Used Machine Tools 24-7
All The CNC and Manual Machine Tools You Need - All Of The Time.
Office (352) 799-8398
Fax (352) 799-0315
Click Here to Email Us
Copyright © 2012 Machine Tools 24-7. All Rights Reserved.
Click Here to Bookmark this Site

Machine Tools 24-7

Phone 352-799-8398 - Fax 352-799-0315

Email: Sales Staff

At Machine Tools 24-7 we never stop working to serve your machine tool needs

Machine Tools 24-7 Machine Quote - Click on the Machine ID Number Below to View Machine Photos Separately 

Below are the specs we have on file for this machine.  Please contact Machine Tools 24-7 if you have any questions.

Machine IDYearManufacturerModelControl
166292005OkumaLT-200 MYOSP-P100L

 DescriptionSpec Values
Capacity:Swing / Swing Over Cross Slide15.75" / 12.2"
 Maximum Cutting Diameter8.27"
 Maximum Turning Length / Distance Between Spindles21.26" / 37.80"
Main Spindle:Speeds45 - 4,500 RPM
 Spindle Bore / Bar Capacity / Spindle Nose2.44" / 2" / A2-6
 Main Motor (30 min / continuous)15 / 10 HP
Sub-Spindle:Speeds45 - 4,500 RPM
 Spindle Bore / Bar Cap / Spindle Nose2.44" / 2" / A2-6
 Motor (30 min. / cont.)15 / 10 HP
Turrets:Number of Positions (turret one / turret two) All Live12 / 12 Tools Each
Travels:X-Axis Travel (turret one / turret two)7.56" / 7.56"
 Z-Axis Travel (turret one / turret two)27.561" / 27.561"
 Y-Axis Travel (turret one)+/- 3.62"
 B-Axis Travel (sub-spindle)28.74"
Rotary Tools:Rotary Tool Speed50 - 6,000 RPM
 Rotary Tool Motor (turret one / turret two)5.4 HP
Rapids:Rapid Traverse (X / Z / Y)1,181 / 1,574 / 1,024 IPM
 Sub Spindle Rapid Traverse1,574 IPM
Dimensions:Floor Space (L x W x H)105" x 88" x 88"
 Weight (approx)16,000 Lbs

 Equipped With
Additional Info.:10" 3-Jaw Hydraulic Chuck Main, 8" 3-Jaw Hydraulic Chuck Sub
 Standard Tool Holders
 Barfeed Interface
 Parts Catcher
 User Task II
 Parts Ejector
 Synchronous Tapping
 Helical Cutting
 Thermal Compensation
 Lap 4
 Nose Radius Compensation
 Auto Chamfering
 3D Animation
 Spindle Orientation
 Torque Limiter
 Tool Life Management
 Tool Wear Compensation
 Full C-Axis on Main and Sub-Spindle

Click Here To Print Quote - 16629

Click Here To Email Quote Request - 16629

TERMS: Cash or Cashiers Check with order, and all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold "As Is, Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties, which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. -EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use, operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. - INDEMNIFICATION: Buyer/User agrees to Indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchasers responsibility to verify machine condition, specifications and pay any and all applicable taxes.


ManufacturerModelMachine IDMachine Photos
OkumaLT-200 MY16629 LT-200 MY.jpg
OkumaLT-200 MY16629 LT-200 MY 1.jpg
OkumaLT-200 MY16629 LT-200 MY 2.jpg
OkumaLT-200 MY16629 LT-200 MY 3.jpg

Quick Links