| Manufacturer | Model | Year | Machine ID | Type Machine | Control | Condition | U / P | ShortSpecs | Photos | List |
| DMG Mori | NT-1000 Ge2 SZM | 2015 | 16787 | LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE | Mori-Seiki MSX-711 V | Very Good | Yes | 14.5" Swing, 14.5" Turn Dia., 21" Centers, 6,000 RPM, 15 HP, 1-40 ATC + 1 - 10 Sta. Turrets, 8" Collet Chuck Main and Sub, Bar Feed Interface, Bar Feed, More. | Yes | 2015 DMG Mori NT-1000 Ge2 SZM Mori-Seiki MSX-711 V |
| Doosan | MX-2000 ST | 2006 | 16612 | LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iTB | Good | Yes | 29.5" Swing, 23.6" SOC, 21.65" Turning Dia., 40" Turning Length, 5,000 RPM, 2.625" Bar Cap., 25 HP, Chip Conveyor, 8" 3-Jaw Hydraulic Chucks, Chip Conveyor, High Pressure Coolant, More | Yes | 2006 Doosan MX-2000 ST Fanuc 18iTB |
| Mazak | Integrex 100 III ST | 2004 | 16662 | LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE | Mazatrol Fusion 640 Pro | Good | Yes | Swing 21.46", Maximum Turning Diameter 21.46", Maximum Length 29.65", 6,000 RPM Main & Sub, 15 HP, 2" Bar Capacity, 6" 3-Jaw Hydraulic Chucks, Coolant Through Tool, Much More.. | Yes | 2004 Mazak Integrex 100 III ST Mazatrol Fusion 640 Pro |
| Mori-Seiki | DL-150 | 1998 | 16514 | LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE | Mitsubishi MSC-518L (18iTT) | Very Good | Yes | 11.02" Swing, 7.8" Turn Dia., 5,000 RPM, 10 HP, 2-12 Sta. Turret, Collet Chuck on Main and 6" 3-Jaw Hydraulic on Sub-Spindles, Tool-Eye Ready, Chip Conveyor, More.. | Yes | 1998 Mori-Seiki DL-150 Mitsubishi MSC-518L (18iTT) |
| Mori-Seiki | NT-1000 SZM | 2010 | 16754 | LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE | Mori-Seiki MSX-701 IV | Good | Yes | 14.5" Swing, 14.5" Turn Dia., 21" Centers, 6,000 RPM, 15 HP, 1-40 ATC + 1 - 10 Sta. Turrets, 8" Collet Chuck Main and Sub, Bar Feed Interface, Bar Feed, More. | Yes | 2010 Mori-Seiki NT-1000 SZM Mori-Seiki MSX-701 IV |
| Mori-Seiki | NT-3200 DCG - 1000 SZ | 2006 | 16513 | LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE | Mori-Seiki MSX-711 (Fanuc 31iT) | Very Good | Yes | 23.6" Swing, 23.6" Turn Dia., 49.4" Centers, 5,000 RPM, 20 HP, 40 ATC, 12 Sta. Turret, 8" 3-Jaw Hydraulic Chucks, Tool Life Management System, High Pressure Coolant, More.. | Yes | 2006 Mori-Seiki NT-3200 DCG - 1000 SZ Mori-Seiki MSX-711 (Fanuc 31iT) |
| Nakamura-Tome | TW-20MMY | 2003 | 16703 | LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iTB | Good | Yes | | Yes | 2003 Nakamura-Tome TW-20MMY Fanuc 18iTB |
| Okuma | LU-3000 EX 2SW | 2014 | 16656 | LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE | OSP-P300L | Excellent | Yes | Swing Over Bed 22.84", Swing Over Cross Slide 18.5", Maximum Turning Diameter 16.5", Length 23.81", 5,000 RPM, 30 HP, 12 + 8 Sta. Turrets, 8" 3-Jaw Chuck, Sub-Spindle, Rigid Tapping, Tool Pre-Setter, Parts Catcher, More.. | Yes | 2014 Okuma LU-3000 EX 2SW OSP-P300L |
