 1/2" Spindle Taper RPM HP Table
8236 BORING MILLS, HORIZ, TABLE TYPE 1963 Skoda W-160A Good Yes 1963 Skoda W-160A B5500 $149500.00 0 Yes 6.29" 100 Metric 800 47.5 108.26" x 78.74" Spindle Taper RPM HP Table
10535 BORING MILLS, HORIZ, TABLE TYPE 1996 Summit 4 1/8" Very Good Yes 1996 Summit 4 1/8" B5500 $89500.00 0 Yes 4 1/8" 50 1,400 18 60" x 48" Spindle Taper RPM HP Table
10518 BORING MILLS, HORIZ, TABLE TYPE 1994 Summit HTM-4 Yes 1994 Summit HTM-4 B5500 0 Yes 4 1/8" 50 1,600 18 63" x 55" Spindle Taper RPM HP Table
8576 BORING MILLS, HORIZ, TABLE TYPE 1977 Tos W-100A Good Yes 1977 Tos W-100A B5500 $35000.00 0 Yes 3.94" 50 1,120 20 55" x 55" Spindle Taper RPM HP Table
9889 BORING MILLS, HORIZ, TABLE TYPE 1981 Tos WHN-138A Good Yes 1981 Tos WHN-138A B5500 $79500.00 0 Yes 5.12" 50 710 40 78" x 71" Spindle Taper RPM HP Table
9882 BORING MILLS, HORIZ, TABLE TYPE 1981 Tos WHN-138A Very Good Yes 1981 Tos WHN-138A B5500 $132500.00 0 Yes 5.12" 50 800 50 70.86" x 62.99" Spindle Taper RPM HP Table
9688 BORING MILLS, HORIZ, TABLE TYPE 1980 Toshiba (Shibaura) BT-10BR3 Very Good Yes 1980 Toshiba (Shibaura) BT-10BR3 B5500 $63900.00 0 Yes 3.94" 50 1,000 15 63" x 55" Spindle Taper RPM HP Table
9657 BORING MILLS, HORIZ, TABLE TYPE 1981 Toshiba (Shibaura) BT-10B Good Yes 1981 Toshiba (Shibaura) BT-10B B5500 $39500.00 0 Yes 3.94" 50 1,000 15 49.2" x 44.1" Spindle Taper RPM HP Table
9661 BORING MILLS, HORIZ, TABLE TYPE 1978 Union BFT-110 Good Yes Spindle 4.33", 50 Taper, 63" X 52" Indexing Table, 5.6 - 1,120 RPM, 20 HP, Power Draw Bar, Pendant Control, 3-Axis DRO's, Hardend & Ground Ways, Power Draw Bar, Way Covers, Tailstock 1978 Union BFT-110 B5500 $42500.00 0 Yes 4.33" 50 1,120 20 60" x 52" Spindle Taper RPM HP Table
9693 BORING MILLS, HORIZ, TABLE TYPE 1978 Union BFT-110/II Good Yes 1978 Union BFT-110/II B5500 $29500.00 0 Yes 4.33" 50 1,120 20 60" x 52" Spindle Taper RPM HP Table
9399 BORING MILLS, HORIZ, TABLE TYPE 1974 Wotan B-130-R Good Yes 1974 Wotan B-130-R B5500 $79500.00 0 Yes 5.11" 50 1,000 25 82" x 72" Spindle Taper RPM HP Table
9400 BORING MILLS, HORIZ, TABLE TYPE 1973 Wotan B-105-M Good Yes 1973 Wotan B-105-M B5500 $45900.00 0 Yes 5.11" 50 1,600 25 55" x 44" Spindle Taper RPM HP Table
9690 BORING MILLS, HORIZ, TABLE TYPE 1972 Wotan B-100-M Very Good Yes 1972 Wotan B-100-M B5500 $54500.00 0 Yes 4" 50 1,000 20 44" x 55" Spindle Taper RPM HP Table
8547 BORING MILLS, HORIZ, TABLE TYPE 1975 Wotan B-130-S Good Yes 1975 Wotan B-130-S B5500 $58000.00 0 Yes 5.11" 50 1,000 15 66.9" x 59.8" Spindle Taper RPM HP Table
8427 BORING MILLS, HORIZ, TABLE TYPE 1965 Wotan B-130 Good Yes 1965 Wotan B-130 B5500 $39500.00 0 Yes 5.11 50 1,000 15 66.9" x 59.8" Spindle Taper RPM HP Table
10521 BORING MILLS, HORIZ, TABLE TYPE 1984 Wotan B-150-S Good Yes 1984 Wotan B-150-S B5500 $94000.00 0 Yes 5.9" 50 1,000 15 79" x 71" Spindle Taper RPM HP Table
10520 BORING MILLS, HORIZ, TABLE TYPE 1984 Wotan B-130-S Good Yes 1984 Wotan B-130-S B5500 $72000.00 0 Yes 5.11" 50 1,000 15 66.9" x 59.8" Spindle Taper RPM HP Table
10140 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1961/1984 DeVlieg JMC-4360 Centroid M 400 Good Yes 4" Spindle, 30 HP, 3,000 RPM, 50 Taper, 60" x 48" x 16" x 14" Travels, 48" x 60" Table, Centroid M 400, Remote Jog Handle, Steel Way Covers, Coolant Chiller, Probe System, Tapered and Straight Thread Milling, Coordinate System Rotation 1961/1984 DeVlieg JMC-4360 Centroid M 400 B5751 $24500.00 -1 Yes 4" 50 3,000 30 48" x 60" Spindle Taper RPM HP Table
9928 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 2009 Fermat (TOS) WHN-13.8 Heidenhain i530 New No 2009 Fermat (TOS) WHN-13.8 Heidenhain i530 B5751 $522000.00 0 Yes 5.11" 50 1,800 49 87" x 71" Spindle Taper RPM HP Table
7473 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1980 Giddings and Lewis PC50-TX G&L 800 Good Yes 1980 Giddings and Lewis PC50-TX G&L 800 B5751 $139900.00 0 Yes 5" 50 1,120 30 96" x 48" Spindle Taper RPM HP Table
8232 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1970/96 Giddings and Lewis 70-H5-T Heidenhain TNC-406 Good Yes 1970/96 Giddings and Lewis 70-H5-T Heidenhain TNC-406 B5751 $189500.00 0 Yes 5" 50 1,000 40 72" x 144" Spindle Taper RPM HP Table
8338 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1954/89 Giddings and Lewis 350-T Allen Bradley 8400 Good Yes 1954/89 Giddings and Lewis 350-T Allen Bradley 8400 B5751 $46000.00 0 Yes 5" 6 MT 975 15 60" x 120" Spindle Taper RPM HP Table
10396 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1994 Kuraki KBM-11A Fanuc 16M Excellent Yes 1994 Kuraki KBM-11A Fanuc 16M B5751 $179500.00 -1 Yes 4.33" 50 1,500 25 41"x 37" Spindle Taper RPM HP Table
8652 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1983 Kuraki KBT-1105 Fanuc 6M Good Yes 1983 Kuraki KBT-1105 Fanuc 6M B5751 $120000.00 0 Yes 4.33" 50 1,200 20 55.18" x 62.99" Spindle Taper RPM HP Table
7622 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1994 Kuraki KBT-11 Fanuc 16M Very Good Yes 1994 Kuraki KBT-11 Fanuc 16M B5751 $199500.00 0 Yes 4.33" 50 1,500 25 37" x 41" Spindle Taper RPM HP Table
7482 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1987 Lucas 30D CS GE Mark Centruy 2000 Needs Retrofitting Yes 1987 Lucas 30D CS GE Mark Centruy 2000 B5751 $60000.00 0 Yes 5" 50 1,200 30 60" x 100" Spindle Taper RPM HP Table
10519 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1999 Stanko 2B622 Fanuc 16MB Very Good Yes 1999 Stanko 2B622 Fanuc 16MB B5751 $129500.00 0 Yes 5" 50 2,500 50 62.9" x 49.21 Spindle Taper RPM HP Table
8248 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1999 Toshiba BP-110-P20 Tosnuc 888 Very Good Yes 1999 Toshiba BP-110-P20 Tosnuc 888 B5751 $269500.00 0 Yes 4.33" 50 3,000 30 55" x 80" Spindle Taper RPM HP Table
8320 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1982/05 Toshiba BP-13P5 Fanuc 16MB Very Good Yes 1982/05 Toshiba BP-13P5 Fanuc 16MB B5751 $165000.00 0 Yes 5.19" 7 MT 1,000 30 59" x 118" Spindle Taper RPM HP Table
9398 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1989 Union BFT-105 Heidenhain TNC-355 Good Yes 1989 Union BFT-105 Heidenhain TNC-355 B5751 $129500.00 0 Yes 4" 50 2,500 34 54" x 48" Spindle Taper RPM HP Table
10561 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1995 Union BFT-13/6 Fanuc 16iM Very Good Yes 1995 Union BFT-13/6 Fanuc 16iM B5751 $89500.00 0 Yes 5" 50 930 50 55.11" x 62.99" Spindle Taper RPM HP Table
9919 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 19?? Burgmaster HTC-330 L GE 550 Good Yes 19?? Burgmaster HTC-330 L GE 550 B5751A -1 Yes 5" 50 1,200 20 36" x 60" Spindle Taper RPM HP Table
9921 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 19?? Cincinnati 10 HC-1500 Acramatic 2.1 Big Blue Good 19?? Cincinnati 10 HC-1500 Acramatic 2.1 Big Blue B5751A -1 Yes 5.11" 50 4,000 60 31.25" x 64" Spindle Taper RPM HP Table
9920 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 19?? Cincinnati 10 HC-1500 Acramatic 2.1 Big Blue Good Yes 19?? Cincinnati 10 HC-1500 Acramatic 2.1 Big Blue B5751A -1 Yes 5.11" 50 4,000 60 31.25" x 64" Spindle Taper RPM HP Table
10437 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 1999 Daewoo Ace B-130 Fanuc 16M Very Good Yes 1999 Daewoo Ace B-130 Fanuc 16M B5751A $285000.00 0 Yes 5" 50 2,000 30 71" x 63" Spindle Taper RPM HP Table
9642 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 1997 Defum DBM-100N Fanuc OMC Good Yes 1997 Defum DBM-100N Fanuc OMC B5751A $99500.00 0 Yes 4" 50 2,000 40 55" x 43" Spindle Taper RPM HP Table
10359 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 2005 Doosan DB-130C Fanuc 18iMB Very Good Yes 2005 Doosan DB-130C Fanuc 18iMB B5751A $412000.00 0 Yes 5.13" 50 2,500 35 62.99" x 70.86" Spindle Taper RPM HP Table
10258 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 2008 Femco BMC-110 R2 Fanuc 21iMB Excellent Yes 2008 Femco BMC-110 R2 Fanuc 21iMB B5751A $320000.00 0 Yes 4.33" 50 2,500 35 62.99" x 56.69" Spindle Taper RPM HP Table
10067 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 2009 Femco BMC-110 R2 Fanuc 21i Like New Yes 2009 Femco BMC-110 R2 Fanuc 21i B5751A $299000.00 0 Yes 4.33" 50 2,500 35 62.99" x 56.69" Spindle Taper RPM HP Table
10361 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 1996 Kuraki KBT-13DXA Fanuc 15M Very Good Yes 1996 Kuraki KBT-13DXA Fanuc 15M B5751A $525000.00 0 Yes 5.125" 50 2,500 35 62.99" x 70.87" Spindle Taper RPM HP Table
10372 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 1994 Kuraki KBM-11A Fanuc 16M Very Good Yes 1994 Kuraki KBM-11A Fanuc 16M B5751A $175000.00 0 Yes 4.33" 50 1,500 25 41.25" x 37.25" Spindle Taper RPM HP Table
10081 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 1988 Kuraki KH-63 Fanuc 11M Good Yes 1988 Kuraki KH-63 Fanuc 11M B5751A $35000.00 0 Yes 3.94" 50 1,200 15 24" x 24" Spindle Taper RPM HP Table
6957 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 1997 Mitsubishi MHT 11/1416 Mitsubishi 520M Very Good Yes 1997 Mitsubishi MHT 11/1416 Mitsubishi 520M B5751A $325000.00 0 Yes 4.33" 50 2,500 30 63" x 51" Spindle Taper RPM HP Table
10069 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 2009 Poreba HBM-4 Fanuc 18iMB New Yes 2009 Poreba HBM-4 Fanuc 18iMB B5751A $264500.00 0 Yes 4.33" 50 3,500 25 60" x 48" Spindle Taper RPM HP Table
10563 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 2000 Toshiba BTD-13.R22 Tosnuc 888 Very Good Yes 2000 Toshiba BTD-13.R22 Tosnuc 888 B5751A $469500.00 0 Yes 5.12 50 2,500 40 70.8" x 86.66" Spindle Taper RPM HP Table
8662 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 2000 Toshiba BP-130-P40 Tosnuc 888 Very Good Yes 2000 Toshiba BP-130-P40 Tosnuc 888 B5751A $459900.00 0 Yes 5.12" 50 2,500 40 70" x 155" Spindle Taper RPM HP Table
10586 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 2002 Union KC-130 Heidenhain TNC-426 Very Good Yes 2002 Union KC-130 Heidenhain TNC-426 B5751A $715000.00 0 Yes 5.11 50 6,000 60 100" x 80" Spindle Taper RPM HP Table
7569 BORING MILLS, VERTICAL and VTL 1956 Bertram 60" Good Yes 1956 Bertram 60" B6006 $59500.00 0 Yes 60" 64" 48" 75 30 Table Swing U/R RPM HP
10625 BORING MILLS, VERTICAL and VTL 1950's Betts 144" Good Yes 1950's Betts 144" B6006 $155900.00 0 Yes 144" 150.78" 108" 20 75 Table Swing U/R RPM HP
8063 BORING MILLS, VERTICAL and VTL Betts 112" Good Yes Betts 112" B6006 $119500.00 0 Yes 112" 116" 54" 100 50 Table Swing U/R RPM HP
8392 BORING MILLS, VERTICAL and VTL 1976 Bullard 86" Dynatrol Very Good Yes 1976 Bullard 86" Dynatrol B6006 $499500.00 0 Yes 86" 98" 132" 120 75 Table Swing U/R RPM HP
8413 BORING MILLS, VERTICAL and VTL Bullard 36" Spiral Drive Godd Yes Bullard 36" Spiral Drive B6006 -1 Yes 36" 39" 24" 140 25 Table Swing U/R RPM HP
8420 BORING MILLS, VERTICAL and VTL Bullard 36" Spiral Drive Good Yes Bullard 36" Spiral Drive B6006 $12500.00 0 Yes 36" 39" 24" 140 25 Table Swing U/R RPM HP
8479 BORING MILLS, VERTICAL and VTL 1942 Bullard 36" Spiral Drive Very Good Yes 1942 Bullard 36" Spiral Drive B6006 $15500.00 0 Yes 36" 39" 24" 200 25 Table Swing U/R RPM HP
8564 BORING MILLS, VERTICAL and VTL Bullard 42" Spiral Drive Good Yes Bullard 42" Spiral Drive B6006 $26500.00 0 Yes 42" 54" 57" 100 25 Table Swing U/R RPM HP
8687 BORING MILLS, VERTICAL and VTL 1952 Bullard 54" Cutmaster Good Yes 1952 Bullard 54" Cutmaster B6006 $49500.00 0 Yes 54" 62" 44" 120 30 Table Swing U/R RPM HP
9761 BORING MILLS, VERTICAL and VTL Bullard 42" Spiral Drive Good Yes Bullard 42" Spiral Drive B6006 $18500.00 0 Yes 42" 54" 57" 100 25 Table Swing U/R RPM HP
9156 BORING MILLS, VERTICAL and VTL 1952 Bullard 36" Man-Au-Trol Fair No 1952 Bullard 36" Man-Au-Trol B6006 $15000.00 0 Yes 36" 46" 50" 300 30 Table Swing U/R RPM HP
10191 BORING MILLS, VERTICAL and VTL 1954 Bullard 42" Cutmaster Very Good Yes 1954 Bullard 42" Cutmaster B6006 $26500.00 0 Yes 42" 48" 37" 200 20 Table Swing U/R RPM HP
9726 BORING MILLS, VERTICAL and VTL 1954 Bullard 36" Cutmaster Good Yes 1954 Bullard 36" Cutmaster B6006 $42500.00 0 Yes 36" 45" 30" 180 25 Table Swing U/R RPM HP
10235 BORING MILLS, VERTICAL and VTL 1962 Bullard 56" Dynatrol Good Yes 1962 Bullard 56" Dynatrol B6006 $59500.00 0 Yes 56" 62" 40" 200 50 Table Swing U/R RPM HP
8124 BORING MILLS, VERTICAL and VTL 1958 Bullard 36" Cutmaster Very Good Yes 1958 Bullard 36" Cutmaster B6006 $42000.00 0 Yes 36" 45" 30" 180 30 Table Swing U/R RPM HP
9773 BORING MILLS, VERTICAL and VTL 1952 Bullard 42" Cutmaster Good Yes 1952 Bullard 42" Cutmaster B6006 $34500.00 0 Yes 42" 54" 37" 150 30 Table Swing U/R RPM HP
10190 BORING MILLS, VERTICAL and VTL 1966 Bullard 46" Dynatrol Good Yes 1966 Bullard 46" Dynatrol B6006 $49500.00 0 Yes 46" 58" 54" 250 50 Table Swing U/R RPM HP
10195 BORING MILLS, VERTICAL and VTL 1953 Bullard 42" Cutmaster Good Yes 1953 Bullard 42" Cutmaster B6006 $79500.00 0 Yes 42" 54" 37" 200 30 Table Swing U/R RPM HP
10222 BORING MILLS, VERTICAL and VTL 1953 Bullard 42" Cutmaster Good Yes 1953 Bullard 42" Cutmaster B6006 $32500.00 0 Yes 42" 54" 37" 200 50 Table Swing U/R RPM HP
9723 BORING MILLS, VERTICAL and VTL 1943 Bullard 36" Cutmaster Good Yes 1943 Bullard 36" Cutmaster B6006 $29900.00 0 Yes 36" 45" 30" 180 30 Table Swing U/R RPM HP
8067 BORING MILLS, VERTICAL and VTL 1946 Bullard 42" Spiral Drive Good Yes 42" 4-Jaw Chuck, 45" Swing - Side Up, 54" Swing Side Down, 37" Under Rail, 120 RPM, 30 HP, One (1) Five Sided Turret Head, One (1) Side Head 1946 Bullard 42" Spiral Drive B6006 $17500.00 0 Yes 42" 54" 33" 120 30 Table Swing U/R RPM HP
6223 BORING MILLS, VERTICAL and VTL 1954 Bullard 42" Cutmaster Good No 1954 Bullard 42" Cutmaster B6006 $59500.00 -1 Yes 42" 54" 37" 150 30 Table Swing U/R RPM HP
5869 BORING MILLS, VERTICAL and VTL 1973 Bullard 46" Dynatrol Very Good Yes 1973 Bullard 46" Dynatrol B6006 $105900.00 0 Yes 46" 58" 64" 333 50 Table Swing U/R RPM HP
6549 BORING MILLS, VERTICAL and VTL 1967 Bullard 36" Dynatrol Very Good Yes 1967 Bullard 36" Dynatrol B6006 $59500.00 0 Yes 36" 48" 54" 585 50 Table Swing U/R RPM HP
5860 BORING MILLS, VERTICAL and VTL 1967 Bullard 52" Dynatrol Good Yes 1967 Bullard 52" Dynatrol B6006 $59500.00 0 Yes 52" 58" 50 3/8" 250 50 Table Swing U/R RPM HP
7889 BORING MILLS, VERTICAL and VTL 1964 Bullard 36" Dynatrol Good Yes 36" 3-Jaw Chuck, 48" Swing, 30" Under Rail, 3008 RPM, 50 HP, 4-Pos. Turret Head, Power Rapid Traverse All Directions, Full Pendant Control, Hardened and Ground Ways 1964 Bullard 36" Dynatrol B6006 $19000.00 -1 Yes 36" 48" 30" 300 50 Table Swing U/R RPM HP
8064 BORING MILLS, VERTICAL and VTL 1942 Bullard 36" Spiral Drive Good Yes 1942 Bullard 36" Spiral Drive B6006 $14500.00 0 Yes 34" 39" 24" 200 30 Table Swing U/R RPM HP
8066 BORING MILLS, VERTICAL and VTL Bullard 36" Spiral Drive Good Yes Bullard 36" Spiral Drive B6006 $10500.00 0 Yes 34" 39" 24" 200 30 Table Swing U/R RPM HP
8103 BORING MILLS, VERTICAL and VTL 1962 Bullard 64" Cutmaster Good Yes 1962 Bullard 64" Cutmaster B6006 $95000.00 0 Yes 64" 72" 54" 100 50 Table Swing U/R RPM HP
9574 BORING MILLS, VERTICAL and VTL Cincinnati 84" Hypro Good 84" 4-Jaw Chuck, 89" Swing, 70" Under Rail, 70 RPM, 30 HP, Two (2) Swivel Type Ram Heads, Pendant Controls, Table Guarding, Power Rail Elevation, Anti-Friction Table Track, Coolant System, Floor Standing - No Pit Required Cincinnati 84" Hypro B6006 $79500.00 0 Yes 84" 89" 70" 70 30 Table Swing U/R RPM HP
8388 BORING MILLS, VERTICAL and VTL Cincinnati 92" Hypro Good No 92" 4-Jaw Chuck, 102" Swing, 64" Under Rail, 43 RPM, 40 HP, Two (2) Ram Head(s), One (1) Side Head, Pendant Controls, No Pit Required Cincinnati 92" Hypro B6006 $79500.00 0 Yes 92" 102" 64" 43 40 Table Swing U/R RPM HP
8443 BORING MILLS, VERTICAL and VTL 1977 Dorries 40" Very Good Yes 1977 Dorries 40" B6006 $34500.00 0 Yes 39.4" 51" 60" 355 30 Table Swing U/R RPM HP
8200 BORING MILLS, VERTICAL and VTL 1970 Froriep 6KE 260/610-120 Very Good No 1970 Froriep 6KE 260/610-120 B6006 $299500.00 0 Yes 102" 240" 53 38 75 Table Swing U/R RPM HP
9826 BORING MILLS, VERTICAL and VTL 1947 Giddings and Lewis 52" Hypro Good Yes 1947 Giddings and Lewis 52" Hypro B6006 $52500.00 0 Yes 52" 57" 46" 72 40 Table Swing U/R RPM HP
8114 BORING MILLS, VERTICAL and VTL 1954 Giddings and Lewis Model 61 Very Good Yes 1954 Giddings and Lewis Model 61 B6006 $125000.00 0 Yes 52" 54" 52" 300 30 Table Swing U/R RPM HP
9514 BORING MILLS, VERTICAL and VTL 1955 Giddings and Lewis 72" Hypro Good No 1955 Giddings and Lewis 72" Hypro B6006 $229500.00 0 Yes 72" 75 120 100 40 Table Swing U/R RPM HP
8198 BORING MILLS, VERTICAL and VTL 1955 King 42" Good Yes 1955 King 42" B6006 $40000.00 0 Yes 42" 54" 37" 200 30 Table Swing U/R RPM HP
8575 BORING MILLS, VERTICAL and VTL King 64" Good Yes King 64" B6006 $45000.00 0 Yes 64" 72" 57" 45. 50 Table Swing U/R RPM HP
8418 BORING MILLS, VERTICAL and VTL King 84" Good Yes King 84" B6006 $65000.00 0 Yes 84" 90" 70" 30 4 Table Swing U/R RPM HP
8106 BORING MILLS, VERTICAL and VTL 1950 King V-7 - 100" Fair Yes 1950 King V-7 - 100" B6006 $99900.00 0 Yes 100" 103" 82" 45.1 40 Table Swing U/R RPM HP
8285 BORING MILLS, VERTICAL and VTL 1948 King 62" Good Yes 62" Table, 72" Swing, 62" Under Rail, 103 RPM, 50 HP, Two Ram Head(s), One Side Head, 66" 4-Jaw Manual Chuck, Pendant Control 1948 King 62" B6006 $45000.00 -1 Yes 62" 72" 62" 103" 50 Table Swing U/R RPM HP
10090 BORING MILLS, VERTICAL and VTL King 62" Good Yes King 62" B6006 $38000.00 0 Yes 62" 72" 53 1/2" 44 40 Table Swing U/R RPM HP
8391 BORING MILLS, VERTICAL and VTL King 96" Very Good King 96" B6006 $169500.00 0 No 96" 103.5" 70" 60 50 Table Swing U/R RPM HP
8390 BORING MILLS, VERTICAL and VTL King 84" Very Good No King 84" B6006 $99500.00 0 Yes 84" 90" 70" 55 40 Table Swing U/R RPM HP
8201 BORING MILLS, VERTICAL and VTL Niles 144" Good Yes Niles 144" B6006 $175000.00 0 Yes 144" 157" 120 19 75 Table Swing U/R RPM HP
8975 BORING MILLS, VERTICAL and VTL 1971/1980 O-M Ltd. TMO-20 Good Yes 1971/1980 O-M Ltd. TMO-20 B6006 $89500.00 0 Yes 78" 90" 63" 80 40 Table Swing U/R RPM HP
9103 BORING MILLS, VERTICAL and VTL 1968 Pensotti KN-950 Very Good Yes 34" 4-Jaw Chuck, 36" Swing, 35.43" Under Rail, 200 RPM, 25 HP, Turret Head, Side Head, Threading, Power Rapids, Floor Mount 1968 Pensotti KN-950 B6006 $22500.00 -1 Yes 33.9" 36" 35.433" 200 25 Table Swing U/R RPM HP
9032 BORING MILLS, VERTICAL and VTL 1975 Rafamet KCF-400 Very Good Yes 1975 Rafamet KCF-400 B6006 $349500.00 0 Yes 145" 162" 120" 40 75 Table Swing U/R RPM HP
8277 BORING MILLS, VERTICAL and VTL 1976/95 Schiess KE-100 Very Good Yes 1976/95 Schiess KE-100 B6006 $29500.00 0 Yes 39" 45" 52" 310 25 Table Swing U/R RPM HP
7336 BORING MILLS, VERTICAL and VTL 1952 Schiess KE-125 Good Yes 1952 Schiess KE-125 B6006 $49500.00 0 Yes 49.2" 55.1" 52.6" 237 30 Table Swing U/R RPM HP
8100 BORING MILLS, VERTICAL and VTL 2008 Vulcan C5116A Excellent Yes 2008 Vulcan C5116A B6006 $69500.00 0 Yes 55.12" 63" 39.37" 160 40 Table Swing U/R RPM HP
10393 BORING MILLS, VERTICAL and VTL 19?? Webster and Bennett 36" Very Good Yes 19?? Webster and Bennett 36" B6006 -1 Yes 36" 42" 30" 200 15 Table Swing U/R RPM HP
8490 BORING MILLS, VERTICAL and VTL 1960 Webster and Bennett 48" Good Yes 1960 Webster and Bennett 48" B6006 $18500.00 0 Yes 48" 57" 32" 100 30 Table Swing U/R RPM HP
10392 BORING MILLS, VERTICAL and VTL 19?? Webster and Bennett 36" Very Good Yes 19?? Webster and Bennett 36" B6006 -1 Yes 36" 42" 30" 200 15 Table Swing U/R RPM HP
10391 BORING MILLS, VERTICAL and VTL 19?? Webster and Bennett 48" Very Good Yes 19?? Webster and Bennett 48" B6006 -1 Yes 48" 52" 44" 100 25 Table Swing U/R RPM HP
9024 BORING MILLS, VERTICAL and VTL Webster and Bennett 60" Good Yes Webster and Bennett 60" B6006 $76000.00 0 Yes 60" 64" 35" 83 30" Table Swing U/R RPM HP
9861 BORING MILLS, VERTICAL and VTL, CNC and NC 2008 Amera-Seiki VT-1000T Fanuc OiTC Like New Yes 2008 Amera-Seiki VT-1000T Fanuc OiTC B6200 $299990.00 -1 Yes 39.4" 47.42" 27.5 1,200 50 Table Swing U/R RPM HP
10117 BORING MILLS, VERTICAL and VTL, CNC and NC 2010 Amera-Seiki VT-800 Fanuc OiTD New Yes 2010 Amera-Seiki VT-800 Fanuc OiTD B6200 $259200.00 -1 Yes 24" 31.5" 31.5 2,000 60 Table Swing U/R RPM HP
9684 BORING MILLS, VERTICAL and VTL, CNC and NC 2008 Amera-Seiki VT-600 Fanuc OiTC Very Good Yes 2008 Amera-Seiki VT-600 Fanuc OiTC B6200 $178900.00 -1 Yes 24" 29.43" 23.62" 2,000 40 Table Swing U/R RPM HP
10053 BORING MILLS, VERTICAL and VTL, CNC and NC Bullard 66" Dynatrol Fanuc OT Good Yes Bullard 66" Dynatrol Fanuc OT B6200 $150000.00 0 Yes 66" 79" 58" 160 100 Table Swing U/R RPM HP
8262 BORING MILLS, VERTICAL and VTL, CNC and NC 1986 Bullard 76" Dynatrol Allen Bradley 8200 Very Good Yes 1986 Bullard 76" Dynatrol Allen Bradley 8200 B6200 $249500.00 0 Yes 76" 88" 76" 210 100 Table Swing U/R RPM HP
10220 BORING MILLS, VERTICAL and VTL, CNC and NC Bullard 76" Dyn-Au-Tape Allen Bradley 8200 Good Yes Bullard 76" Dyn-Au-Tape Allen Bradley 8200 B6200 $165000.00 0 Yes 76" 88" 78" 186 75 Table Swing U/R RPM HP
9939 BORING MILLS, VERTICAL and VTL, CNC and NC 1968 Bullard 36" Dynatrol Fanuc OT Good Yes 36" 4-Jaw Manual Chuck, 39" Maximum Swing Side Head Up, 46" Maximum Swing Side Head Down, 30" Under Rail, 468 RPM, Turret Head, Side Head, Pendant Control, Power Indexing Turret Head, Power Indexing Turret Side Head, Variable Rapid Traverse 1968 Bullard 36" Dynatrol Fanuc OT B6200 $58000.00 -1 Yes 36" 46" 30" 500 50 Table Swing U/R RPM HP
8140 BORING MILLS, VERTICAL and VTL, CNC and NC 1968 Froriep 10KZ300 Allen Bradley 550 Good Yes 1968 Froriep 10KZ300 Allen Bradley 550 B6200 $395000.00 0 Yes 120" 132" 72" 56 70 Table Swing U/R RPM HP
10056 BORING MILLS, VERTICAL and VTL, CNC and NC Giddings and Lewis Series 70 Machine Mate Very Good Yes Giddings and Lewis Series 70 Machine Mate B6200 $84500.00 0 Yes 48" 60" 48" 2,000 50 Table Swing U/R RPM HP
10189 BORING MILLS, VERTICAL and VTL, CNC and NC 1978 Giddings and Lewis 48" Giddings & Lewis 800 Good Yes 1978 Giddings and Lewis 48" Giddings & Lewis 800 B6200 $129500.00 0 Yes 48" 60" 48" 333 40 Table Swing U/R RPM HP
8448 BORING MILLS, VERTICAL and VTL, CNC and NC 1971/2008 Giddings and Lewis 48" Fagor 8055 Excellent Yes 48" Table, 60" Swing, 60" Under Rail, 320 RPM, 50 HP, Turret Head, 180 IPM Rapids, Heidenhain Glass Scales on All Axis, Chip Enclosure Gaurds, New Bellows Covers, Re-Conditioned Ballscrews, All Ways Re-Ground and Fitted, Coolant System, Programmable Rail Head Elevation, Toolholders, CNC Controlled Turret Head With Heidenhain Rotary Encoder Feedback, Hydraulic Clamping on Rail Head 1971/2008 Giddings and Lewis 48" Fagor 8055 B6200 $155000.00 -1 Yes 48" 64" 60" 320 50 Table Swing U/R RPM HP
9864 BORING MILLS, VERTICAL and VTL, CNC and NC 1968/1990 Giddings and Lewis 48" Fanuc OT Good Yes 1968/1990 Giddings and Lewis 48" Fanuc OT B6200 $56900.00 0 Yes 48" 60" 48" 400 75 Table Swing U/R RPM HP
8210 BORING MILLS, VERTICAL and VTL, CNC and NC 1982 Giddings and Lewis Model 512 Giddings & Lewis 800 Good Yes 1982 Giddings and Lewis Model 512 Giddings & Lewis 800 B6200 $156900.00 0 Yes 48" 60" 48" 400 75 Table Swing U/R RPM HP
8571 BORING MILLS, VERTICAL and VTL, CNC and NC Giddings and Lewis VTL-60 GE Mark Centruy 2000 Good Yes Giddings and Lewis VTL-60 GE Mark Centruy 2000 B6200 $135000.00 0 Yes 60" 72" 68" 272 125 Table Swing U/R RPM HP
5997 BORING MILLS, VERTICAL and VTL, CNC and NC 1986 Gray 48" Ringmaster Fanuc 15T Very Good No 1986 Gray 48" Ringmaster Fanuc 15T B6200 $109500.00 0 Yes 48" 61.75" 48" 290 50 Table Swing U/R RPM HP
8222 BORING MILLS, VERTICAL and VTL, CNC and NC 1980/08 Gray RM 66 Fanuc OiT Rebuilt Yes 66" Table, 72" Swing, 66" Under Rail, 272 RPM, 50 HP, Single Turret Head, 66" 4-Jaw Manual Chuck, Chip Conveyor, Full Enclosure, Heidenhain Scales, New Control, AC Servos, 50 HP AC Spindle Motor 1980/08 Gray RM 66 Fanuc OiT B6200 $300000.00 -1 Yes 66" 72" 66" 272 50 Table Swing U/R RPM HP
9902 BORING MILLS, VERTICAL and VTL, CNC and NC 1953/1990 King 56" Centroid T 400 Very Good Yes 56" Table, 64" Swing, 42" UR, 100 RPM, 50 HP, 56" 4-Jaw Chuck, One Overhead Loading Winch, Set of Four (4) Table Jaws, Roll Around Control, Coolant System, Power Indexing Turret, Centroid T-400 Conversational Control Same As GE Fanuc 1953/1990 King 56" Centroid T 400 B6200 $70000.00 0 Yes 56" 62" 42" 100 50 Table Swing U/R RPM HP
8954 BORING MILLS, VERTICAL and VTL, CNC and NC 2009 New Century VTC 64 Fanuc OiTC Like New Yes 2009 New Century VTC 64 Fanuc OiTC B6200 $368000.00 0 Yes 64" 72" 52" 200 60 Table Swing U/R RPM HP
10528 BORING MILLS, VERTICAL and VTL, CNC and NC 1989 O-M Ltd. VT-5 20N Fanuc 15TF Good Yes 1989 O-M Ltd. VT-5 20N Fanuc 15TF B6200 $249500.00 0 Yes 78.74" 98.42" 80.75" 200 75 Table Swing U/R RPM HP
10269 BORING MILLS, VERTICAL and VTL, CNC and NC 1981 Rafamet KCH-250 GE 1050 Good Yes 1981 Rafamet KCH-250 GE 1050 B6200 $145000.00 0 Yes 98.43" 116" 110" 140 25 Table Swing U/R RPM HP
9862 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2009 Amera-Seiki VT-1000 ATC Fanuc OiTC Like New Yes 2009 Amera-Seiki VT-1000 ATC Fanuc OiTC B6200A $385000.00 -1 Yes 39.4" 47.42" 27.5 600 60 Table Swing U/R RPM HP
9863 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2010 Amera-Seiki VT-1600 ATC Fanuc 18iTB New No 2010 Amera-Seiki VT-1600 ATC Fanuc 18iTB B6200A $625000.00 -1 Yes 63" 78.74" 78.74" 256" 100 Table Swing U/R RPM HP
9810 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2010 Amera-Seiki VT-1200 ATC Fanuc OiTD New Yes 2010 Amera-Seiki VT-1200 ATC Fanuc OiTD B6200A $522000.00 -1 Yes 49.2" 63" 47.5" 312 60 Table Swing U/R RPM HP
10080 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1975 Berthiez TFM-200N Fanuc 21iT Very Good Yes 1975 Berthiez TFM-200N Fanuc 21iT B6200A $325000.00 0 Yes 81" 90" 69" 200 74 Table Swing U/R RPM HP
9824 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1996 Bullard 66" Fanuc 15T Good Yes 1996 Bullard 66" Fanuc 15T B6200A $155000.00 0 Yes 66" 79" 76" 278 100 Table Swing U/R RPM HP
10420 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2002 Century 110" Fanuc 18iTA Very Good Yes 2002 Century 110" Fanuc 18iTA B6200A $415000.00 0 Yes 110" 126" 65" 65 60 Table Swing U/R RPM HP
10362 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2003 Femco VL-12 Fanuc 18T Very Good Yes 2003 Femco VL-12 Fanuc 18T B6200A $185000.00 0 Yes 49.21" 62.99" 49.61" 280 60 Table Swing U/R RPM HP
10583 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1991 Giddings and Lewis Series 512 Giddings & Lewis 8000 Good Yes 1991 Giddings and Lewis Series 512 Giddings & Lewis 8000 B6200A $325000.00 0 Yes 48" 58" 42" 483 75 Table Swing U/R RPM HP
10266 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1991 Giddings and Lewis 42" Giddings & Lewis 8000 Good No 1991 Giddings and Lewis 42" Giddings & Lewis 8000 B6200A $115000.00 0 Yes 42" 48" 42" 480 60 Table Swing U/R RPM HP
10055 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1978/2005 Giddings and Lewis Series 512 Fanuc 21iT Good Yes 1978/2005 Giddings and Lewis Series 512 Fanuc 21iT B6200A $125000.00 0 Yes 48" 60" 48" 327 50 Table Swing U/R RPM HP
9821 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1985 Mazak A-12 Megaturn Mazatrol T-3 Good Yes 1985 Mazak A-12 Megaturn Mazatrol T-3 B6200A $158000.00 0 Yes 49.2" 57" 51" 350 45 Table Swing U/R RPM HP
8781 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1990 Mazak A-12 Megaturn Fanuc 15T Good Yes 1990 Mazak A-12 Megaturn Fanuc 15T B6200A $358900.00 0 Yes 49.2" 57" 51" 350 80 Table Swing U/R RPM HP
9054 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1997 Monarch VLN14 Fanuc 15TTA Very Good Yes 1997 Monarch VLN14 Fanuc 15TTA B6200A $329000.00 0 Yes 60" 67" 44" 235 50 Table Swing U/R RPM HP
10234 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1995 O-M Ltd. VT-5 16N Fanuc 15T Very Good Yes 1995 O-M Ltd. VT-5 16N Fanuc 15T B6200A $435000.00 0 Yes 66" 78" 78.75" 250 60 Table Swing U/R RPM HP
9421 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1985/1995 O-M Ltd. TDC-12N Fanuc 15T Very Good Yes 1985/1995 O-M Ltd. TDC-12N Fanuc 15T B6200A $295000.00 0 Yes 49.25" 63" 49 1/4" 350 50 Table Swing U/R RPM HP
8883 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1986 O-M Ltd. TDC-12N Fanuc 11T Very Good Yes 1986 O-M Ltd. TDC-12N Fanuc 11T B6200A $249000.00 0 Yes 49.25" 63" 39.37" 350 50 Table Swing U/R RPM HP
9298 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2002 O-M Ltd. Omega 80 Fanuc 18iT Very Good Yes 2002 O-M Ltd. Omega 80 Fanuc 18iT B6200A $295000.00 0 Yes 63" 78.75" 63" 320 75 Table Swing U/R RPM HP
10546 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1981 Schiess 16DS-125 Fanuc 8T Good Yes 1981 Schiess 16DS-125 Fanuc 8T B6200A $99500.00 0 Yes 49.21" 62.99" 49.21" 315 40 Table Swing U/R RPM HP
8339 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2008 Takang VL-100CM Fanuc 18iT New No 2008 Takang VL-100CM Fanuc 18iT B6200A $422000.00 0 Yes 39.3" 47.2" 36.4" 40 30 Table Swing U/R RPM HP
10239 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2008 Titan 57/65 Fanuc OiTC Excellent Yes 2008 Titan 57/65 Fanuc OiTC B6200A $300000.00 0 Yes 57.08" 65" 39.37" 250 60 Table Swing U/R RPM HP
10046 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2007 Topper TVL-10DC Very Good Yes 2007 Topper TVL-10DC B6200A $220000.00 0 Yes 40" 47.2 25.5" 350 30 Table Swing U/R RPM HP
10423 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2005 Toshiba TUE-20 Fanuc 18iT Good Yes 2005 Toshiba TUE-20 Fanuc 18iT B6200A 0 Yes 78.7" 90.5" 67.7" 200 60 Table Swing U/R RPM HP
10580 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1996 Toshiba TUD-20 Fanuc 15TA Very Good Yes 1996 Toshiba TUD-20 Fanuc 15TA B6200A $510000.00 0 Yes 78.74" 98.42" 81" 200 60 Table Swing U/R RPM HP
9417 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2001 Toshiba TUE-15 Fanuc 18T Very Good Yes 2001 Toshiba TUE-15 Fanuc 18T B6200A $359000.00 0 Yes 59" 70.86" 67.75" 250 50 Table Swing U/R RPM HP
8342 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2008 Toshiba TUE-20 Fanuc OiTC Like New Yes 2008 Toshiba TUE-20 Fanuc OiTC B6200A $565000.00 0 Yes 78.7" 90.5" 67.7" 200 60 Table Swing U/R RPM HP
8385 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1982/2009 Toshiba TMC-16A Fanuc 18T Rebuilt Yes 1982/2009 Toshiba TMC-16A Fanuc 18T B6200A $430000.00 0 Yes 71" 78.7" 63" 250 73" Table Swing U/R RPM HP
10422 BORING MILLS, VERTICAL and VTL, CNC W-MILLING and ATC 1996 Toshiba TMD-16 2-APC Fanuc 15TC Good Yes 1996 Toshiba TMD-16 2-APC Fanuc 15TC B6175A $384500.00 0 Yes 63" 78.7" 61" 280 60 Table Swing U/R RPM HP
7100 BRAKES, PRESS, HYDRAULIC 1985 Pacific 100-10 Good Yes 1985 Pacific 100-10 B7015 $24000.00 -1 Yes 100 10' 7.5" 10" 15 Ton Bed Stoke Throat HP
7099 BRAKES, PRESS, HYDRAULIC 1966 Pacific 200-10 Good Yes 200 Tons, 10' Bed, 8' 4" Between Housings, 7.5" Stroke, 25 HP, Hurco AutoBend 5 Back Gauge 1966 Pacific 200-10 B7015 $29900.00 -1 Yes 200 10' 7.5" 10" 25 Ton Bed Stoke Throat HP
8384 BRAKES, PRESS, HYDRAULIC 1974 Promecam RG-75-35 Good Yes 80 Tons, 122' Bed, 105" Between housings, 4" Stroke, 12" Open Height, 136 IPM Approach, 65 IPM Working, 127 IPM Return, 7.5 HP, Variable Stroke Adjustment, Adjustable Punch Holders, Full Length Treadle 1974 Promecam RG-75-35 B7015 $11500.00 0 Yes 80 122' 4" 16" 7.5 Ton Bed Stoke Throat HP
8454 BRAKES, PRESS, HYDRAULIC 1981 Promecam RG-65-25 Good Yes 120 Tons, 1/4" Mild Steel Capacity, 8' Bed, 90" Between housings, 8" Stroke, 15" Open Height, 136 IPM Approach, 65 IPM Working, 127 IPM Return, 25 HP, Manual Back Operated Back Gauge, Upper & Lower Die Holders, Overload Protection, Flush Mount Frame, Bed Tilt For Off-Set Bending, Off / Set/ Jog / Run / Single Modes, Large Selection of Tooling 1981 Promecam RG-65-25 B7015 $10500.00 0 Yes 65 8' 8" 16" 10 Ton Bed Stoke Throat HP
9134 BRAKES, PRESS, HYDRAULIC 1996 Wysong PH-6096 Wysong GC 6000 Very Good Yes 60 Tons, 1/4" Mild Steel Capacity, 8' Bed, 104" Between housings, 6" Stroke, 15" Open Height, 300 IPM Approach, 22 IPM Working, 225 IPM Return, 15 HP, 24" Two (2) Axis CNC Back Gauge, Operator Control Pedestal, Flush Mount Frame 1996 Wysong PH-6096 Wysong GC 6000 B7015 $16500.00 -1 Yes 60 96" 6" 10" 15 Ton Bed Stoke Throat HP
8449 BRAKES, PRESS, MECHANICAL 1978 Chicago Model 68-B Good Yes 1978 Chicago Model 68-B B7020 $14000.00 -1 Yes 55 8' 3" 8" 3 Ton Bed Stoke Throat HP
8433 BRAKES, PRESS, MECHANICAL 1956 Dreis and Krump 5510D Good Yes 1956 Dreis and Krump 5510D B7020 $16500.00 0 Yes 200 12' 6" 4" 8" 20 Ton Bed Stoke Throat HP
8626 BRAKES, PRESS, MECHANICAL Milwaukee 3045-5 Good Yes Milwaukee 3045-5 B7020 $7500.00 -1 Yes 40 6' 3" 8" Ton Bed Stoke Throat HP
8365 BROACHES, HORIZONTAL SURFACE 1985 US Broach 4T-36VHP 1985 US Broach 4T-36VHP B7870 0 4 36" 30 Ton Bed Stoke Throat HP
8900 COMPARATORS Jones and Lamson FC-14 Very Good Yes Jones and Lamson FC-14 C3806 $7500.00 -1 Yes Free Standing 14" 8" x 6" 30" x 6" .0005 Style Screen Range Stage Reolution
9028 COMPARATORS Optical Gaging Products Model Q30S Very Good Yes Optical Gaging Products Model Q30S C3806 $14900.00 0 Yes Free Standing 30" 12" x 10" x 3" 32" x 8" .0005 Style Screen Range Stage Reolution
9115 COMPARATORS 1990 Optical Gaging Products QL-30 Refurbished Yes 1990 Optical Gaging Products QL-30 C3806 $19900.00 0 Yes Free Standing 30" 12" x 6" 27" x 6 1/2" .0005 Style Screen Range Stage Reolution
8305 COOLANT FILTERING SYSTEMS 2005 Knoll SF 2000/F60-4 Excellent Yes 2005 Knoll SF 2000/F60-4 C5761 -1 Yes 360 Liters Per Min Flow Rate Max PSI Filtration HP
8304 COOLANT FILTERING SYSTEMS 2006 Knoll VRF 450/550 Excellent Yes 2006 Knoll VRF 450/550 C5761 -1 Yes 450 Liters per Min Flow Rate Max PSI Filtration HP
8907 COOLANT FILTERING SYSTEMS 2004 Transor FWC-110-TRP Very Good Yes 2004 Transor FWC-110-TRP C5761 $48000.00 -1 Yes 1 1 Milcron Flow Rate Max PSI Filtration HP
9958 COOLANT PUMP SYSTEM 2002 ChipBlaster 1513V Good No 2002 ChipBlaster 1513V C5760 $2800.00 -1 Yes 1,500 PSI 13 GPM 55 Gallons 10 Max. Presuure Max. CFM Tank Capacity HP
8327 COORDINATE MEASURING MACHINES 1997 Brown and Sharpe Micro-Xcel PFX 4-5-4 DCC Very Good Yes 22" x 30" x 17" Table, 18" x 20" x 16" Travels, Computer With MM4 Software, Digitizing and Scanning Capabilities, B & S Controller, Computer, Joystick Control 1997 Brown and Sharpe Micro-Xcel PFX 4-5-4 DCC C5901 $18000.00 -1 Yes Gantry 18" x 20" x 16" 22" x 30" x 17" 500 lbs Style Travels Work Area Work Load
8765 COORDINATE MEASURING MACHINES 1986 Brown and Sharpe Validator Good Yes 1986 Brown and Sharpe Validator C5901 -1 Yes Gantry 24" x 24" x 10" 26" x 24" x 29" 1,500 lbs Style Travels Work Area Work Load
8372 COORDINATE MEASURING MACHINES 1989 Brown and Sharpe Xcel 7-10-7 Very Good Yes 1989 Brown and Sharpe Xcel 7-10-7 C5901 $26000.00 -1 Yes Gantry 26" x 40" x 26" 26" x 42" x 111" 1,500 lbs Style Travels Work Area Work Load
10387 COORDINATE MEASURING MACHINES 1985 Numerex 2428-18 Very Good Yes 1985 Numerex 2428-18 C5901 $10500.00 -1 Yes Gantry 27.559" x 23.622" x 16" 36" x 25" x 10" 450 lbs Style Travels Work Area Work Load
8184 COORDINATE MEASURING MACHINES 2000 Optical Gaging Products Smartscope Avant ZIP 300 Very Good Yes 2000 Optical Gaging Products Smartscope Avant ZIP 300 C5901 $45000.00 0 Yes Bench 12" x 12" x 8" 14" x 12" 85 lbs Style Travels Work Area Work Load
8183 COORDINATE MEASURING MACHINES 1996 Optical Gaging Products Smartscope 200 MVP Very Good Yes 1996 Optical Gaging Products Smartscope 200 MVP C5901 $14000.00 0 Yes Bench 8" x 6" x 6" 10" x 8" 55 lbs Style Travels Work Area Work Load
8185 COORDINATE MEASURING MACHINES Optical Gaging Products Smartscope 200 MVP Very Good Yes Optical Gaging Products Smartscope 200 MVP C5901 $23000.00 0 Yes Bench 8" x 6" x 6" 10" x 8" 55 lbs Style Travels Work Area Work Load
8174 COORDINATE MEASURING MACHINES 1999 Renishaw Cyclone Digitizer Very Good Yes 26" x 25" x 18" Table, 23.6" x 19.7" x 15.7" Travels, Computer With Software, Extra Fixtures, Full Digitizing Capabilities 1999 Renishaw Cyclone Digitizer C5901 $21000.00 -1 Yes Gantry 23.6" x 19.7" x 15.7" 26" x 25" x 18" 440 lbs Style Travels Work Area Work Load
9772 COORDINATE MEASURING MACHINES 2007 Sheffield Discovery II D-8 Good No 2007 Sheffield Discovery II D-8 C5901 $32500.00 0 No Gantry 20" x 24" x 16" 250 lbs Style Travels Work Area Work Load
10118 DRILLING and TAPPING MACHINES CNC 1996 Amera-Seiki DTM-40 Mitsubishi 520M Good Yes 1996 Amera-Seiki DTM-40 Mitsubishi 520M D3797 $9800.00 -1 Yes 23.5" x 13.75" 20" x 13.75" x 18" 6,000 10 10 Table Travels RPM HP ATC
8684 DRILLING and TAPPING MACHINES CNC 2007 Ares Seiki R-560-14 Mitsubishi 64SM Very Good Yes 2007 Ares Seiki R-560-14 Mitsubishi 64SM D3797 $61000.00 0 Yes 25.6" x 16.1" 22" x 15.7" x 11.8" 12,000 10 14 Table Travels RPM HP ATC
9058 DRILLING and TAPPING MACHINES CNC 2006 Bridgeport DT-480-DT-APC Fanuc OiMC Very Good Yes 2006 Bridgeport DT-480-DT-APC Fanuc OiMC D3797 $35500.00 0 Yes 33.1" x 19.7" 18.89" x 12.6" x 16.9" 15,000 6 10 Table Travels RPM HP ATC
10303 DRILLING and TAPPING MACHINES CNC 1995 Brother TC-323 Brother CNC 730 Good Yes 33.1" x 19.7" Table, 16.5" x 12.6" x 10.2" Travels, 10,000 RPM, 30 Taper, 6 HP, 10 ATC, Quick Table Two Surface Pallet Changer 1995 Brother TC-323 Brother CNC 730 D3797 $17000.00 -1 Yes 33.1" x 19.7" 16.54" x 11.81" x 9.84" 10,000 4.6 10 Table Travels RPM HP ATC
9981 DRILLING and TAPPING MACHINES CNC 1994 Brother TC-221 Brother CNC 400 Good Yes 1994 Brother TC-221 Brother CNC 400 D3797 $15000.00 -1 Yes 23.6" x 11.8" 16.5" x 11.8" x 9.8" 6,000 2 10 Table Travels RPM HP ATC
10293 DRILLING and TAPPING MACHINES CNC 2001 Brother TC-22A Brother CNC AOO Very Good Yes 2001 Brother TC-22A Brother CNC AOO D3797 $39500.00 0 Yes 25.59" x 15.7" 19.68" x 15.7" x 16" 12,000 9.6 26 Table Travels RPM HP ATC
10304 DRILLING and TAPPING MACHINES CNC 1995 Brother TC-323 Brother CNC 730 Good Yes 1995 Brother TC-323 Brother CNC 730 D3797 $18500.00 -1 Yes 33.1" x 19.7" 16.54" x 11.81" x 9.84" 10,000 4.6 10 Table Travels RPM HP ATC
9840 DRILLING and TAPPING MACHINES CNC 2003 Brother TC-S2A-0 Brother CNC AOO Very Good Yes 2003 Brother TC-S2A-0 Brother CNC AOO D3797 $44500.00 0 Yes 31.5" x 12.6" 27.6" x 14.2" x 10.6" 10,000 8.4 14 Table Travels RPM HP ATC
9850 DRILLING and TAPPING MACHINES CNC 2003 Brother TC-22A-0 Brother CNC AOO Very Good Yes 2003 Brother TC-22A-0 Brother CNC AOO D3797 $60000.00 0 Yes 31.5" x 15.7" 27.5" x 15.7" x 16" 12,000 9.6 26 Table Travels RPM HP ATC
8642 DRILLING and TAPPING MACHINES CNC 1998 Brother TC-324 Brother CNC 630 Good Yes 1998 Brother TC-324 Brother CNC 630 D3797 $29500.00 0 Yes 33.1" x 19.7" 16.5" x 11.8" x 9.8" 10,000 6 10 Table Travels RPM HP ATC
9841 DRILLING and TAPPING MACHINES CNC 2003 Brother TC-S2B-0 Brother CNC AOO Very Good Yes 2003 Brother TC-S2B-0 Brother CNC AOO D3797 $42500.00 0 Yes 31.5" x 12.6" 27.5" x 14.17" x 12.6" 10,000 13 21 Table Travels RPM HP ATC
9901 DRILLING and TAPPING MACHINES CNC 2006 Brother TC-S2C Brother CNC AOO Very Good Yes 2006 Brother TC-S2C Brother CNC AOO D3797 $59900.00 0 Yes 31.5" x 12.6" 27.6" x 15.7" x 11.8" 10,000 13 14 Table Travels RPM HP ATC
10285 DRILLING and TAPPING MACHINES CNC 1995 Enshu DTCL APC Fanuc OM Good Yes 1995 Enshu DTCL APC Fanuc OM D3797 $19500.00 -1 Yes 23" x 11 3/4" 19.7" x 15.7" x 11.8" 10,000 7.4 16 Table Travels RPM HP ATC
9483 DRILLING and TAPPING MACHINES CNC 2008 Fanuc Robodrill A-T14iD Fanuc 31iA5 Excellent Yes 2008 Fanuc Robodrill A-T14iD Fanuc 31iA5 D3797 $129900.00 0 Yes 25.6" x 16" 19.68" x 15.75" x 12.99" 24,000 7.5 14 Table Travels RPM HP ATC
10267 DRILLING and TAPPING MACHINES CNC 2009 Fanuc Robodrill A-T21iFL Fanuc 31iA5 Very Good Yes 2009 Fanuc Robodrill A-T21iFL Fanuc 31iA5 D3797 $96500.00 0 Yes 33.46" x 16.14" 27" x 15.75" x 12.99" 10,000 14 21 Table Travels RPM HP ATC
10480 DRILLING and TAPPING MACHINES CNC 2000 Fanuc Robodrill A-T14iBL APC Fanuc 16iMA Very Good Yes 2000 Fanuc Robodrill A-T14iBL APC Fanuc 16iMA D3797 $54500.00 0 Yes 27.56" x 15.35" 27.56" x 15.75" x 13" 15,000 7.5 14 Table Travels RPM HP ATC
10481 DRILLING and TAPPING MACHINES CNC 2007 Fanuc Robodrill A-T14iE Fanuc 31iA5 Very Good Yes 33.46" x 16.14" Table, 27.56" x 15.75" x 12.99" Travels, 10,000 RPM, 30 Taper, 7.5 HP, 21 ATC, DDR Rotary Table, Rigid Tapping 2007 Fanuc Robodrill A-T14iE Fanuc 31iA5 D3797 $105000.00 0 Yes 25.6" x 15.74" 19.68" x 15.74" x 12.99" 10,000 7.5 14 Table Travels RPM HP ATC
9552 DRILLING and TAPPING MACHINES CNC 2000 Fanuc Robodrill A-T14iA APC Fanuc 16iM Very Good Yes 2000 Fanuc Robodrill A-T14iA APC Fanuc 16iM D3797 $46500.00 0 Yes 19.5" x 14.9" 19.7" x 14.98" x 11.8" 15,000 10.3 14 Table Travels RPM HP ATC
10564 DRILLING and TAPPING MACHINES CNC 2001 Fanuc Robodrill A-T14iB Fanuc16iM Very Good Yes 2001 Fanuc Robodrill A-T14iB Fanuc16iM D3797 $49500.00 0 Yes 25.6" x 15.74" 19.68" x 15.75" x 12.99" 15,000 7.5 14 Table Travels RPM HP ATC
10479 DRILLING and TAPPING MACHINES CNC 2005 Haas MDC-500 Haas 32 BIT Very Good Yes 2005 Haas MDC-500 Haas 32 BIT D3797 $57500.00 0 Yes 20" x 12.75" 20" x 14" x 20" 7,500 20 24 Table Travels RPM HP ATC
8435 DRILLING and TAPPING MACHINES CNC 1999 Hyundai SPT-V30TD Yasnac J-50M Very Good Yes Tables - 23.62" x 17.7, Travels - 19.68" x 11.81" x 11.81", 8,000 RPM, 7.5 HP, 14 ATC, Spindle Taper Air Blow, EIA / ISO, RS-232 Port Programming, Splash Guard 1999 Hyundai SPT-V30TD Yasnac J-50M D3797 $26500.00 -1 Yes 23.62" x 17.7" 19.68" x 11.81" x 11.81" 8,000 7.5 14 Table Travels RPM HP ATC
8739 DRILLS, GUN 1989 Techni-Drill BTA Good Yes 1989 Techni-Drill BTA D4554 $27500.00 0 Yes 1" 18" 10 2 Max. Cap. Stoke RPM HP Spindles
9887 DRILLS, H.D. and SENSITIVE, MULTI SPINDLE Natco F3B Good No Natco F3B D4803 -1 Yes 1 2,030 10 16 Max. Cap. Stoke RPM HP Spindles
9869 DRILLS, H.D. and SENSITIVE, MULTI SPINDLE 1981 Natco Good No 1981 Natco D4803 -1 Yes 1 25 16 Max. Cap. Stoke RPM HP Spindles
10182 DRILLS, HEAVY DUTY and SENSITIVE, SGL. VERT. SPDL. 1967 Giddings and Lewis Model 28 Good Yes 1967 Giddings and Lewis Model 28 D4810 $6800.00 -1 Yes 14" 1,200 10 1 Max. Cap. Stoke RPM HP Spindles
10394 DRILLS, RADIAL 19?? Carlton 5' x 17" Very Good Yes 19?? Carlton 5' x 17" D5700 -1 Yes 5' 17" 65" x 50" 1,000 15 Arm Column Table RPM HP
9269 DRILLS, RADIAL 1954 Carlton 4A Very Good Yes 6' Arm, 19" Column, 72" Under Spindle, 15 HP, 1,500 RPM, Power Clamping, Power Elevation, Box Table 1954 Carlton 4A D5700 $8000.00 -1 Yes 6' 19" 83" x 50" 1,500 15 Arm Column Table RPM HP
7552 DRILLS, RADIAL 1980 Cegielski (Polamco) GRV-554 Very Good Yes 8' Arm, 18" Column, 68.9" Under Spindle, 20 HP, 1,600 RPM, Drilling Capacity Mild Steel 2.5", Drilling Capacity Mild Cast 3.1", Box Table, Power Clamping, Power Elevation 1980 Cegielski (Polamco) GRV-554 D5700 $23000.00 -1 Yes 8' 18" 94" x 50" 1,600 20 Arm Column Table RPM HP
9027 DRILLS, RADIAL 1969 Giddings and Lewis Chipmaster Good Yes 1969 Giddings and Lewis Chipmaster D5700 $14500.00 0 Yes 63 3/4" 16" 71" x 42" 1,750 15 Arm Column Table RPM HP
9938 DRILLS, RADIAL 1962 Giddings and Lewis 6' x 15" Very Good Yes 15" Column, 6' Arm, 25 HP, # 6 Taper, Power Clamping to Arm and Head, Power Elevation of Arm, Power Rapid Head Traverse, Box Table 1962 Giddings and Lewis 6' x 15" D5700 $10000.00 -1 Yes 6' 17" 83" x 50" 1,500 25 Arm Column Table RPM HP
9026 DRILLS, RADIAL 1978 Ooya RE3-1600 Good Yes 1978 Ooya RE3-1600 D5700 $17500.00 0 Yes 63 3/4" 16" 83" x 45" 2,180 10 Arm Column Table RPM HP
10337 EDM - RAM, CNC 1999 Agie Mondo 2 Agie Futura IV Very Good Yes 1999 Agie Mondo 2 Agie Futura IV E2425 $15000.00 0 Yes 11.81" x 15.75" 11.8" x 15" x 12" 28" x 21" x 14" 40 Amp Table Travel Tank Power ATC
9382 EDM - RAM, CNC 1991 Charmilles Roboform 20 Charmilles Good Yes 15.62" x 11.8" Table, 11.81" x 9.8" x 9.8" Travels, 16 ATC, 32 Amps, 3-R Tooling, RS-232 Port, Transformer, Rustlick EDM Fluid, New Filters, 10,583 Cutting Hours 1991 Charmilles Roboform 20 Charmilles E2425 $11500.00 -1 Yes 15.62" x 11.8" 11.81" x 9.8" x 9.8" 29.1" x 20.5" x 13.6" 32 Amp 16 Table Travel Tank Power ATC
9767 EDM - RAM, CNC 1998 Hansvedt MS- 4 3050 Foreman Very Good Yes 1998 Hansvedt MS- 4 3050 Foreman E2425 $16000.00 -1 Yes 15" x 9" 12" x 7" x 8" 24" x 11" x 16" 30 / 50 Amp 6 Table Travel Tank Power ATC
8625 EDM - RAM, CNC 1993 Mitsubishi M-25-J Mitsubishi Control Very Good Yes 19.6" x 13.7" Table, 9.8" x 7.8" x 9.8" Travels, 29.53" x 13" x 20" Maximum Workpiece, 55 Amp, System 3-R Tooling, 1 Meg of Memory, 14" Color CRT, Programmable C-Axis, Fire Extinguisher, Filtration Unit, 3.5" Floppy Drive 1993 Mitsubishi M-25-J Mitsubishi Control E2425 $25000.00 -1 Yes 19.6" x 13.7" 9.8" x 7.8" x 9.8' 32" x 14" x 23" 55 Amp Table Travel Tank Power ATC
9429 EDM - RAM, CNC 1993 Mitsubishi M-25-J Mitsubishi Control Very Yes 19.6" x 13.7" Table, 9.8" x 7.8" x 9.8" Travels, 29.53" x 13" x 20" Maximum Workpiece, 35 Amp, System 3-R Tooling, 14" Color CRT, Programmable C-Axis, Fire Extinguisher, Transformer, Flexible Automatic Programming (FAP) 1993 Mitsubishi M-25-J Mitsubishi Control E2425 $28000.00 -1 Yes 19.6" x 13.7" 9.8" x 7.8" x 9.8" 32" x 14" x 23" 35 Amp Table Travel Tank Power ATC
8512 EDM - RAM, CNC 1997 Pacific PC-50 EX Good Yes 1997 Pacific PC-50 EX E2425 $16500.00 0 Yes 19" x 10" 10" x 6" x 6" 26" x 16" x 11" 55 Amp 16 Table Travel Tank Power ATC
10457 EDM - RAM, CNC 2006 Sodick AQ-55L Sodick Like New Yes 2006 Sodick AQ-55L Sodick E2425 $82000.00 0 Yes 30" x 22" 22" x 16" x 13.7" 37” x 16” x 29” 40 Amp 6 Table Travel Tank Power ATC
9188 LATHES, CNC, 2-AXIS, UNIVERSAL 1980 Mori-Seiki SL-6 Fanuc 6T Good Yes 1980 Mori-Seiki SL-6 Fanuc 6T L2150 $29000.00 0 Yes 35" 13.77" x 33.86" 1,800 3.5" 12 Swing Travels RPM Bar Cap. Stations
9017 LATHES, CNC, 2-AXIS, UNIVERSAL 2004 Mori-Seiki CL-2000 BT Mori-Seiki MSG-805 Very Good Yes 2004 Mori-Seiki CL-2000 BT Mori-Seiki MSG-805 L2150 $62000.00 0 Yes 20.1" 9.6" x 24" 3,500 2.5" 10 Swing Travels RPM Bar Cap. Stations
9691 LATHES, CNC, 2-AXIS, UNIVERSAL 1996 Mori-Seiki SL-75B Fanuc 18T Very Good Yes 1996 Mori-Seiki SL-75B Fanuc 18T L2150 $209900.00 0 Yes 35.8" 15.75" x 61" 1,010 5.6" 12 Swing Travels RPM Bar Cap. Stations
9682 LATHES, CNC, 2-AXIS, UNIVERSAL 1981 Mori-Seiki LL-7B 2500 Fanuc OT Good Yes 1981 Mori-Seiki LL-7B 2500 Fanuc OT L2150 $84500.00 0 Yes 42.9" 26.5" x 98" 1,150 4.1" 8 Swing Travels RPM Bar Cap. Stations
9681 LATHES, CNC, 2-AXIS, UNIVERSAL 1986 Mori-Seiki LL-8B 1500 Fanuc 11T Very Good Yes 1986 Mori-Seiki LL-8B 1500 Fanuc 11T L2150 $186500.00 0 Yes 54" 28.1" x 64" 550 14.5" 8 Swing Travels RPM Bar Cap. Stations
9613 LATHES, CNC, 2-AXIS, UNIVERSAL 2002 Mori-Seiki CL-2000 B Mori-Seiki MSG-805 Very Good Yes 2002 Mori-Seiki CL-2000 B Mori-Seiki MSG-805 L2150 $49500.00 0 Yes 20.1" 9.6" x 14.6" 3,500 2.5" 10 Swing Travels RPM Bar Cap. Stations
10566 LATHES, CNC, 2-AXIS, UNIVERSAL 2007 Okuma ES-L8 II OSP-U10L Very Good Yes Swing 21.65", Swing Over C.S. 20.47", Maximum Turning Diameter 12.20", Length 19.68", 3,500 RPM, 20 HP, 12 Sta. Turret, 10" 3-Jaw Hydraulic Chuck, Chip Conveyor, Some Turret Tooling, S30 Collet Chuck, Part Catcher, Hydraulic Tailstock, One Touch IGF 2007 Okuma ES-L8 II OSP-U10L L2150 $62000.00 0 Yes 21.65" 8.10" x 20.47" 3,000 2.75" 12 Swing Travels RPM Bar Cap. Stations
10019 LATHES, CNC, 2-AXIS, UNIVERSAL 1993 Okuma Cadet LNC-8 OSP-5020L Good Yes 1993 Okuma Cadet LNC-8 OSP-5020L L2150 $18500.00 0 Yes 15.75" 6.87" x 20.47" 4,200 1.77" 12 Swing Travels RPM Bar Cap. Stations
10559 LATHES, CNC, 2-AXIS, UNIVERSAL 1982 Okuma LC-30 1SC / 1000 OSP-3000L Good Yes 19.69" Swing, 16.14 SOC, 17.72 Max. Dia., 38.58 Length, 2.5" Bar Cap., 30 HP, 12 Sta. Turret, Tailstock, 12" 3-Jaw Chuck, Miscellaneous Tool Holders, Chip Conveyor, Coolant System, RS-232 Port 1982 Okuma LC-30 1SC / 1000 OSP-3000L L2150 $8000.00 -1 Yes 19.69" 11.42" x 40.16" 3,000 2.5 12 Swing Travels RPM Bar Cap. Stations
8261 LATHES, CNC, 2-AXIS, UNIVERSAL 1989 Okuma LC-30 1SC / 1000 OSP-5000LG Fair Yes 1989 Okuma LC-30 1SC / 1000 OSP-5000LG L2150 $22500.00 -1 Yes 19.69" 11.42" x 40.16" 3,000 2.5" 12 Swing Travels RPM Bar Cap. Stations
10560 LATHES, CNC, 2-AXIS, UNIVERSAL 1988 Okuma LC-40 1SC / 750 OSP-5000L Good Yes 1988 Okuma LC-40 1SC / 750 OSP-5000L L2150 $18000.00 -1 Yes 23.62" 11.22" x 28.74" 2,500 3" 12 Swing Travels RPM Bar Cap. Stations
10622 LATHES, CNC, 2-AXIS, UNIVERSAL 2000 Okuma Crown L-1060 SB OSP-700L Very Good Yes 2000 Okuma Crown L-1060 SB OSP-700L L2150 $39900.00 0 Yes 21.65" 7.28" x 20.47" 4,200 2.2 12 Swing Travels RPM Bar Cap. Stations
7362 LATHES, CNC, 2-AXIS, UNIVERSAL 2000 Okuma Crown L-1420 / 650 BB OSP-U10L Good Yes 24.41 Swing, 18.90" S.O.C. , 14.17" Turning Dia., 27" Centers, 2,800 RPM, 30 HP, 4.72 Spindle Bore, 12 Sta. Turret, 15" 3-Jaw Kitagawa Hydraulic Chuck, Tow Along Tailstock, IGF, Lap 4, Auto Chamfering, MAC Man, Nose Radius 2B 2000 Okuma Crown L-1420 / 650 BB OSP-U10L L2150 $59900.00 -1 Yes 24.41" 9.05" x 26.38" 2,800 3.62" 12 Swing Travels RPM Bar Cap. Stations
10365 LATHES, CNC, 2-AXIS, UNIVERSAL 1995 Okuma Crown L-1420 / 650 BB OSP-5020L Very Good Yes 1995 Okuma Crown L-1420 / 650 BB OSP-5020L L2150 $34500.00 0 Yes 24.41" 9.05" x 26.38" 2,800 3.62" 12 Swing Travels RPM Bar Cap. Stations
10400 LATHES, CNC, 2-AXIS, UNIVERSAL 2002 Okuma ES-L10 III OSP-U10L Good Yes Swing 21.65", Swing Over Cross Slide 20.47", Maximum Turning Diameter 12.20", Length 19.68", 3,000 RPM, 15 HP, 12 Sta. Turret, Tailstock, 10" 3-Jaw Chuck, Chip Conveyor 2002 Okuma ES-L10 III OSP-U10L L2150 $42500.00 0 Yes 21.65" 8.10" x 20.47" 3,800 2.75" 12 Swing Travels RPM Bar Cap. Stations
10160 LATHES, CNC, 2-AXIS, UNIVERSAL 1997 Okuma Crown 762 BB OSP-700L Very Good Yes 1997 Okuma Crown 762 BB OSP-700L L2150 $39500.00 0 Yes 21.65" 7.28" x 20.47" 3,500 2.75" 12 Swing Travels RPM Bar Cap. Stations
10593 LATHES, CNC, 2-AXIS, UNIVERSAL 2001 Okuma LB-45 II-3000 OSP-7000L Very Good Yes 2001 Okuma LB-45 II-3000 OSP-7000L L2150 $249500.00 0 Yes 33.7" 17.32" x 81.1" 2,800 3.75" 12 Swing Travels RPM Bar Cap. Stations
10161 LATHES, CNC, 2-AXIS, UNIVERSAL 1999 Okuma Crown 762 BB OSP-U10L Good Yes 1999 Okuma Crown 762 BB OSP-U10L L2150 $24500.00 0 Yes 21.65" 7.28" x 20.47" 3,500 2.75" 12 Swing Travels RPM Bar Cap. Stations
10595 LATHES, CNC, 2-AXIS, UNIVERSAL 1993 Okuma LB-15 OSP-5020L Good Yes 1993 Okuma LB-15 OSP-5020L L2150 $16500.00 0 Yes 15.75" 6.89" x 20.47" 4,200 1.75" 12 Swing Travels RPM Bar Cap. Stations
9935 LATHES, CNC, 2-AXIS, UNIVERSAL 1984 Okuma LH-50NBD 2000 OSP-3000L Very Good Yes 1984 Okuma LH-50NBD 2000 OSP-3000L L2150 $26500.00 0 Yes 36.02" 16" x 59" 1,000 6.89" 8 / 8 Swing Travels RPM Bar Cap. Stations
9355 EDM - RAM, CNC 1986 Sodick A3C Sodick Mark VII Good Yes 1986 Sodick A3C Sodick Mark VII E2425 $4500.00 -1 Yes 30" x 20" 12" x 8" x 10" 36" x 16" x 22" 40 Amp Table Travel Tank Power ATC
9749 EDM - WIRE, CNC 1991 Agie Agitron 50 Agiematic D Yes 1991 Agie Agitron 50 Agiematic D E2475 -1 On Way 21 1/2" x 17 1/2" 23" x 19" x 10" 317 Gallons 30 Amp Table Travel Tank Power
10241 EDM - WIRE, CNC 2001 Agie Classic 2 Agievision 2 Excellent Yes Maximum Workpiece Size - 29.5" x 21.6" x 9.8", Travels - 13.8" x 9.8" x 10.1" x 2.8" x 2.8", AWT, Dial Arm and Indicator, Affinity Chiller, Manual Pulse Generator, Full Five Axis Control, High Speed Super Surface (HSSC) Generator, Wire Extraction and Chopping System, Alignment Device 2001 Agie Classic 2 Agievision 2 E2475 $62500.00 -1 Yes 31" x 22" 13.7795" x 9.8425" x 10.07872" 34" x 24" x 12" Table Travel Tank Power
9508 EDM - WIRE, CNC 2002 Charmilles Robofil 690 Charmilles Very Good Yes 2002 Charmilles Robofil 690 Charmilles E2475 $85900.00 0 Yes 48.3" x 36.4" 31.5" x 23.6" x 15.75" 317 Gallons 50 Amp Table Travel Tank Power
7035 EDM - WIRE, CNC 2001 Charmilles Robofil 240 Charmilles Very Good Yes 2001 Charmilles Robofil 240 Charmilles E2475 $62000.00 -1 Yes 26.77" x 17.72" 13.77" x 8.66" x 8.66" 201 Gallons 40 Amp Table Travel Tank Power
10504 EDM - WIRE, CNC 1990 Leblond-Makino Model EE3 Good Yes 1990 Leblond-Makino Model EE3 E2475 $10500.00 -1 Yes 19.5" x 14.5" 14.2" x 9.8" x 9" 64 Table Travel Tank Power
10175 EDM - WIRE, CNC 2007 Makino SP-43 Makino WireWIZARD Excellent Yes 2007 Makino SP-43 Makino WireWIZARD E2475 $80000.00 -1 Yes 28.7" x 22.8" 17.8" x 11.8" x 12.6" 105 Gallons 50 Amp Table Travel Tank Power
10008 EDM - WIRE, CNC 1999 Mitsubishi FX-10 K Mitsubishi Very Good Yes 1999 Mitsubishi FX-10 K Mitsubishi E2475 $40000.00 0 Yes 24.80" x 20.86" 13.77" x 9.84" x 8.66" 105 Gallons 50 Amp Table Travel Tank Power
10018 EDM - WIRE, CNC 1998 Mitsubishi FX-10 K Mitsubishi Needs Repair Yes 1998 Mitsubishi FX-10 K Mitsubishi E2475 $39000.00 0 Yes 24.80" x 20.86" 13.79" x 9.84" x 8.66" 105 Gallons 50 Amp Table Travel Tank Power
10017 EDM - WIRE, CNC 1999 Mitsubishi FX-10 K Mitsubishi Very Good Yes 1999 Mitsubishi FX-10 K Mitsubishi E2475 $40000.00 0 Yes 24.80" x 20.86" 13.79" x 9.84" x 8.66" 105 Gallons 50 Amp Table Travel Tank Power
9800 EDM - WIRE, CNC 2000 Mitsubishi FX-20K Very Good Yes 2000 Mitsubishi FX-20K E2475 $42500.00 0 Yes 30.7" x 24.8" 19.69" x 13.77" x 11.81" 210 Gallons 50 Amp Table Travel Tank Power
9053 EDM - WIRE, CNC 1996/2007 Mitsubishi FX-10 Mitsubishi Very Good Yes 1996/2007 Mitsubishi FX-10 Mitsubishi E2475 $39900.00 0 Yes 24.80" x 20.86" 13.77" x 9.84" x 8.66" 105 Gallons 50 Amp Table Travel Tank Power
10020 EDM - WIRE, CNC 1996/2007 Mitsubishi FX-10 K Mitsubishi Very Good Yes 1996/2007 Mitsubishi FX-10 K Mitsubishi E2475 $44000.00 0 Yes 24.80" x 20.86" 13.79" x 9.84" x 8.66" 105 Gallons 50 Amp Table Travel Tank Power
9357 EDM - WIRE, CNC 1996/2005 Sodick A-500 WP Sodick Mark-21 Excellent Yes Tank - 30" x 18" x 12", Travels - 19.685" x 13.8" x 10.63", 50 Amp, Floppy Drive, Simultaneous U-V Taper Control, Chiller, APT Programmer, Automatic Wire Threading, Machine Refurbished in 2005, Very Little Use Since 1996/2005 Sodick A-500 WP Sodick Mark-21 E2475 $30000.00 -1 Yes 30" x 20" 19.85" x 13.8" x 10.63" 105 Gallons 50 Amp Table Travel Tank Power
8980 END FINISHING MACHINES (Including NC and CNC) Vaill 6A Good Yes Vaill 6A E5650 $4955.00 0 Yes 1 1/2" 3" 1 1/2" 7,800 Lbs Diameter Work Stroke Work Speed Clamp Stroke Work Pressure
8981 END FINISHING MACHINES (Including NC and CNC) Vaill 7A Good Yes Vaill 7A E5650 $7950.00 0 Yes 3 1/2" 6" 2 1/2" per sec 2" 42,000 Lbs Diameter Work Stroke Work Speed Clamp Stroke Work Pressure
9190 FLAME CUTTER, CNC 2008 Torchmate Torchmate 3 Torchmate Like New Yes 48" x 96" Cutting Capacity, 1/4" - 1 1/2" Plasma Cutting Capacity, Hypertherm 1650 Head, Automatic Height Control Sensing On Plasma Head To Prevent Warping 2008 Torchmate Torchmate 3 Torchmate F1925 $9900.00 -1 Yes 1 Cut Cap. Rail Style # Head
10501 GRINDERS, BELT 1994 Timesaver 137-1HDMW Very Good Yes 37" Wide Belt, 36" x 8" Part Cap., 20 HP, Wet Base, Fully Equipped, Many Extra Grinding Belts 1994 Timesaver 137-1HDMW G3975 $15000.00 -1 Yes 37" 36" 8" 20 Wet Conveyor Width Max. Part Width Max. Part Height HP Collector System
8999 GRINDERS, CRANKSHAFT Landis 22" x 76" Good Yes Landis 22" x 76" G4526 $37500.00 0 Yes 1 Swing Centers Wheel HP Stoke
9001 GRINDERS, CRANKSHAFT Landis 22" x 76" Good Yes Landis 22" x 76" G4526 $26500.00 0 Yes 1 Swing Centers Wheel HP Stoke
8995 GRINDERS, CRANKSHAFT Schou 1500/270 Good Yes Schou 1500/270 G4526 $19500.00 0 Yes 1 Swing Centers Wheel HP Stoke
8996 GRINDERS, CRANKSHAFT Schou 1600/260P Good Yes Schou 1600/260P G4526 $19500.00 0 Yes 1 Swing Centers Wheel HP Stoke
8994 GRINDERS, CRANKSHAFT 1983 Schou 2000/340 Good Yes 1983 Schou 2000/340 G4526 $19500.00 0 Yes 1 Swing Centers Wheel HP Stoke
8484 GRINDERS, CYLINDRICAL UNIVERSAL 19?? Cincinnati DE Fair Yes 19?? Cincinnati DE G4800 -1 Yes 1 Swing Centers Table Grind Wheel Work Wheel
8711 GRINDERS, CYLINDRICAL UNIVERSAL 1975 Heald 273A Very Good Yes 1975 Heald 273A G4800 $27500.00 0 Yes 1 Swing Centers Table Grind Wheel Work Wheel
8353 GRINDERS, CYLINDRICAL UNIVERSAL 1975 Karsten KC-AS 1600 Good Yes 14.17" Work Dia., 63" Length, 14.74" x 4" x 5" Wheel, Internal Spindle, Pendant Control, Wheel Dresser, Barnes Coolant Filtration System, Holding Tight Tolerances of +/- .00025 1975 Karsten KC-AS 1600 G4800 $22500.00 -1 Yes 1 Swing Centers Table Grind Wheel Work Wheel
8992 GRINDERS, CYLINDRICAL UNIVERSAL 1995/2002 Landis 1R Fanuc 18GCA Very Good Yes 1995/2002 Landis 1R Fanuc 18GCA G4800 $19500.00 0 Yes 1 Swing Centers Table Grind Wheel Work Wheel
8193 GRINDERS, CYLINDRICAL UNIVERSAL Landis Type F Good Yes Landis Type F G4800 $139500.00 0 Yes 1 Swing Centers Table Grind Wheel Work Wheel
8192 GRINDERS, CYLINDRICAL UNIVERSAL 2000 SMTW H147 Very Good Yes 2000 SMTW H147 G4800 $139500.00 0 Yes 1 Swing Centers Table Grind Wheel Work Wheel
8247 GRINDERS, CYLINDRICAL UNIVERSAL 1983 Tos BU 28-1000 Very Good Yes 1983 Tos BU 28-1000 G4800 $26500.00 0 Yes 1 Swing Centers Table Grind Wheel Work Wheel
9732 GRINDERS, CYLINDRICAL UNIVERSAL Tos BUH 5A / 2000 Good Yes Tos BUH 5A / 2000 G4800 0 Yes 19.6" 78.6" 19.6" x 2.35" x 12" Swing Centers Table Grind Wheel Work Wheel
8190 GRINDERS, CYLINDRICAL UNIVERSAL 1988 Tos BUT 63 / 3000 Good Yes 1988 Tos BUT 63 / 3000 G4800 $83000.00 0 Yes 1 Swing Centers Table Grind Wheel Work Wheel
10548 GRINDERS, CYLINDRICAL UNIVERSAL 1997 Toyoda GUP32 Very Good Yes 12.6" Swg., 39.37" BC, 14" x 2" x 5" Wheel, 5 HP, 8" 6-Jaw Chuck, Transformer, Wheel Dresser 1997 Toyoda GUP32 G4800 $22500.00 0 Yes 12.59" 100" 9" x 100" 14" x 2" x 5" Swing Centers Table Grind Wheel Work Wheel
8191 GRINDERS, CYLINDRICAL UNIVERSAL 1988 WMW SA6 x 3000 Good Yes 1988 WMW SA6 x 3000 G4800 $89500.00 0 Yes 1 Swing Centers Table Grind Wheel Work Wheel
9050 GRINDERS, CYLINDRICAL, NC and CNC 1992 Okuma GA-44 OSP-5020G Good No 1992 Okuma GA-44 OSP-5020G G4601 $52000.00 -1 Yes 1 Max. Dia. Length Travels RPM HP
10031 GRINDERS, CYLINDRICAL, PLAIN (Angle head) CNC 1999 Mitsubishi RD-32B 50P Fanuc 18T Good Yes 1999 Mitsubishi RD-32B 50P Fanuc 18T G4765 $39500.00 0 Yes 1 Swing Max. Length Wheel Wheelhead Speed Workhead Speed
9884 GRINDERS, CYLINDRICAL, PLAIN (Angle head) CNC 2003 Mitsubishi PD-32B 50A Fanuc 21iT Very Good Yes 2003 Mitsubishi PD-32B 50A Fanuc 21iT G4765 $82500.00 0 Yes 1 Swing Max. Length Wheel Wheelhead Speed Workhead Speed
9885 GRINDERS, CYLINDRICAL, PLAIN (Angle head) CNC 2002 Mitsubishi RB-32B 50A Fanuc 16G Good Yes 2002 Mitsubishi RB-32B 50A Fanuc 16G G4765 $43000.00 0 Yes 1 Swing Max. Length Wheel Wheelhead Speed Workhead Speed
10609 GRINDERS, CYLINDRICAL_UNIVERSAL, NC and CNC 2006 Okamoto OGM-12 60 PB Fanuc Powermate-G Excellent Yes 2006 Okamoto OGM-12 60 PB Fanuc Powermate-G G4820 $79500.00 0 Yes 12.59" 60" 18" x 84" 16" x 2" x 5" 500 Swing Centers Table Wheel Work Head Speed
9004 GRINDERS, CYLINDRICAL_UNIVERSAL, NC and CNC 1999 Toyoda GU4-100 Toyoda Good Yes 1999 Toyoda GU4-100 Toyoda G4820 $79500.00 0 Yes 1 Swing Centers Table Wheel Work Head Speed
10349 GRINDERS, JIG, NC and CNC 2000 Hauser S55-400 Fanuc 16M Very Good Yes 2000 Hauser S55-400 Fanuc 16M G6720 $625000.00 0 Yes 1 Table Travels Max. Dia. RPM HP
9812 GRINDERS, JIG, NC and CNC 19?? Moore #1 Good Yes 19?? Moore #1 G6720 $3000.00 -1 Yes 1 Table Travels Max. Dia. RPM HP
9008 GRINDERS, JIG, NC and CNC 1997 Moore #3 Fagor 8030 Very Good Yes 1997 Moore #3 Fagor 8030 G6720 $56500.00 0 Yes 1 Table Travels Max. Dia. RPM HP
8803 GRINDERS, ROLL Cincinnati 36" x 240" Good Yes Cincinnati 36" x 240" G7426 $150000.00 0 Yes 1 Dia. Grind Wheel Bed HP
8224 GRINDERS, SURFACE, RECIP. TABLE, (Horizontal Spdl), NC and CNC 2000 K.O. Lee S1024523 Leematic Very Good No 24" x 10" Table, 28" x 11 3/4" Travels, 5 HP, 1,900 RPM, Leematic Programmable Control, Table Speed Flow Control Valves, Spindle RPM and Load Indicator, Separate Coolant Tank and Pump, Magnetic Chuck 2000 K.O. Lee S1024523 Leematic G8030 $14000.00 -1 Yes 1 Length x Width Under Wheel Travels Wheel Dia. HP
7837 GRINDERS, SURFACE, RECIP. TABLE, (Horizontal Spdl), NC and CNC 2003 Tru Tech TT-8000 Tru Tech Like New Yes 18" x 6" Chuck, 12" x 6" Travels, 3 HP, Pentium IV Computer, Pick-N-Place Talking Software With Built-In Program Self-Training, Fully Programmable Variable Speed Workhead, Diamond Grinding Wheel, Mounted and Balanced on Flange, Wheel Dressing Attachment, Balancing Arbor, Coolant Tank With Filter System and Hoses, 3" Ultra-Precision Grinding Unit, Through Feed Attachment For Centerless Grinding Work, Multiple Plunge, OD, ID, And Contour Grinding Capabilities, Mist Buster 500 2003 Tru Tech TT-8000 Tru Tech G8030 $58000.00 -1 Yes 1 Length x Width Under Wheel Travels Wheel Dia. HP
9718 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 2004 Chevalier 24" x 60" Very Good 2004 Chevalier 24" x 60" G8025 $59500.00 0 Yes 24" x 60" 24" 60" x 24" 16" 15 Table U/W Travels Grind Wheel HP
9961 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 1995 Chevalier Super 818 Very Good Yes 1995 Chevalier Super 818 G8025 $7000.00 -1 Yes 8" x 18" 12" 18" x 8" 8" 2 Table U/W Travels Grind Wheel HP
9719 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 1945 Gallmeyer and Livingston Model F Good Yes 1945 Gallmeyer and Livingston Model F G8025 $26500.00 0 Yes 24" x 96" 25" 96" x 30" 20" 30 Table U/W Travels Grind Wheel HP
9766 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 1977 Harig 612 Super Very Good Ye 12" x 6" Chuck, 13 1/2" X Travel, 7" Y Travel, 1 1/2 HP, 3,450 RPM, Power Longitudinal & Cross Feed, Coolant System, Walker Elector Magnetic Chuck, Fine Feed Adjust For Cross and Down Feed, New Crossfeed Screw 1977 Harig 612 Super G8025 $2400.00 -1 Yes 1 10" 13 1/2" x 7" 7" 1 1/2 Table U/W Travels Grind Wheel HP
9717 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 1974 Mattison 24" x 72" Very Good Yes 1974 Mattison 24" x 72" G8025 $39500.00 0 Yes 24"x 72" 20" 84" x 36" 20" 30 Table U/W Travels Grind Wheel HP
9720 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 1980 Mattison Model 24 Good 1980 Mattison Model 24 G8025 0 Yes 24" x 48" 18" 48" x 24" 28" 15 Table U/W Travels Grind Wheel HP
8963 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 2000 Okamoto ACC-1632 ST Good Yes 32" x 16" Chuck, 37.5" x 17.5" Travels, 3 HP, Hydraulic Over The Wheel Dresser, Incremental Downfeed, Walker Fine Line Chuck, Many Extras 2000 Okamoto ACC-1632 ST G8025 $22500.00 0 Yes 1 21.5" 37.4" x 17.3" 12" 5 Table U/W Travels Grind Wheel HP
8602 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 1992 Okamoto ACC-124N Good Yes 1992 Okamoto ACC-124N G8025 $12000.00 0 Yes 1 13" 29.5" x 13.6" 12" 5 Table U/W Travels Grind Wheel HP
9270 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 1999 Okamoto 820A Very Good Yes 18" x 8" Walker Magnetic Chuck, 18" Under Wheel, 20" x 8" Travels, 1 1/3 HP, Two (2) Axis DRO, Fine Cross and Vertical Feeds, Power Elevation, External Coolant Pump and Tank 1999 Okamoto 820A G8025 $12000.00 -1 Yes 1 18" 23" x 13" 8" 1 1/3 Table U/W Travels Grind Wheel HP
9007 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 1995 Okamoto 2040 EX Good Yes 1995 Okamoto 2040 EX G8025 $54000.00 0 Yes 1 21.5" 45.3" x 18.2" 12" 5 Table U/W Travels Grind Wheel HP
9831 LATHES, CNC, 4-AXIS, UNIVERSAL 1982 Okuma LC-40 2ST / 250 OSP-3000L Good Yes 1982 Okuma LC-40 2ST / 250 OSP-3000L L21504 $14500.00 0 Yes 23.62" 11.80" x 21.65" 2,500 3" 20 Swing Travels RPM Bar Cap. Stations
9798 LATHES, CNC, 4-AXIS, UNIVERSAL 1991 Okuma LR-15 OSP-5020L Very Good Yes 1991 Okuma LR-15 OSP-5020L L21504 $15500.00 0 Yes 17.72" 8.5" x 23.62" 3,800 2.75" 18 Swing Travels RPM Bar Cap. Stations
9743 LATHES, CNC, 4-AXIS, UNIVERSAL 1990 Okuma LR-15 OSP-5020L Good No 1990 Okuma LR-15 OSP-5020L L21504 -1 On Way 17.72" 8.5" x 23.62" 3,800 2.75" 18 Swing Travels RPM Bar Cap. Stations
8633 LATHES, CNC, 4-AXIS, W-MILLING 2006 Amera-Seiki TS-52 MC Mitsubishi 64S Demo Yes 2006 Amera-Seiki TS-52 MC Mitsubishi 64S L21254M $75500.00 -1 Yes 12.59" 5.65" x 14.3" 4,000 2.05" 13 Swing Travels RPM Bar Cap. Stations
9737 LATHES, CNC, 4-AXIS, W-MILLING 1997 Mori-Seiki ZL-25 MC / 1000 Fanuc MSG-501 Good Yes 1997 Mori-Seiki ZL-25 MC / 1000 Fanuc MSG-501 L21254M $73000.00 0 Yes 20.47" 11.3" x 42.9" 3,500 2.8" 20 Swing Travels RPM Bar Cap. Stations
9677 LATHES, CNC, 4-AXIS, W-MILLING 1991 Okuma LC-40M Simulturn OSP-5020L Very Good Yes 1991 Okuma LC-40M Simulturn OSP-5020L L21254M $24000.00 0 Yes 23.62" 11.22" x 21.65" 2,500 2.75" 20 Swing Travels RPM Bar Cap. Stations
8561 LATHES, CNC, 4-AXIS, W-MILLING 1988 Okuma LC-40M Simulturn OSP-5000LG Very Good Yes 1988 Okuma LC-40M Simulturn OSP-5000LG L21254M $22500.00 0 Yes 23.62" 11.22" x 41.34" 2,500 2.87" 20 Swing Travels RPM Bar Cap. Stations
10130 LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 2005 Daewoo Puma-TT-2000 SY Fanuc 18iTB Very Good Yes 2005 Daewoo Puma-TT-2000 SY Fanuc 18iTB L21254MS $189000.00 0 Yes 31.5" 10" x 31.5" 5,000 2.6" 24 Swing Travels RPM Bar Cap. Stations
10573 LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 2004 Daewoo Puma-TT-2000 SY Fanuc 18iT Good Yes 2004 Daewoo Puma-TT-2000 SY Fanuc 18iT L21254MS $138500.00 0 Yes 31.5" 10" x 31.5" 5,000 2.6" 24 Swing Travels RPM Bar Cap. Stations
10537 LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 2010 Doosan Puma-TT-1800 SY Fanuc 31iT Very Good Yes 2010 Doosan Puma-TT-1800 SY Fanuc 31iT L21254MS $269900.00 0 Yes 20.6" 6.5" x 27.5" x 3.9" 4,000 2.6" 24 Swing Travels RPM Bar Cap. Stations
8266 LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 2002 Doosan Z340SM Fanuc 18iTB Like New Yes 2002 Doosan Z340SM Fanuc 18iTB L21254MS $125000.00 -1 Yes 26.77" 7.28" x 25.59" 5,000 2.44" 24 Swing Travels RPM Bar Cap. Stations
9450 LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 2000 Emco Maier Emco-Turn 332 Siemens 840D Very Good No 16.92" Swing, 11.42" SOC, 8.66" Max. Cut Dia., 18.99" Max. Cut Length, 8,000 RPM, 2 - 12 Sta. Turrets, 17 HP Main, 13 HP Sub., 16C Collet Chuck on Main and Sub Spindle, Coolant Through Sub-Spindle, Parts Catcher, Bar Feed Interface, Live Tooling, LNS Quick Load Servo 2 Bar Feed, Parts Ejector on Sub-Spindle, Mist / Oil Collector, High Pressure Coolant, Live and Standard Tool Holders 2000 Emco Maier Emco-Turn 332 Siemens 840D L21254MS $60000.00 -1 Yes 16.92" 6.299" x 20.07" 8,000 1.25" 24 Swing Travels RPM Bar Cap. Stations
8521 LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 2001 Graziano Twin 70Y Fanuc 18iT Very Good Yes 2001 Graziano Twin 70Y Fanuc 18iT L21254MS $159900.00 0 Yes 18.9" 20.66" x 7.086" x 2.5" 5,000 2.5" 24 Swing Travels RPM Bar Cap. Stations
10425 LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 2000 Mori-Seiki ZL-200 SMC Mitsubishi MSC-501 (18iTA) Good Yes 26.8" Swing, 20.1" SOC, 16.7" Turning Length, 4,000 RPM, 20 HP, Sub-Spindle, Two Turrets, Live Tooling, Full C-Axis for Main and Sub-Spindle, Overhead in Machine Auto Parts Catcher, Chip Conveyor 2000 Mori-Seiki ZL-200 SMC Mitsubishi MSC-501 (18iTA) L21254MS $139500.00 0 Yes 26.77" 9.3" x 20.5" 4,000 2.56 20 Swing Travels RPM Bar Cap. Stations
9746 LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 2006 Mori-Seiki NT-3150 / 1000 SZ DCG Mori-Seiki MSX-711 T3 Very Good Yes 2006 Mori-Seiki NT-3150 / 1000 SZ DCG Mori-Seiki MSX-711 T3 L21254MS $275000.00 0 On Way 23.60" 27" x 42.3" 6,000 2" 40 Swing Travels RPM Bar Cap. Stations
10552 LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 2001 Nakamura-Tome WT-150 MMY Fanuc 18iT Very Good Yes Swing 10", Swing Over C.S. 7.48", Maximum Turning Diameter 7.48", Length 15.7", Y-Axis, 5,000 RPM, 14 HP, 2 - 12 Sta. Turrets, Sub Spindle, Full C-Axis, Collet Chuck Main Spindle, 6" 3-Jaw Sub Spindle, Chip Conveyor, Parts Catcher, LNS 550 Sprigazine Bar Feed, High Pressure Coolant 2001 Nakamura-Tome WT-150 MMY Fanuc 18iT L21254MS $279500.00 0 Yes 10" 6.2" x 18.3" 5,000 2.5" 12 / 12 Swing Travels RPM Bar Cap. Stations
10544 LATHES, CNC, 4-AXIS, W-SUB-SPINDLE 1996 Okuma LR-15 W OSP-5020L Good Yes 1996 Okuma LR-15 W OSP-5020L L21254S $28000.00 0 Yes 17.72" 8.5" x 23.62" 3,800 2.56" 10 / 8 Swing Travels RPM Bar Cap. Stations
10042 LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE 2005 Daewoo Puma-2000 SLYGL Fanuc 18iT Very Good Yes 2005 Daewoo Puma-2000 SLYGL Fanuc 18iT L21256MS $140000.00 0 Yes 23.622" 10" x 32.6" x 3.94" 4,500 2.625" 12 Swing Travels RPM Bar Cap. Stations
10612 LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE 2005 Doosan Puma MX-2500 ST Fanuc 18iTB Very Good Yes 2005 Doosan Puma MX-2500 ST Fanuc 18iTB L21256MS $179900.00 0 On Way 29.5" 21.85" x 43.1" x 6.3" 5,000 3.5" 40 ATC / 12 Swing Travels RPM Bar Cap. Stations
8890 LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE 1998 Mori-Seiki SL-250 B SMC / 1000 Mitsubishi MSC-501 (Fanuc 18T) Very Good Yes 1998 Mori-Seiki SL-250 B SMC / 1000 Mitsubishi MSC-501 (Fanuc 18T) L21256MS $64500.00 0 Yes 26.8" 9.3" x 39.37" 3,500 2.87" 12 Swing Travels RPM Bar Cap. Stations
9485 LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE 1995 Okuma LT-15 M OSP-7000L Very Good Yes 1995 Okuma LT-15 M OSP-7000L L21256MS $59500.00 0 Yes 21.65" 7.1" x 18.1" 3,800 2.75" 24 Swing Travels RPM Bar Cap. Stations
10451 LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE 1999 Okuma LT-15 M BB OSP U100L Very Good Yes 1999 Okuma LT-15 M BB OSP U100L L21256MS $89900.00 0 Yes 21.65" 7.56" x 27.56" x 6,000 1" 24 Swing Travels RPM Bar Cap. Stations
9664 LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE 1996 Okuma LT-15 M BB OSP-7000L Good Yes 1996 Okuma LT-15 M BB OSP-7000L L21256MS $62500.00 0 Yes 21.65" 7.56" x 27.56" 3,800 2.75" 24 Swing Travels RPM Bar Cap. Stations
8436 LATHES, CNC, GANG STYLE 1996 Amera-Seiki GT-32 Fanuc OTC Good Yes 14.3" Swing, 10.8" OCS, 4" Turning Dia., 11.8" Turn Length, 1.57" Spindle Bore, 10 HP, 12" x 20.8" Gang Slide, 16C Collet Closure 1996 Amera-Seiki GT-32 Fanuc OTC L2125G $18500.00 -1 Yes 14.3" 11.81" x 9.45" 6,000 1.26" Swing Travels RPM Bar Cap. Stations
7297 LATHES, CNC, GANG STYLE 1997 Mazak Quick Turn-6G Good Yes 1997 Mazak Quick Turn-6G l2125g $26000.00 -1 Yes 18.5" 11.81" x 9.45" 7,000 1.26" 6 Swing Travels RPM Bar Cap. Stations
8694 LATHES, CNC, GANG STYLE 1999 Wasino G-6 Fanuc 21iT Good Yes 15.75" Swing, 6,000 RPM, 5.5 HP, 8 Sta. Slide, Tailstock, 5C Collet Chuck, Intergrated Robot Load / Unload Gantry System, Tool Setter, Parts Stacker 1999 Wasino G-6 Fanuc 21iT L2125G $26000.00 -1 Yes 15.75" 11.81" x 11.25" 6,000 1.5" 8 Swing Travels RPM Bar Cap. Stations
10318 LATHES, CNC, OPPOSING SPINDLES W-MILLING 1995 Mazak Multiplex 630 M Mazatrol T-Plus Very Good Yes 1995 Mazak Multiplex 630 M Mazatrol T-Plus L2125TM $89500.00 0 Yes 22.04" 12.20" x 23.80" 3,500 2" 24 Swing Travels RPM Bar Cap. Stations
9795 LATHES, CNC, OPPOSING SPINDLES W-MILLING 1996 Okuma LT-25 OSP-7000L Good Yes 1996 Okuma LT-25 OSP-7000L L2125TM $62500.00 0 Yes 19.67" 10.24" x 22.05" 3,500 2.75" 24 Swing Travels RPM Bar Cap. Stations
10371 LATHES, ENGINE 1968 American Maxi-Swing 70/50 Good Yes 1968 American Maxi-Swing 70/50 L3000 $159500.00 0 Yes 74.5" 239" 250 2 7/8" Yes Swing Centers RPM Bar Cap. Threading
10171 LATHES, ENGINE 1987 American 64" x 498" Good Yes 1987 American 64" x 498" L3000 $132500.00 0 Yes 64" 498" 157 2 1/2" Yes Swing Centers RPM Bar Cap. Threading
10198 LATHES, ENGINE 1953 American 64" x 498" Good Yes 1953 American 64" x 498" L3000 $129500.00 0 Yes 64" 498" 157 2 1/2" Yes Swing Centers RPM Bar Cap. Threading
7590 LATHES, ENGINE American 44" x 276" Good Yes American 44" x 276" L3000 $32000.00 0 Yes 44.5" 56" 157 Yes Swing Centers RPM Bar Cap. Threading
9870 LATHES, ENGINE American 44" x 156" Good Yes American 44" x 156" L3000 $24500.00 0 Yes 44" 156" 260 2 7/8" Yes Swing Centers RPM Bar Cap. Threading
9189 LATHES, ENGINE Axelson 18" x 30" Very Good Yes Axelson 18" x 30" L3000 $8600.00 0 Yes 18.5" 30" 1,127 1 9/16" Yes Swing Centers RPM Bar Cap. Threading
10199 LATHES, ENGINE Bertram 75" x 360" Good Yes Bertram 75" x 360" L3000 $149500.00 0 Yes 75" 360" 101 1 3/4" Yes Swing Centers RPM Bar Cap. Threading
9879 LATHES, ENGINE Betts 84"x 156" Very Good Yes Betts 84"x 156" L3000 $59500.00 0 Yes 86" 156" 63 2 1/2" No Swing Centers RPM Bar Cap. Threading
9165 LATHES, ENGINE 1964 Cincinnati 19" x 30" Good Yes 1964 Cincinnati 19" x 30" L3000 $5950.00 0 Yes 19" 30" 1,500 1 5/8" Yes Swing Centers RPM Bar Cap. Threading
7383 LATHES, ENGINE 1996 Clausing-Colchester Mastiff GH Very Good Yes 1996 Clausing-Colchester Mastiff GH L3000 $21500.00 0 Yes 21.8" 80" 1,400 3 1/2" Yes Swing Centers RPM Bar Cap. Threading
10290 LATHES, ENGINE 1979 Clausing-Colchester 21" x 120" 8100 Good Yes 21" Swg, 35" Swg. In Gap, 100" Centers, 1,400 RPM, 15 HP, 3 & 4 Jaw Chucks, Taper Attachement, Many Extras 1979 Clausing-Colchester 21" x 120" 8100 L3000 $16500.00 -1 Yes 21" 120" 1,400 3 1/2" Yes Swing Centers RPM Bar Cap. Threading
9161 LATHES, ENGINE 1987 Clausing-Colchester 15" x 50" Good Yes 1987 Clausing-Colchester 15" x 50" L3000 $5950.00 0 Yes 15" 50" 2,000 1 3/4" No Swing Centers RPM Bar Cap. Threading
7430 LATHES, ENGINE 1952 Clovis 43" x 240" Good Yes 1952 Clovis 43" x 240" L3000 $24500.00 0 Yes 43" 240" 520 3.5" Yes Swing Centers RPM Bar Cap. Threading
7980 LATHES, ENGINE Craven 112" x 312" Good Yes Craven 112" x 312" L3000 $225000.00 0 Yes 112" 312" 36 1 3/4" No Swing Centers RPM Bar Cap. Threading
10570 MACHINING CENTERS, VERTICAL, CNC 2000 Haas VF-3 Haas 32 BIT Very Good Yes 2000 Haas VF-3 Haas 32 BIT M0185 $42500.00 0 Yes 48" x 18" 40" x 20" x 25" 7,500 40 21 Table Travels RPM Taper ATC
10578 MACHINING CENTERS, VERTICAL, CNC 2003 Haas VF-6/40 Haas 32 BIT Very Good Yes 2003 Haas VF-6/40 Haas 32 BIT M0185 $89500.00 0 Yes 64" x 38" 64" x 32" x 30" 10,000 40 24 Table Travels RPM Taper ATC
10591 MACHINING CENTERS, VERTICAL, CNC 2005 Haas VF-5/40 Haas 32 BIT Very Good Yes 2005 Haas VF-5/40 Haas 32 BIT M0185 $89900.00 0 Yes 52" x 23" 50" x 26" x 25" 10,000 40 40 Table Travels RPM Taper ATC
10619 MACHINING CENTERS, VERTICAL, CNC 2005 Haas VF-1 Haas 32 BIT Very Good Yes 2005 Haas VF-1 Haas 32 BIT M0185 $52000.00 0 Yes 26" x 14" 20" x 16" x 20" 7,500 40 20 Table Travels RPM Taper ATC
9039 MACHINING CENTERS, VERTICAL, CNC 2003 Haas VF-4 Haas 32 BIT Good Yes 2003 Haas VF-4 Haas 32 BIT M0185 $48900.00 0 Yes 52" x 18" 50" x 20" x 25" 7,500 40 25 Table Travels RPM Taper ATC
10590 MACHINING CENTERS, VERTICAL, CNC 2003 Haas Mini-Mill Haas 32 BIT Very Good Yes 2003 Haas Mini-Mill Haas 32 BIT M0185 $23500.00 0 Yes 28.75" x 12" 16" x 12" x 10" 6,000 40 10 Table Travels RPM Taper ATC
9061 MACHINING CENTERS, VERTICAL, CNC 2001 Haas VF-4 Haas 32 BIT Very Good Yes 52" x 18" Table, 50" x 20" x 25" Travels, 7,500 RPM, 20 HP, 24 ATC, 4th Axis Interface, Remote Jog Handle, 3.5" Floppy Drive, Programmable Coolant, Remote Jog Handle, 1 MB Memory, Spindle Orientation, Coordinate Rotation and Scaling 2001 Haas VF-4 Haas 32 BIT M0185 $39900.00 0 Yes 52" x 18" 50" x 20" x 25" 7,500 40 21 Table Travels RPM Taper ATC
10600 MACHINING CENTERS, VERTICAL, CNC 2004 Haas TM-2 Haas 32 BIT Very Good Yes 2004 Haas TM-2 Haas 32 BIT M0185 $29500.00 0 Yes 57.75" x 10.5" 40" x 16" x 16" 4,000 40 10 Table Travels RPM Taper ATC
10540 MACHINING CENTERS, VERTICAL, CNC 2005 Haas VF-3 SS YT Haas 32 BIT Very Good Yes 54" x 25" Table, 40" x 26" x 25" Travels, 12,000 RPM, 40 Tpaer 30 HP, 24 ATC, 1,400 IPM, Chip Auger, Programmable Coolant Nozzle, 4th Axis Ready, 16MB Expanded Memory, Visual Quick Code, High Speed Machining Look Ahead, Coolant Through Spindle (300 psi) With Auxiliary Coolant Filter System, Renishaw Wireless Intuitive Probing and Toolpresetting System, Remote Jog Handle 2005 Haas VF-3 SS YT Haas 32 BIT M0185 $84500.00 0 Yes 54" x 25" 40" x 26" x 25" 12,000 40 24 Table Travels RPM Taper ATC
10322 MACHINING CENTERS, VERTICAL, CNC 2006 Hardinge VMC-1000XP-3 Fanuc 18iMB Exceelent Yes 2006 Hardinge VMC-1000XP-3 Fanuc 18iMB M0185 $95000.00 0 Yes 47" x 24" 40" x 24" x 24" 12,000 40 30 Table Travels RPM Taper ATC
10242 MACHINING CENTERS, VERTICAL, CNC 2004 Hardinge VMC-1000 II Fanuc OMD Very Good Yes 2004 Hardinge VMC-1000 II Fanuc OMD M0185 $42000.00 0 Yes 44" x 20" 40.16" x 20.08" x 20.08" 8,000 40 20 Table Travels RPM Taper ATC
10243 MACHINING CENTERS, VERTICAL, CNC 2000 Hardinge VMC-1000 II Fanuc OMD Very Good Yes 2000 Hardinge VMC-1000 II Fanuc OMD M0185 $29500.00 0 Yes 44" x 20" 40.16" x 20.08" x 20.08" 8,000 40 20 Table Travels RPM Taper ATC
10244 MACHINING CENTERS, VERTICAL, CNC 1998 Hardinge VMC-1000 Fanuc OMD Very Good Yes 1998 Hardinge VMC-1000 Fanuc OMD M0185 $29500.00 0 Yes 44" x 20" 40.16" x 20.08" x 20.08" 8,000 40 20 Table Travels RPM Taper ATC
9434 MACHINING CENTERS, VERTICAL, CNC 2001 Hurco VMX-50 Ultramax IV/Dual CRT Very Good Yes 59" x 26" Table, 50" x 26" x 24" Travels, 12,000 RPM's, 50 Taper, 30 HP, 30 ATC, Conversational Programming, Dual Screen Control, Chip Conveyor 2001 Hurco VMX-50 Ultramax IV/Dual CRT M0185 $59900.00 -1 Yes 59" x 26" 50" x 26" x 24" 12,000 50 30 Table Travels RPM Taper ATC
10164 MACHINING CENTERS, VERTICAL, CNC 1993 Hurco Spirit 40 SLV Fidia PC Base Good Yes 47.2" x 19.7" Table, 6,000 RPM, 15 HP, 24 ATC, Linear Guides, Full Enclosure 1993 Hurco Spirit 40 SLV Fidia PC Base M0185 $12000.00 -1 Yes 47.2" x 19.7" 40" x 20" x 25" 6,000 40 24 Table Travels RPM Taper ATC
9435 MACHINING CENTERS, VERTICAL, CNC 1998 Hurco BMC-4020 HT Ultramax SSM Very Good Yes 47" x 19.7" Table, 40" x 20" x 24" Travels, 8,000 RPM's, 40 Taper, 20 HP, 24 ATC, Rigid Tapping, RS-232 Port 1998 Hurco BMC-4020 HT Ultramax SSM M0185 $32000.00 -1 Yes 47" x 19.7" 40" x 20" x 24" 8,000 40 24 Table Travels RPM Taper ATC
10114 MACHINING CENTERS, VERTICAL, CNC 1994 Hurco BMC-30 Delta Dynapath 10 Very Good Yes 47.2" x 25.2" Table, 30" x 18" x 20" Travels, 8,000 RPM, 40 Taper, 15 HP, 24 ATC, RS-232 Port, 3D Eprom Software, Coolant System, Rigid Tapping 1994 Hurco BMC-30 Delta Dynapath 10 M0185 $32500.00 -1 Yes 47.2" x 25.2" 30" x 18" x 20" 8,000 40 24 Table Travels RPM Taper ATC
9809 MACHINING CENTERS, VERTICAL, CNC 1994 Hurco BMC-30 Ultramax II/Dual CRT Needs Repair Yes 1994 Hurco BMC-30 Ultramax II/Dual CRT M0185 $16500.00 -1 Yes 47.2" x 25.2" 30" x 20" x 20" 8,000 40 24 Table Travels RPM Taper ATC
9151 MACHINING CENTERS, VERTICAL, CNC 1991 Ikegai TV-4 Fanuc OM Good Yes 1991 Ikegai TV-4 Fanuc OM M0185 $12000.00 -1 Yes 27.5" x 16.5" 22" x 16.125" x 15.75" 6,000 40 20 Table Travels RPM Taper ATC
10611 MACHINING CENTERS, VERTICAL, CNC 1997 Johnford VMC-2024 Fanuc OM Very Good Yes 1997 Johnford VMC-2024 Fanuc OM M0185 $69500.00 0 Yes 82.9" x 34" 80.7" x 35.4" x 28" 6,000 40 24 Table Travels RPM Taper ATC
10025 MACHINING CENTERS, VERTICAL, CNC 1996 Johnford VMC-2020 Fanuc OM Good Yes 1996 Johnford VMC-2020 Fanuc OM M0185 $79500.00 0 Yes 82.9" x 34" 80.7" x 35.4" x 28" 6,000 50 20 Table Travels RPM Taper ATC
10547 MACHINING CENTERS, VERTICAL, CNC 1990 Kia VA-50 Fanuc 10M Very Good Yes 1990 Kia VA-50 Fanuc 10M M0185 $33000.00 0 Yes 62" x 19.5" 40" x 20" x 20" 3,700 50 25 Table Travels RPM Taper ATC
7618 MACHINING CENTERS, VERTICAL, CNC 2001 Kingsbury VMC-600 Fanuc 15iM Good Yes 2001 Kingsbury VMC-600 Fanuc 15iM M0185 $72000.00 0 Yes 60" x 52" 60" x 50" x 18" 8,000 50 30 Table Travels RPM Taper ATC
10445 MACHINING CENTERS, VERTICAL, CNC 1998 Kitamura Bridge Center 8 Fanuc 15M Good Yes 1998 Kitamura Bridge Center 8 Fanuc 15M M0185 $139500.00 0 Yes 98.4" x 35.4" 80" x 42.7" x 27.9" 6,000 50 30 Table Travels RPM Taper ATC
9807 MACHINING CENTERS, VERTICAL, CNC 1989 Kitamura Mycenter-2 Fanuc OM Good Yes 1989 Kitamura Mycenter-2 Fanuc OM M0185 -1 Yes 35.4" x 16.1" 23" x 16.9" x 18" 7,000 40 20 Table Travels RPM Taper ATC
7619 MACHINING CENTERS, VERTICAL, CNC 1998 Kitamura Mycenter-7X / 50 Yasnac I80 Good Yes 1998 Kitamura Mycenter-7X / 50 Yasnac I80 M0185 $119750.00 0 Yes 66.9" x 25.6" 60.2" x 25.6" x 27" 5,000 50 30 Table Travels RPM Taper ATC
9808 MACHINING CENTERS, VERTICAL, CNC 1992 Kitamura Mycenter-3 APC Yasnac I80M Good Yes 1992 Kitamura Mycenter-3 APC Yasnac I80M M0185 $17500.00 -1 Yes 39.37" x 15.6" 32.90" x 18.70" x 18" 6,000 40 60 Table Travels RPM Taper ATC
10219 MACHINING CENTERS, VERTICAL, CNC 1999 Komo VMC-40/240 Fanuc 16MB Very Good Yes 1999 Komo VMC-40/240 Fanuc 16MB M0185 $175000.00 -1 On Way 280" x 24" 242" x 24" x 24" 10,000 40 47 Table Travels RPM Taper ATC
9015 MACHINING CENTERS, VERTICAL, CNC 1998 Leblond-Makino SNC-64 Fanuc Pro 3 CNC Very Good Yes 29.5" x 15.7" Table, 15,000 RPM, 40 Taper, 7.5 HP, 15 ATC, Graphite Package 1998 Leblond-Makino SNC-64 Fanuc Pro 3 CNC M0185 $29500.00 0 Yes 29.5" x 15.7" 23.622" x 15.748" x 15.748" 15,000 40 16 Table Travels RPM Taper ATC
9415 MACHINING CENTERS, VERTICAL, CNC 1993 Leblond-Makino SNC-64 Fanuc Pro 3 CNC Good Yes 1993 Leblond-Makino SNC-64 Fanuc Pro 3 CNC M0185 -1 On Way 29.5" x 15.7" 23.622" x 15.748" x 15.748" 15,000 40 15 Table Travels RPM Taper ATC
10615 MACHINING CENTERS, VERTICAL, CNC 2005 Makino V56 Makino Pro 5 Excellent Yes 2005 Makino V56 Makino Pro 5 M0185 $179500.00 0 Yes 41.3" x 21.6" 35.4" x 21.7" x 17.7" 30,000 HSK 63 25 Table Travels RPM Taper ATC
9721 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 1985 Okamoto PSG-208B Very Good 1985 Okamoto PSG-208B G8025 $57500.00 0 Yes 32" x 80" 29" 84.64" x 32.67" 20" 30 Table U/W Travels Grind Wheel HP
8854 GRINDERS, SURFACE, ROTARY TYPE, HORIZ. SPDL Arter A3-16 Good Yes Arter A3-16 G8080 $6800.00 0 Yes 1 Chuck Diameter Under Wheel Wheel RPM HP
8868 GRINDERS, SURFACE, ROTARY TYPE, HORIZ. SPDL 1953 Arter D-16 Good Yes 1953 Arter D-16 G8080 $6500.00 0 Yes 1 Chuck Diameter Under Wheel Wheel RPM HP
8853 GRINDERS, SURFACE, ROTARY TYPE, HORIZ. SPDL 1967 Sundstrand Model H Good Yes 1967 Sundstrand Model H G8080 $18000.00 0 Yes 1 Chuck Diameter Under Wheel Wheel RPM HP
8666 GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL Blanchard 20-36 Good Yes Blanchard 20-36 G8100 $14500.00 0 Yes 1 Table Swing U/W Grind Wheel HP
8670 GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL Blanchard 18 Good Yes Blanchard 18 G8100 $17500.00 0 Yes 1 Table Swing U/W Grind Wheel HP
7060 GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL 1967 Blanchard 22K-42 Very Good Yes 1967 Blanchard 22K-42 G8100 $36550.00 0 Yes 1 Table Swing U/W Grind Wheel HP
8671 GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL Blanchard 18-36 Good Yes Blanchard 18-36 G8100 $12500.00 0 Yes 1 Table Swing U/W Grind Wheel HP
9937 GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL 1954 Blanchard 20K-36 Good Yes 36" Chuck, 38" Swing, 12 Under Wheel, 20" Grinding Wheel, 36" Neutrifier Magnetic Chuck Control, Coolant System, Splash Guards 1954 Blanchard 20K-36 G8100 $18000.00 -1 Yes 1 Table Swing U/W Grind Wheel HP
9679 GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL Blanchard 18-36 Very Good Yes Blanchard 18-36 G8100 0 Yes 36" 39" 20" 18" 25 Table Swing U/W Grind Wheel HP
8667 GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL 1988 Elgin 36 Good Yes 1988 Elgin 36 G8100 $17500.00 0 Yes 1 Table Swing U/W Grind Wheel HP
8680 GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL Lansing 32" Like New Yes Lansing 32" G8100 $38000.00 0 Yes 1 Table Swing U/W Grind Wheel HP
10159 GRINDERS, TOOL and CUTTER, NC-CNC 2004 Anca RGX Anca 3DX-NT Very Good Yes Max. Tool Dia. / Length - 9.8" / 6", Travels - 15" x 15.4" x 15.4" x 9.449", A-Axis Length / Rotation / Taper - 5.9" / 180° / ISO 30, C-Axis - +/- 270°, 20,000 RPM, 11 HP, Color Monitor with Graphics, Ethernet Port, Dual Bi-Directional Spindles, Very Large Software Package, Forty (40) Tool Auto Loader, Approximately One Hundred Seventy Five (175) Collets For Auto Loader 2004 Anca RGX Anca 3DX-NT G8507 $72000.00 0 Yes 1 Dia. Length Travels RPM HP
8841 GRINDERS, TOOL and CUTTER, NC-CNC 1998 Anca RG-7 Anca System 32 Very Good Yes Min. - Max. Tool Dia. / Length - .079 - 6" / 13", Travels - 13.386" x 9.449" x 9.449" x 9.449", A-Axis Length / Rotation / Taper - 5.9" / 360° / ISO 50, Hoffman 600 CFM Mist Collector, PROjection Fluting, Large Selection of Tooling Including Mandrels, Collets, Wheels, Etc, Step Tool Package, Many Other Options, Machine Rebuilt by Anca in 2004, Not Used Since 1998 Anca RG-7 Anca System 32 G8507 $86000.00 -1 Yes 1 Dia. Length Travels RPM HP
8164 GRINDERS, TOOL and CUTTER, NC-CNC 1994 Anca TG-4 Fastgrind Anca Series 2000 Good Yes Max. Swing 3.15", Max. Length 15.86", 5,167 Spindle, Anca Series 2000 Control, Paper Coolant Filtration System, RS-232 Port, One (1) 50 Taper Holder with 1/8 - 1" Collets, Two (2) Wheel Arbors, Operating Only With Oil, High End Production End Mill Software (all end mills, conical taper, wordriff) 1994 Anca TG-4 Fastgrind Anca Series 2000 G8507 $42000.00 -1 Yes 1 Dia. Length Travels RPM HP
8908 GRINDERS, TOOL and CUTTER, NC-CNC 1999 Sentry TG-410 Autocon CNC Very Good Yes 1999 Sentry TG-410 Autocon CNC G8507 $40000.00 -1 On Way 1 Dia. Length Travels RPM HP
8906 GRINDERS, TOOL and CUTTER, NC-CNC 2005 Star PTG-512 Very Good Yes Max. Tool Dia. / Length - .3.937" / 21", Travels - 11.8" x 8.7" x 22", A-Axis Rotation / Taper - 360° / ISO 50, 10,000 RPM, 30 HP, NUMROTOplus Part Probing Software, NUMROTOplus 2D Grinding Simulation, Closed Loop Chiller on Grinding Spindle & Headstock, Glass Scales on All Linear Axes, HSK Wheel Mounting - Too Many Option To List - Check Out The Full Quote 2005 Star PTG-512 G8507 $285000.00 -1 Yes 1 Dia. Length Travels RPM HP
7280 GRINDERS, TOOL and CUTTER, NC-CNC 1990 Star ATG-6DC Very Good Yes 1990 Star ATG-6DC G8507 $19500.00 -1 1 Dia. Length Travels RPM HP
5967 GRINDERS, TOOL and CUTTER, NC-CNC 1996 Unison 4000 Super TruFlute Good No Max. Swing 14", Max. Length 12", 14" x 8" x 13.5" Travels, 10 HP, A & C Axis, Operating Only With Oil, Drill, End Mill, Step Tool and Burr Software, New Spindle Installed 10/13/06 1996 Unison 4000 Super TruFlute G8507 $48000.00 -1 Yes 1 Dia. Length Travels RPM HP
7711 GRINDERS, TOOL and CUTTER, NC-CNC 1997 Walter Power Production Walter HMC 400 Good Yes Maximum Tool Diameter / Length - 12.59" / 14.46", Walter HMC 400 Control, Windows DOS Packages 1, Two (2) Wheel Arbors, Operating Only With Oil, Fire Supression Equipment 1997 Walter Power Production Walter HMC 400 G8507 $70000.00 -1 Yes 1 Dia. Length Travels RPM HP
10196 GRINDERS, TOOL and CUTTER, NC-CNC 1993 Walter Helitronic 44 Walter HMC 300 Good Yes 1993 Walter Helitronic 44 Walter HMC 300 G8507 $24500.00 0 Yes 1 Dia. Length Travels RPM HP
9873 GRINDERS, TOOL and CUTTER, NC-CNC 1997 Walter Helitronic Power Walter HMC 400 Very Good Yes 1997 Walter Helitronic Power Walter HMC 400 G8507 $59900.00 0 Yes 1 Dia. Length Travels RPM HP
7883 GRINDERS, TOOL and CUTTER, NC-CNC 1996 Walter Helitronic Power Walter HMC 400 Good Yes Maximum Tool Diameter / Length - 10.25" / 15.75", Walter HMC 400 Control, Walter HMC 400, Software Pack (1, 2, 3, and 4), Operating Only With Oil, Tailstock 1996 Walter Helitronic Power Walter HMC 400 G8507 $82000.00 -1 Yes 1 Dia. Length Travels RPM HP
7882 GRINDERS, TOOL and CUTTER, NC-CNC 1996 Walter Helitronic Power Walter HMC 400 Fair Yes Maximum Tool Diameter / Length - 10.25" / 15.75", Walter HMC 400 Control, Walter HMC 400, Software Pack (1, 2, 3, and 4), Operating Only With Oil, Tailstock 1996 Walter Helitronic Power Walter HMC 400 G8507 $82000.00 -1 Yes 1 Dia. Length Travels RPM HP
9304 INSERTION MACHINES 1992 Haeger HP6-C Good Yes 1992 Haeger HP6-C I4775 $7000.00 0 Yes 1 Tons Throat Stroke Daylight HP
8130 IRONWORKERS 1954 Buffalo Model 2 1/2 Good Yes 1954 Buffalo Model 2 1/2 P8915 $10500.00 0 Yes 125 1 13/16" 6" x 6 x 1/2" 1 9/16" 10 Tons Punch Shear Bar HP
8286 IRONWORKERS 2009 Lansing IW-55A New Yes 2009 Lansing IW-55A P8915 $12500.00 0 Yes 55 3/4" 14" x 7/16" 1 1/4" 3 Tons Punch Shear Bar HP
8434 IRONWORKERS Mubea KBL 2.5 Good Yes Mubea KBL 2.5 P8915 $7500.00 0 Yes 104 13/16" 6 5/8" 2" 7 Tons Punch Shear Bar HP
9765 IRONWORKERS Peddinghaus 210 Super 13 Very Good Yes Peddinghaus 210 Super 13 P8915 $8000.00 -1 Yes 65 1 1/16" 8" x 1/2" 1 5/8" 5 Tons Punch Shear Bar HP
9076 IRONWORKERS 2003 Piranha P-50 Very Good Yes 50 Tons, 60 SPM, 3/4" Punch Cap., 5" x 5 x 3/8"Angle Shear Cap., 15" x 5/8" Flat Shear Cap., 1/4" - 1 1/2" Round Bar Cap., 1/2" - 1" Square Bar Cap., Four (4) Way Press Brake Dies Set, Punch With Dies 2003 Piranha P-50 P8915 $8450.00 0 Yes 50 13/16" 15" x 5/8" 1 1/2" 10 Tons Punch Shear Bar HP
10626 IRONWORKERS 2001 Scotchman 4014 Excellent No 2001 Scotchman 4014 P8915 $6800.00 -1 Yes 40 1" 6" x 1/2" 2" 3 Tons Punch Shear Bar HP
9351 IRONWORKERS Uni-Hydro 120-24 Good Yes Uni-Hydro 120-24 P8915 $8950.00 0 Yes 120 1 1/2" 24" x 1/2" 1" 7.5 Tons Punch Shear Bar HP
10178 JIG BORERS, NC and CNC 1992/2002 Sip 740 Fanuc 11MF Excellent Yes 1992/2002 Sip 740 Fanuc 11MF J5100 $380000.00 -1 Yes 1 Table Spindle Dia. RPM HP Travels
9825 KEYSEATER Mitts and Merrill Model 7B Allen Bradley Very Good Yes Mitts and Merrill Model 7B Allen Bradley K3004 $48900.00 -1 Yes 1 Width Length Table Cut FPM HP
9100 KEYSEATER 1942 Morton 30" Good Yes 1942 Morton 30" K3004 $6500.00 0 Yes 1 Width Length Table Cut FPM HP
7631 LAPPING MACHINES 1995 Speedfam BTAW-24 Good Yes 1995 Speedfam BTAW-24 L0754 $11500.00 0 Yes 1 Style Max. Part Max Plate HP
8927 LASERS 1996 Amada Pulsar LC1212XL Fanuc 16L Good Yes 1996 Amada Pulsar LC1212XL Fanuc 16L L0850 $39500.00 0 Yes 1 Table Table Load Travels Watts Cut Rate
9481 LASERS 2006 BLM Adige Lasertube Model LT72D Siemens 840D Very Good Yes 2006 BLM Adige Lasertube Model LT72D Siemens 840D L0850 $599500.00 0 Yes 1 Table Table Load Travels Watts Cut Rate
8525 LASERS 2003 BLM Adige Lasertube Model LT70D Siemens 840D Very Good Yes 2003 BLM Adige Lasertube Model LT70D Siemens 840D L0850 $415000.00 0 Yes 1 Table Table Load Travels Watts Cut Rate
9002 LASERS 1991 Cincinnati CL5-350 Fanuc Good No 1991 Cincinnati CL5-350 Fanuc L0850 $40000.00 -1 On Way 1 Table Table Load Travels Watts Cut Rate
9490 LASERS 2006 Mazak Fabri Gear 150 3D Mazak Very Good Yes 2006 Mazak Fabri Gear 150 3D Mazak L0850 $779500.00 0 Yes 1 Table Table Load Travels Watts Cut Rate
9482 LASERS 2005/2007 Trumpf Tubematic RC Siemens 840D Very Good Yes 2005/2007 Trumpf Tubematic RC Siemens 840D L0850 $595000.00 0 Yes 1 Table Table Load Travels Watts Cut Rate
9845 LATHES, CNC, 2-AXIS, CHUCKER 1996 Daewoo Puma-V-10 Fanuc OT Good Yes 1996 Daewoo Puma-V-10 Fanuc OT L2125 -1 Yes 18.5" 15.4" x 13" 3,600 1.75" 8 Swing Travels RPM Bar Cap. Stations
9846 LATHES, CNC, 2-AXIS, CHUCKER 1996 Daewoo Puma-V-10 Fanuc OT Need Minor Repairs Yes 1996 Daewoo Puma-V-10 Fanuc OT L2125 -1 Yes 18.5" 15.4" x 13" 2,000 1.75" 8 Swing Travels RPM Bar Cap. Stations
9894 LATHES, CNC, 2-AXIS, CHUCKER 2000 Daewoo Puma-V-300 G Good Yes 2000 Daewoo Puma-V-300 G L2125 -1 Yes 18.5" 15.4" x 13" 2,000 1.75" 8 Swing Travels RPM Bar Cap. Stations
10584 LATHES, CNC, 2-AXIS, CHUCKER 2006 Doosan Puma-V-850 Fanuc 18iT Very Good Yes 2006 Doosan Puma-V-850 Fanuc 18iT L2125 $325000.00 0 Yes 39.37" 17.5" x 36.5" 1,800 4.33" 12 + 12 Swing Travels RPM Bar Cap. Stations
10526 LATHES, CNC, 2-AXIS, CHUCKER 2007 Doosan Lynx-220A Fanuc 0iTE Very Good Yes 2007 Doosan Lynx-220A Fanuc 0iTE L2125 $64500.00 0 Yes 20.1" 6.3" x 20.9" 6,000 1.75" 12 Swing Travels RPM Bar Cap. Stations
10011 LATHES, CNC, 2-AXIS, CHUCKER 1999 Haas SL-20 Haas 32 BIT Very Good Yes 1999 Haas SL-20 Haas 32 BIT L2125 $29900.00 0 Yes 23" 8.45" x 20" 4,000 2.06" 10 Swing Travels RPM Bar Cap. Stations
9427 LATHES, CNC, 2-AXIS, CHUCKER 2008 Haas SL-20 BB APL Haas 32 BIT Like New Yes 2008 Haas SL-20 BB APL Haas 32 BIT L2125 $92500.00 0 Yes 23" 8.45" x 20" 3,400 2.5" 10 Swing Travels RPM Bar Cap. Stations
7666 LATHES, CNC, 2-AXIS, CHUCKER 2000 Hardinge Cobra-65 Fanuc 21iT Good Yes 2000 Hardinge Cobra-65 Fanuc 21iT L2125 $29900.00 0 Yes 21.3" 8.45" x 20" 4,500 2.5" 12 Swing Travels RPM Bar Cap. Stations
10351 LATHES, CNC, 2-AXIS, CHUCKER 1992 Mazak Quick Turn-15N Mazatrol T-32-2 Good Yes 1992 Mazak Quick Turn-15N Mazatrol T-32-2 L2125 $17500.00 0 Yes 17.32" 7.09" x 20.08" 4,500 1.96" 8 Swing Travels RPM Bar Cap. Stations
9987 LATHES, CNC, 2-AXIS, CHUCKER 1998 Mazak Quick Turn-40N Mazatrol T-Plus Good Yes 1998 Mazak Quick Turn-40N Mazatrol T-Plus L2125 $62000.00 -1 On Way 20.08" 9.3" x 40" 3,000 2.75" 12 Swing Travels RPM Bar Cap. Stations
10332 LATHES, CNC, 2-AXIS, CHUCKER 1998 Mazak Powermaster 1100 Mazatrol T-Plus Very Good Yes 1998 Mazak Powermaster 1100 Mazatrol T-Plus L2125 $199500.00 0 Yes 36" 24 1/2" x 44" 500 12.5" 8 Swing Travels RPM Bar Cap. Stations
10386 LATHES, CNC, 2-AXIS, CHUCKER 1980 Mazak Powermaster 1100 Fanuc 5T Good Yes 33" Swing, 37" Swing In Gap, 16.5" Length of Gap, 27" Swing OCS, 25" Turning Length, 1,200 RPM, 9.5" Spindle Bore and Bar Capacity,, 60 HP, 8 Station Turret, 21" x 29" Travels, 24" 3-Jaw Manual Chuck, Turret Tooling, Chip Conveyor, Tape Reader 1980 Mazak Powermaster 1100 Fanuc 5T L2125 $69900.00 -1 Yes 33" 21" x 29" 1,200 9.5" 8 Swing Travels RPM Bar Cap. Stations
9365 LATHES, CNC, 2-AXIS, CHUCKER 1981/2006 Mazak Powermaster 1600 Fanuc 18iT Rebuilt Yes 1981/2006 Mazak Powermaster 1600 Fanuc 18iT L2125 $165500.00 0 Yes 42" 22.5" x 44.88" 500 12.5" 8 Swing Travels RPM Bar Cap. Stations
9364 LATHES, CNC, 2-AXIS, CHUCKER 1981 Mazak Powermaster 1600 Fanuc 6T Very Good Yes 1981 Mazak Powermaster 1600 Fanuc 6T L2125 $69500.00 0 Yes 42" 22.5" x 44.88" 500 9" 8 Swing Travels RPM Bar Cap. Stations
9741 LATHES, CNC, 2-AXIS, CHUCKER 1997 Mazak Slant Turn-30 Mazatrol T-Plus Very Good Yes 21.25" Swing, 12.99" OCS, 63" Centers, 3,000 RPM, 3.15" Bore, 30 HP, 12 Station Turret, Tailstock, 10" 3-Jaw Chuck, RS-232 Port, Miscellaneous Tooling 1997 Mazak Slant Turn-30 Mazatrol T-Plus L2125 $47900.00 -1 Yes 21.25" 12.99" x 52.7" 3,000 2.75" 12 Swing Travels RPM Bar Cap. Stations
10250 LATHES, CNC, 2-AXIS, CHUCKER 1992 Miyano BNC-34 Fanuc 0T Very Good Yes 10.5" Swing, 4 1/16" Max. Turning Dia., 9" Turning Length, 5,000 RPM, 7.5 HP, 6 Sta. Turret, Tailstock, Parts Catcher, RS-232 Port, Tool Holders 1992 Miyano BNC-34 Fanuc 0T L2125 -1 On Way 10 1/2" 4" x 9 1/4" 5,000 1 1/4" 6 Swing Travels RPM Bar Cap. Stations
9966 LATHES, CNC, 2-AXIS, CHUCKER 1984 Mori-Seiki SL-8F Fanuc 6TB Very Good Yes 1984 Mori-Seiki SL-8F Fanuc 6TB L2125 $129500.00 0 Yes 51.1" 16.5" x 43.3" 143 8" 6 Swing Travels RPM Bar Cap. Stations
10288 LATHES, CNC, 2-AXIS, CHUCKER 1996 Mori-Seiki CL-25A Fanuc 21T Very Good Yes 1996 Mori-Seiki CL-25A Fanuc 21T L2125 -1 On Way 20.5" 10.2" x 19.7" 3,000 2.6" 10 Swing Travels RPM Bar Cap. Stations
10605 LATHES, CNC, 2-AXIS, CHUCKER 1982 Mori-Seiki SL-6B Fanuc 6TB Very Good Yes 1982 Mori-Seiki SL-6B Fanuc 6TB L2125 $144500.00 0 Yes 27.56" 13.77" x 33.86" 1,010 6.18" 12 Swing Travels RPM Bar Cap. Stations
8211 LATHES, CNC, 2-AXIS, CHUCKER 2000 Mori-Seiki CL-203B Mitsubishi MSG-803 Very Good Yes 2000 Mori-Seiki CL-203B Mitsubishi MSG-803 L2125 $39500.00 0 Yes 20.3" 9.25" x 12.2" 3,500 2.25" 10 Swing Travels RPM Bar Cap. Stations
10556 LATHES, CNC, 2-AXIS, CHUCKER 1998 Mori-Seiki CL-200B MSC-803L Fair Yes Swing Over Bed 20.3", Swing Over Saddle 9.5", Maximum Turning Diameter 16.14", Length 14.6", 4,500 RPM, 15 HP, 10 Sta. Turret, Tailstock, Parts Catcher, 8" 3-Jaw Chuck, Chip Conveyor, Iemca TAL 12' Bar Feed, Oil Mist Extraction Unit, Specialized 12’ Bar Carrier With Crane 1998 Mori-Seiki CL-200B MSC-803L L2125 $27500.00 0 Yes 20.3" 7.6" x 14.6" 3,500 2.55" 10 Swing Travels RPM Bar Cap. Stations
10273 LATHES, CNC, 2-AXIS, CHUCKER 1998 Mori-Seiki SL-80A Fanuc 16T Good Yes 1998 Mori-Seiki SL-80A Fanuc 16T L2125 $99500.00 0 Yes 39.4" 16.5" x 43.3" 750 8" 6 Swing Travels RPM Bar Cap. Stations
10166 LATHES, CNC, 2-AXIS, CHUCKER 1982/2003 Mori-Seiki SL-8F Fanuc OTC Very Good Yes 1982/2003 Mori-Seiki SL-8F Fanuc OTC L2125 $105000.00 0 Yes 51.1" 16.5" x 41.2" 143 8.5" 6 Swing Travels RPM Bar Cap. Stations
10133 LATHES, CNC, 2-AXIS, CHUCKER 1994 Mori-Seiki SL-35 B Fanuc 16T Needs Repair Yes 1994 Mori-Seiki SL-35 B Fanuc 16T L2125 $19500.00 -1 Yes 23.6" 9.4" x 33.7" 2,500 3.5" 10 Swing Travels RPM Bar Cap. Stations
9225 LATHES, CNC, 2-AXIS, CHUCKER 1999 Mori-Seiki CL-153 Mitsubishi MSG-803 Very Good Yes 1999 Mori-Seiki CL-153 Mitsubishi MSG-803 L2125 $27500.00 0 Yes 20.28" 9.25" x 12.2" 6,000 1.3" 10 Swing Travels RPM Bar Cap. Stations
7998 LATHES, CNC, 2-AXIS, CHUCKER 1982 Okuma LC-30 1C OSP-3000L Good Yes 19.69" Swing, 17.72" Turn Dia., 3,000 RPM, 40 HP, 12 Sta. Turret, Autoblok KNCS-NB 315-91 Quick Change Chuck, Miscellaneous Tool Holders, Chip Conveyor, Coolant System, Miscellaneous Spare Parts, RS-232 Port 1982 Okuma LC-30 1C OSP-3000L L2125 $8500.00 -1 Yes 19.69" 11.42" x 40.16" 3,000 2.5" 12 Swing Travels RPM Bar Cap. Stations
9056 LATHES, CNC, 2-AXIS, CHUCKER 1996 Okuma and Howa HL-20 Fanuc 18T Good No 1996 Okuma and Howa HL-20 Fanuc 18T L2125 $25000.00 -1 Yes 22" 7.1" x 18.1" 4,500 2.07" 8 Swing Travels RPM Bar Cap. Stations
9366 LATHES, CNC, 2-AXIS, CHUCKER 2010 Willis 5240-10 Fanuc OiTC New Yes 2010 Willis 5240-10 Fanuc OiTC L2125 $189000.00 0 Yes 52" 27" x 43" 550 10" 4 Swing Travels RPM Bar Cap. Stations
10402 LATHES, CNC, 2-AXIS, UNIVERSAL 2004 Amera-Seiki GR-2 Fanuc OTC Very Good No 2004 Amera-Seiki GR-2 Fanuc OTC L2150 -1 On Way 21.6" 9.1" x 21.6" 5,000 2" 12 Swing Travels RPM Bar Cap. Stations
10401 LATHES, CNC, 2-AXIS, UNIVERSAL 2004 Amera-Seiki GR-2 Fanuc OTC Very Good No 2004 Amera-Seiki GR-2 Fanuc OTC L2150 -1 On Way 21.6" 9.1" x 21.6" 5,000 2" 12 Swing Travels RPM Bar Cap. Stations
7702 LATHES, CNC, 2-AXIS, UNIVERSAL 2009 Amera-Seiki LT-50 / 120" Fanuc 0iTC New Yes 2009 Amera-Seiki LT-50 / 120" Fanuc 0iTC L2150 $457995.00 -1 Yes 50" 21" x 118" 600 8.5" 12 Swing Travels RPM Bar Cap. Stations
9878 LATHES, CNC, 2-AXIS, UNIVERSAL 1981 American 37" x 96" GE 2000 Very Good Yes 1981 American 37" x 96" GE 2000 L2150 $39500.00 0 Yes 37" 12.5" x 98" 675 6.25" 4 Swing Travels RPM Bar Cap. Stations
8705 LATHES, CNC, 2-AXIS, UNIVERSAL 2002 Birmingham Top-Turn 406 Fagor 8025 Very Good Yes 16" Swing, 34" Centers, 3,000 RPM, 7.5 HP, 4 Turret, Tailstock, 8" 3-Jaw Chuck, 10" 4-Jaw Chuck, 15” Face Plate, Two (2) Ball Bearing Steady Rests, Two (2) Speed Manual Tailstock, Bison Manual 5C Collets Chuck, Threading 2002 Birmingham Top-Turn 406 Fagor 8025 L2150 $14000.00 -1 Yes 16" 8 1/4" x 30" 3,000 2 1/4" 4 Swing Travels RPM Bar Cap. Stations
9592 LATHES, CNC, 2-AXIS, UNIVERSAL 1976/96 Cincinnati 18-C GE Fanuc 18TB Very Good Yes 30.5" Swing, 2,240 RPM, 50 HP, 22.5 x 34" Travels, 4" Bar Cap., 6 I.D. & 6 O.D. Turret, 18" 3-Jaw Hydraulic Chuck, Chip Conveyor, Programmable Swing-Down Tailstock,Pendant Control,Coolant, Hard and Soft Jaws 1976/96 Cincinnati 18-C GE Fanuc 18TB L2150 $125000.00 0 Yes 30.5" 18" x 42.5" 2,240 3.5" 12 Swing Travels RPM Bar Cap. Stations
10333 LATHES, CNC, 2-AXIS, UNIVERSAL 1995 Daewoo Puma-12LB Mitsubishi 520L Very Good Yes 1995 Daewoo Puma-12LB Mitsubishi 520L L2150 $29500.00 0 Yes 22.4" 10.2" x 41.3" 2,000 3.75" 12 Swing Travels RPM Bar Cap. Stations
9802 LATHES, CNC, 2-AXIS, UNIVERSAL 2006 Daewoo Puma-700L Fanuc 21iTB Very Good Yes 2006 Daewoo Puma-700L Fanuc 21iTB L2150 $275000.00 0 Yes 40.5" 18.5" x 127.98" 1,500 6.5" 12 Swing Travels RPM Bar Cap. Stations
8773 LATHES, CNC, 2-AXIS, UNIVERSAL 1995 Daewoo Puma-8 S Fanuc OTC Good Yes 19.7" Swing, 12.2" SOC, 18" Centers, 5,000 RPM,2" Bar Cap., 20 HP, 12 Sta. Turret, 8" 3-Jaw Hydraulic Chuck, Programmable Tailstock, Chip Conveyor, Tool Eye, RS-232 Port 1995 Daewoo Puma-8 S Fanuc OTC L2150 $24500.00 -1 Yes 19.7" 7.9" x 15" 5,000 2.05" 12 Swing Travels RPM Bar Cap. Stations
10614 LATHES, CNC, 2-AXIS, UNIVERSAL 1997 Daewoo Proturn 60 x 3000 Fanuc 18TC Good Yes 1997 Daewoo Proturn 60 x 3000 Fanuc 18TC L2150 $89000.00 0 Yes 27.95" 23.8" x 122" 1,000 6.5" 6 + 8 Swing Travels RPM Bar Cap. Stations
10320 LATHES, CNC, 2-AXIS, UNIVERSAL 2001 Daewoo Lynx-210A Fanuc OiTA Very Good Yes 2001 Daewoo Lynx-210A Fanuc OiTA L2150 $24500.00 0 Yes 20.1" 6.3" x 13" 6,000 1.75" 12 Swing Travels RPM Bar Cap. Stations
10098 LATHES, CNC, 2-AXIS, UNIVERSAL 1998 Daewoo Lynx-200A Fanuc 21T Very Good Yes 1998 Daewoo Lynx-200A Fanuc 21T L2150 $24500.00 0 Yes 20.1" 6.3" x 13" 6,000 1.75" 12 Swing Travels RPM Bar Cap. Stations
7999 LATHES, CNC, 2-AXIS, UNIVERSAL 1987 Daewoo Puma-6H S Fanuc 10T Good Yes 1987 Daewoo Puma-6H S Fanuc 10T L2150 $18500.00 -1 Yes 17.75" 6.3" x 16.4" 6,000 1.26" 10 Swing Travels RPM Bar Cap. Stations
10373 LATHES, CNC, 2-AXIS, UNIVERSAL 1997 Daewoo Lynx-200A Mitsubishi Meldas 50L Very Good Yes 1997 Daewoo Lynx-200A Mitsubishi Meldas 50L L2150 $22500.00 0 Yes 18.11" 6.3" x 13" 5,000 1.5" 10 Swing Travels RPM Bar Cap. Stations
9782 LATHES, CNC, 2-AXIS, UNIVERSAL 1995 Daewoo Puma-12LB Fanuc 15T Good Yes 1995 Daewoo Puma-12LB Fanuc 15T L2150 $39900.00 0 Yes 22.4" 10.2" x 41.3" 2,000 3.75" 12 Swing Travels RPM Bar Cap. Stations
10527 LATHES, CNC, 2-AXIS, UNIVERSAL 2000 Daewoo Puma-200 LC Mitsubishi 520L Very Good 2000 Daewoo Puma-200 LC Mitsubishi 520L L2150 $28000.00 0 Yes 20.1" 9.5" x 22.83" 4,500 2.56" 12 Swing Travels RPM Bar Cap. Stations
9354 LATHES, CNC, 2-AXIS, UNIVERSAL 2008 Doosan Lynx-200A Mitsubishi M50-L Excellent Yes 2008 Doosan Lynx-200A Mitsubishi M50-L L2150 $48000.00 0 Yes 18.1" 6.3" x 13" 6,000 1.75" 12 Swing Travels RPM Bar Cap. Stations
9794 LATHES, CNC, 2-AXIS, UNIVERSAL 1999 Doosan S390L Fanuc 18T Very Good Yes 1999 Doosan S390L Fanuc 18T L2150 $39000.00 0 Yes 30.3" 10" x 39.52" 3,500 3.6" 12 Swing Travels RPM Bar Cap. Stations
9715 LATHES, CNC, 2-AXIS, UNIVERSAL 2007 Doosan Lynx-220LC Fanuc 21T Very Good Yes 2007 Doosan Lynx-220LC Fanuc 21T L2150 $59500.00 0 Yes 20.1" 6.3" x 20.9" 4,000 2.62" 12 Swing Travels RPM Bar Cap. Stations
9941 LATHES, CNC, 2-AXIS, UNIVERSAL 2006 Doosan S-400 Fanuc OiT Very Good Yes 2006 Doosan S-400 Fanuc OiT L2150 $49900.00 0 Yes 24.02" 8.45" x 28.1" 3,500 3.01" 10 Swing Travels RPM Bar Cap. Stations
10495 LATHES, CNC, 2-AXIS, UNIVERSAL 2008 Doosan Puma-400B Fanuc 21iTB Excellent Yes 2008 Doosan Puma-400B Fanuc 21iTB L2150 $139000.00 0 Yes 30.3" 14.3" x 43.5" 2,000 4.62" 12 Swing Travels RPM Bar Cap. Stations
6559 LATHES, CNC, 2-AXIS, UNIVERSAL 2001 Doosan T-210 Fanuc 18T Good Yes 2001 Doosan T-210 Fanuc 18T L2150 $79900.00 0 Yes 14.1" 8.27" x 7.88" 4,000 2" 10 Swing Travels RPM Bar Cap. Stations
10347 LATHES, CNC, 2-AXIS, UNIVERSAL 2001 Femco HL-55S Fanuc OT Very Good Yes 2001 Femco HL-55S Fanuc OT L2150 $72000.00 0 Yes 28.62" 13.39" x 43.31" 2,500 4.53" 12 Swing Travels RPM Bar Cap. Stations
10052 LATHES, CNC, 2-AXIS, UNIVERSAL 2000 Femco Durga 25 Fanuc OTC Good Yes 2000 Femco Durga 25 Fanuc OTC L2150 $22500.00 0 Yes 17.75" 8.45" x 20" 4,800 2" 10 Swing Travels RPM Bar Cap. Stations
10230 LATHES, CNC, 2-AXIS, UNIVERSAL 2007 Haas SL-30T Haas 32 BIT Very Good Yes 2007 Haas SL-30T Haas 32 BIT L2150 $62500.00 0 Yes 30" 11.3" x 34" 3,400 3" 12 Swing Travels RPM Bar Cap. Stations
10577 LATHES, CNC, 2-AXIS, UNIVERSAL 2005 Haas SL-30T BB Haas 32 BIT Very Good Yes 2005 Haas SL-30T BB Haas 32 BIT L2150 $63500.00 0 Yes 30" 11.3" x 24" 2,800 4" 12 Swing Travels RPM Bar Cap. Stations
10414 LATHES, CNC, 2-AXIS, UNIVERSAL 1999 Haas SL-30T Haas 32 BIT Good Yes 1999 Haas SL-30T Haas 32 BIT L2150 $39500.00 0 Yes 30" 11.3" x 34" 3,400 3" 12 Swing Travels RPM Bar Cap. Stations
10370 LATHES, CNC, 2-AXIS, UNIVERSAL 2007 Haas TL-3 Haas 32 BIT Very Good Yes 2007 Haas TL-3 Haas 32 BIT L2150 $49900.00 0 Yes 20" 12" x 60" 1,800 3" 10 Swing Travels RPM Bar Cap. Stations
10576 LATHES, CNC, 2-AXIS, UNIVERSAL 2006 Haas SL-30T Haas 32 BIT Very Good Yes 2006 Haas SL-30T Haas 32 BIT L2150 $54500.00 0 Yes 30" 11.3" x 34" 3,400 3" 12 Swing Travels RPM Bar Cap. Stations
10291 LATHES, CNC, 2-AXIS, UNIVERSAL 1999 Haas SL-20T BB Haas 32 BIT Excellent Yes 1999 Haas SL-20T BB Haas 32 BIT L2150 $35000.00 0 Yes 20" 8.45" x 20" 3,400 2.5" 10 Swing Travels RPM Bar Cap. Stations
10301 LATHES, CNC, 2-AXIS, UNIVERSAL 2005 Haas SL-30T Haas 32 BIT Very Good Yes 30" Swing, 14.5" OCS, 14.5" Max Mach., 34" BC, 3,400 RPM, 30 HP, 12 Sta. Turret, 3" Bar Cap., 10" 3-Jaw, Programmable Tailstock, Bar Feed Interface, Two (2) Speed Gear Box, Rigid Tapping, 1 Meg Memory, Parts Catcher, Spindle Orientation, High Intensity Lighting, Chip Auger, Under 1,000 Spindle Hours 2005 Haas SL-30T Haas 32 BIT L2150 $69900.00 0 Yes 30" 11.3" x 34" 3,400 3" 12 Swing Travels RPM Bar Cap. Stations
10536 LATHES, CNC, 2-AXIS, UNIVERSAL 2007 Haas TL-2 Haas 32 BIT Excellent Yes 2007 Haas TL-2 Haas 32 BIT L2150 $42500.00 0 Yes 20" 12" x 60" 1,800 3.5" 4 Swing Travels RPM Bar Cap. Stations
9503 LATHES, CNC, 2-AXIS, UNIVERSAL 2007 Haas SL-30T Haas 32 BIT Very Good Yes 2007 Haas SL-30T Haas 32 BIT L2150 $64000.00 0 Yes 30" 11.3" x 34" 2,400 3" 12 Swing Travels RPM Bar Cap. Stations
10463 LATHES, CNC, 2-AXIS, UNIVERSAL 2006 Hankook ProTurn Fanuc 21iTB Good Yes 2006 Hankook ProTurn Fanuc 21iTB L2150 $199000.00 0 Yes 42" 18" x 158" 630 10" 8 Swing Travels RPM Bar Cap. Stations
9780 LATHES, CNC, 2-AXIS, UNIVERSAL 1996 Hardinge Conquest T-42 Fanuc 18TC Good Yes 1996 Hardinge Conquest T-42 Fanuc 18TC L2150 $29500.00 0 Yes 21.2" 5.31" x 13.9" 4,400 2" 15 Swing Travels RPM Bar Cap. Stations
9822 LATHES, CNC, 2-AXIS, UNIVERSAL 1997 Harrison Alpha 400 Harrison / Fanuc Control Good Yes 1997 Harrison Alpha 400 Harrison / Fanuc Control L2150 $17950.00 0 Yes 16" 8.25" x 45" 2,500 2" 4 Swing Travels RPM Bar Cap. Stations
10613 LATHES, CNC, 2-AXIS, UNIVERSAL 1980 Hitachi-Seiki 4NE-600 Fanuc 6T Good Yes 1980 Hitachi-Seiki 4NE-600 Fanuc 6T L2150 $10500.00 -1 Yes 22.75" 7.87" x 24.4" 3,150 2.25 12 Swing Travels RPM Bar Cap. Stations
10194 LATHES, CNC, 2-AXIS, UNIVERSAL 1982 Hitachi-Seiki 4NE-600 Fanuc 6TB Good No 1982 Hitachi-Seiki 4NE-600 Fanuc 6TB L2150 $36500.00 -1 Yes 22.75" 7.87" x 24.4" 3,150 2.25" 12 Swing Travels RPM Bar Cap. Stations
8043 LATHES, CNC, 2-AXIS, UNIVERSAL 1986 Hitachi-Seiki Hitec-Turn 20 Seicos Multi Good Yes 17.7" Swing, 11.2" OCS, 16" Centers, 3,600 RPM, 15 HP, 10 Station Turret, 8" 3-Jaw Hydraulic Chuck, Hydraulic Tailstock With Programmable Quill, Color CRT, RS-232 Port, Turret Tooling, Coolant System, Chip Conveyor, Conversational Control 1986 Hitachi-Seiki Hitec-Turn 20 Seicos Multi L2150 $19500.00 -1 Yes 17.7" 6.7" x 13.4" 3,600 1.5" 10 Swing Travels RPM Bar Cap. Stations
9923 LATHES, CNC, 2-AXIS, UNIVERSAL 2002 Hwacheon Mega 58 Fanuc 21T Excellent Yes 2002 Hwacheon Mega 58 Fanuc 21T L2150 $62500.00 0 Yes 22.8" 6.9" x 50" 1,500 3" 8 Swing Travels RPM Bar Cap. Stations
9940 LATHES, CNC, 2-AXIS, UNIVERSAL 1982 Ikegai AX-30N Fanuc 6TB Good Yes 1982 Ikegai AX-30N Fanuc 6TB L2150 -1 Yes 23.625" 11.812" x 60" 2,500 3.5" 12 Swing Travels RPM Bar Cap. Stations
9915 LATHES, CNC, 2-AXIS, UNIVERSAL 2005 Johnford ST-70C Fanuc 21i Very Good Yes 2005 Johnford ST-70C Fanuc 21i L2150 $129500.00 0 Yes 31.1" 12.6" x 63" 1,200 5.5" 12 Swing Travels RPM Bar Cap. Stations
10399 LATHES, CNC, 2-AXIS, UNIVERSAL 2002 Johnford SL-65B Fanuc OiT Very Good Yes 2002 Johnford SL-65B Fanuc OiT L2150 $59900.00 0 Yes 22.83" 10" x 59" 3,500 3" 12 Swing Travels RPM Bar Cap. Stations
9545 LATHES, CNC, 2-AXIS, UNIVERSAL 1986 Kuraki LCN 12-20 Fanuc 3TB Very Good Yes b 1986 Kuraki LCN 12-20 Fanuc 3TB L2150 $122500.00 0 Yes 32 1/4" 10" x 75" 350 12 5/8" 4 Swing Travels RPM Bar Cap. Stations
9228 LATHES, CNC, 2-AXIS, UNIVERSAL 1982 Lodge and Shipley 1540U GE 1050 Good Yes 30" Swing, 16" SOC, 17.3 Turn Dia., 78" Centers, 2,000 RPM, 50 HP, 12 Station Turret, 15" 3-Jaw Chuck, Geared Head, Programmable Tail Stock, Steady Rest, Chip Conveyor, Coolant Through Turret 1982 Lodge and Shipley 1540U GE 1050 L2150 $19500.00 -1 Yes 30" 15.2" x 78" 2,000 4" 12 Swing Travels RPM Bar Cap. Stations
9591 LATHES, CNC, 2-AXIS, UNIVERSAL 1980/95 Lodge and Shipley Profiturn Fanuc GNO Good Yes 1980/95 Lodge and Shipley Profiturn Fanuc GNO L2150 $98000.00 0 Yes 40" 24 3/4" x 300" 650 12 1/2" 4 Swing Travels RPM Bar Cap. Stations
9229 LATHES, CNC, 2-AXIS, UNIVERSAL 1982 Lodge and Shipley 1225U GE 1050 Good Yes 25" Swing, 12" SOC, 15.2 Turn Dia., 78" Centers, 2,500 RPM, 40 HP, 12 Station Turret, 15" 3-Jaw Chuck, Geared Head, Programmable Tail Stock, Steady Rest, Chip Conveyor, Coolant Through Turret 1982 Lodge and Shipley 1225U GE 1050 L2150 $19500.00 -1 No 25" 12.2" x 78" 2,500 3" 16 Swing Travels RPM Bar Cap. Stations
9819 LATHES, CNC, 2-AXIS, UNIVERSAL 1983/97 Lodge and Shipley Profiturn 40 Fanuc GNO Very Good Yes 1983/97 Lodge and Shipley Profiturn 40 Fanuc GNO L2150 $62000.00 0 Yes 40" 24 3/4" x 300" 650 12 1/2" 4 Swing Travels RPM Bar Cap. Stations
10569 LATHES, CNC, 2-AXIS, UNIVERSAL 1994 Mazak Quick Turn-18N Mazatrol T-32B Good Yes 1994 Mazak Quick Turn-18N Mazatrol T-32B L2150 $19500.00 0 Yes 17.32" 7.09" x 20.08" 3,600 2.75 8 Swing Travels RPM Bar Cap. Stations
7480 LATHES, CNC, 2-AXIS, UNIVERSAL 1980 Mazak Powermaster R3000 Fanuc 20C Good No 1980 Mazak Powermaster R3000 Fanuc 20C L2150 $99500.00 0 Yes 36" 17.2" x 120" 1,500 5.252" 8 Swing Travels RPM Bar Cap. Stations
10598 LATHES, CNC, 2-AXIS, UNIVERSAL 1984 Mazak M-5 / 1500 Fanuc 6TB Good Yes 1984 Mazak M-5 / 1500 Fanuc 6TB L2150 $34500.00 -1 Yes 24" 21.25" x 60" 1,100 6.5 8 + 6 Swing Travels RPM Bar Cap. Stations
9037 LATHES, CNC, 2-AXIS, UNIVERSAL 2008 Mazak Quick Turn Nexus-250 Mazatrol Matrix Excellent Yes 2008 Mazak Quick Turn Nexus-250 Mazatrol Matrix L2150 $92000.00 -1 Yes 24.02" 7.5" x 20.25" 4,000 3" 12 Swing Travels RPM Bar Cap. Stations
9155 LATHES, CNC, 2-AXIS, UNIVERSAL 1988 Mazak Quick Turn-10N Mazatrol T-2 Very Good Yes 1988 Mazak Quick Turn-10N Mazatrol T-2 L2150 $18000.00 0 Yes 17.6" 6.5" x 21.4" 3,600 1.55" 8 Swing Travels RPM Bar Cap. Stations
10599 LATHES, CNC, 2-AXIS, UNIVERSAL 1984 Mazak M-5 / 2000 Fanuc 6TB Good Yes 1984 Mazak M-5 / 2000 Fanuc 6TB L2150 $39500.00 -1 Yes 24" 21.25" x 80" 1,100 6.5 8 + 6 Swing Travels RPM Bar Cap. Stations
6050 LATHES, CNC, 2-AXIS, UNIVERSAL 1980 Mazak M-4 / 1500 Fanuc 6TB Good Yes 1980 Mazak M-4 / 1500 Fanuc 6TB L2150 $20000.00 -1 Yes 22" 21.7" x 62" 2,200 2.5" 10 Swing Travels RPM Bar Cap. Stations
8312 LATHES, CNC, 2-AXIS, UNIVERSAL 1979 Mazak M-5 Fanuc 6T Good Yes 1979 Mazak M-5 Fanuc 6T L2150 $49500.00 0 Yes 24" 22" x 100" 2,300 4.1" 14 Swing Travels RPM Bar Cap. Stations
9250 LATHES, CNC, 2-AXIS, UNIVERSAL 1995 Mazak M-5 / 2500 Mazatrol T-Plus Excellent Yes 1995 Mazak M-5 / 2500 Mazatrol T-Plus L2150 $89500.00 0 Yes 24" 21.25" x 96" 1,800 6.5" 14 Swing Travels RPM Bar Cap. Stations
10492 LATHES, CNC, 2-AXIS, UNIVERSAL 1995 Mazak Quick Turn-18N Mazatrol T-Plus Good Yes 1995 Mazak Quick Turn-18N Mazatrol T-Plus L2150 $31500.00 0 Yes 17.32" 7.09" x 20.08" 4,500 2.75 8 Swing Travels RPM Bar Cap. Stations
9505 LATHES, CNC, 2-AXIS, UNIVERSAL 1992 Mazak Quick Turn-28N Mazatrol T-32-2 Good Yes 1992 Mazak Quick Turn-28N Mazatrol T-32-2 L2150 $28500.00 0 Yes 20.6" 7.87" x 40.16" 2,500 3.5" 16 Swing Travels RPM Bar Cap. Stations
9529 LATHES, CNC, 2-AXIS, UNIVERSAL 1992 Mazak Quick Turn-10N Mazatrol T-32B Good Yes 1992 Mazak Quick Turn-10N Mazatrol T-32B L2150 $19900.00 0 Yes 17.32" 7.09" x 20.08" 4,500 1.75" 8 Swing Travels RPM Bar Cap. Stations
9534 LATHES, CNC, 2-AXIS, UNIVERSAL 1993 Mazak Quick Turn-15N Mazatrol T-32B Good Yes 1993 Mazak Quick Turn-15N Mazatrol T-32B L2150 $21500.00 0 Yes 17.32" 7.09" x 20.08" 4,500 1.96" 8 Swing Travels RPM Bar Cap. Stations
9593 LATHES, CNC, 2-AXIS, UNIVERSAL 1989 Mazak Quick Turn-15 Mazatrol T-2 Very Good Yes 17.2" Swing, 3,000 RPM, 20 HP, 20.08" x 7.09" Travels, 2.44" Bar Cap., 8 Position Turret, 8" 3-Jaw Chuck, Tool Presetter, Tailstock,Parts Catcher 1989 Mazak Quick Turn-15 Mazatrol T-2 L2150 $15500.00 0 Yes 17.32" 7.09" x 20.08" 3,000 1.96" 8 Swing Travels RPM Bar Cap. Stations
10128 LATHES, CNC, 2-AXIS, UNIVERSAL 1986 Mazak Quick Turn-10N Mazatrol T-1 Fair Yes 1986 Mazak Quick Turn-10N Mazatrol T-1 L2150 -1 On Way 17.6" 6.5" x 21.4" 3,600 1.55" 8 Swing Travels RPM Bar Cap. Stations
10127 LATHES, CNC, 2-AXIS, UNIVERSAL 1985 Mazak Quick Turn-10N Mazatrol T-1 Fair Yes 1985 Mazak Quick Turn-10N Mazatrol T-1 L2150 -1 On Way 17.6" 6.5" x 21.4" 3,600 1.55" 8 Swing Travels RPM Bar Cap. Stations
9608 LATHES, CNC, 2-AXIS, UNIVERSAL 2002 Mazak Quick Turn-350 Mazatrol Fusion 640 T Good Yes 2002 Mazak Quick Turn-350 Mazatrol Fusion 640 T L2150 $82500.00 0 Yes 25.93" 10.63" x 48.03" 2,500 4" 24 Swing Travels RPM Bar Cap. Stations
10009 LATHES, CNC, 2-AXIS, UNIVERSAL 1979/1997 Mazak M-5 / 2500 Mitsubishi Meldas 500 Good Yes 1979/1997 Mazak M-5 / 2500 Mitsubishi Meldas 500 L2150 $59500.00 0 Yes 24" 21.25' x 101" 1,000 6" 8 / 4 Swing Travels RPM Bar Cap. Stations
10554 LATHES, CNC, 2-AXIS, UNIVERSAL 2001 Mazak Quick Turn-250 Mazatrol Fusion 640 T Good Yes 2001 Mazak Quick Turn-250 Mazatrol Fusion 640 T L2150 $49500.00 0 Yes 23.65" 8.46" x 20.1" 5,000 2" 12 Swing Travels RPM Bar Cap. Stations
10367 LATHES, CNC, 2-AXIS, UNIVERSAL 2001 Mazak Super Quick Turn-200 Mazatrol Fusion 640 T Good Yes 2001 Mazak Super Quick Turn-200 Mazatrol Fusion 640 T L2150 $27500.00 0 Yes 20.67" 7.48" x 22.625" 5,000 2.01" 12 Swing Travels RPM Bar Cap. Stations
9820 LATHES, CNC, 2-AXIS, UNIVERSAL 2006 Mighty Viper VT-40A Fanuc 21iTB Excellent Yes 2006 Mighty Viper VT-40A Fanuc 21iTB L2150 $79500.00 0 Yes 39.37" 17.72" x 39.37" 2,100 4" 12 Swing Travels RPM Bar Cap. Stations
10249 LATHES, CNC, 2-AXIS, UNIVERSAL 1992 Miyano BNC-34C Fanuc 0T Very Good Yes 10.5" Swing, 4 1/16" Max. Turning Dia., 9" Turning Length, 5,000 RPM, 7.5 HP, 6 Sta. Turret, Tailstock, Parts Catcher, RS-232 Port, Tool Holders 1992 Miyano BNC-34C Fanuc 0T L2150 -1 On Way 10 1/2" 4" x 9 1/4" 5,000 1 1/4" 6 Swing Travels RPM Bar Cap. Stations
10265 LATHES, CNC, 2-AXIS, UNIVERSAL 1997 Mori-Seiki SL-200 Mitsubishi MSC-501 (18iTA) Very Good Yes 1997 Mori-Seiki SL-200 Mitsubishi MSC-501 (18iTA) L2150 $44500.00 0 Yes 26.8" 9.3" x 20.5" 4,000 2.56" 12 Swing Travels RPM Bar Cap. Stations
10177 LATHES, CNC, 2-AXIS, UNIVERSAL 1980 Mori-Seiki TL-5 Fanuc 6TA Good Yes 1980 Mori-Seiki TL-5 Fanuc 6TA L2150 $9000.00 -1 Yes 24.4" 8" x 39" 2,500 2.5" 8 Swing Travels RPM Bar Cap. Stations
10132 LATHES, CNC, 2-AXIS, UNIVERSAL 1997 Mori-Seiki SL-300 B / 700 Fanuc 18iTA Needs Repair Yes 18" Swing, 27.9" B.C., 2,500 RPM, 40 HP, 12 Sta. Turret, 12" 3-Jaw Hydraulic Chuck, 1997 Mori-Seiki SL-300 B / 700 Fanuc 18iTA L2150 $19500.00 -1 18" 9.8" x 27.5" 2,500 3.5" 12 Swing Travels RPM Bar Cap. Stations
9968 LATHES, CNC, 2-AXIS, UNIVERSAL 1997 Mori-Seiki SL-65B Fanuc 18T Good Yes 1997 Mori-Seiki SL-65B Fanuc 18T L2150 $179500.00 0 Yes 35" 13.8" x 33.9" 1,010 5.5" 12 Swing Travels RPM Bar Cap. Stations
10441 LATHES, CNC, 2-AXIS, UNIVERSAL 1998 Mori-Seiki CL-200B Mori-Seiki MSC-803L Good Yes 1998 Mori-Seiki CL-200B Mori-Seiki MSC-803L L2150 $41000.00 0 Yes 20.8" 9.25" x 22.4" 3,500 2.5" 10 Swing Travels RPM Bar Cap. Stations
10384 LATHES, CNC, 2-AXIS, UNIVERSAL 1990 Mori-Seiki SL-65B Fanuc OT Good Yes 1990 Mori-Seiki SL-65B Fanuc OT L2150 $89500.00 0 Yes 35" 13.8" x 33.9" 1,010 5.5" 12 Swing Travels RPM Bar Cap. Stations
9786 LATHES, CNC, 2-AXIS, UNIVERSAL 1984 Mori-Seiki SL-1 Fanuc 6T Good No 16.5" Swing, 6.2" Max. Turning, 4,500 RPM, 10 HP, 8 Station Turret, Hydraulic Tailstock, 6" Collet Chuck, RS-232 Port, Turbo Chip Conveyor 1984 Mori-Seiki SL-1 Fanuc 6T L2150 $10500.00 -1 Yes 16.5" 2.7" x 10.8" 4,500 1.2" 8 Swing Travels RPM Bar Cap. Stations
9594 LATHES, CNC, 2-AXIS, UNIVERSAL 1980 Mori-Seiki LL-7B / 3000 Fanuc 6T Good Yes 1980 Mori-Seiki LL-7B / 3000 Fanuc 6T L2150 $79500.00 -1 Yes 42.9" 26.5" x 120" 750 8" 8 Swing Travels RPM Bar Cap. Stations
9381 LATHES, CNC, 2-AXIS, UNIVERSAL 1986 Mori-Seiki SL-3H Fanuc 6T Need Repair No 1986 Mori-Seiki SL-3H Fanuc 6T L2150 $8000.00 -1 Yes 22.4" 8.45" x 22" 4,000 2.5" 12 Swing Travels RPM Bar Cap. Stations
9367 LATHES, CNC, 2-AXIS, UNIVERSAL 1981 Mori-Seiki SL-7A Fanuc 6T Good Yes 35.8" Swing, 22.8" SOC, 65" Centers, 1,800 RPM, 12 Sta. Turret, 40 HP, 18" 3-Jaw Hydraulic Chuck, Tailstock, Flood Coolant System, Chip Conveyor 1981 Mori-Seiki SL-7A Fanuc 6T L2150 $69500.00 0 Yes 35.8" 15.75" x 61.02" 1,800 4.13" 12 Swing Travels RPM Bar Cap. Stations
9944 LATHES, CNC, 2-AXIS, UNIVERSAL 2002 Okuma Captain L-370 OSP-E100L Good Yes Swing Over Bed 20.8", Swing Over Saddle 16.54", Maximum Turning Diameter 14.56", Length 20", 3,800 RPM, 30 HP, 12 Sta. Turret, Tailstock, Tool Presetter, 10" 3-Jaw Chuck, Chip Conveyor, One Touch IGF 2002 Okuma Captain L-370 OSP-E100L L2150 $34500.00 0 Yes 20.08" 10.23" x 19.68" 4,500 2" 12 Swing Travels RPM Bar Cap. Stations
8974 LATHES, CNC, 2-AXIS, UNIVERSAL 1987 Okuma LC-30 1SC / 1000 OSP-5000L Good Yes 19.69" Swing, 17.72" Turn Dia., 3,000 RPM, 40 HP, 12 Sta. VDI Turret, 12" 3-Jaw Kitagawa Chuck, RS-232 Port, Miscellaneous Tool Holders, Chip Conveyor, Coolant System, Machine Rebuilt About Four (4) Years Ago - New Control, New Ball Screws, New Hydraulic Kit In Tailstock, Wipers, Installed New VDI Turret 1987 Okuma LC-30 1SC / 1000 OSP-5000L L2150 $29000.00 -1 Yes 19.69" 11.42" x 40.16" 3,000 2.5" 12 Swing Travels RPM Bar Cap. Stations
10339 LATHES, CNC, 2-AXIS, UNIVERSAL 1993 Okuma LB-15 II OSP-5020L Good Yes 1993 Okuma LB-15 II OSP-5020L L2150 $18500.00 0 Yes 20.87" 8.34" x 20.47" 4,500 2.44" 12 Swing Travels RPM Bar Cap. Stations
8260 LATHES, CNC, 2-AXIS, UNIVERSAL 1993 Okuma LB-25 OSP-5020LG Fair Yes 1993 Okuma LB-25 OSP-5020LG L2150 $22500.00 -1 Yes 24.43" 9.05" x 35.59" 3,500 2.5" 12 Swing Travels RPM Bar Cap. Stations
8325 LATHES, CNC, 2-AXIS, UNIVERSAL 1993 Okuma and Howa ACT-20 Fanuc 18T Very Good Yes 20" Swing, 13.3" SOC, 11.81" Turning Dia., 18" Turning Length, 4,500 RPM, 2" Bar Cap. 20 HP, 12 Station Turret, Tailstock, 8" 3-Jaw Hydraulic Chuck, Chip Conveyor, Parts Catcher, Barfeed Interface 1993 Okuma and Howa ACT-20 Fanuc 18T L2150 $42000.00 -1 Yes 19.68" 7.08" x 18.11" 4,500 2.44" 12 Swing Travels RPM Bar Cap. Stations
8324 LATHES, CNC, 2-AXIS, UNIVERSAL 1996 Okuma and Howa ACT-35L Fanuc 18T Very Good Yes 19.68"Swing, 17.25"SOC, 13.77" Turning Dia., 48.6 Turning Length, 3,500 RPM, 3.125" Bar Cap. 25 HP, 12 Station Turret, Programmable Tailstock Body & Quill, 12" 3-Jaw Hydraulic Chuck, Chip Conveyor, New X-Axis Ball Screw 1996 Okuma and Howa ACT-35L Fanuc 18T L2150 $62500.00 -1 Yes 19.68" 7.87" x 48.6" 3,500 3.125" 12 Swing Travels RPM Bar Cap. Stations
8377 LATHES, CNC, 2-AXIS, UNIVERSAL 2009 Poreba PNA 80/4M Fanuc OiTC New Yes 2009 Poreba PNA 80/4M Fanuc OiTC L2150 $99500.00 0 Yes 30" 15.3" x 158" 1,200 6" 8 Swing Travels RPM Bar Cap. Stations
9598 LATHES, CNC, 2-AXIS, UNIVERSAL 2007 Poreba BNC 26120 X Fanuc OiTC Very Good Yes 26" Swing, 2,400 RPM, 30 HP, 120" x 26", 4.1" Spindle Bore, 8 Position Turret, Two (2) Steady Rests, Tailstock, Coolant System, Guarding, 20" 4-Jaw Chuck 2007 Poreba BNC 26120 X Fanuc OiTC L2150 $79500.00 0 Yes 26" 26" x 120": 2,400 4.1" 8 Swing Travels RPM Bar Cap. Stations
8891 LATHES, CNC, 2-AXIS, UNIVERSAL 2008 Poreba PNA 60/2M Fanuc OiTC New Yes 2008 Poreba PNA 60/2M Fanuc OiTC L2150 $69500.00 0 Yes 23.4" 8.3" x 78.74" 2,400 4.1" 8 Swing Travels RPM Bar Cap. Stations
9815 LATHES, CNC, 2-AXIS, UNIVERSAL 2001 Romi M-20 Fanuc 21iT Excellent Yes 2001 Romi M-20 Fanuc 21iT L2150 $45000.00 0 Yes 20.5" 11" x 60" 2,200 3.15" 4 Swing Travels RPM Bar Cap. Stations
10113 LATHES, CNC, 2-AXIS, UNIVERSAL 2003 Romi M-20 Fanuc 21iT Very Good Yes 20.5" Swing, 17.2" SOC, 10.2" Tunr Dia., 60" Centers, 3,000 RPM, 2.56" Spindle Bore, 15 HP, Quick Change Tool Post, 12.5" 3-Jaw Chuck, Conversational Program System, Constant Surface Speed, Under 1,400 Cutting Hours 2003 Romi M-20 Fanuc 21iT L2150 $39900.00 -1 Yes 20.5" 11" x 60" 3,000 2.56" 4 Swing Travels RPM Bar Cap. Stations
10483 LATHES, CNC, 2-AXIS, UNIVERSAL 2005 Romi M-20 Fanuc 21iT Like New Yes 2005 Romi M-20 Fanuc 21iT L2150 $64500.00 0 Yes 20.47" 11.02" x 60" 2,200 3.15" 4 Swing Travels RPM Bar Cap. Stations
9597 LATHES, CNC, 2-AXIS, UNIVERSAL Stanko CAK6163D Fanuc 0iTC Very Good Yes 24.8" Swing, 1,000 RPM, 5 HP, 112.2" x 12.6" Travels, 4.9" Spindle Bore, 4 Position Turret, Two (2) Steady Rests, Tailstock, Coolant System Stanko CAK6163D Fanuc 0iTC L2150 $65000.00 0 Yes 24.8" 12.6" x 112.2" 1,000 4.9" 4 Swing Travels RPM Bar Cap. Stations
10596 LATHES, CNC, 2-AXIS, UNIVERSAL 2000 Supermax TC-36 Fanuc 18T Very Good Yes 2000 Supermax TC-36 Fanuc 18T L2150 $39500.00 0 Yes 27.16" 12.20" x 49.21" 7 - 2,500 3.5" 12 Swing Travels RPM Bar Cap. Stations
5961 LATHES, CNC, 2-AXIS, UNIVERSAL 1990 Timemaster 350 CNC Fanuc OTA Good Yes 1990 Timemaster 350 CNC Fanuc OTA L2150 $82000.00 0 Yes 29.5" 20.866" x 81.125" 1,255 8.1" 12 Swing Travels RPM Bar Cap. Stations
7750 LATHES, CNC, 2-AXIS, UNIVERSAL 2008 Toolmex TUR-930 MN/236 Fanuc 21iT New Yes 2008 Toolmex TUR-930 MN/236 Fanuc 21iT L2150 $345000.00 0 Yes 37.4" 19.3" x 238" 1,200 5.5" 8 Swing Travels RPM Bar Cap. Stations
10060 LATHES, CNC, 2-AXIS, UNIVERSAL 2010 Willis 3280 Fanuc OiTD New Yes 2010 Willis 3280 Fanuc OiTD L2150 $201500.00 0 Yes 31.5" 21" x 72" 600 10" 8 / 4 Swing Travels RPM Bar Cap. Stations
10038 LATHES, CNC, 2-AXIS, UNIVERSAL 2010 Willis 32120 Fanuc OiTC New Yes 2010 Willis 32120 Fanuc OiTC L2150 $224900.00 -1 Yes 31.5" 21" x 112" 600 12" 8 / 4 Swing Travels RPM Bar Cap. Stations
10012 LATHES, CNC, 2-AXIS, UNIVERSAL 1997 Yang SML-20 Fanuc OiTD Very Good Yes 1997 Yang SML-20 Fanuc OiTD L2150 $27500.00 0 Yes 18.9" 8.45" x 20" 4,000 2.4" 8 Swing Travels RPM Bar Cap. Stations
9771 LATHES, CNC, 2-AXIS, W- SUB-SPINDLE 1999 Daewoo Puma-250 SB Fanuc 18T Good Yes 1999 Daewoo Puma-250 SB Fanuc 18T L2125S $34500.00 0 Yes 22.4" 7.87" x 26.77" 4,000 3.03" 12 Swing Travels RPM Bar Cap. Stations
10289 LATHES, CNC, 2-AXIS, W- SUB-SPINDLE 1999 Daewoo Puma-250 SB Fanuc 18T Very Good Yes 1999 Daewoo Puma-250 SB Fanuc 18T L2125S -1 On Way 22.4" 7.87" x 6.99" 4,000 1.5" 12 Swing Travels RPM Bar Cap. Stations
8888 LATHES, CNC, 2-AXIS, W- SUB-SPINDLE 2000 Mazak Super Quick Turn-250S Mazatrol Fusion 640T Very Good Yes 2000 Mazak Super Quick Turn-250S Mazatrol Fusion 640T L2125S $79500.00 0 Yes 20.67" 7.5" x 20.9" 4,000 2.5" 12 Swing Travels RPM Bar Cap. Stations
10529 LATHES, CNC, 2-AXIS, W- SUB-SPINDLE 2002 Okuma Captain L-370 W OSP-E100L Very Good Yes 2002 Okuma Captain L-370 W OSP-E100L L2125S $69500.00 0 Yes 20.08" 10.23" x 20.47" 4,500 2.5" 12 Swing Travels RPM Bar Cap. Stations
10181 LATHES, CNC, 2-AXIS, W- SUB-SPINDLE 1995 Okuma Cadet LNC-8 W OSP-5020L Good Yes 1995 Okuma Cadet LNC-8 W OSP-5020L L2125S $32500.00 0 Yes 15.75" 6.89" x 16.53" 3,500 1.77" 12 Swing Travels RPM Bar Cap. Stations
9666 LATHES, CNC, 3-AXIS, CHUCKER W-MILLING 2008 Doosan Puma-V-550M Fanuc 21iTB Like New Yes 2008 Doosan Puma-V-550M Fanuc 21iTB L2125M $225000.00 0 Yes 31.5" 15.4" x 31" 2,000 1.75" 10 Swing Travels RPM Bar Cap. Stations
9356 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2002 Akira-Seiki SLC-35 Fanuc OTC Very Good Yes 2002 Akira-Seiki SLC-35 Fanuc OTC L2150M $52000.00 0 Yes 25" 8" x 23.2" 4,000 3.03" 12 Swing Travels RPM Bar Cap. Stations
8239 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2008 Amera-Seiki T-310 MC Fanuc 0iTC Like New Yes 2008 Amera-Seiki T-310 MC Fanuc 0iTC L2150M $96000.00 -1 Yes 23.6" 8.85" x 30.31" 4,200 3.03" 12 Swing Travels RPM Bar Cap. Stations
9793 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2008 Amera-Seiki T-312 MC Fanuc 0iTC New Yes 2008 Amera-Seiki T-312 MC Fanuc 0iTC L2150M $99900.00 -1 Yes 23.6" 8.85" x 30" 3,400 3.5" 12 Swing Travels RPM Bar Cap. Stations
10284 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2007 Doosan Puma-280 LM Fanuc 21iTB Very Good Yes 2007 Doosan Puma-280 LM Fanuc 21iTB L2150M $80000.00 0 Yes 23" 11.1" x 36.8" 2,800 3" 12 Swing Travels RPM Bar Cap. Stations
9525 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 1995 Hitachi-Seiki Hi-Cell CA-23 Seicos Sigma LIII Good Yes 1995 Hitachi-Seiki Hi-Cell CA-23 Seicos Sigma LIII L2150M $32500.00 0 Yes 17.3" 8.5" x 20.9" 4,000 2.5" 16 Swing Travels RPM Bar Cap. Stations
10003 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2001 Mazak Integrex 400 SYB Mazatrol Fusion 640 MT Very Good Yes 2001 Mazak Integrex 400 SYB Mazatrol Fusion 640 MT L2150M $198000.00 0 Yes 24.01" 22.83" x 43.11" 3,000 3.03" 40 Swing Travels RPM Bar Cap. Stations
9542 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 1985 Mazak Slant Turn-60 Mill Center Mazatrol T-1 Good Yes 1985 Mazak Slant Turn-60 Mill Center Mazatrol T-1 L2150M $69500.00 0 Yes 36.02" 25.39" x 80.12" 750 6" 15 Swing Travels RPM Bar Cap. Stations
8510 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 1997 Mazak Super Quick Turn-15M II Mazatrol T-PLUS Need Repiar Yes 1997 Mazak Super Quick Turn-15M II Mazatrol T-PLUS L2150M $39500.00 0 Yes 20.91" 7.125" x 22.75" 4,000 2" 12 Swing Travels RPM Bar Cap. Stations
6234 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 1995 Mazak Integrex 30 / 1000 Mazatrol T-PLUS Good Yes Swing 20", Swing Over Cross Slide 15.75", Maximum Turning Diameter 20", Length 40", 3,500 RPM, 35 HP, 20 Sta. ATC, 40 Taper, 10" 3-Jaw Chuck, Chip Conveyor, Coolant Through Milling Head, User Macros, Fully Programmable Tailstock Body and Quill, Automatic Tool Eye, EIA / ISO Input Function 1995 Mazak Integrex 30 / 1000 Mazatrol T-PLUS L2150M $72000.00 -1 Yes 20" 22.83" x 42" 3,500 3.03" 20 Swing Travels RPM Bar Cap. Stations
10572 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2000 Mazak Integrex 70YB Mazatrol Fusion 640 MT Very Good Yes 2000 Mazak Integrex 70YB Mazatrol Fusion 640 MT L2150M $295000.00 0 Yes 36" 29.72" x 122.91 1,300 6.5" 80 Swing Travels RPM Bar Cap. Stations
10608 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2000 Mazak Super Quick Turn-200M Mazatrol Fusion 640 T Very Good Yes 2000 Mazak Super Quick Turn-200M Mazatrol Fusion 640 T L2150M $69750.00 0 Yes 20.67" 7.48" x 22.64" 5,000 2 12 Swing Travels RPM Bar Cap. Stations
10594 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2007 Mazak Nexus Super Quick Turn-250MY Mazatrol Matrix Very Good Yes 2007 Mazak Nexus Super Quick Turn-250MY Mazatrol Matrix L2150M $121500.00 0 Yes 26.5" 9" x 21.28" 4,000 3" 12 Swing Travels RPM Bar Cap. Stations
10340 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 1989 Mazak Slant Turn-40 N ATC M/C Fanuc 11T Good Yes 1989 Mazak Slant Turn-40 N ATC M/C Fanuc 11T L2150M $39500.00 0 Yes 21.25" 21.65" x 83.4" 2,200 2.5" 80 Swing Travels RPM Bar Cap. Stations
8685 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 1997 Mazak Integrex 50Y / 1500 Mazatrol T-PLUS Good Yes 1997 Mazak Integrex 50Y / 1500 Mazatrol T-PLUS L2150M $199500.00 0 Yes 27.95" 25.39" x 63.46" x 4.13" 3,000 2.71" 80 Swing Travels RPM Bar Cap. Stations
10152 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2004 Mori-Seiki Super Hi-Cell CH-250 Seicos 18iTB Very Good Yes Swing 19.68", Swing Over Cross Slide 19.68", Maximum Turning Diameter 19.68", Length 28.3", 4,000 RPM, 25 HP, 20 Sta. ATC, 10" 3-Jaw Chuck & 8"-3-Jaw Chucks, Tool Presetter, Various Tool Holders 2004 Mori-Seiki Super Hi-Cell CH-250 Seicos 18iTB L2150M $125000.00 -1 Yes 19.68" 23.6" x 39.3" x 6" 4,000 2.5" 20 Swing Travels RPM Bar Cap. Stations
8263 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 1996 Mori-Seiki MT-25B Fanuc MF-T6 Very Good Yes 1996 Mori-Seiki MT-25B Fanuc MF-T6 L2150M $119500.00 0 Yes 46.85" 17.72" x 45.28" x 11.81" 3,500 3.5" 30 Swing Travels RPM Bar Cap. Stations
10274 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2005 Mori-Seiki NL-2500 MC / 700 Mori-Seiki MSX-850 Good Yes 2005 Mori-Seiki NL-2500 MC / 700 Mori-Seiki MSX-850 L2150M $119500.00 0 Yes 36.37" 10.24" x 31.3" 4,000 3.1" 12 Swing Travels RPM Bar Cap. Stations
9964 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2002 Okuma Captain L-470M / 650 OSP-E100L Good Yes 2002 Okuma Captain L-470M / 650 OSP-E100L L2150M $89500.00 0 Yes 24.4" 11.81" x 26.57" 3,000 3.5" 12 Swing Travels RPM Bar Cap. Stations
7663 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2000 Okuma and Howa HL-35M Fanuc 18iT Very Good Yes 2000 Okuma and Howa HL-35M Fanuc 18iT L2150M $42500.00 0 Yes 19.69" 7.87" x 24.02" 3,500 3.06" 12 Swing Travels RPM Bar Cap. Stations
8458 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 1999 Tacchi 71" x 551" Fanuc 16iT Very Good Yes 1999 Tacchi 71" x 551" Fanuc 16iT L2150M $950000.00 0 Yes 71" 39" x 551" 600 5.9" 12 Swing Travels RPM Bar Cap. Stations
6309 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 1999 Daewoo Puma-200L MSC Fanuc 18T Good Yes 1999 Daewoo Puma-200L MSC Fanuc 18T L2125MS $79500.00 0 Yes 20.1" 5.91" x 22.83" 4,500 2.66" 12 Swing Travels RPM Bar Cap. Stations
10436 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2001 Daewoo Puma-230 MSB Fanuc 18i Very Good Yes 2001 Daewoo Puma-230 MSB Fanuc 18i L2125MS $99500.00 0 Yes 21.65" 8.07" x 22.83" 6,000 2.56" 12 Swing Travels RPM Bar Cap. Stations
9910 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2005 Doosan Puma-240 MSC Fanuc 18iTB Very Good Yes 2005 Doosan Puma-240 MSC Fanuc 18iTB L2125MS $75000.00 -1 Yes 21.65" 8.07" x 22.83" 3,500 2.56" 12 Swing Travels RPM Bar Cap. Stations
10621 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 1993 Hardinge Conquest T-42 Fanuc 18T Good Yes 1993 Hardinge Conquest T-42 Fanuc 18T L2125MS $57500.00 0 Yes 21.2" 5.45" x 13.65" 5,000 1.625" 12 Swing Travels RPM Bar Cap. Stations
10045 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2000 Hwacheon ECO 21HS-S-MC Fanuc 18T Good Yes 2000 Hwacheon ECO 21HS-S-MC Fanuc 18T L2125MS $39500.00 0 Yes 23.6" 6.8" x 17.9" 4,000 2" 12 Swing Travels RPM Bar Cap. Stations
10541 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2007 Kia Super Kia Turn-21 LMS Fanuc OiTB Excellent Yes 2007 Kia Super Kia Turn-21 LMS Fanuc OiTB L2125MS $99500.00 0 Yes 21.7" 8.7" x 21.7" 4,000 2.56" 12 Swing Travels RPM Bar Cap. Stations
10355 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 1998 Mazak Super Quick Turn-200MS Mazatrol T-PLUS Good Yes 1998 Mazak Super Quick Turn-200MS Mazatrol T-PLUS L2125MS $49500.00 0 Yes 20.67" 7.5" x 22.62" 4,500 2.01" 12 Swing Travels RPM Bar Cap. Stations
10141 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2006 Mazak Integrex 300 III ST Mazatrol Fusion 640 MT Pro Very Good Yes 2006 Mazak Integrex 300 III ST Mazatrol Fusion 640 MT Pro L2125MS $315000.00 0 Yes 33.5" 24.8" x 62.41" x 4.53" 4,000 3" 40 Swing Travels RPM Bar Cap. Stations
7784 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2003 Mazak Super Quick Turn-100MSY Mazatrol Fusion 640 MT Very Good Yes 2003 Mazak Super Quick Turn-100MSY Mazatrol Fusion 640 MT L2125MS $116000.00 0 Yes 21.65" 7.25" x 17.875" x 4" 6,000 2" 12 Swing Travels RPM Bar Cap. Stations
9753 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 1994 Miyano BND-34S Fanuc 0TC/CRT Yes 2.95" Swg, 10 HP, 8 Turning / 4 Live Tool Turret, Collet Chucks, Parts Conveyor, 12' LNS Five Tube Barfeed 1994 Miyano BND-34S Fanuc 0TC/CRT L2125MS -1 On Way 4.75" 5.50" x 11.25" 5,000 1.34" 8 Swing Travels RPM Bar Cap. Stations
9714 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 1998 Miyano BNE-46S Fanuc 18T Very Good Yes 1998 Miyano BNE-46S Fanuc 18T L2125MS $57500.00 0 Yes 18" 5.9" x 15" 4,000 1.81" 12 Swing Travels RPM Bar Cap. Stations
10260 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2002 Mori-Seiki MT-2002SZ Fanuc 18iT Very Good Yes 2002 Mori-Seiki MT-2002SZ Fanuc 18iT L2125MS $99500.00 0 Yes 33.46" 22.2" x 42.4" 4,500 2.5" 20 Swing Travels RPM Bar Cap. Stations
10624 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2007 Mori-Seiki NL-2500 SMC / 700 Mori-Seiki MSX-850 III Very Good Yes 2007 Mori-Seiki NL-2500 SMC / 700 Mori-Seiki MSX-850 III L2125MS $126000.00 0 Yes 36.37" 10.24" x 23.2" 6,000 2.5" 12 Swing Travels RPM Bar Cap. Stations
10087 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2002 Mori-Seiki SL-204 SMC Mitsubishi MSG-805 Excellent Yes 2002 Mori-Seiki SL-204 SMC Mitsubishi MSG-805 L2125MS $105000.00 -1 Yes 26.8" 9.3" x 22" 4,500 2.5" 12 Swing Travels RPM Bar Cap. Stations
9337 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 1999 Mori-Seiki SL-200 SMC Mitsubishi MSC-501 (18iTA) Good Yes 1999 Mori-Seiki SL-200 SMC Mitsubishi MSC-501 (18iTA) L2125MS $79900.00 0 Yes 26.77" 7.87" x 52.36" 4,000 2.1" 12 Swing Travels RPM Bar Cap. Stations
10086 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2008 Mori-Seiki NL-2500 SMC / 700 Mori-Seiki MSX-850 MB Excellent Yes 2008 Mori-Seiki NL-2500 SMC / 700 Mori-Seiki MSX-850 MB L2125MS $159900.00 -1 Yes 36.37" 14" x 28.9" 4,000 3.1" 12 Swing Travels RPM Bar Cap. Stations
10050 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2002 Okuma Captain L-370 MW BB OSP-E100L Good Yes 2002 Okuma Captain L-370 MW BB OSP-E100L L2125MS $79500.00 0 Yes 20.08" 7.12" x 24.5" 3,800 3" 12 Swing Travels RPM Bar Cap. Stations
8634 LATHES, CNC, 4-AXIS, CHUCKER 2006 Amera-Seiki TS-42 Mitsubishi 64SM Demo Yes 2006 Amera-Seiki TS-42 Mitsubishi 64SM L21254 $55000.00 -1 Yes 12.59" 5.65" x 14.3" 4,000 1.625" 13 Swing Travels RPM Bar Cap. Stations
9296 LATHES, CNC, 4-AXIS, CHUCKER 2003 Kitako MT4-200 Fanuc 18iTA Good Yes Maximum Turning Diameter 7.8", Maximum Turning Length 3.9", 4,000 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10" 3-Jaw Chucks, Air Blow, Chip Conveyor, Coolant System 2003 Kitako MT4-200 Fanuc 18iTA L21254 $139500.00 0 Yes 7.8" 6.3" x 9.84" 4,000 1.35" 8 Swing Travels RPM Bar Cap. Stations
10398 LATHES, CNC, 4-AXIS, CHUCKER 2006 Kitako MT4-200 Fanuc 18iTB Very Good Yes 2006 Kitako MT4-200 Fanuc 18iTB L21254 $185000.00 0 Yes 7.8" 6.3" x 9.84" 4,000 1.35" 8 Swing Travels RPM Bar Cap. Stations
8809 LATHES, CNC, 4-AXIS, CHUCKER 1996 Kitako MT4-200 Fanuc 18T Good Yes Maximum Turning Diameter 7.8", Maximum Turning Length 3.9", 3,200 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10" 3-Jaw Chucks, Transformer, Chip Conveyor, Mist Collector 1996 Kitako MT4-200 Fanuc 18T L21254 $46500.00 -1 Yes 7.8" 6.3" x 9.84" 3,200 1.35" 8 Swing Travels RPM Bar Cap. Stations
8810 LATHES, CNC, 4-AXIS, CHUCKER 1995 Kitako MT4-200 Fanuc 18T Good Yes Maximum Turning Diameter 7.8", Maximum Turning Length 3.9", 3,200 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10" 3-Jaw Chucks, Transformer, Chip Conveyor, Mist Collector 1995 Kitako MT4-200 Fanuc 18T L21254 $46500.00 -1 Yes 7.8" 6.3" x 9.84" 3,200 1.35" 16 Swing Travels RPM Bar Cap. Stations
9295 LATHES, CNC, 4-AXIS, CHUCKER 2003 Kitako MT4-200 Fanuc 18iTA Good Yes Maximum Turning Diameter 7.8", Maximum Turning Length 3.9", 4,000 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10" 3-Jaw Chucks, Air Blow, Chip Conveyor, Coolant System 2003 Kitako MT4-200 Fanuc 18iTA L21254 $139500.00 0 Yes 7.8" 6.3" x 9.84" 4,000 1.35" 8 Swing Travels RPM Bar Cap. Stations
8998 LATHES, CNC, 4-AXIS, CHUCKER 1997 Murata MW-300G Fanuc 16TT Good Yes 11.6" Swing, 13.385 Distance Between Spindle, 6,000 RPM, 14 HP,8 Sta. Turrets, Two 6" 2-Jaw Hydraulic Chucks, Chip Conveyor, Two Multi-Position Indexing Gantry Loader With Turn Around Stations, Right Hand or Left Discharge Available, Machine Sat Idle For Eight (8) Years - Recently Gone Through 1997 Murata MW-300G Fanuc 16TT L21254 $59500.00 0 Yes 11.8" 5.11" x 5.7" 6,000 2.87" 8 Swing Travels RPM Bar Cap. Stations
9954 LATHES, CNC, 4-AXIS, CHUCKER 1997 Okuma LU-35 BB OSP-7000L Very Good Yes 1997 Okuma LU-35 BB OSP-7000L L21254 $123000.00 -1 Yes 29.13" 14.96" x 36.22" 2,800 3.62" 22 Swing Travels RPM Bar Cap. Stations
9029 LATHES, CNC, 4-AXIS, CHUCKER 1978 Warner and Swasey 2-SC-15 Allen Bradley 7360 Good No 17 3/8" Swing, 1,178 RPM, 4.5" Spindle Bore, 50 HP, Twin Turret, 15" 3-Jaw Hydraulic Chuck, Chip Conveyor, Steady Rest, Miscellaneous Tooling, Manuals, Behind the Tape Reader 1978 Warner and Swasey 2-SC-15 Allen Bradley 7360 L21254 $8000.00 -1 No 17 3/8" 7 3/4" x 54 7/8" 1,178 4.5" 11 Swing Travels RPM Bar Cap. Stations
9897 LATHES, CNC, 4-AXIS, UNIVERSAL 1996 Mori-Seiki ZL-25 / 500 Fanuc MF-D6 Good Yes 1996 Mori-Seiki ZL-25 / 500 Fanuc MF-D6 L21504 $49500.00 0 Yes 20.47" 6.3" x 23.23" 3,500 2.8" 18 Swing Travels RPM Bar Cap. Stations
8590 LATHES, CNC, 4-AXIS, UNIVERSAL 1985 Okuma LC-40 2ST OSP-5000LG Good Yes 1985 Okuma LC-40 2ST OSP-5000LG L21504 $18500.00 0 Yes 23.62" 11.22" x 41.34" 2,500 3" 20 Swing Travels RPM Bar Cap. Stations
10607 LATHES, CNC, 4-AXIS, UNIVERSAL 1996/2010 Okuma LOC-650 OSP-E100L Like New Yes 1996/2010 Okuma LOC-650 OSP-E100L L21504 $575000.00 0 Yes 31" 35.5" x 80.31" 500 14.76" 12 / 12 Swing Travels RPM Bar Cap. Stations
10271 LATHES, CNC, 4-AXIS, UNIVERSAL 1986 Okuma LC-50 2ST 1250 OSP-5020L Very Good Yes 1986 Okuma LC-50 2ST 1250 OSP-5020L L21504 $68000.00 0 Yes 36.9" 12.99" x 46" 1,000 7.87" 20 Swing Travels RPM Bar Cap. Stations
10120 LATHES, ENGINE Dong Yang LS Very Good Yes Dong Yang LS L3000 -1 Yes 20" 60" 1,800 1 3/4" Yes Swing Centers RPM Bar Cap. Threading
9972 LATHES, ENGINE 1982 Geminis GE-1200-S-3G Very Good Yes 1982 Geminis GE-1200-S-3G L3000 $159500.00 0 Yes 47.24" 315" 280 6" Yes Swing Centers RPM Bar Cap. Threading
9991 LATHES, ENGINE 1993 Hermes 34" x 200" Very Good Yes 1993 Hermes 34" x 200" L3000 $39500.00 0 Yes 34" 200" 670 6 1/8" Yes Swing Centers RPM Bar Cap. Threading
9047 LATHES, ENGINE 1978 Kingston HL-2500 Good Yes 1978 Kingston HL-2500 L3000 $12500.00 -1 Yes 21" 100" 2,500 3 1/8" Yes Swing Centers RPM Bar Cap. Threading
7996 LATHES, ENGINE 1978 Kingston HLC-1860 Very Good Yes 1978 Kingston HLC-1860 L3000 $14500.00 -1 Yes 18" 60" 1,500 3.14" Yes Swing Centers RPM Bar Cap. Threading
10111 LATHES, ENGINE 2000 Lansing 52" x 120" Very Good Yes 2000 Lansing 52" x 120" L3000 $300000.00 0 Yes 52" 120" 700 25" Yes Swing Centers RPM Bar Cap. Threading
8259 LATHES, ENGINE Lansing 48" x 120" Good Yes Lansing 48" x 120" L3000 $45000.00 0 Yes 48" 120" 600 4 3/4" Yes Swing Centers RPM Bar Cap. Threading
8497 LATHES, ENGINE 1966 Leblond 2516 Very Good Yes 1966 Leblond 2516 L3000 $37500.00 0 Yes 25" 165" 1,500 1 3/4" Yes Swing Centers RPM Bar Cap. Threading
10597 LATHES, ENGINE Leblond Model NI Very Good Yes Leblond Model NI L3000 $24500.00 0 Yes 31" 52" 600 2.25" Yes Swing Centers RPM Bar Cap. Threading
10312 LATHES, ENGINE 1956 Leblond 20" x 126" Good Yes Swing Over Bed 20", Swing Over Saddle 15 1/4", Maximum Turning Length 126", 2,000 RPM, 20 HP, Tailstock,15" 3-Jaw Chuck, 18" 4-Jaw Chuck, Aloris Tool Post, Inch / Metric Threading, Taper Attachment, Thread Dial Gear Stripped on Carriage 1956 Leblond 20" x 126" L3000 $9500.00 -1 Yes 20" 126" 2,000 1 3/4" Yes Swing Centers RPM Bar Cap. Threading
9555 LATHES, ENGINE 1974 Leblond Regal Very Good Yes 1974 Leblond Regal l3000 $39500.00 0 Yes 26" 96" 400 9" No Swing Centers RPM Bar Cap. Threading
9522 LATHES, ENGINE 1956 Leblond Regal Servo-Shift Very Good Yes Swing Over Bed 19", Swing Over Saddle 11 1/4", Maximum Turning Length 78", 1,800 RPM, 5 HP, Tailstock, 12" 4-Jaw Chuck, 10" 3-Jaw Chuck, 16" Face Plate, Flex Collet Head, Follow Rest, Inch / Metric Threading, Servo Shift Controls, Aloris Tool Post, Trav-a-Dial 1956 Leblond Regal Servo-Shift L3000 $9500.00 -1 Yes 19" 78" 1,800 1 3/4" Yes Swing Centers RPM Bar Cap. Threading
10311 LATHES, ENGINE 1956 Leblond 16" x 54" Good Yes Swing Over Bed 16", Swing Over Saddle 10 1/4", Maximum Turning Length 54", 2,000 RPM, 20 HP, Tailstock,15.5" 4-Jaw Chuck, 15.5" 3-Jaw Chuck, Inch Threading, Aloris Tool Post 1956 Leblond 16" x 54" L3000 $8000.00 -1 Yes 16" 54" 2,000 1 3/4" Yes Swing Centers RPM Bar Cap. Threading
8470 LATHES, ENGINE 1982 Leblond 26" x 72" Very Good Yes 1982 Leblond 26" x 72" L3000 $65000.00 0 Yes 26" 72" 600 9 1/4" Yes Swing Centers RPM Bar Cap. Threading
10299 LATHES, ENGINE 2003 Lion 31" x 120" Very Good Yes 2003 Lion 31" x 120" L3000 $59500.00 0 Yes 31" 120" 315 14" Yes Swing Centers RPM Bar Cap. Threading
7742 LATHES, ENGINE 1965 Lodge and Shipley 3220 Magna Turn Good Yes 1965 Lodge and Shipley 3220 Magna Turn L3000 $59500.00 0 No 38" 240" 875 3 5/8" Yes Swing Centers RPM Bar Cap. Threading
9196 LATHES, ENGINE 1978 Lodge and Shipley 2XE 3220 Good Yes 1978 Lodge and Shipley 2XE 3220 L3000 $49500.00 0 Yes 34 1/2" 144" 850 7" Yes Swing Centers RPM Bar Cap. Threading
9566 LATHES, ENGINE Lodge and Shipley 34" x 100" Very Good Yes Lodge and Shipley 34" x 100" L3000 $37500.00 0 Yes 34" 100" 451 8 7/8" Yes Swing Centers RPM Bar Cap. Threading
9563 LATHES, ENGINE 1951 Lodge and Shipley 37" x 100" Very Good Yes 1951 Lodge and Shipley 37" x 100" L3000 $49500.00 0 Yes 37" 100" 451 8 7/8" Yes Swing Centers RPM Bar Cap. Threading
9164 LATHES, ENGINE 1978 Mazak Junior Very Good Yes 1978 Mazak Junior L3000 $9900.00 0 Yes 18" 40" 1,500 3 1/8" Yes Swing Centers RPM Bar Cap. Threading
9871 LATHES, ENGINE Mazak HD-34 Very Good Yes Mazak HD-34 L3000 $37500.00 0 Yes 34" 120" 1,200 4" Yes Swing Centers RPM Bar Cap. Threading
8920 LATHES, ENGINE 1975 Meuser 66" x 384" Very Good Yes 1975 Meuser 66" x 384" L3000 $265000.00 0 Yes 66" 384" 400 4 1/2" No Swing Centers RPM Bar Cap. Threading
8838 LATHES, ENGINE 1968 Meuser M-IV-5 Very Good Yes 36.5" Swing, 26.5" SOC, 360" Centers, 15 HP, Inch Metric Threading, Four (4) Way Tool Post, Three (3) Steady Rests 1968 Meuser M-IV-5 L3000 $65000.00 -1 Yes 36.5" 360" 710 3 5/8" Yes Swing Centers RPM Bar Cap. Threading
8507 LATHES, ENGINE Meuser 32" x 120" Good Yes Meuser 32" x 120" L3000 $19500.00 0 Yes 32" 120" 900 2 5/8" Yes Swing Centers RPM Bar Cap. Threading
10010 LATHES, ENGINE 1955 Monarch 32NN Good Yes 1955 Monarch 32NN L3000 $59500.00 0 Yes 41" 336" 450 2.25" Yes Swing Centers RPM Bar Cap. Threading
8782 LATHES, ENGINE 1952 Monarch Model 25N Good Yes 1952 Monarch Model 25N L3000 $35000.00 0 Yes 36.5" 216" 405 2.2" Yes Swing Centers RPM Bar Cap. Threading
10298 LATHES, ENGINE Monarch 24N Fair Yes Monarch 24N L3000 $8500.00 0 Yes 27" 156" 303 3 3/4" Yes Swing Centers RPM Bar Cap. Threading
9872 LATHES, ENGINE 1952 Monarch 25N Good Yes 1952 Monarch 25N L3000 $29500.00 0 Yes 36.5" 216" 405 2.2" Yes Swing Centers RPM Bar Cap. Threading
7423 LATHES, ENGINE Niles AP48H-M67 Good Yes Niles AP48H-M67 L3000 $42500.00 0 Yes 52" 240" 100 1 3/4" Yes Swing Centers RPM Bar Cap. Threading
9994 LATHES, ENGINE 1983 Niles 78" x 240" Good Yes 1983 Niles 78" x 240" L3000 $94500.00 0 Yes 78" 240" 355 8 1/2" No Swing Centers RPM Bar Cap. Threading
8428 LATHES, ENGINE Niles 40" x 300" Fair Yes Niles 40" x 300" L3000 $34500.00 0 Yes 40" 300" 240 3 3/4" No Swing Centers RPM Bar Cap. Threading
9606 LATHES, ENGINE Niles 110" x 348" Good Yes Niles 110" x 348" L3000 $69500.00 0 No 110" 348" 80.1 9.5" Yes Swing Centers RPM Bar Cap. Threading
8786 LATHES, ENGINE Niles 40" x 25' Good Yes Niles 40" x 25' L3000 $34500.00 0 Yes 40" 300" 241 1 3/4" No Swing Centers RPM Bar Cap. Threading
8901 LATHES, ENGINE Niles 72" x 324" Good Yes Niles 72" x 324" L3000 $49500.00 0 Yes 76" 324" 2,000 5.6" Yes Swing Centers RPM Bar Cap. Threading
8152 LATHES, ENGINE 1988 Poreba TPK-90 / 2M Very Good Yes 1988 Poreba TPK-90 / 2M L3000 $35000.00 0 Yes 36" 78" 1,000 3 7/8" Yes Swing Centers RPM Bar Cap. Threading
9489 LATHES, ENGINE 2006 Potisje PA 1000 DC Like New Yes 2006 Potisje PA 1000 DC L3000 $129000.00 0 Yes 40" 72" 800 5 1/2" Yes Swing Centers RPM Bar Cap. Threading
9867 LATHES, ENGINE 1997 Ryazan 16K40 Very Good Yes 1997 Ryazan 16K40 L3000 $31500.00 0 Yes 33.07" 118" 1,250 4.13" Yes Swing Centers RPM Bar Cap. Threading
9167 LATHES, ENGINE 1992 Summit 16" x 40" Excellent Yes 1992 Summit 16" x 40" L3000 $10500.00 0 Yes 16" 40" 1,800 3" Yes Swing Centers RPM Bar Cap. Threading
10523 LATHES, ENGINE 1977 Summit 33" x 120" Very Good Yes 1977 Summit 33" x 120" L3000 $24950.00 0 Yes 33" 120" 1,010 4 1/8" Yes Swing Centers RPM Bar Cap. Threading
8059 LATHES, ENGINE T and B 24" x 120" Good Yes T and B 24" x 120" L3000 $15500.00 0 Yes 24" 126" 600 4 1/8" Yes Swing Centers RPM Bar Cap. Threading
8494 LATHES, ENGINE 1993 Tarnow TUJ-50M Very Good Yes 1993 Tarnow TUJ-50M L3000 $29500.00 0 Yes 22" 170" 1,600 3 1/2" Yes Swing Centers RPM Bar Cap. Threading
8498 LATHES, ENGINE 2000 Tos SN-71C/4000 Excellent Yes 2000 Tos SN-71C/4000 L3000 $25500.00 0 Yes 28" 160" 1,000 2.8" Yes Swing Centers RPM Bar Cap. Threading
9973 LATHES, ENGINE 1969 Tos SU-63 Good Yes 1969 Tos SU-63 L3000 $29500.00 0 Yes 25" 260" 1,180 2 3/8" Yes Swing Centers RPM Bar Cap. Threading
8058 LATHES, ENGINE 1995 Tru-Turn CW6280 Very Good Yes 1995 Tru-Turn CW6280 L3000 $19500.00 0 Yes 31.5" 120" 1,000 4 1/8" Yes Swing Centers RPM Bar Cap. Threading
9178 LATHES, ENGINE 1981 Tuda Oilstar 10120 Very Good Yes 1981 Tuda Oilstar 10120 L3000 $69500.00 0 Yes 41.33" 72" 350 10 1/4" Yes Swing Centers RPM Bar Cap. Threading
8791 LATHES, ENGINE 1966 VDF S-500 Good Yes 1966 VDF S-500 L3000 $12500.00 0 Yes 21" 86" 2,800 3 1/8" Yes Swing Centers RPM Bar Cap. Threading
8728 LATHES, ENGINE VDF S-500 Very Good Yes VDF S-500 L3000 $37500.00 0 Yes 20" 240" 1,800 4" Yes Swing Centers RPM Bar Cap. Threading
8722 LATHES, ENGINE VDF 35" x 120" Good Yes VDF 35" x 120" L3000 $23500.00 0 Yes 35" 120" 1,000 3 3/4" Yes Swing Centers RPM Bar Cap. Threading
8790 LATHES, ENGINE VDF Boehringer 20" x 84" Good Yes VDF Boehringer 20" x 84" L3000 $12500.00 0 Yes 20" 84" 2,240 2.08" Yes Swing Centers RPM Bar Cap. Threading
7793 LATHES, ENGINE 1981 Wirth Model ARD Good Yes 1981 Wirth Model ARD L3000 $25000.00 0 Yes 32" 30" 500 12.204" Yes Swing Centers RPM Bar Cap. Threading
8217 LATHES, SECOND OPERATION 1977 Hardinge ASM-5C Good Yes 1977 Hardinge ASM-5C L4805 $8000.00 -1 Yes 12 3/4" 2 3/4" x 15" 4,200 1 3/8" 8 Swing Travels RPM Bar Cap. Stations
8230 LATHES, T TYPE 2000 Lansing CK64150 Fanuc 10T Very Good Yes 2000 Lansing CK64150 Fanuc 10T L5200 $87500.00 0 Yes 21.65" 17.32" x 32.28" 250 6 15/16" 16 Swing Travels RPM Bar Cap. Stations
8244 LATHES, TURRET - RAM TYPE 1965 Gisholt #5 Good Yes 1965 Gisholt #5 L6249 $10500.00 0 Yes 1 Swing Travels RPM Bar Cap. Stations
10026 LATHES, TURRET - RAM TYPE 1958 Warner and Swasey 3A M-1200 Good Yes 1958 Warner and Swasey 3A M-1200 L6249 $7500.00 -1 Yes 1 Swing Travels RPM Bar Cap. Stations
7925 LATHES, TURRET - RAM TYPE 1942/2000 Warner and Swasey 3A M-1200 Lot 288 Good Yes 15 3/8" Swing, SOC 7", Spindle Nose to Turret Face 26", 1,480 RPM, 7.5 HP, 6 position Turret, Collet Chuck, Coolant Pan and Pump, Haase Quick Change Tool Post, Rebuilt Seven (7) Years Ago 1942/2000 Warner and Swasey 3A M-1200 Lot 288 L6249 $5500.00 -1 Yes 1 Swing Travels RPM Bar Cap. Stations
8169 LATHES, TURRET - RAM TYPE 1957 Warner and Swasey 3A M-1200 Good Yes 15 3/8" Swing, SOC 7", Spindle Nose to Turret Face 26", 1,480 RPM, 7.5 HP, 6 position Turret, 8" 3-Jaw Chuck, Coolant Pan and Pump, Single Tool Post 1957 Warner and Swasey 3A M-1200 L6249 $7500.00 -1 Yes 1 Swing Travels RPM Bar Cap. Stations
8167 LATHES, TURRET - SADDLE TYPE Gisholt 1L Good Yes Gisholt 1L L6304 -1 Yes 1 Swing Travels RPM Bar Cap. Stations
8168 LATHES, TURRET - SADDLE TYPE Gisholt 1L Good Yes Gisholt 1L L6304 -1 Yes 1 Swing Travels RPM Bar Cap. Stations
7737 LATHES, TURRET - SADDLE TYPE 1964 Warner and Swasey 2A Good Yes 1964 Warner and Swasey 2A L6304 $19500.00 0 Yes 1 Swing Travels RPM Bar Cap. Stations
9524 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1997 Awea VP-2012 Fanuc OM Very Good Yes 1997 Awea VP-2012 Fanuc OM M0120 $76900.00 0 Yes 78.7" x 43.3" 78.7" x 47.2" x 30" 5,000 50 30 Table Travels RPM Taper ATC
8984 MACHINING CENTERS, GANTRY TYPE, NC-CNC 2001/03 Awea SP-3016 Fanuc 18MC Very Good Yes 2001/03 Awea SP-3016 Fanuc 18MC M0120 $239000.00 0 Yes 112" x 59" 120.5" x 63" x 30" 6,000 50 60 Table Travels RPM Taper ATC
10233 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1998 Cincinnati Sidewinder U5 Acramatic 950 Very Good Yes 1998 Cincinnati Sidewinder U5 Acramatic 950 M0120 $549000.00 0 Yes 137" x 67" 157" x 96" x 36" 6,000 50 60 Table Travels RPM Taper ATC
10620 MACHINING CENTERS, GANTRY TYPE, NC-CNC 2005 Haas GR-712 Haas 32 BIT Very Good Yes 2005 Haas GR-712 Haas 32 BIT M0120 $99000.00 0 Yes 144" x 72" 145" x 85" x 17" 15,000 40 10 Table Travels RPM Taper ATC
10223 MACHINING CENTERS, GANTRY TYPE, NC-CNC 2007 Haas GR-510 Haas 32 BIT Very Good Yes 122" x 53" Table, 121" x 61" x 11" Travels, 10,000 RPM, 40 Taper, 15 HP, 20 ATC, Remote Jog Handle, Auto Air Gun, Rigid Tapping, Coolant Tank, Quick Code, 1 Meg of Memory, Spindle Orientation, Visual Quick Code Programming, Auxiliary Home Button 2007 Haas GR-510 Haas 32 BIT M0120 0 Yes 122" x 53" 121" x 61" x 11" 10,000 40 20 Table Travels RPM Taper ATC
9836 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1987/2001 Ingersoll Masterhead Fanuc 150MB Good No 1987/2001 Ingersoll Masterhead Fanuc 150MB M0120 $295000.00 0 Yes 138" x 98" 160" x 120" x 39" 2,500 50 32 Table Travels RPM Taper ATC
8759 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1999 Ingersoll HVM Fanuc 15MB Very Good Yes 1999 Ingersoll HVM Fanuc 15MB M0120 $275000.00 0 Yes 196.7" x 98.4" 236.2" x 118.1" x 53.4" 24,000 63 60 Table Travels RPM Taper ATC
10585 MACHINING CENTERS, GANTRY TYPE, NC-CNC 2004 Johnford DMC-2100H Fanuc 18iMB Very Good Yes 2004 Johnford DMC-2100H Fanuc 18iMB M0120 $199000.00 0 Yes 86.6" x 59" 83" x 70" x 42" 10,000 40 24 Table Travels RPM Taper ATC
10409 MACHINING CENTERS, GANTRY TYPE, NC-CNC 2007 Johnford DMC-3100H Fanuc 18iMB Excellent Yes 2007 Johnford DMC-3100H Fanuc 18iMB M0120 $269900.00 0 Yes 126" x 59" 122" x 70" x 31.5" 6,000 50 40 Table Travels RPM Taper ATC
10434 MACHINING CENTERS, GANTRY TYPE, NC-CNC 2005 Johnford DMC-2100HN Fanuc 18iMB Very Good Yes 2005 Johnford DMC-2100HN Fanuc 18iMB M0120 $249500.00 0 Yes 86.6 " x 43.3" 82.7" x 51" x 31.5 15,000 HSK 100A 56 Table Travels RPM Taper ATC
7624 MACHINING CENTERS, GANTRY TYPE, NC-CNC 2001 Masco Bridgemax Fanuc 16i Very Good Yes 2001 Masco Bridgemax Fanuc 16i M0120 $399500.00 0 Yes 120" x 72" 185" x 100" x 50" 3,750 50 52 Table Travels RPM Taper ATC
9329 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1994 Mighty Comet VMC-3000C Mitsubishi Meldas 335MV Good Yes 1994 Mighty Comet VMC-3000C Mitsubishi Meldas 335MV M0120 $79500.00 0 Yes 122" x 47" 121" x 59" x 28" 3,800 50 40 Table Travels RPM Taper ATC
9166 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1998 Nicolas Correa Euro 2000 Fanuc 16iM Very Good Ye 1998 Nicolas Correa Euro 2000 Fanuc 16iM M0120 $79500.00 0 Yes 78.7" x 39.3" 78.7" x 49.21" x 25.5" 10,000 40 24 Table Travels RPM Taper ATC
10246 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1998 Okuma MCV-20A II OSP-7000M Very Good Yes 1998 Okuma MCV-20A II OSP-7000M M0120 $268000.00 0 Yes 110" x 59.06" 118" x 78.74" x 17.72" 4,000 50 24 Table Travels RPM Taper ATC
7361 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1999 SNK PM-6B Profiler Fanuc 15M Good Yes 133' x 120" Table, 132" Distance Between Columns, Travel of Each Gantry 97', 120' x 120" x 32" Travels, +/- 25° A & B, 7,000 RPM, 50 Taper, 40 HP, Twin Gantry Machine with Three (3) Spindle Each 1999 SNK PM-6B Profiler Fanuc 15M M0120 $2850000.00 0 Yes 133" x 120" 120" x 120" x 32" 7,000 50 Table Travels RPM Taper ATC
9302 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1997 Toshiba MPF-2140 Tosnuc 888 Very Good Yes 1997 Toshiba MPF-2140 Tosnuc 888 M0120 $489500.00 0 Yes 157.5" x 70.9" 157.5" x 82.7" x 23.6" 12,000 50 30 Table Travels RPM Taper ATC
9801 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1999 Toshiba MPE-2140 Tosnuc 888 Very Good Yes 1999 Toshiba MPE-2140 Tosnuc 888 M0120 $300000.00 0 Yes 157.5" x 70.9" 177" x 114" x 39" 3,000 50 120 Table Travels RPM Taper ATC
7347 MACHINING CENTERS, HORIZONTAL CNC 2010 Amera-Seiki A-50H Fanuc 18iMB Like New Yes 2010 Amera-Seiki A-50H Fanuc 18iMB M0130 $248000.00 -1 Yes 19.6" x 19.6" 360,000° 6,000 50 60 Pallets Indexing RPM Taper ATC
10390 MACHINING CENTERS, HORIZONTAL CNC 1995 Cincinnati T-30 Acramatic 950 Good Yes 2 - 31.5" x 31.5" Pallets, Full Contouring 4-Axis Pallets, 6,000 RPM, 50 HP, 90 ATC, 600 IPM, Through Spindle Coolant, Chip Conveyor, Spindle Probe, Tool Setting Probe, Automatic Pallet Changer With Load/Unload Station 1995 Cincinnati T-30 Acramatic 950 M0130 -1 Yes 31.5" x 31.5" 360,000° 6,000 50 90 Pallets Indexing RPM Taper ATC
10465 MACHINING CENTERS, HORIZONTAL CNC 1987 Cincinnati 10HC-2500A Acramatic Big Blue Good Yes 1987 Cincinnati 10HC-2500A Acramatic Big Blue M0130 $39500.00 0 Yes 104" x 32" 4,000 45 30 Pallets Indexing RPM Taper ATC
10217 MACHINING CENTERS, HORIZONTAL CNC 1997 Cincinnati Maxim-630 Acramatic 2100 YES 1997 Cincinnati Maxim-630 Acramatic 2100 M0130 $112000.00 -1 On Way 24.8" x 24.8" 360,000° 10,000 50 80 Pallets Indexing RPM Taper ATC
10524 MACHINING CENTERS, HORIZONTAL CNC 1987 Cincinnati 10HC-2500A Acramatic 900 Very Good Yes 1987 Cincinnati 10HC-2500A Acramatic 900 M0130 $32500.00 0 Yes 104" x 31" 0 6,000 50 30 Pallets Indexing RPM Taper ATC
9102 MACHINING CENTERS, HORIZONTAL CNC 1992 Cincinnati Maxim-500 Acramatic 950 Very Good No Two (2) 19.7" x 19.7" Pallets, 360,000° Indexing, 29.5" x 29.5" x 29.5" Travels, 33.5 HP, 7,000 RPM, 50 Taper, 40 ATC, Chip Conveyor, Coolant Through Spindle, Color Graphics, Full Tool Library, High Speed DNC, RS-232 Port, Floppy Drive, Pallet Wash Down, Pallet Wash Down, Renishaw Receiver, Thousands of Dollars In Spare Parts, Two (2) Extra Pallets 1992 Cincinnati Maxim-500 Acramatic 950 M0130 $30000.00 -1 Yes 19.7" x 19.7" 7,000 50 40 Pallets Indexing RPM Taper ATC
9059 MACHINING CENTERS, HORIZONTAL CNC 1995 Cincinnati Maxim-500 Acramatic 950 Good Yes 1995 Cincinnati Maxim-500 Acramatic 950 M0130 -1 On Way 19.7" x 19.7" 360,000° 7,000 50 40 Pallets Indexing RPM Taper ATC
10505 MACHINING CENTERS, HORIZONTAL CNC 1988 Cincinnati 10HC-2500A Fanuc 21iM Very Good Yes 1988 Cincinnati 10HC-2500A Fanuc 21iM M0130 $99000.00 0 Yes 104" x 31" 0 6,000 50 30 Pallets Indexing RPM Taper ATC
9784 MACHINING CENTERS, HORIZONTAL CNC 1997 Daewoo Ace-50H Fanuc 16M Good Yes 1997 Daewoo Ace-50H Fanuc 16M M0130 $42500.00 0 Yes 19.7" x 19.7" 360,000° 5,000 50 60 Pallets Indexing RPM Taper ATC
9783 MACHINING CENTERS, HORIZONTAL CNC 1996 Daewoo Ace-50H Fanuc 16M Good Yes 1996 Daewoo Ace-50H Fanuc 16M M0130 $45000.00 0 Yes 19.7" x 19.7" 6,000 50 60 Pallets Indexing RPM Taper ATC
9320 MACHINING CENTERS, HORIZONTAL CNC 2001 Daewoo DHP-630 Fanuc 16iMB Very Good Yes 2001 Daewoo DHP-630 Fanuc 16iMB M0130 $205000.00 -1 Yes 24.8" x 24.8" 360,000° 6,000 50 60 Pallets Indexing RPM Taper ATC
7936 MACHINING CENTERS, HORIZONTAL CNC 1997 Daewoo Ace H100 Fanuc 15M Good Yes 1997 Daewoo Ace H100 Fanuc 15M M0130 $295000.00 0 Yes 39.4" x 39.4" 4,500 50 92 Pallets Indexing RPM Taper ATC
7928 MACHINING CENTERS, HORIZONTAL CNC 1996 Daewoo Ace H100 Fanuc 15M Good Yes 39.4" Pallets, 1° Pallet Indexing, 78.70" x 49.70" x 39.40" Travels, 4,500 RPM, 50 Taper, 35 HP, 60 ATC, Coolant Through Spindle (300 psi), Turbo Chip Conveyor, Rigid Tapping, Shower Coolant, Spindle Chiller Unit, Remote Jog Handle, Two Speed Geared Headstock 1996 Daewoo Ace H100 Fanuc 15M M0130 $254000.00 0 Yes 39.4" x 39.4" 4,500 50 60 Pallets Indexing RPM Taper ATC
9686 MACHINING CENTERS, HORIZONTAL CNC 2004 Fortune H-630 Fanuc 18M Good Yes 2004 Fortune H-630 Fanuc 18M M0130 $109000.00 0 Yes 24.8" x 24.8" 4,500 50 60 Pallets Indexing RPM Taper ATC
8893 MACHINING CENTERS, HORIZONTAL CNC 2000 Giddings and Lewis HMC-410 Siemens 840D Good Yes 2000 Giddings and Lewis HMC-410 Siemens 840D M0130 $575000.00 0 Yes 62.9" x 62.9" 360,000° 4,000 50 60 Pallets Indexing RPM Taper ATC
10574 MACHINING CENTERS, HORIZONTAL CNC 2005 Haas EC-1600 Haas 32 BIT Very Good Yes 2005 Haas EC-1600 Haas 32 BIT M0130 $159000.00 0 Yes 64" x 32" 360,000° 6,000 50 30 Pallets Indexing RPM Taper ATC
10533 MACHINING CENTERS, HORIZONTAL CNC 2008 Haas EC-400 Haas 32 BIT Very Good Yes 2008 Haas EC-400 Haas 32 BIT M0130 $142000.00 0 Yes 15.75" x 15.75" 360,000° 8,000 40 24 Pallets Indexing RPM Taper ATC
10412 MACHINING CENTERS, HORIZONTAL CNC 2004 Haas EC-400 Haas 32 BIT Very Good Yes 2004 Haas EC-400 Haas 32 BIT M0130 $76000.00 0 Yes 15.75" x 15.75" 12,000 40 40 Pallets Indexing RPM Taper ATC
10185 MACHINING CENTERS, HORIZONTAL CNC 2007 Haas EC-3000 Haas 32 BIT Excellent Yes 2007 Haas EC-3000 Haas 32 BIT M0130 $220000.00 0 Yes 120" x 40" 6,000 50 30 Pallets Indexing RPM Taper ATC
10165 MACHINING CENTERS, HORIZONTAL CNC 1999 Haas HS-1RP Haas 32 BIT Very Good Yes 1999 Haas HS-1RP Haas 32 BIT M0130 $36500.00 0 Yes 16" x 16" 360,000° 7,500 40 24 Pallets Indexing RPM Taper ATC
10456 MACHINING CENTERS, HORIZONTAL CNC 2004 Haas EC-400 Haas 32 BIT Very Good Yes 2004 Haas EC-400 Haas 32 BIT M0130 $95000.00 0 Yes 15.75" x 15.75" 360,000° 12,000 40 60 Pallets Indexing RPM Taper ATC
10627 MACHINING CENTERS, HORIZONTAL CNC 1996 Haas HS-1RP Haas 32 BIT Good Yes 1996 Haas HS-1RP Haas 32 BIT M0130 $38000.00 -1 Yes 15.7" x 15.7" 360,000° 7,500 40 24 Pallets Indexing RPM Taper ATC
9097 MACHINING CENTERS, HORIZONTAL CNC 2000 Haas HS-2RP Haas 32 BIT Good Yes 2000 Haas HS-2RP Haas 32 BIT M0130 $49500.00 0 Yes 20" x 20" 360,000° 10,000 40 40 Pallets Indexing RPM Taper ATC
10216 MACHINING CENTERS, HORIZONTAL CNC 2006 Haas EC-400 Haas 32 BIT Very Good YES 2006 Haas EC-400 Haas 32 BIT M0130 $185000.00 0 On Way 15.75" x 15.75" 8,000 40 40 Pallets Indexing RPM Taper ATC
9617 MACHINING CENTERS, HORIZONTAL CNC 1999 Haas HS-1RP Haas 32 BIT Good Yes 1999 Haas HS-1RP Haas 32 BIT M0130 $34500.00 0 Yes 16" x 16" 360,000° 7,500 40 24 Pallets Indexing RPM Taper ATC
7869 MACHINING CENTERS, HORIZONTAL CNC 2000 Haas HS-1RP Haas 32 BIT Very Good Yes 16" x 16" Pallets, 24" x 20" x 22", 10,000 RPM, 40 Taper, 20 HP, 24 ATC, Chip Auger, RS-232 Port, Rigid Tapping, Coolant Through Spindle (300 PSI), Remote Jog Handle, 1 Meg Memory, Two (2) Kurt Vise Towers (8 positions each), Custom Macros, 3.5" Floppy Drive 2000 Haas HS-1RP Haas 32 BIT M0130 $58000.00 -1 Yes 16" x 16" 360,000° 10,000 40 24 Pallets Indexing RPM Taper ATC
7490 MACHINING CENTERS, HORIZONTAL CNC 1998 Hitachi-Seiki HS-630 Seicos Sigma 16M Very Good Yes Two 24.8" Pallets, 360,000° Indexing, 2,640 Lbs Table Load, 33.5" x 31.5" x 33.5" Travels, 10,000 RPM, 50 Taper, 40 HP, 60 ATC, Coolant Through Spindle, Synchronized Tapping, Helical Interpolation, Chip Conveyor, Remote Jog Handle 1998 Hitachi-Seiki HS-630 Seicos Sigma 16M M0130 $99000.00 -1 Yes 24.8" x 24.8" 360,000° 10,000 50 60 Pallets Indexing RPM Taper ATC
9702 MACHINING CENTERS, HORIZONTAL CNC 1985 Hitachi-Seiki HC-400 Fanuc 11M Needs Work Yes 1985 Hitachi-Seiki HC-400 Fanuc 11M M0130 -1 Yes 16" x 16" 6,000 40 50 Pallets Indexing RPM Taper ATC
8094 MACHINING CENTERS, HORIZONTAL CNC 2005 Kia KH-50G Fanuc 18iMB Very Good Yes 19.7" x 19.7" Pallets, Full 4th, 29.9" x 27.8" x 25.6" Travels, 8,000 RPM, 50 Taper, 18.5 HP, 60 ATC, Rigid Tapping, High Pressure Coolant Through Spindle, Chip Conveyor, Remote Jog Handle, Some Tool Holders, Machine Installed in 2007 2005 Kia KH-50G Fanuc 18iMB M0130 $145000.00 -1 Yes 19.7" x 19.7" 360,000° 8,000 50 60 Pallets Indexing RPM Taper ATC
8289 MACHINING CENTERS, HORIZONTAL CNC 1998 Kitamura H-400 Fanuc 15M Very Good Yes 1998 Kitamura H-400 Fanuc 15M M0130 $42000.00 0 Yes 15.7" x 15.7" 360,000° 10,000 40 100 Pallets Indexing RPM Taper ATC
9518 MACHINING CENTERS, HORIZONTAL CNC 1999 Kitamura HX-300 Fanuc 15M Very Good Yes 12" x 12" Pallets, Full 4th, 20.1" x 20.1" x 15.7" Travels, 10,000 RPM, 20 HP, 40 Taper, 40 ATC, 512K Memory, Expanded Macros, Coolant Through Spindle, Geared Head, New Spindle March in 2003, 200 Tool Offsets, Expanded Work Offsets, Low Hours Cutting Aluminum and Plastic 1999 Kitamura HX-300 Fanuc 15M M0130 $68000.00 -1 Yes 12" x 12" 360,000° 10,000 40 40 Pallets Indexing RPM Taper ATC
10173 MACHINING CENTERS, HORIZONTAL CNC 2005 Kitamura HX-630i Fanuc 16iMB Very Good Yes 2005 Kitamura HX-630i Fanuc 16iMB M0130 $199500.00 0 Yes 24.8" x 24.8" 360,000° 12,000 50 40 Pallets Indexing RPM Taper ATC
9218 MACHINING CENTERS, HORIZONTAL CNC 1998 Kitamura H-400 Fanuc 15M Good Yes 1998 Kitamura H-400 Fanuc 15M M0130 $39500.00 0 Yes 15.7" x 15.7" 360,000° 10,000 40 100 Pallets Indexing RPM Taper ATC
10363 MACHINING CENTERS, HORIZONTAL CNC 2006 Kitamura MyTrunnion 5AP Fanuc 16iMB Excellent Yes 2006 Kitamura MyTrunnion 5AP Fanuc 16iMB M0130 $345000.00 0 Yes 19.6" x 19.6" 360,000° 20,000 50 50 Pallets Indexing RPM Taper ATC
10313 MACHINING CENTERS, HORIZONTAL CNC 2001 Kitamura HX-400i Fanuc 16iM Good Yes 2001 Kitamura HX-400i Fanuc 16iM M0130 $99500.00 0 Yes 15.7" x 15.7" 360,000° 13,000 40 50 Pallets Indexing RPM Taper ATC
9695 MACHINING CENTERS, HORIZONTAL CNC 1992 Kitamura H-600 Fanuc 15M Good Yes 1992 Kitamura H-600 Fanuc 15M M0130 $59500.00 0 Yes 24.8" x 24.8" 360,000° 5,000 50 60 Pallets Indexing RPM Taper ATC
8326 MACHINING CENTERS, HORIZONTAL CNC 2001 Kiwa KNH-400 Fanuc 18iMA Very Good Yes 15.75" x 15.75" Pallets, 23.62" x 23.62" x 19.68" Travels, 10,000 RPM, 40 Taper, 25 HP, 64 ATC, Full 4th, High Pressure Coolant Through Spindle (1,000 psi), Remote Manual Pulse Generator, Chip Conveyor, Rigid Tapping 2001 Kiwa KNH-400 Fanuc 18iMA M0130 $115000.00 -1 Yes 15.75" x 15.75" 360,000° 10,000 40 64 Pallets Indexing RPM Taper ATC
10360 MACHINING CENTERS, HORIZONTAL CNC 1996 Kuraki KH-80 Fanuc 15M Good Yes 1996 Kuraki KH-80 Fanuc 15M M0130 $75000.00 0 Yes 31.5" x 31.5" 360,000° 6,000 50 40 Pallets Indexing RPM Taper ATC
8889 MACHINING CENTERS, HORIZONTAL CNC 2000 Kuraki KHM-125 Fanuc 16M Very Good Yes 2000 Kuraki KHM-125 Fanuc 16M M0130 $465000.00 0 Yes 49.2" x 49.2" 360,000° 8,000 50 60 Pallets Indexing RPM Taper ATC
7935 MACHINING CENTERS, HORIZONTAL CNC 1999 Makino MCB-1210 Fanuc 16M Pro3 Very Good Yes 1999 Makino MCB-1210 Fanuc 16M Pro3 M0130 $295000.00 0 Yes 39.4" x 39.4" 360,000° 15,000 50 60 Pallets Indexing RPM Taper ATC
10292 MACHINING CENTERS, HORIZONTAL CNC 1996 Makino A-55 Fanuc Pro 3 Good Yes 1996 Makino A-55 Fanuc Pro 3 M0130 $40000.00 0 Yes 15.74" x 15.74" 14,000 40 40 Pallets Indexing RPM Taper ATC
10214 MACHINING CENTERS, HORIZONTAL CNC 1999 Makino A-66 Makino Pro 3 Very Good Yes 1999 Makino A-66 Makino Pro 3 M0130 $96500.00 0 Yes 19.69" x 19.69" 14,000 40 40 Pallets Indexing RPM Taper ATC
10146 MACHINING CENTERS, HORIZONTAL CNC 2008 Makino A-82M Fanuc FS310is (Pro 5) Like New Yes 2008 Makino A-82M Fanuc FS310is (Pro 5) M0130 $520000.00 0 Yes 24.8" x 24.8" 360,000° 8,000 50 137 Pallets Indexing RPM Taper ATC
9272 MACHINING CENTERS, HORIZONTAL CNC 1999 Makino A-66 Fanuc 16iM Very Good Yes 1999 Makino A-66 Fanuc 16iM M0130 $99500.00 0 Yes 19.69" x 19.69" 360,000° 14,000 40 60 Pallets Indexing RPM Taper ATC
9851 MACHINING CENTERS, HORIZONTAL CNC 1995 Makino MC-98 Fanuc Pro 3 Good Yes 1995 Makino MC-98 Fanuc Pro 3 M0130 $129500.00 0 Yes 24.8" x 24.8" 360,000° 15,000 50 60 Pallets Indexing RPM Taper ATC
10516 MACHINING CENTERS, HORIZONTAL CNC 2001 Makino A-88 Fanuc Pro 3 Good Yes 2001 Makino A-88 Fanuc Pro 3 M0130 $199500.00 0 Yes 24.81" x 24.81" 35.4" x 31.5" x 38.2 50 132 Pallets Indexing RPM Taper ATC
9404 MACHINING CENTERS, HORIZONTAL CNC 1992 Makino A-55 Fanuc Pro 3 Very Good Yes 1992 Makino A-55 Fanuc Pro 3 M0130 $39500.00 0 Yes 15.74" x 15.74" 360,000° 12,000 40 40 Pallets Indexing RPM Taper ATC
9962 MACHINING CENTERS, HORIZONTAL CNC 2001 Makino A-55 E Fanuc Pro 3 Good Yes 2001 Makino A-55 E Fanuc Pro 3 M0130 $99500.00 0 Yes 15.74" x 15.74" 360,000° 14,000 63 40 Pallets Indexing RPM Taper ATC
8603 MACHINING CENTERS, HORIZONTAL CNC 2002 Makino A-66 Fanuc 16iM Good Yes 2002 Makino A-66 Fanuc 16iM M0130 $79500.00 0 Yes 19.69" x 19.69" 360,000° 14,000 63 40 Pallets Indexing RPM Taper ATC
9362 MACHINING CENTERS, HORIZONTAL CNC 1999 Makino MCB-1210 Fanuc 16M Pro3 Good Yes 1999 Makino MCB-1210 Fanuc 16M Pro3 M0130 $159000.00 -1 Yes 39.4" x 39.4" 360,000° 15,000 50 60 Pallets Indexing RPM Taper ATC
9976 MACHINING CENTERS, HORIZONTAL CNC 1987 Matsuura MC-900H 63 Fanuc 11M Very Good Yes 1987 Matsuura MC-900H 63 Fanuc 11M M0130 $38000.00 -1 Yes 23.62" x 23.62" 360,000° 4,500 50 100 Pallets Indexing RPM Taper ATC
9975 MACHINING CENTERS, HORIZONTAL CNC 1988 Matsuura MC-900H 63 Fanuc 11M Very Good Yes 1988 Matsuura MC-900H 63 Fanuc 11M M0130 $38000.00 -1 Yes 23.62" x 23.62" 360,000° 4,500 50 50 Pallets Indexing RPM Taper ATC
9974 MACHINING CENTERS, HORIZONTAL CNC 1988 Matsuura MC-900H 63 Fanuc 11M Very Good Yes 1988 Matsuura MC-900H 63 Fanuc 11M M0130 $38000.00 -1 Yes 23.62" x 23.62" 360,000° 4,500 50 50 Pallets Indexing RPM Taper ATC
9386 MACHINING CENTERS, HORIZONTAL CNC 1987 Mazak YMS-H25Q Mazatrol M-2 Very Good Yes 1987 Mazak YMS-H25Q Mazatrol M-2 M0130 $295000.00 0 Yes 118.11" x 64.17" 360,000° 2,600 50 80 Pallets Indexing RPM Taper ATC
10110 MACHINING CENTERS, HORIZONTAL CNC 2000 Mazak FH-8800 Mazatrol Fusion 640M Good Yes 2000 Mazak FH-8800 Mazatrol Fusion 640M M0130 $220000.00 -1 On Way 31.5" x 31.5" 7,000 50 80 Pallets Indexing RPM Taper ATC
9318 MACHINING CENTERS, HORIZONTAL CNC 1990 Mazak H-400 / 40N Mazatrol M-32 Very Good Yes 15.75" X 15.75" Pallets, 1° Indexing, 22" x 18" x 20", 7,000 RPM, 40 Taper, 12 HP, 30 ATC, Coolant Through Spindle, Chip Conveyor, Chiller Unit, RS-232C Port 1990 Mazak H-400 / 40N Mazatrol M-32 M0130 $26000.00 0 Yes 15.75" x 15.75" 7,000 40 30 Pallets Indexing RPM Taper ATC
10257 MACHINING CENTERS, HORIZONTAL CNC 1997 Mazak FH-680 Mazatrol M-Plus Very Good Yes 1997 Mazak FH-680 Mazatrol M-Plus M0130 $119500.00 0 Yes 24.8" x 24.8" 360,000° 10,000 50 80 Pallets Indexing RPM Taper ATC
9074 MACHINING CENTERS, HORIZONTAL CNC 2001 Mazak FH-4800 Mazatrol Fusion 640M Good Yes 2001 Mazak FH-4800 Mazatrol Fusion 640M M0130 $119500.00 0 Yes 15.75" x 15.75" 12,000 40 40 Pallets Indexing RPM Taper ATC
10416 MACHINING CENTERS, HORIZONTAL CNC 2001 Mazak FH-4800 Mazatrol Fusion 640M Good Yes 2001 Mazak FH-4800 Mazatrol Fusion 640M M0130 $142500.00 0 Yes 15.75" x 15.75" 25,000 40 80 Pallets Indexing RPM Taper ATC
10418 MACHINING CENTERS, HORIZONTAL CNC 2002 Mazak PFH-4800 Mazatrol Fusion 640M Good Yes 2002 Mazak PFH-4800 Mazatrol Fusion 640M M0130 $124500.00 0 Yes 15.75" x 15.75" 360,000° 12,000 40 40 Pallets Indexing RPM Taper ATC
9742 MACHINING CENTERS, HORIZONTAL CNC 1986 Mazak H-400 / 40N Mazatrol M-2 Good Yes 1986 Mazak H-400 / 40N Mazatrol M-2 M0130 $19500.00 -1 On Way 15.75" x 15.75" 7,000 40 30 Pallets Indexing RPM Taper ATC
10142 MACHINING CENTERS, HORIZONTAL CNC 2004 Mazak PFH-5800 Mazatrol Fusion 640 M Very Good Yes 2004 Mazak PFH-5800 Mazatrol Fusion 640 M M0130 $239500.00 0 Yes 19.68" x 19.68" 12,000 40 80 Pallets Indexing RPM Taper ATC
10232 MACHINING CENTERS, HORIZONTAL CNC 1996 Mitsubishi M-H100C Mitsubishi 520M Very Good Yes 1996 Mitsubishi M-H100C Mitsubishi 520M M0130 $189500.00 0 Yes 39.4" x 39.4" 360,000° 4,000 50 80 Pallets Indexing RPM Taper ATC
9980 MACHINING CENTERS, HORIZONTAL CNC 1994 Mitsubishi M-H80D Mitsubishi 300 Good Yes 1994 Mitsubishi M-H80D Mitsubishi 300 M0130 $75000.00 -1 Yes 31.5" x 31.5" 360,000° 4,000 50 80 Pallets Indexing RPM Taper ATC
9865 MACHINING CENTERS, HORIZONTAL CNC 1992 Mitsui-Seiki HT-3A Fanuc 15M Good Yes 1992 Mitsui-Seiki HT-3A Fanuc 15M M0130 $22500.00 -1 Yes 15.75" x 15.75" 360,000° 12,000 40 90 Pallets Indexing RPM Taper ATC
10357 MACHINING CENTERS, HORIZONTAL CNC 1993 Mitsui-Seiki JIDIC-H6C Fanuc 15M Very Good Yes 1993 Mitsui-Seiki JIDIC-H6C Fanuc 15M M0130 $375000.00 -1 Yes 31.5" x 31.5" 360,000° 3,150 50 120 Pallets Indexing RPM Taper ATC
8964 MACHINING CENTERS, HORIZONTAL CNC 2000 Mitsui-Seiki HU-63A Fanuc 16M Very Good Yes 2000 Mitsui-Seiki HU-63A Fanuc 16M M0130 $89500.00 0 Yes 24.8" x 24.8" 10,000 50 90 Pallets Indexing RPM Taper ATC
9406 MACHINING CENTERS, HORIZONTAL CNC 1996 Mitsui-Seiki HT-3A Fanuc 15MA Very Good Yes 1996 Mitsui-Seiki HT-3A Fanuc 15MA M0130 $49500.00 0 Yes 15.75" x 15.75" 360,000° 20,000 40 90 Pallets Indexing RPM Taper ATC
8982 MACHINING CENTERS, HORIZONTAL CNC 1984 Mitsui-Seiki HR-7A Fanuc 6MB Good Yes 1984 Mitsui-Seiki HR-7A Fanuc 6MB M0130 $59900.00 -1 Yes 51.2" x 51.2" 360,000° 3,150 50 60 Pallets Indexing RPM Taper ATC
10356 MACHINING CENTERS, HORIZONTAL CNC 1999 Mitsui-Seiki HJ-100A Fanuc 15M Very Good Yes 1999 Mitsui-Seiki HJ-100A Fanuc 15M M0130 $380000.00 -1 Yes 31.5" x 31.5" 360,000° 8,000 50 240 Pallets Indexing RPM Taper ATC
10354 MACHINING CENTERS, HORIZONTAL CNC 1996 Mori-Seiki SH-50 Fanuc 16M Very Good Yes 1996 Mori-Seiki SH-50 Fanuc 16M M0130 $60000.00 0 Yes 19.7" x 19.7" 12,000 40 60 Pallets Indexing RPM Taper ATC
8956 MACHINING CENTERS, HORIZONTAL CNC 1987 Mori-Seiki MH-50 Fanuc 18M Needs Repair Yes 1987 Mori-Seiki MH-50 Fanuc 18M M0130 -1 Yes 19.7" x 19.7" 360,000° 6,000 50 40 Pallets Indexing RPM Taper ATC
10592 MACHINING CENTERS, HORIZONTAL CNC 1994 Mori-Seiki MH-63 Fanuc 16M Good Yes 1994 Mori-Seiki MH-63 Fanuc 16M M0130 $189900.00 0 Yes 24.8" x 24.8" 6,000 50 60 Pallets Indexing RPM Taper ATC
10413 MACHINING CENTERS, HORIZONTAL CNC 2008 Mori-Seiki NH-4000 DCG Mori-Seiki MSG-501 Very Good Yes 2008 Mori-Seiki NH-4000 DCG Mori-Seiki MSG-501 M0130 $272000.00 0 Yes 15.75" x 15.75" 360,000° 14,000 40 120 Pallets Indexing RPM Taper ATC
10280 MACHINING CENTERS, HORIZONTAL CNC 1995 Mori-Seiki SH-50 Fanuc 16M Good Yes 1995 Mori-Seiki SH-50 Fanuc 16M M0130 $69500.00 0 Yes 19.7" x 19.7" 12,000 40 40 Pallets Indexing RPM Taper ATC
9411 MACHINING CENTERS, HORIZONTAL CNC 1995 Mori-Seiki SH-50 Mitsubishi MSC-516 Good Yes 1995 Mori-Seiki SH-50 Mitsubishi MSC-516 M0130 $55000.00 0 Yes 19.7" x 19.7" 12,000 40 40 Pallets Indexing RPM Taper ATC
10106 MACHINING CENTERS, HORIZONTAL CNC 1996 Mori-Seiki SH-63 Fanuc 16M Good Yes 24.8" x 24.8" Pallets, 33.07" x 29.92" x 33.07" Travels, 15,000 RPM, 50 Taper, 40 HP, 120 ATC, Chip Conveyor, Shower Coolant 1996 Mori-Seiki SH-63 Fanuc 16M M0130 $130000.00 -1 Yes 24.8" x 24.8" 15,000 50 120 Pallets Indexing RPM Taper ATC
9970 MACHINING CENTERS, HORIZONTAL CNC 1997 Mori-Seiki SH-63 Fanuc 160iM Good Yes 1997 Mori-Seiki SH-63 Fanuc 160iM M0130 $65000.00 0 Yes 24.8" x 24.8" 10,000 50 60 Pallets Indexing RPM Taper ATC
10439 MACHINING CENTERS, HORIZONTAL CNC 2000 Mori-Seiki SH-503 / 40 Moric MSG-502 Very Good Yes 2000 Mori-Seiki SH-503 / 40 Moric MSG-502 M0130 $175000.00 0 Yes 19.7" x 19.7" 360,000° 12,000 40 60 Pallets Indexing RPM Taper ATC
10281 MACHINING CENTERS, HORIZONTAL CNC 1996 Niigata SPN-50 Fanuc 16M Good Yes 1996 Niigata SPN-50 Fanuc 16M M0130 $67500.00 0 Yes 19.7" x 19.7" 360,000° 12,000 50 178 Pallets Indexing RPM Taper ATC
9410 MACHINING CENTERS, HORIZONTAL CNC 1997 Niigata HN-50C Fanuc 15M Good Yes 1997 Niigata HN-50C Fanuc 15M M0130 $69500.00 0 No 19.7" x 19.7" 6,500 50 120 Pallets Indexing RPM Taper ATC
8959 MACHINING CENTERS, HORIZONTAL CNC 1995 Niigata SPN-50 Fanuc 16M Very Good Yes 1995 Niigata SPN-50 Fanuc 16M M0130 $79500.00 -1 Yes 19.7" x 19.7" 360,000° 12,000 50 178 Pallets Indexing RPM Taper ATC
8017 MACHINING CENTERS, HORIZONTAL CNC 1997 Niigata SPN-40 Fanuc 16iM Very Good Yes 1997 Niigata SPN-40 Fanuc 16iM M0130 $49500.00 0 Yes 15.7" x 15.7" 12,000 40 60 Pallets Indexing RPM Taper ATC
9711 MACHINING CENTERS, HORIZONTAL CNC 2000 Niigata HN-63C Fanuc 16iM Very Good Yes 2000 Niigata HN-63C Fanuc 16iM M0130 $115000.00 0 Yes 24.8" X 24.8" 360,000° 6,500 50 60 Pallets Indexing RPM Taper ATC
8983 MACHINING CENTERS, HORIZONTAL CNC 2000 Niigata HN-80C Fanuc 18iM Very Good Yes 2000 Niigata HN-80C Fanuc 18iM M0130 $299000.00 0 Yes 31.5" x 31.5" 360,000° 12,000 50 126 Pallets Indexing RPM Taper ATC
10336 MACHINING CENTERS, HORIZONTAL CNC 1993 Niigata HN-80C Fanuc 15MA Good Yes 1993 Niigata HN-80C Fanuc 15MA M0130 $250000.00 0 Yes 31.5" x 31.5" 360,000° 6,000 50 240 Pallets Indexing RPM Taper ATC
9405 MACHINING CENTERS, HORIZONTAL CNC 2003 OKK HM-80S Fanuc 160iM Very Good Yes 2003 OKK HM-80S Fanuc 160iM M0130 $275000.00 0 Yes 31.49" x 31.49" 360,000° 12,000 50 116 Pallets Indexing RPM Taper ATC
9300 MACHINING CENTERS, HORIZONTAL CNC 2001 OKK HM-60 Fanuc 16i Good Yes 2001 OKK HM-60 Fanuc 16i M0130 $99500.00 0 Yes 23.6" x 23.6" 360,000° 8,000 50 40 Pallets Indexing RPM Taper ATC
9274 MACHINING CENTERS, HORIZONTAL CNC 1997 OKK HM-40 OKK NeoMatic 530 Very Good Yes 1997 OKK HM-40 OKK NeoMatic 530 M0130 $59000.00 0 Yes 15.75" x 15.75" 10,000 40 40 Pallets Indexing RPM Taper ATC
10438 MACHINING CENTERS, HORIZONTAL CNC 1999 OKK HN-80C Fanuc 16iM Good Yes 1999 OKK HN-80C Fanuc 16iM M0130 $139000.00 0 Yes 31.5" X 31.5" 8,000 50 40 Pallets Indexing RPM Taper ATC
9778 MACHINING CENTERS, HORIZONTAL CNC 1999 OKK HM-80S Fanuc 160iM Good Yes 1999 OKK HM-80S Fanuc 160iM M0130 $149500.00 0 Yes 31.49" x 31.49" 12,000 50 40 Pallets Indexing RPM Taper ATC
10500 MACHINING CENTERS, HORIZONTAL CNC 1999 OKK HM-80S Fanuc 16iM Good Yes 1999 OKK HM-80S Fanuc 16iM M0130 $129500.00 0 Yes 31.49" X 31.49" 8,000 40 40 Pallets Indexing RPM Taper ATC
8181 MACHINING CENTERS, HORIZONTAL CNC 2007 OKK HP-500 S Fanuc I80i SMB Excellent Yes 2007 OKK HP-500 S Fanuc I80i SMB M0130 $310000.00 0 Yes 19.69" x 19.69" 360,000° 15,000 40 162 Pallets Indexing RPM Taper ATC
9979 MACHINING CENTERS, HORIZONTAL CNC 1994 Okuma MC-500H OSP-5020M Good Yes 1994 Okuma MC-500H OSP-5020M M0130 $25000.00 -1 Yes 19.69" x 19.69" 360,000° 5,000 50 40 Pallets Indexing RPM Taper ATC
8323 MACHINING CENTERS, HORIZONTAL CNC 2001 Okuma and Howa Millac 550H Fanuc 16iM Very Good Yes 19.68" x 19.68" Pallets, 31.5" x 31.5" x 27.5" Travels, 10,000 RPM, 50 Taper, 40 HP, 60 ATC, Full 4th, High Pressure Coolant Through Spindle (1,000 psi), Hydraulics Plumbed To Each Pallet For Work Holding Fixtures, Chip Conveyor, 5,500 Cutting Hours, Cutting Only Aluminum 2001 Okuma and Howa Millac 550H Fanuc 16iM M0130 $159000.00 -1 Yes 19.68" x 19.68" 360,000° 10,000 50 60 Pallets Indexing RPM Taper ATC
9408 MACHINING CENTERS, HORIZONTAL CNC 1997 Saeilo Mach 4 Fanuc 21iM Very Good Yes 1997 Saeilo Mach 4 Fanuc 21iM M0130 $24500.00 0 Yes 15.7" x 15.7" 360,000° 8,000 40 20 Pallets Indexing RPM Taper ATC
10006 MACHINING CENTERS, HORIZONTAL CNC 1989 Scharmann Salon 2 Yes 1989 Scharmann Salon 2 M0130 -1 On Way 31.5" x 24.6" 360,000° 3,500 50 80 Pallets Indexing RPM Taper ATC
9111 MACHINING CENTERS, HORIZONTAL CNC 2007 SNK HPS-120B-5 Fanuc 31iA-5 Excellent Yes 2007 SNK HPS-120B-5 Fanuc 31iA-5 M0130 $700000.00 0 Yes 120" x 48" 360,000° 15,000 50 60 Pallets Indexing RPM Taper ATC
9573 MACHINING CENTERS, HORIZONTAL CNC 2001 SNK HPS-120B-5 Fanuc 15iM Very Good Yes 2001 SNK HPS-120B-5 Fanuc 15iM M0130 $525000.00 0 Yes 120" x 48" 12,000 50 40 Pallets Indexing RPM Taper ATC
9273 MACHINING CENTERS, HORIZONTAL CNC 1998 Starrag-Heckert CWK-400 Fanuc 16iM Very Good Yes 1998 Starrag-Heckert CWK-400 Fanuc 16iM M0130 $99500.00 0 Yes 16" x 16" 360,000° 10,000 40 60 Pallets Indexing RPM Taper ATC
9978 MACHINING CENTERS, HORIZONTAL CNC 1984 Toshiba BMC-80E Tosnuc 600M Good Yes 1984 Toshiba BMC-80E Tosnuc 600M M0130 $65000.00 -1 Yes 31.5" x 31.5" 360,000° 5,000 50 60 Pallets Indexing RPM Taper ATC
10344 MACHINING CENTERS, HORIZONTAL CNC 2001 Toyoda FA-550 II Fanuc 16i Good Yes 2001 Toyoda FA-550 II Fanuc 16i M0130 $79500.00 0 Yes 21.65" x 21.65" 6,000 50 120 Pallets Indexing RPM Taper ATC
10461 MACHINING CENTERS, HORIZONTAL CNC 2008 Toyoda FA-630 RGV Fanuc 16iMB Excellent Yes 2008 Toyoda FA-630 RGV Fanuc 16iMB M0130 $599500.00 0 Yes 24.8" x 24.8" 360,000° 6,000 50 190 Pallets Indexing RPM Taper ATC
9634 MACHINING CENTERS, HORIZONTAL CNC 1997 Toyoda FA-550 II Fanuc 15MB Very Good Yes Six (6) 21.65" Pallet, Full 4th, 29.52" x 29.52" x 23.62" Travels, 6,000 RPM, 50 Taper, 40 HP, 120 ATC, Coolant Through Spindle, Helical Interpolation, Rigid Tapping, Chip Conveyor, Toyoda Touch Sensor Function, Barnes Kleenal Chip Filter, Program Data Input 1997 Toyoda FA-550 II Fanuc 15MB M0130 $159500.00 0 Yes 21.65" x 21.65" 360,000° 6,000 50 120 Pallets Indexing RPM Taper ATC
8629 MACHINING CENTERS, VERTICAL, CNC 2009 Amera-Seiki VX5-3 Fanuc 31iMA New No 2009 Amera-Seiki VX5-3 Fanuc 31iMA M0185 $799900.00 -1 Yes 128" x 31.5" 118" x 39.4" x 29.5" 12,000 50 32 Table Travels RPM Taper ATC
7990 MACHINING CENTERS, VERTICAL, CNC 2010 Amera-Seiki A-5 Fanuc OiMC New Yes 2010 Amera-Seiki A-5 Fanuc OiMC M0185 $193700.00 -1 Yes 67" x 32" 63" x 31.5" x 27.5" 6,000 50 32 Table Travels RPM Taper ATC
7345 MACHINING CENTERS, VERTICAL, CNC 2006 Amera-Seiki A-1 APC Mitsubishi 64SM Like New Yes 2006 Amera-Seiki A-1 APC Mitsubishi 64SM M0185 $56000.00 -1 Yes 22" x 15.75" 20.15" x 14.20" x 17.7" 10,000 30 21 Table Travels RPM Taper ATC
10485 MACHINING CENTERS, VERTICAL, CNC 2005 Amera-Seiki A-4 Fanuc 21iMB Very Good Yes 2005 Amera-Seiki A-4 Fanuc 21iMB M0185 $69900.00 0 Yes 44" x 22" 51" x 27.5" x 28" 8,000 40 25 Table Travels RPM Taper ATC
10582 MACHINING CENTERS, VERTICAL, CNC 2008 Amera-Seiki A-3 Fanuc OiMC Like New Yes 2008 Amera-Seiki A-3 Fanuc OiMC M0185 $74500.00 0 Yes 44" x 22" 43" x 22" x 22" 12,000 40 24 Table Travels RPM Taper ATC
9539 MACHINING CENTERS, VERTICAL, CNC 1998 Bostomatic BD-405 Bostomatic MDSI Control Very Good Yes 1998 Bostomatic BD-405 Bostomatic MDSI Control M0185 $60000.00 0 Yes 48" x 14" 20" x 9" x 15" 10,000 30 15 Table Travels RPM Taper ATC
7721 MACHINING CENTERS, VERTICAL, CNC 1998 Bostomatic 605 Bostomatic BDC-3200X Good Yes 1998 Bostomatic 605 Bostomatic BDC-3200X M0185 $229000.00 0 Yes 47.24" x 20.08" 40.10" x 22.05" x 22.05" 8,000 63 15 Table Travels RPM Taper ATC
9540 MACHINING CENTERS, VERTICAL, CNC 1998 Bostomatic BD-505 Bostomatic BDC-3200X Very Good Yes 1998 Bostomatic BD-505 Bostomatic BDC-3200X M0185 $102000.00 0 Yes 76" x 16" 40" x 12.5" x 17" 10,000 63 18 Table Travels RPM Taper ATC
8044 MACHINING CENTERS, VERTICAL, CNC 1990 Butler Elgamill HE 28363 Heidenhain 355 Good Yes 315" x 32" Table, 244" x 65" x 38" Travels, A-Axis Travel 130,000°, B-Axis Travel 360,000°, 3,000 RPM, 50 Taper, 29.5 HP, 40 ATC, Chip Conveyor, Full CNC Controlled Swivel Head, Power Draw Bar 1990 Butler Elgamill HE 28363 Heidenhain 355 M0185 $219500.00 -1 Yes 315" x 32" 244" x 65" x 38" 3,000 50 40 Table Travels RPM Taper ATC
7566 MACHINING CENTERS, VERTICAL, CNC 1994 Cincinnati Sabre-1000 Acramatic 850 SX Good Yes 44" x 20" Table, 40" x 20" x 22", 8,000 RPM, 40 Taper, 21 ATC, 945 IPM 1994 Cincinnati Sabre-1000 Acramatic 850 SX M0185 $24500.00 0 Yes 44" x 20" 40" x 20" x 22" 8,000 40 21 Table Travels RPM Taper ATC
9918 MACHINING CENTERS, VERTICAL, CNC 1998 Cincinnati Sabre-1500 Acramatic 2100 Good Yes 1998 Cincinnati Sabre-1500 Acramatic 2100 M0185 $28000.00 -1 Yes 64" x 30" 60" x 30" x 32" 8,000 40 42 Table Travels RPM Taper ATC
8761 MACHINING CENTERS, VERTICAL, CNC 1996 Cincinnati Sabre-1500 Acramatic 2100 Very Good Yes 1996 Cincinnati Sabre-1500 Acramatic 2100 M0185 $39500.00 0 Yes 64" x 30" 60" x 30" x 32" 8,000 40 42 Table Travels RPM Taper ATC
9568 MACHINING CENTERS, VERTICAL, CNC 1996 Cincinnati Sabre-1500 Acramatic 2100 Very Good Yes 1996 Cincinnati Sabre-1500 Acramatic 2100 M0185 $34900.00 0 Yes 64" x 30" 60" x 30" x 32" 10,000 40 21 Table Travels RPM Taper ATC
7567 MACHINING CENTERS, VERTICAL, CNC 1991 Cincinnati Sabre-1250 Acramatic 850 SX Good Yes 1991 Cincinnati Sabre-1250 Acramatic 850 SX M0185 $39500.00 0 NO 54" x 26" 49.2" x 25.6" x 25.6" 8,000 40 21 Table Travels RPM Taper ATC
9016 MACHINING CENTERS, VERTICAL, CNC 2000 Cincinnati Lancer V-5 2000 Acramatic 2100 Very Good Yes 2000 Cincinnati Lancer V-5 2000 Acramatic 2100 M0185 $155000.00 0 Yes 90" x 30.1" 80" x 30" x 30" 15,000 63 21 Table Travels RPM Taper ATC
9445 MACHINING CENTERS, VERTICAL, CNC 1993 Cincinnati Sabre-750 Acramatic 850 SX Needs Minor Repair No 34" x 20" Table, 8,000 RPM, 15 HP, 40 Taper, 21 ATC, Coolant Through Spindle, Rigid Tapping, High Torque Carrier, Manuals, Needs New Keyboard 1993 Cincinnati Sabre-750 Acramatic 850 SX M0185 $8000.00 -1 Yes 34" x 20" 29.94" x 20.07" x 22.05" 5,000 40 21 Table Travels RPM Taper ATC
9204 MACHINING CENTERS, VERTICAL, CNC 1985/06 Cincinnati 20V-80 Centroid M 400 Very Good Yes 84.05" x 29.92" Table, 78.74" x 29.94" x 24" Travels, +/- 25° A / B Travels, 3,600 RPM, 50 Taper, 25 HP, Coolant System, Full Five Axis Control, Machine Retrofitted With New Servos and Centroid Control in 2007 1985/06 Cincinnati 20V-80 Centroid M 400 M0185 $165000.00 -1 On Way 84.05"x 29.92" 78.74" x 29.94" x 24" 3,600 50 Table Travels RPM Taper ATC
9203 MACHINING CENTERS, VERTICAL, CNC 1989/2007 Cincinnati 20V-120 Centroid M 400 Very Good Yes 122" x 29.92" Table, 120" x 30" x 24" Travels, +/- 29° A / B Travels, 3,600 RPM, 50 Taper, 25 HP, Coolant System, Full Five Axis Control, Machine Retrofitted With New Servos and Centroid Control in 2007 1989/2007 Cincinnati 20V-120 Centroid M 400 M0185 $185000.00 -1 Yes 122" x 29.92" 120" x 30" x 24" 3,600 50 Table Travels RPM Taper ATC
9446 MACHINING CENTERS, VERTICAL, CNC 1995 Cincinnati Arrow-500 Acramatic Series F Needs Minor Repair No 27.5" x 20.5" Table, 20" x 20" x 20" Travels, 6,000 RPM, 15 HP, 40 Taper, 21 ATC, RS-232 Port, Manuals, Rigid Tapping, Needs New Power Supply 1995 Cincinnati Arrow-500 Acramatic Series F M0185 $8000.00 -1 Yes 27.5" x 20.5" 20.07" x 20.07" x 20.07" 6,000 40 21 Table Travels RPM Taper ATC
10449 MACHINING CENTERS, VERTICAL, CNC 2005 Daewoo DMV-5025 Fanuc 21iM Very Good Yes 2005 Daewoo DMV-5025 Fanuc 21iM M0185 $75000.00 -1 Yes 55.1" x 25.6" 51" x 25.5" x 24.6" 12,000 40 24 Table Travels RPM Taper ATC
10542 MACHINING CENTERS, VERTICAL, CNC 2005 Daewoo DMV-3016 LD Fanuc 0iMB Very Good Yes 2005 Daewoo DMV-3016 LD Fanuc 0iMB M0185 $49900.00 0 Yes 36.2" x 16.9" 30" x 16.1" 20.1" 8,000 40 20 Table Travels RPM Taper ATC
10419 MACHINING CENTERS, VERTICAL, CNC 1990 Dah Lih MCV-2100 Fanuc 11M Good Yes 1990 Dah Lih MCV-2100 Fanuc 11M M0185 $26500.00 -1 On Way 90.5" x 31.5" 82.7" x 33.5" x 29.9" 3,500 50 32 Table Travels RPM Taper ATC
8760 MACHINING CENTERS, VERTICAL, CNC 2001 Enshu EV-650 Yasnac J-300M Excellent Yes 78.7" x 25.6" Table, 63" x 25.6" x 25.6" Travels, 6,000 RPM, 20 HP, 50 Taper, 30 ATC, High Speed Milling Option, Chip Conveyor, DNC Port, Tool Life Management, Remote Jog Handle, Tool Length Measurement, 4th Axis Ready 2001 Enshu EV-650 Yasnac J-300M M0185 $99500.00 0 Yes 78.7" x 25.6" 63" x 26.6" x 26" 6,000 50 30 Table Travels RPM Taper ATC
10378 MACHINING CENTERS, VERTICAL, CNC 2006 Fadal VMC-4020 HT Fadal Multi-Processor CNC Very Good Yes 47" x 20" Table, 40" x 20" x 28" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 30 ATC, Rigid Tapping, High Torque, Graphics, 422 K Memory, Cool Power 2006 Fadal VMC-4020 HT Fadal Multi-Processor CNC M0185 $51500.00 0 Yes 47" x 20" 40" x 20" x 20" 10,000 40 24 Table Travels RPM Taper ATC
10063 MACHINING CENTERS, VERTICAL, CNC 2004 Fadal VMC-8030 HT Fadal 32MP CNC Good Yes 82.5" x 30" Table, 80" x 30" x 30" Travels, 10,000 RPM, 22.5 HP, 40 Taper, 21 ATC, Coolant Through Spindle, Rigid Tapping, Remote Jog Handle, High Torque Motor, Coolant System, Chip Conveyor 2004 Fadal VMC-8030 HT Fadal 32MP CNC M0185 $74500.00 0 Yes 82.5" x 30" 80" x 30" x 30" 10,000 40 21 Table Travels RPM Taper ATC
10623 MACHINING CENTERS, VERTICAL, CNC 2007 Fadal VMC-4020 FX Fanuc OiMC Very Good Yes 2007 Fadal VMC-4020 FX Fanuc OiMC M0185 $69900.00 0 Yes 47.94" x 20" 40" x 20" x 28" 10,000 40 21 Table Travels RPM Taper ATC
10606 MACHINING CENTERS, VERTICAL, CNC 1997 Fadal VMC-8030 HT Fadal 88HS Very Good Yes 82.5" x 30" Table, 80" x 30" x 30" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 21 ATC, Coolant System, High Torque, Coolant System, Remote Jog Handle 1997 Fadal VMC-8030 HT Fadal 88HS M0185 $86500.00 0 Yes 82.5" x 30" 80" x 30" x 30" 10,000 40 21 Table Travels RPM Taper ATC
10601 MACHINING CENTERS, VERTICAL, CNC 1997 Fadal VMC-6030 HT Fadal 88HS Good Yes 1997 Fadal VMC-6030 HT Fadal 88HS M0185 $39500.00 0 Yes 62.5" x 30" 60" x 30" x 30" 10,000 40 21 Table Travels RPM Taper ATC
9014 MACHINING CENTERS, VERTICAL, CNC 1999 Fadal VMC-6030 Fadal 32MP CNC Good Yes 1999 Fadal VMC-6030 Fadal 32MP CNC M0185 $54900.00 0 Yes 62.5" x 30" 60" x 30" x 30" 10,000 40 30 Table Travels RPM Taper ATC
10562 MACHINING CENTERS, VERTICAL, CNC 1996 Fadal VMC-15 XT Fadal 88HS Good Yes 1996 Fadal VMC-15 XT Fadal 88HS M0185 0 Yes 38.5" x 16" 30" x 16" x 28" 7,500 40 15 Table Travels RPM Taper ATC
8884 MACHINING CENTERS, VERTICAL, CNC 2004 Fadal VMC-8030 Fadal 32MP CNC Very Good Yes 82.5" x 30" Table, 80" x 30" x 30" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 24 Side Mount ATC, Rigid Tapping, RS-232 Port, Coolant System, 8 MB Expanded Memory, Tsudokoma RN-320R Rotary Table With Tailstock, Remote Jog Handle, New Spindle, 7,500 Power On Hours 2004 Fadal VMC-8030 Fadal 32MP CNC M0185 $95000.00 -1 Yes 82.5" x 30" 80" x 30" x 30" 10,000 40 24 Table Travels RPM Taper ATC
9739 MACHINING CENTERS, VERTICAL, CNC 1998 Fadal VMC-5020A Fadal 88HS Good Yes 1998 Fadal VMC-5020A Fadal 88HS M0185 $34500.00 0 Yes 58" x 20" 50" x 20" x 28" 7,500 40 21 Table Travels RPM Taper ATC
9748 MACHINING CENTERS, VERTICAL, CNC 1986 Fadal VMC-4020 Fadal 88HS Good Yes 1986 Fadal VMC-4020 Fadal 88HS M0185 $18500.00 -1 Yes 47.94" x 20" 40" x 20" x 18" 10,000 40 21 Table Travels RPM Taper ATC
10430 MACHINING CENTERS, VERTICAL, CNC 2007 Fadal VMC-4020 HT Fanuc 18i Very Good Yes 47" x 20" Table, 40" x 20" x 28" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 24 ATC, Rigid Tapping, High Torque, Coolant System, Cool Power, Extended Z-Travel 2007 Fadal VMC-4020 HT Fanuc 18i M0185 $59900.00 0 Yes 47" x 20" 40" x 20" x 28" 10,000 40 24 Table Travels RPM Taper ATC
10410 MACHINING CENTERS, VERTICAL, CNC 1993 Fadal VMC-6030 HT Fadal 88HS Good Yes 1993 Fadal VMC-6030 HT Fadal 88HS M0185 $34500.00 0 Yes 62.5" x 30" 60" x 30" x 30" 10,000 40 21 Table Travels RPM Taper ATC
10163 MACHINING CENTERS, VERTICAL, CNC 1996 Fadal VMC-15 XT Fadal 88HS Very Good Yes 1996 Fadal VMC-15 XT Fadal 88HS M0185 $19500.00 0 Yes 38.5" x 16" 30" x 16" x 28" 7,500 40 21 Table Travels RPM Taper ATC
10551 MACHINING CENTERS, VERTICAL, CNC 1994 Fadal VMC-4020 Fadal 88HS Good Yes 47" x 20" Table, 40" x 20" x 28" Travels, 10,000 RPM, 40 Taper, 15 HP, 21 ATC, Rigid Tapping, Extended Z-Travel, 4th Axis Pre-Wired 1994 Fadal VMC-4020 Fadal 88HS M0185 $32500.00 0 Yes 47" x 20" 40" x 20" x 28" 10,000 40 21 Table Travels RPM Taper ATC
10297 MACHINING CENTERS, VERTICAL, CNC 2004 Fadal VMC-4020 HT Fadal 88HS Excellent Yes 47" x 20" Table, 40" x 20" x 28" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 30 ATC, Rigid Tapping, High Torque, Graphics, 422 K Memory, Cool Power 2004 Fadal VMC-4020 HT Fadal 88HS M0185 $49900.00 0 Yes 47" x 20" 40" x 20" x 20" 10,000 40 24 Table Travels RPM Taper ATC
10279 MACHINING CENTERS, VERTICAL, CNC 2005 Fadal VMC-4020 Fadal Multi-Processor CNC Very Good Yes 47" x 20" Table, 40" x 20" x 28" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 30 ATC, Rigid Tapping, High Torque, Graphics, 422 K Memory, Cool Power 2005 Fadal VMC-4020 Fadal Multi-Processor CNC M0185 $35000.00 0 Yes 48" x 20" 40" x 20" x 20" 10,000 40 21 Table Travels RPM Taper ATC
9908 MACHINING CENTERS, VERTICAL, CNC 1996 Fadal VMC-6030 HT Fadal 88HS Good Yes 1996 Fadal VMC-6030 HT Fadal 88HS M0185 $44500.00 0 Yes 62.5" x 30" 60" x 30" x 30" 10,000 40 21 Table Travels RPM Taper ATC
10092 MACHINING CENTERS, VERTICAL, CNC 1998 Fadal VMC-6030 Fadal 32MP CNC Good Yes 1998 Fadal VMC-6030 Fadal 32MP CNC M0185 $34950.00 0 Yes 62.5" x 30" 60" x 30" x 30" 10,000 40 30 Table Travels RPM Taper ATC
10225 MACHINING CENTERS, VERTICAL, CNC 1989 Fadal VMC-4020 HT Fadal 88 Good Yes 1989 Fadal VMC-4020 HT Fadal 88 M0185 $12500.00 0 Yes 47" x 20" 40" x 20" x 20" 10,000 40 21 Table Travels RPM Taper ATC
10108 MACHINING CENTERS, VERTICAL, CNC 2004 Fadal VMC-8030 HT Fadal 32MP CNC Very Good Yes 82.5" x 30" Table, 80" x 30" x 30" Travels, 10,000 RPM, 22.5 HP, 40 Taper, 21 ATC, Coolant Through Spindle, Rigid Tapping, High Speed CPU, Remote Jog Handle, High Torque Motor, Coolant System 2004 Fadal VMC-8030 HT Fadal 32MP CNC M0185 $72500.00 0 Yes 82.5" x 30" 80" x 30" x 30" 10,000 40 21 Table Travels RPM Taper ATC
10109 MACHINING CENTERS, VERTICAL, CNC 1997 Fadal VMC-15 XT Fadal 88HS Very Good Yes 1997 Fadal VMC-15 XT Fadal 88HS M0185 $21500.00 0 Yes 38.5" x 16" 30" x 16" x 20" 7,500 40 21 Table Travels RPM Taper ATC
9687 MACHINING CENTERS, VERTICAL, CNC 2001 Fadal VMC-8030 Fadal Multi-Processor CNC Very Good Yes 2001 Fadal VMC-8030 Fadal Multi-Processor CNC M0185 $69500.00 0 Yes 82.5" x 30" 80" x 30" x 30" 10,000 40 21 Table Travels RPM Taper ATC
8719 MACHINING CENTERS, VERTICAL, CNC 1994 Femco VMC-1685 Mitsubishi Meldas M-3 Good Yes 1994 Femco VMC-1685 Mitsubishi Meldas M-3 M0185 $36000.00 0 Yes 74.8" x 33.5" 63" x 31.5" x 27.6" 4,000 50 32 Table Travels RPM Taper ATC
10064 MACHINING CENTERS, VERTICAL, CNC 1989 Giddings and Lewis Model 10VS G&L 8000B Very Good Yes 1989 Giddings and Lewis Model 10VS G&L 8000B M0185 -1 Yes 54" x 26" 48" x 24" x 31.5" 4,000 50 40 Table Travels RPM Taper ATC
9929 MACHINING CENTERS, VERTICAL, CNC 1998 Haas VF-OE Haas 32 BIT Very Good Yes 36" x 14" Table, 30" x 16" x 20" Travels, 7,500 RPM, 40 Taper, 20 HP, 20 ATC, Chip Auger, Rigid Tapping, RS-232 Port, Brushless Servo, 4th Axis Ready, Haas HRT-160 Rotary Table, Quick Code, Programmable Coolant, 3.5" Floppy Drive, 22,802 On Time, 8,616 Cycle Start and 6,000 Cutting Hours, Only Cut Aluminum 1998 Haas VF-OE Haas 32 BIT M0185 $28500.00 -1 Yes 36" x 14" 30" x 16" x 20" 7,500 40 20 Table Travels RPM Taper ATC
10538 MACHINING CENTERS, VERTICAL, CNC 2004 Haas VF-2 SS Haas 32 BIT Very Good Yes 2004 Haas VF-2 SS Haas 32 BIT M0185 $62900.00 0 Yes 36" x 14" 30" x 16" x 20" 12,000 40 25 Table Travels RPM Taper ATC
10408 MACHINING CENTERS, VERTICAL, CNC 1999 Haas VF-10/40 Haas 32 BIT Good Yes 120" x 28" Table, 7,500 RPM, 40 Taper, 30 HP, 24 ATC, 4th Axis Interface, Rigid Tapping, 3.5" Floppy Drive, Programmable Coolant Nozzel, Coolant Through Spindle, Chip Auger, Haas HRT-310BL Fourth Axis Rotary Table, Two (2) Speed Gear Box, Fourth and Fifth Axis Interface, Renishaw MP10 Touch Probe 1999 Haas VF-10/40 Haas 32 BIT M0185 $118000.00 0 Yes 120" x 28" 120" x 32" x 30" 7,500 4 24 Table Travels RPM Taper ATC
8369 MACHINING CENTERS, VERTICAL, CNC 2000 Haas VF-3 Haas 32 BIT Good Yes 48" x 18" Table, 40" x 20" x 25" Travels, 7,500 RPM, 20 HP, 40 Taper, 20 ATC, 4th Axis Interface (no tables), Chip Auger, Programmable Coolant, Rigid Tapping, 1 MB Memory, 3.5" Floppy, RS-232 Port, High Intensity Lighting, Spindle Orientation 2000 Haas VF-3 Haas 32 BIT M0185 $34500.00 -1 Yes 48" x 18" 40" x 20" x 20" 7,500 40 21 Table Travels RPM Taper ATC
10353 MACHINING CENTERS, VERTICAL, CNC 2000 Haas VF-5/50 Haas 32 BIT Good Yes 52" x 23" Table, 50" x 26" x 25" Travels, 5,000 RPM, 50 Taper, 30 HP, 30 ATC, Programmable Coolant, Rigid Tapping, Remote Pulse Generator, Geared Head, 4th Axis Drive, 2000 Haas VF-5/50 Haas 32 BIT M0185 $76000.00 0 Yes 52" x 23" 50" x 26" x 25" 5,000 50 31 Table Travels RPM Taper ATC
10618 MACHINING CENTERS, VERTICAL, CNC 2007 Haas VF-2 Haas 32 BIT Very Good Yes 2007 Haas VF-2 Haas 32 BIT M0185 $68000.00 0 Yes 36" x 14" 30" x 16" x 20" 10,000 40 24 Table Travels RPM Taper ATC
10270 MACHINING CENTERS, VERTICAL, CNC 1997 Haas VF-9/40 Creative Evolution Good Yes 1997 Haas VF-9/40 Creative Evolution M0185 $89500.00 0 Yes 84" x 36" 84" x 40" x 30" 10,000 40 20 Table Travels RPM Taper ATC
10507 MACHINING CENTERS, VERTICAL, CNC 2007 Haas VF-9/50 Haas 32 BIT Very Good Yes 2007 Haas VF-9/50 Haas 32 BIT M0185 $195000.00 0 Yes 84" x 36" 84" x 40" x 30" 10,000 50 30 Table Travels RPM Taper ATC
10245 MACHINING CENTERS, VERTICAL, CNC 2001 Haas VF-5/40 Haas 32 BIT Very Good Yes 2001 Haas VF-5/40 Haas 32 BIT M0185 $55000.00 0 Yes 52" x 23" 50" x 26" x 25" 7,500 40 25 Table Travels RPM Taper ATC
10539 MACHINING CENTERS, VERTICAL, CNC 2006 Haas VF-2 SS YT Haas 32 BIT Very Good Yes 2006 Haas VF-2 SS YT Haas 32 BIT M0185 $69900.00 0 Yes 36" x 18" 30" x 20" x 20" 12,000 40 24 Table Travels RPM Taper ATC
10188 MACHINING CENTERS, VERTICAL, CNC 2006 Haas VF-4 SS Haas 32 BIT Very Good Yes 2006 Haas VF-4 SS Haas 32 BIT M0185 $77000.00 0 Yes 52" x 18" 50" x 20" x 25" 12,000 40 25 Table Travels RPM Taper ATC
10514 MACHINING CENTERS, VERTICAL, CNC 2006 Haas VF-4 Haas 32 BIT Very Good Yes 2006 Haas VF-4 Haas 32 BIT M0185 $79900.00 0 Yes 52" x 18" 50" x 20" x 25" 7,500 40 24 Table Travels RPM Taper ATC
10068 MACHINING CENTERS, VERTICAL, CNC 2008 Haas VF-11/50 Haas 32 BIT New, Never Used No 2008 Haas VF-11/50 Haas 32 BIT M0185 $235000.00 -1 Yes 120" x 28" 120" x 40" x 30" 7,500 50 31 Table Travels RPM Taper ATC
10459 MACHINING CENTERS, VERTICAL, CNC 2004 Haas VF-4 SS Haas 32 BIT Very Good Yes 2004 Haas VF-4 SS Haas 32 BIT M0185 $78000.00 0 Yes 52" x 18" 50" x 20" x 25" 12,000 40 25 Table Travels RPM Taper ATC
10478 MACHINING CENTERS, VERTICAL, CNC 1999 Haas VF-6/40 Haas 32 BIT Good Yes 1999 Haas VF-6/40 Haas 32 BIT M0185 $62000.00 0 Yes 64" x 28" 64" x 32" x 30" 7,500 40 24 Table Travels RPM Taper ATC
10549 MACHINING CENTERS, VERTICAL, CNC 1997 Haas VF-4 Haas 32 BIT Good Yes 1997 Haas VF-4 Haas 32 BIT M0185 $41000.00 0 Yes 52" x 18" 50" x 20" x 25" 7,500 40 20 Table Travels RPM Taper ATC
9989 MACHINING CENTERS, VERTICAL, CNC 1997 Haas VF-8/40 Haas 32 BIT Good Yes 1997 Haas VF-8/40 Haas 32 BIT M0185 $40000.00 -1 Yes 64" x 36" 64" x 40" x 30" 10,000 40 20 Table Travels RPM Taper ATC
10512 MACHINING CENTERS, VERTICAL, CNC 1997 Haas VF-9/40 Haas 32 BIT Very Good Yes 1997 Haas VF-9/40 Haas 32 BIT M0185 $98500.00 0 Yes 84" x 36" 84" x 40" x 30" 7,500 40 30 Table Travels RPM Taper ATC
10510 MACHINING CENTERS, VERTICAL, CNC 1997 Haas VF-4 Haas 32 BIT Good Yes 1997 Haas VF-4 Haas 32 BIT M0185 $28000.00 0 Yes 52" x 18" 50" x 20" x 25" 10,000 40 21 Table Travels RPM Taper ATC
10508 MACHINING CENTERS, VERTICAL, CNC 2000 Haas VF-3 Haas 32 BIT Very Good Yes 2000 Haas VF-3 Haas 32 BIT M0185 $36000.00 0 Yes 48" x 18" 40" x 20" x 25" 10,000 40 32 Table Travels RPM Taper ATC
9927 MACHINING CENTERS, VERTICAL, CNC 1995 Haas VF-4 Haas 32 BIT Good Yes 52" x 18" Table, 50" x 20" x 25" Travels, 7,500 RPM, 15 HP, 21 ATC, 4th Axis Interface, Quick Code, Rigid Tapping, Chip Auger, 3.5" Floppy Drive, Two Speed Geared Head, Programmable Coolant, RS-232 Port, 4th Axis Ready - Great Running Inexpensive Haas! 1995 Haas VF-4 Haas 32 BIT M0185 $26500.00 0 Yes 52" x 18" 50" x 20" x 25" 7,500 40 21 Table Travels RPM Taper ATC
10589 MACHINING CENTERS, VERTICAL, CNC 2000 Haas TM-1 Haas 32 BIT Excellent Yes 2000 Haas TM-1 Haas 32 BIT M0185 $24500.00 0 Yes 47.75" x 10.5" 30" x 12" x 16" 4,000 40 10 Table Travels RPM Taper ATC
7695 MACHINING CENTERS, VERTICAL, CNC 1998 Haas VF-5/40 Haas 32 BIT Good Yes 1998 Haas VF-5/40 Haas 32 BIT M0185 $59900.00 0 Yes 52" x 23" 50" x 26" x 25" 7,500 40 20 Table Travels RPM Taper ATC
10047 MACHINING CENTERS, VERTICAL, CNC 2005 Mazak Nexus VCN-510C Mazatrol Fusion 640 M Very Good Yes 2005 Mazak Nexus VCN-510C Mazatrol Fusion 640 M M0185 $74500.00 0 Yes 51.1" x 21.6" 41.3" x 20" x 20" 12,000 40 30 Table Travels RPM Taper ATC
10226 MACHINING CENTERS, VERTICAL, CNC 1990 Mazak VQC-15/40 Mazatrol M-32 Needs Repair Yes 35.4" x 16.1" Table, 22" x 16" x 15.75" Travels, 6,000 RPM, 10 HP, 16 Station ATC, Coolant System, Color CRT 1990 Mazak VQC-15/40 Mazatrol M-32 M0185 -1 On Way 35.4" x 16.1" 22" x 16" x 15.75" 6,000 40 16 Table Travels RPM Taper ATC
10138 MACHINING CENTERS, VERTICAL, CNC 2009 Mazak Votex 815/120 Fanuc 31iMA Very Good Yes 2009 Mazak Votex 815/120 Fanuc 31iMA M0185 $574000.00 0 Yes 127.56" x 31.9" 120" x 31.89" x 24.02" 13,000 50 60 Table Travels RPM Taper ATC
9584 MACHINING CENTERS, VERTICAL, CNC 1996 Mazak VTC-16B Mazatrol M-32B Good Yes 57.5" x 16.1"Table, 44" x 16" x 20" Travels, 7,000 RPM, 40 Taper, 15 HP, 24 ATC, EIA / ISO Input Function, Conversational Programming, Graphic Display, Helical Interpolation, Auto Tool Length Measurement, Rigid Tapping 1996 Mazak VTC-16B Mazatrol M-32B M0185 $25000.00 -1 Yes 57.48" x 16.1" 44.09" x 16.14" x 20.08" 7,000 40 24 Table Travels RPM Taper ATC
10065 MACHINING CENTERS, VERTICAL, CNC 1998 Mazak MTV-655 / 80N Mazatrol M-Plus Very Good Yes 1998 Mazak MTV-655 / 80N Mazatrol M-Plus M0185 $96000.00 -1 Yes 88" x 25" 78.74" x 25.6" x 25.6" 6,000 50 30 Table Travels RPM Taper ATC
9583 MACHINING CENTERS, VERTICAL, CNC 1999 Mazak VTC-16B Mazatrol Fusion 640 M Very Good Yes 57.5" x 16.1"Table, 44" x 16" x 20" Travels, 7,000 RPM, 40 Taper, 15 HP, 24 ATC, EIA / ISO Input Function, Conversational Programming, Graphic Display, Helical Interpolation, Auto Tool Length Measurement, Rigid Tapping 1999 Mazak VTC-16B Mazatrol Fusion 640 M M0185 $32500.00 -1 Yes 57.48" x 16.1" 44.09" x 16.14" x 20.08" 8,000 40 24 Table Travels RPM Taper ATC
10610 MACHINING CENTERS, VERTICAL, CNC 1996 Mazak VTC-20B Mazatrol M-32B Fair Yes 1996 Mazak VTC-20B Mazatrol M-32B M0185 $18000.00 0 Yes 57.48" x 20.1" 44.09" x 20.08" x 20.08" 8,000 40 24 Table Travels RPM Taper ATC
10487 MACHINING CENTERS, VERTICAL, CNC 1995 Mazak V-655 / 80 Mazatrol T-32 Good Yes 1995 Mazak V-655 / 80 Mazatrol T-32 M0185 $76500.00 0 Yes 68.5" x 25.59" 78" x 25.59" x 25.59" 6,000 50 30 Table Travels RPM Taper ATC
9988 MACHINING CENTERS, VERTICAL, CNC 1998 Mazak MTV-655 / 80N Mazatrol M-Plus Good Yes 1998 Mazak MTV-655 / 80N Mazatrol M-Plus M0185 $96000.00 -1 Yes 88" x 25" 78.74" x 25.6" x 25.6" 6,000 50 30 Table Travels RPM Taper ATC
10534 MACHINING CENTERS, VERTICAL, CNC 2000 Mazak VTC-300C Mazatrol Fusion 640 M Very Good Yes 2000 Mazak VTC-300C Mazatrol Fusion 640 M M0185 $112000.00 0 Yes 78.74" x 30" 65.35" x 30" x 26" 10,000 40 24 Table Travels RPM Taper ATC
10497 MACHINING CENTERS, VERTICAL, CNC 2004 Mazak Nexus VCN-410A Mazatrol Fusion 640 M Good Yes 2004 Mazak Nexus VCN-410A Mazatrol Fusion 640 M M0185 $52500.00 0 Yes 35.43" x 16.14" 22.05" x 16.14" x 20.08" 12,000 40 30 Table Travels RPM Taper ATC
9610 MACHINING CENTERS, VERTICAL, CNC 1998 Mazak VTC-20B Mazatrol Fusion 640 M Good Yes 1998 Mazak VTC-20B Mazatrol Fusion 640 M M0185 $42500.00 0 Yes 57.4" x 20.08" 44.09" x 20.08" x 20.08" 8,000 40 24 Table Travels RPM Taper ATC
8843 MACHINING CENTERS, VERTICAL, CNC 1999 Mighty Viper VMC-950 Mitsubishi Magic 640 Very Good Yes 50" x 18" Table, 40" x 20" x 24.8" Travels, 8,000 RPM, 40 Taper, 25 HP, 21 ATC, Color Graphic Control, Remote Jog Handle, Chip Auger, Chip Flood Wash System, Hard Drive, Mighty Chip Cart, 3,000 Hours On Machine. Control Completely Rebuilt By Mitsubishi March 2005 1999 Mighty Viper VMC-950 Mitsubishi Magic 640 M0185 $24500.00 -1 Yes 50" x 18" 40" x 20" x 24.8" 8,000 40 21 Table Travels RPM Taper ATC
10380 MACHINING CENTERS, VERTICAL, CNC 1995 Mighty Comet VMC-1100 PH Control ??? Good Yes 1995 Mighty Comet VMC-1100 PH Control ??? M0185 -1 On Way 49" x 24" 42" x 22" x 25" 8,000 40 24 Table Travels RPM Taper ATC
10604 MACHINING CENTERS, VERTICAL, CNC 1999 Mighty Viper VMC-2100 Fanuc 18M Very Good Yes 83" x 41.3" Table, 81" x 41.3" x 32.3" Travels, 6,000 RPM, 30 HP, 50 Taper, 30 ATC, Full Enclosure, Air Blast Through Spindle, Glass Scales, Spindle Chiller, Color Monitor With Graphics, Chip Auger 1999 Mighty Viper VMC-2100 Fanuc 18M M0185 $89900.00 0 Yes 83" x 41.3" 81" x 41.3" x 32.3" 6,000 50 30 Table Travels RPM Taper ATC
9168 MACHINING CENTERS, VERTICAL, CNC 2000 Mighty Viper VMC-1600 A Mitsubishi Magic 640 Very Good Yes 2000 Mighty Viper VMC-1600 A Mitsubishi Magic 640 M0185 $74900.00 0 Yes 66.9" x 29.5" 63" x 31" x 23.5" 8,000 40 32 Table Travels RPM Taper ATC
9516 MACHINING CENTERS, VERTICAL, CNC 1998 Milltronics VM-24 Centurion 6 Very Good Yes 1998 Milltronics VM-24 Centurion 6 M0185 $24500.00 0 Yes 45" x 24" 40" x 24" x 24" 6,000 40 20 Table Travels RPM Taper ATC
9420 MACHINING CENTERS, VERTICAL, CNC 1996 Milltronics Partner Centurion 7 Very Good Yes 1996 Milltronics Partner Centurion 7 M0185 $20000.00 -1 Yes 45" x 16" 34" x 16" x 20" 6,000 40 12 Table Travels RPM Taper ATC
9763 MACHINING CENTERS, VERTICAL, CNC 2000 Milltronics CSS-1000 CGI Centurion 6 SLS Very Good Yes 45" x 16" Table, 30" x 16" x 16" Travels, 8,000 RPM, 24 HP, 20 ATC, Reverse Engineering 2000 Milltronics CSS-1000 CGI Centurion 6 SLS M0185 $58000.00 -1 Yes 45" x 16" 30" x 16" x 20" 8,000 40 20 Table Travels RPM Taper ATC
9943 MACHINING CENTERS, VERTICAL, CNC 2006 Milltronics RH-33 XP Centurion 7 Very Good Yes 2006 Milltronics RH-33 XP Centurion 7 M0185 $69900.00 0 Yes 86" x 32" 78" x 33" x 28" 15,000 40 24 Table Travels RPM Taper ATC
10070 MACHINING CENTERS, VERTICAL, CNC 1999 Mitsubishi MV-70E Mitsubishi 520M Very Good Yes 1999 Mitsubishi MV-70E Mitsubishi 520M M0185 $59500.00 0 Yes 65" x 27.6" 49.2" x 27.6" x 25.6" 12,000 50 40 Table Travels RPM Taper ATC
10112 MACHINING CENTERS, VERTICAL, CNC 1985 Mitsui-Seiki VR-3A Fanuc 6M Good Yes 29.5" x 20.08" Table, 27.56" x 17.7" x 17.7" Travels, 6,000 RPM, 40 Taper, 10 HP, 20 ATC, Coolant System, Remote Jog Handle 1985 Mitsui-Seiki VR-3A Fanuc 6M M0185 $34000.00 -1 Yes 29.5" x 20.08" 27.56" x 17.7" x 17.7" 6,000 40 20 Table Travels RPM Taper ATC
10503 MACHINING CENTERS, VERTICAL, CNC 1995 Monarch VMC-175B Fanuc 16M Good Yes 1995 Monarch VMC-175B Fanuc 16M M0185 $49500.00 0 Yes 84" x 30" 76" x 44" x 36" 6,000 50 30 Table Travels RPM Taper ATC
10603 MACHINING CENTERS, VERTICAL, CNC 1997 Monarch VMC-150B Fanuc 16MB Good Yes 1997 Monarch VMC-150B Fanuc 16MB M0185 $59500.00 0 Yes 64" x 30" 50" x 30" x 26" 6,000 50 30 Table Travels RPM Taper ATC
9996 MACHINING CENTERS, VERTICAL, CNC 2000 Mori-Seiki SV-500 B / 40 Fanuc 18M Very Good Yes 43.31" x 23.62" Table, 31.5" x 20.08" x 20.08" Travels, 10,000 RPM, 22 HP, 30 ATC, Rigid Tapping, Helical Interpolation 2000 Mori-Seiki SV-500 B / 40 Fanuc 18M M0185 $69000.00 0 Yes 43.31" x 23.62" 31.5" x 20.08" x 20.08" 10,000 40 30 Table Travels RPM Taper ATC
10581 MACHINING CENTERS, VERTICAL, CNC 2010 Mori-Seiki NV-7000 / 50 Mori-Seiki MSX-701 IV Like New Yes 2010 Mori-Seiki NV-7000 / 50 Mori-Seiki MSX-701 IV M0185 $325000.00 0 Yes 67" x 30" 40.2" x 20.1" x 20.1" 8,000 50 30 Table Travels RPM Taper ATC
9998 MACHINING CENTERS, VERTICAL, CNC 2000 Mori-Seiki SV-503 B / 40 Fanuc 18M Good Yes 52" x 23.6" Table, 31.5" x 20.1" x 20.1" Travels, 10,000 RPM's, 50 Taper, 30 HP, 30 ATC, 1,653 Rapids 2000 Mori-Seiki SV-503 B / 40 Fanuc 18M M0185 $89000.00 0 Yes 43.3" x 23.6" 31.5" x 20.1" x 20.1" 10,000 50 30 Table Travels RPM Taper ATC
9971 MACHINING CENTERS, VERTICAL, CNC 2003 Mori-Seiki NV-5000A / 50 Mitsubishi MSC-501 (18iMA) Very Good Yes 2003 Mori-Seiki NV-5000A / 50 Mitsubishi MSC-501 (18iMA) M0185 $99000.00 0 Yes 43.3" x 23.6" 31.5" x 20.1" x 29.1" 8,000 50 30 Table Travels RPM Taper ATC
9571 MACHINING CENTERS, VERTICAL, CNC 2003 Mori-Seiki NV-5000A / 40 Mitsubishi MSC-501 (18iMA) Excellent Yes 2003 Mori-Seiki NV-5000A / 40 Mitsubishi MSC-501 (18iMA) M0185 $136500.00 0 Yes 43.3" x 23.6" 31.5" x 20.1" x 20.1" 12,000 40 30 Table Travels RPM Taper ATC
8991 MACHINING CENTERS, VERTICAL, CNC 1992 Mori-Seiki MV-65 Yasnac I80M Very Good Yes 1992 Mori-Seiki MV-65 Yasnac I80M M0185 $112000.00 0 Yes 66.93" x 25.59" 60" x 25.6" x 25.6" 4,000 40 30 Table Travels RPM Taper ATC
9311 MACHINING CENTERS, VERTICAL, CNC 2004 Mori-Seiki Duracenter 5 Mori-Seiki MSX-501 Very Good Yes 2004 Mori-Seiki Duracenter 5 Mori-Seiki MSX-501 M0185 $72000.00 0 Yes 43.3" x 23.6" 31.5" x 20.1" x 20.1" 12,000 40 20 Table Travels RPM Taper ATC
9383 MACHINING CENTERS, VERTICAL, CNC 1989 Mori-Seiki MV-JR Yasnac MX-3 Good No 1989 Mori-Seiki MV-JR Yasnac MX-3 M0185 $15500.00 -1 Yes 35.4" x 17.7" 22" x 16.1" x 16.1" 8,000 40 20 Table Travels RPM Taper ATC
10511 MACHINING CENTERS, VERTICAL, CNC 2005 Mori-Seiki NV-5000A1B / 40 Fanuc 18iM Very Good Yes 2005 Mori-Seiki NV-5000A1B / 40 Fanuc 18iM M0185 $119500.00 0 Yes 52" x 23.6" 40.2" x 20.1" x 20.1" 14,000 40 30 Table Travels RPM Taper ATC
9855 MACHINING CENTERS, VERTICAL, CNC 2006 Mori-Seiki NV-5000A / 40 Fanuc 18M Good Yes 2006 Mori-Seiki NV-5000A / 40 Fanuc 18M M0185 $125000.00 0 Yes 43.3" x 23.6" 31.5" x 27.95" x 20.1" 8,000 50 30 Table Travels RPM Taper ATC
8742 MACHINING CENTERS, VERTICAL, CNC 1985 Mori-Seiki MV-JR Yasnac MX-2 Good Yes 1985 Mori-Seiki MV-JR Yasnac MX-2 M0185 $15000.00 -1 Yes 35" x 17" 22" x 16" x 18" 6,000 40 30 Table Travels RPM Taper ATC
9392 MACHINING CENTERS, VERTICAL, CNC 2003 Mori-Seiki NV-5000A / 50 Mitsubishi MSC-501 (18iMA) Very Good Yes 2003 Mori-Seiki NV-5000A / 50 Mitsubis